Paradox K641+ Quick Start Manual
K641+-EQ00
Printed in Canada - 02/2014 PARADOX.COM
Quick Start
K641+ Keypad
How To Arm
Arming When Exiting (Regular/Force Arm)
To arm your system when exiting:
Arming When Staying (Stay/Instant Arm)
To arm your system when staying:
LCD (displays system
status and messages)
Arrow keys (use to scroll the
menu options)
AC light (ON = power ON;
OFF = power OFF)
Status light (ON = zones closed
OFF = zones open
Flash = exit delay)
Enter key (saves current
data and exits current menu)
ACC key (press for 2 seconds
to perform an action without
entering an access code)
Clear key (erases current
data entry or reverts
to preceding step)
Step Description
1. Enter your [ACCESS CODE].
• To Regular arm, press the [ARM] key
(arms entire area when all zones are
closed).
• To Force arm, press the [
FORCE] key
(arms entire area without waiting for
all zones to close).
2. Select the desired area or press the [0]
key for all areas.
Step Description
1. Enter your [ACCESS CODE].
•To Stay arm, press the [STAY] key
(arms area’s perimeter only, which
allows you to remain in the
protected area).
• To Instant arm, press the [5] key
(stay arms the area but an alarm will
occur instantly if any zone opens).
2. Select the desired area or press the [0]
key for all areas.
How to Disarm
To disarm your system when entering:
To disarm from within the perimeter:
Panic Keys
To send a silent or audible alarm to your security
company, press and hold one of the key
combinations listed below, for two seconds.
Alarm Memory Display
To view the alarms that occurred during the last
armed period:
Trouble Display
The LCD screen will display all troubles when they
occur. To view and clear troubles:
How to Bypass Zones
When a zone is bypassed, it remains unarmed when
the corresponding area is armed. To bypass zones:
Step Description
1. Enter your [ACCESS CODE].
2. Select the desired partition if necessary.
Step Description
1. Enter your [ACCESS CODE].
2. Press the [DISARM] key.
3. Select the desired partition if necessary.
Panic Alarm Key Combinations
Police Keys [1] & [3]
Medical Keys [4] & [6]
Fire Keys [7] & [9]
Step Description
1. Disarm the system.
2. Press [MEM]. All zones that were
breached during the last armed period
will be displayed. Use the arrow keys to
view the zones.
3. Press [CLEAR] to save and exit.
Step Description
1. Press [TBL].
2. Scroll through the list of troubles using
the arrow keys. Refer to the EVO User
Guide for trouble descriptions and
instructions.
3. Perform the recommended repair
instructions to clear the trouble. If no
instructions are given, contact your
security company.
4. Press [CLEAR] to exit.
Step Description
1. Enter your [ACCESS CODE].
2. Press [BYP].
3. Select the zone you want to bypass by
entering the zone number, e.g., zone
3=003.
4. Press [Enter].
© 2014 Paradox Ltd. All rights reserved.
Specifications may change without prior notice.
For complete patent, trademark, certification,
and warranty information, please visit www.paradox.com.
Loading...