Partlow 1160+, 1800+, 1400+ Data Sheet

Partlow 1160+, 1800+, 1400+ Temperature & Process Controllers

 Jumperless Configuration  Auto Detected Hardware  Process & Loop Alarms  Modbus & ASCII Comms  Auto or Manual Tuning  Heat/Cool Operation  Ramping Setpoint  Remote/Dual Setpoint Options  Available in 1/16, 1/8 & 1/4 DIN Formats

With their improved interface, technical functionality and field flexibility, the Partlow 1160+, 1800+ and 1400+ give

you the best in comprehensive control for most temperature and process control loops.

Specification

Features

Control Types Full PID with Pre-tune, Self-tune, manual tuning, or On-Off control. Heat only or heat & cool Auto/Manual

Output Configuration Up to 3 possible, for control, alarm, 24VDC transmitter power supply or retransmit of process value or

Alarm 1 & 2 Types Process high, process low, SP deviation, band, logical OR / AND. Also 1 loop alarm for process control

Human Interface 4 button operation, dual 4 digit 10mm & 8mm high (6100+, 8100+) and 13mm & 10mm high (4100+)

PC Configuration Off-line configuration from PC serial port to dedicated config socket (comms option not required).

Input

Thermocouple J, K, C, R, S, T, B, L, N & PtRh20%vsPtRh40%. RTD 3 Wire PT100, 50Ω per lead maximum (balanced) DC Linear 0 to 20mA, 4 to 20mA, 0 to 50mV, 10 to 50mV, 0 to 5V, 1 to 5V, 0 to 10V, 2 to 10V.

Impedance >10MΩ for Thermocouple and mV ranges, 47KΩ for V ranges and 5Ω for mA ranges Accuracy ±0.1% of input range ±1 LSD (T/C CJC better than 1°C) Sampling 4 per second, 14 bit resolution approximately Sensor Break Detection <2 seconds (except zero based DC ranges), control O/P’s turn off, high alarms activate for T/C and mV

Outputs & Operations

Control & Alarm Relays Contacts SPDT 2 Amp resistive at 240V AC, >500,000 operations Control SSR Driver Outputs Triac Outputs 0.01 to 1 Amp AC, 20 to 280Vrms, 47 to 63Hz DC Linear Outputs 0 to 20mA, 4 to 20mA into 500Ω max, 0 to 10V, 2 to 10V, 0 to 5V into 500Ω min.

Transmitter Power Supply Output 24VDC (nominal) into 910Ω minimum to power external devices Communications 2 Wire RS485, 1200 to 19200 Baud, Modbus and ASCII protocol (selectable)

Selectable from front panel or via digital input, with bumpless transfer

setpoint

security. Process alarms have adjustable hysteresis.

LED displays, optional choice of colours (Red/Red, Red/Green, Green/Red or Green/Green), plus 5 LED indicators

Configuration Software for Windows 98 or higher. West Part Number: PS1-CON

Scaleable -1999 to 9999, with adjustable decimal point

ranges, low alarms activate for RTD, mA or V ranges

Drive capability >10V DC in 500 minimum

Control outputs have 2% over/under drive applied. Accuracy ±0.25% at 250Ω (degrades linearly to 0.5% for increasing burden to specified limits)

Ref DS-Px100-1209-1-EN

(app

Digital Input Selects between 2 setpoints or Auto/Manual control. Volt free or TTL input

Remote Setpoint Input 0 to 20mA, 4 to 20mA, 0 to 5V, 1 to 5V, 0 to 10V or 2 to 10V. Scaleable -1999 to 9999. Local/Remote

Operating & Environmental

Temperature & RH

Power Supply

Front Panel Protection

Standards

Dimensions 1160+

setpoint selected from front panel

0 to 55°C (-20 to 80°C storage), 20% to 95% RH non-condensing

100 to 240V 50/60Hz 7.5VA (optional 20 to 48V AC 7.5VA/22 to 65V DC 5 watts)

IEC IP66 (Behind panel protection is IP20)

CE, UL & ULC recognised

10mm (approx.)

110mm 48mm

x 45mm

+0.5 –0.0

48mm

1800+

48mm

100mm

10mm

rox)

96mm

1400+

96mm

100mm

Cut out

92mm +0.5

96mm

10mm Approx

92mm +0.5

Ref DS-Px100-1209-1-EN

+ 2 hidden pages