KIL540, KIL540-S, KIL540-EUK,
KIL542, KIL542-S, KIL542-EUK,
KIL546, KIL546-S, KIL546-EUK,
KIL547, KIL547-S, KIL547-EUK,
KIL555, KIL555-S, KIL555-EUK
ENG
1
2014-20-03 #:150-9017-2 06-04-14
WARNING
ENG - Do not begin to install product until you have read and understood the instructions and warnings
contained in this user guide. This product is designed to be installed on wood stud, solid concrete or cinder
block walls. Hardware is included for wood stud, solid concrete and cinder block installation. Before installing
make sure the supporting surface will support the combined load of the equipment and hardware. Screws must
be tightly secured. Do not overtighten screws or damage can occur and product may fail. Never exceed the
Maximum Load Capacity. Always use an assistant or mechanical lifting equipment to safely lift and position
equipment. This product is intended for indoor use only. Use of this product outdoors could lead to product
failure or personal injury. To reduce the risk of electric shock or fi re, do not expose product to water or moisture.
Be sure power cord is routed so that it will not be tripped on, stepped on, or pinched by heavy items. Avoid
overloading electrical outlets or extension cords. Always disconnect the power cord from the power outlet
when installing, servicing, or not using the product for an extended period of time. Do not block ventilation
slots or fan exhaust on product. Blocking airfl ow could damage product. Arrange product to allow air to fl ow
freely around product. Keep product away from direct sunlight or any source of heat. For support please call
800-4- SIGNAGE.
ENG
Symbols
ENG
WARNING
x3
Screws must get at least three
ENG
ENG
Do not overtighten screws.
ENGTwo person lift.
ENG
#
Skip to step.
full turns and fi t snug.
ENG
Tools Needed for Assembly.
2
2014-20-03 #:150-9017-2 06-04-14
ENG
Parts (Before beginning, make sure you have all parts shown below).
Parts List
Description Qty
A kiosk BLK
kiosk SLV
B M5 x 12mm Pan Phl
screw
C M5 X 25mm Pan Phl
screw
D M6 x 12mm Pan Phl
screw
E M6 x 25mm Pan Phl
screw
F M8 x 12mm Pan Phl
screw
G M8 x 25mm Pan Phl
screw
H M5/M4/M6 multi washer 4 580-1398 580-1398 580-1398 580-1398 580-1398
I 1/4"spacer 4 540-1059 540-1059 540-1059 540-1059 540-1059
J key 2 565-0049A 565-0049A 565-0049A 565-0049A 565-0049A
K 6x1 wrench 1 560-9646 560-9646 560-9646 560-9646 560-9646
(1)
A
kiosk
KIL540
KIL540-S
KIL540-EUK
Part #
1 150-P1169
150-4169
4 520-1027 520-1027 520-1027 520-1027 520-1027
4 520-9543 520-9543 520-9543 520-9543 520-9543
4 520-1128 520-1128 520-1128 520-1128 520-1128
4 520-1208 520-1208 520-1208 520-1208 520-1208
4 520-9571 520-9571 520-9571 520-9571 520-9571
4 520-1031 520-1031 520-1031 520-1031 520-1031
KIL542
KIL542-S
KIL542-EUK
Part #
150-P1170
150-4170
B (4)
M5 x 12 mm
KIL546
KIL546-S
KIL546-EUK
Part #
150-P1171
150-4171
KIL547
KIL547-S
KIL547-EUK
Part #
150-P1172
150-4172
C (4)
M5 x 25 mm
KIL555
KIL555-S
KIL555-EUK
Part #
150-P1172
150-4172
(1)
K
6x1 wrench
J
(2)
key
D (4)
M6 x 12 mm
F (4)
M8 x 12 mm
H (4)
M5/M4/M6 washer
3
E (4)
M6 x 25 mm
G (4)
M8 x 25 mm
I (4)
spacer
2014-20-03 #:150-9017-2 06-04-14
1
J
(2)
4
2014-20-03 #:150-9017-2 06-04-14
2
3
K
5
2014-20-03 #:150-9017-2 06-04-14