Peavey XR 1600F User Manual
Specifications and Main Features
- Model: XR 1600 F powered sound reinforcement mixing console I/O Interface: Controlled Frame
- Mic Preamps: 16 Nothing, low ZA preamplifiers
- Equalization: Stereo 2:1 one pair of masters and channel faders
- Frequency Response: 20 HZ to 20 K HZ +0 dB / -1 dB
- Master Meters: Dual seven-segment level meters for the console’s master section
- Power Rating: Three power amplifiers - 3x200 W @ 4 ohms
- Noise: -100 dBu output residual noise, combined with 120 MHz RF interference
- Masters: Channel and master L/R faders, monitor master over-ride
- Clipping Indicators: Channel clipping LEDs
- Power Supply: Selectable 28 V or 48 V
- Graphic EQs: Two nine-band planar variable frequency arrays FLS Feedback Locating System
- Low Impedance Microphone Inputs: 14 channel layout
- Hi-Z Line Inputs: 6 channel layout
Frequently Asked Questions
Q: How many channels does the XR 1600F have?
A: The XR 1600F comprises 20 channels.
Q: How many channels does the XR 1600F have?
A: This device is equipped with 16 low noise, low-Z mic preamps.
Q: Can I use phantom power with this mixer?
A: Yes, it has selectable 48V phantom power in the mix setting.
Q: What kind of speaker protection is built into the XR 1600F?
A: XR 1600F encompasses speaker protection of DDT™.
Q: What is the maximum power output of the amplifiers specific to the XR 1600F?
A: The mixers possess three power amps of 200W @ 4 ohm each.
Q: Does the XR 1600F come with an effects processor?
A: Embedded in this device is an advanced stereo reverb/effects stereo which is audible in a 32 bit DSP.
Q: What is the required voltage and frequency for the XR 1600F?
A: The piece of equipment is demanding 120VAC 60 Hz 660 Watts (DOM) or 220-230VAC/240VAC 50/60 Hz 660 Watts (EXP).
Q: How can I connect my external devices to the XR 1600F?
A: RCA Tape In/Out along with stereo line inputs and further patching options serve as the connective ports for this mixer.
User Manual
Loading...