Paradox K32+ Quick Start Manual
K32+-EQ00
Printed in Canada - 05/2014 PARADOX.COM
Quick Start
K32+ Keypad
How To Arm
Arming When Exiting
To arm your system when exiting:
Arming When Staying
To Stay arm your system:
To Sleep arm your system:
O Light (orange†)
On = Disarmed
Off = System armed
†Some models feature a
red LED instead of an
orange one.
AC Light (yellow)
ON = Power on
OFF = Power off
StayD Light (green)
ON = StayD on
= Press once + [
MASTER
CODE
] for Quick Menu
Programming)
Zone Display:
The numbers [1] to [32] correspond to zone
1 to 32 respectively. Open or entry delay
zones are illuminated, and flash in alarm.
Arm (red), Sleep (yel), Stay (grn)
On = Partition armed
Off = Partition disarmed
Flash = Exit Delay
Fast Flash*= Exit Delay
(final 10 sec.)
Fast Flash*= Partition in alarm
* Audible Indicators:
Continuous beep = Alarm
Variable beep = Fire alarm
Intermittent beep= Beginning
of exit delay
Fast beep = Final 10 sec. of
exit delay
[TBL] Trouble display
ON = Trouble(s) occurring
[MEM] Alarm memory display
ON = Alarm(s) occurred
[BYP] Bypass programming
ON = Zone(s) bypassed
Partition 1 Status Partition 2 Status
Step Description
1. Close all zones in the desired
partition.
2. Enter your [ACCESS CODE]** or
press the [ARM] key +[ACCESS
CODE].
Step Description
1. Press the [STAY] key.
2. Enter your [ACCESS CODE]**.
Step Description
1. Press the [SLEEP] key.
2. Enter your [ACCESS CODE]**.
To Dis a r m
[OFF] + [ACCESS CODE]**
** If needed, press button(s) corresponding to desired partition(s). For two partitions, press the
other key after the confirmation beep.
Panic Alarms
To send a silent or audible alarm to your
security company, press and hold one of the
button combinations listed for three
seconds.
Trouble Display
When a trouble condition occurs, the [TBL]
key will illuminate.
Bypass Programming
Bypassed zones remain unarmed when the
partition is armed.
Alarm Memory Display
To view the alarms that occurred during the
last armed period:
Keypad Settings
To mute the keypad, press and hold the
[CLEAR] key for six seconds to enable or
disable Keypad Muting.
To modify the backlight:
Chime Programming
A Chime Enabled zone will advise you every
time it is opened by causing your keypad to
beep.
Panic Alarm Type Button Combinations
Police
Medical
Fire
Press [1] & [3]
Press [4] & [7]
Press [7] & [9]
Step Description
1. Press the [TBL] key. The key will
flash and number(s) corresponding
to the trouble(s) will illuminate.
2. Read the corresponding explanation of the trouble from the trouble
list in the control panel user guide. If
no repair instructions are given, call
your security company for repairs.
3. Press the [CLEAR] key to exit.
Step Description
1. Press the [BYP] key.
2. Enter your [ACCESS CODE]**
3. The corresponding LED of all open
zones will illuminate. Select the
zone(s) you want to bypass by
entering the two-digit zone number
(e.g., zone 3 = 03). The corresponding zone LED will flash.
4. Press the [ENTER] key to save and
exit.
Step Description
1. Disarm the system.
2. Press the [MEM] key.
3. The corresponding zone numbers
that were in alarm the last time the
system was armed will illuminate.
4. Press the [CLEAR] key to exit.
Step Description
1.
Press and hold the [
] key for
three seconds.
2. The [MEM] key will illuminate.
3.
Press the [
] key to set the
desired backlight level.
4. Press [CLEAR] or [ENTER] key to
exit.
Step Description
1.
Press and hold the [
] key for
three seconds.
2. Select the zones you want to Chime
by entering the two-digit zone
number. The corresponding zone
LED will flash. For example, to
chime zone 2, enter [0] then [2].
The keypad will automatically save
once the two-digit zone number is
entered.
3. Press the [ENTER] key to exit.
© 2014 Paradox Ltd. All rights reserved.
Specifications may change without prior notice.
For complete patent, trademark, certification and warranty
information, please visit www.paradox.com.
Loading...