7. Do not block any ventilation openings. Install in accordance with manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifi ers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fi t
into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specifi ed by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specifi ed by the manufacturer, or sold with
the apparatus.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualifi ed service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
15. The product was submitted and evaluated for use at the maximum ambient (Tma)ἁ 40°C
16. WARNING: To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Apparatus To
Rain Or Moisture. Apparatus shall not be exposed to dripping or splashing and no objects fi lled with
liquids, such as vases, shall be placed on the apparatus..
CAUTION
RISK OF ELECTRIC SHOCK!
DO NOT OPEN!
ATTENTION ! RISQUE DE CHOC ! ÉLECTRIQUE PAS OUVRIR !
The lightning fl ash with arrowhead symbol, within an equilateral triangle, is intended to alert
the user to the presence of uninsulated dangerous voltage within the product's enclosure
that may be a suffi cient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature
accompanying the appliance.
Le symbole de l'éclair avec une fl èche à son extrémité, dans un triangle équilatéral, a pour
but de vous avertir de la présence d'une « tension électrique dangereuse » et non isolée à
l'intérieur de l'enceinte de l'appareil, qui peut être suffi samment puissante pour constituer
un risque d'élctrocution pour les personnes
Le point d'excalamation dans un triangle équilatéral vous avertit de l'existence d'instructions
importantes de fonctionnement et d'entretien (intervention) dans la documnetation
accompagnant l'appareil.
3 of 16
ISSUED: 08-30-13 SHEET #: 180-9051-1
17. Avoid overloading electrical outlets or extension cords which otherwise could result in electric
shock or fi re.
18. To avoid electric shock, never stick anything in the slots on the case or remove the cover.
19. This product is intended for indoor use only.
20. The apparatus shall be connected to a mains socket outlet with a protective earthing connection.
Model:ADS100-A252
FCC ID: 2AAW2ADS100-A252
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Model:ADS100-T8
FCC ID: 2AAW2ADS100-T8
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Important Information
• Never use this product in an aircraft or a medical facility. It can cause interference or an
undesirable effect.
• The use of this product in the following locations may result in an abnormal audio output (noise,
etc,).
ºNear a refrigerator or metal structure.
ºIn a cluttered room, causing potential blocked wireless signals.
• This product has been tested and manufactured to comply with each country’s safety rules.
However, there is no guarantee that interference will not occur in some installations. If
interference happens, decrease the distance between the product and receiving antenna.
• Optimal use of this product is for in-room/multi-room applications with a range of up to 140 ft.
(43m) away line-of-sight (LOS). This distance is reduced slightly when objects like walls and
fl oors are in the transmission path.
• Any changes or modifi cations not expressly approved by the manufacturer of this device could
void the product warranty.
• This equipment must be installed and operated in accordance with the provided instructions.
End users and installers must be provided with installation instructions and Transmitter operating
conditions for satisfying RF exposure compliance.
• This device should be used only as specifi ed within this manual to meet RF exposure
requirements. Use of this device in a manner inconsistent with this manual could lead to
excessive RF exposure conditions.
Unit Care Recommendations
To clean, use a soft, dry cloth only. Do not use water or other cleaning products as they may cause
electrical failure or damage the surface of the product.
4 of 16
ISSUED: 08-30-13 SHEET #: 180-9051-1
SPECIFICATIONS
T8 Transmitter
• Size: 17 ¼”w x 1 11/32” h x 7”d
• Rack Height: 1U
• Power Input: 120/240 VAC 50/60Hz to supplied AC adapter (5VDC @ 1000 mW)
• Line Level Inputs: Qty 8 independent RCA
• Speaker Level Inputs: Qty 8 independent, 150 watts max each, 2 pole plug
• Mounting: Rack or surface
• Frequency band: 2.4 GHz, spread spectrum
• Wireless distance: 140 ft*
• Streaming: 16 Bit, 48 KHz rate with error checking
• Adaptive Frequency Hopping:Yes, 18 channels with 4 active, 14 on trial
• Latency: 42.7 mS
• Antenna cable: RG316D Coax, double shield with reverse thread fi ttings, 10 ft.
• Agency Approvals: UL60065, CE, LVD, FCC
* Actual distance will be reduced with obstructions between transmitter and receiver modules
A252 Amplifi er
• Size: 4”h x 4 1/8”w x 1 ½”d
• Power Input: 100/240 VAC 50/60Hz direct, 150 watts maximum (with protective
ground required)
• Power Connection: 2 wire spring hold push in, screw terminal ground, wired or conduit per
Electric Code