Partlow 3200 1/32 DIN Data Sheet
Features
Functions
Three term PID controller, indicator with alarms or indicator only versions available
Control Types
Controller versions have PID with Easy-tune, manual tuning plus pre-tune or On-Off control
Setpoint Lock
Limits operator access to the controller setpoint value
Output Configuration
Up to 3 Total. Max 1 for control, max 2 for Alarms
Alarm 1 & 2 Types
Process high, process low, setpoint deviation and band
Human Interface
3 button operation, 4 digit 10mm high LED display (available in either red or green), plus on-control,
set-up, alarm and setpoint indicators
Input
Thermocouple
J, K, R, S, T, B, & N
RTD
3 Wire PT100, 50 per lead maximum (balanced)
DC Linear
0-20mA, 4-20mA, 0-50mV, 10-50mV. Scaleable -1999 to 9999, decimal point as required
Impedance
>10M for Thermocouple and mV ranges, 4.7 for mA ranges
Accuracy
+/- 0.1% of input span (0.25% for J & T T/C) +/- 1 LSD (T/C CJC better than 0.7°C)
Sampling
4 per second, 14 bit resolution approximately
Sensor Break Detection
<2 seconds (except on 0-20mA range), control O/P’s turn off, high alarms activate for T/C and mV
ranges, low alarms activate for RTD, mA ranges
Outputs & Options
Control & Alarm Relays
Contacts SPDT 2Amp resistive at 240V AC, >500,000 operations (if comms or 2nd relay is fitted, all
relay contacts become SPST)
Control SSR Outputs
Drive capability >10V DC into 500 minimum
Communications
2 Wire RS485, 1200 to 9600 Baud, Modbus
Operating & Environmental
Temperature & RH
0 to 55°C (-20 to 80°C storage), 20% to 95%RH non-condensing
Power Supply
100 to 240V 50/60Hz 7.5VA (optional 12 to 24V AC 7.5VA /12 to 30V DC 4W)
Front Panel Protection
IEC IP66 (Behind panel protection is IP20)
Approvals and Certification
CE, UL & ULc
Partlow 3200 1/32 DIN
Indicator & Controller
Red or Green Display
Two process alarms
Manual or Easy Tune
Setpoint Lock
On Control Indicator
RS485 comms
0.1% Accuracy
The Partlow 3200 is available as an indicator or controller. Small size does not come at the expense of features,
they have large 10mm high displays, 2 amp relays and full 3-wire PT100 inputs. The controller features our
hands-free Easy Tune PID algorithm
Specification
Ref DS-N2300-1-1209-EN
© West Control Solutions 2009
Dimensions
Connection Details
45mm +0.6
22mm +0.3
100mm
49mm
25mm
10mm (approx)
Hardware options cannot be retrofitted to this model. Some reconfiguration of existing features is
possible
Input
Configurable to any available type.
No extra parts require
Control/Alarm 1 Output
Re-configurable on controller version
only, as relay control with SSR alarm 1,
or SSR control with relay alarm 1.
No extra parts required
Other Options
RS485 comms or alarm 2 relay is only
available at time of order.
No field re-configuration is possible
Field Reconfiguration
Ref DS-N2300-1-1209-EN
© West Control Solutions 2009
Loading...