ParaBody 895101 User Manual

Serious Steel

895101

DIP ATTACHMENT

ASSEMBLY INSTRUCTIONS

¯

THANK YOU for purchasing the DIP ATTACHMENT!

¯

PLEASE read these instructions thoroughly and keep them for fi~ture reference.

¯

TOOLS REQUIRED: Ratchet, 3/4" Socket, 3/4" Wrench, Rubber Mallet or
Hammer.

¯

IF you have any problem in the assembly or use of this product,’please contact
the PAR~3ODY Customer Service Department at 1-800-328-9714.

6600101

ParaBody, Incorporated

14150 Sunfish Lake Boulevard

Ramsey, MN 55303

1-800-328-9714

1

03/2~96

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE

OF EOUIPMENT. TO MINIMIZE RISK. PLEASE FOLLOW THESE RULES:

Consult your physician before beginning any excercise progrmn

.

"

1.

2. Inspect equipment daily. Tighten all loose connections and replace warn parts immediately.
Failure to do so may result in serious injury.

3. Do not allow minors or children to play on or around this equipment.

4. Excercise with care to avoid injury.

5. If unsure of proper use of equipment, call your local PamBody distributor or call the ParaBody
customer service depa~huent at 1-$00-325-9714.

~ ***PLEASE IDENTIFY ALL PARTS BEFORE BEGINNING ASSEMBLY***

ITEM

I ..........................6589903 ..............

2 ..........................6590303 ..............

PART # DESCRIPTION

W’LDMT, DIP HANDLE SUPPORT WHT ..........................................

WLDMT, DIP HANDLE WHT ............................................................

" "

OTY

I
I

HARDWARE LIST:

ITEM

I ..........................

2 ..........................6405201 ...........

3 ..........................3102502 .............

4~.£ ......................3102801 ..............

5 ..........................

6 ..........................

7 ..........................3120801 .............. PIN, DETENT .390 DIA X 4-I/2 .........................................................

8. ~.g~.~..~..~. ~..~.~..~...6600301 ..............

1. Attach two 2" ENqD CAPS to DIP HANDLE as shovm on drawing.

2. Attach one 1-1/4 x 5" GRIP to each HANDLE.

3. Insert one 2" END CAP into end of DIP HANDLE SUPPORT.

4. Assemble DIP HANDLE to DIP HANDLE SUPPORT using two 1/2" x 3" bolts, four 1/2"
flat washers and two 1/2" lock nuts as shown on drawing.

PART # DESCRIPTION

3103101 ..............

3102910 .............. BOLT, HHG2 1/2-13 X 3 .....................................................................

6145801 .............. KNOB, 3 PRONG 3/8-16 X 3/4 ...........................................................

***PLEASE SORT HARDWARE BEFORE BEGINNING ASSEMBLY***

QTY

GRIP, I-If4 X 5 CLOSED END ..........................................................2.

2. CAP, END 2 SQ. 10-14 GA .................................................................

WASI-~R, FLAT 1/2 ID ......................................................................

NUT, NYLOCK 1/2-13 .................... .. .........~ .........................~ ........~ ....

GLIDE, 3.75 X 3.75 tYHMWPE QTY1 ............................................... 2.

3.

4.

2. " ..........

2.

1.

1.

5. Attach one GLIDE to inside of each plate as shown in Detail A.

6. Install DIP ATTACHMENT to GUN RACK as shown on drawing. Insert DETENT PIN in
first hole for use on 893 PRO SYSTEM, and second hole for use on 866 STRENGTH

BUILDING SYSTEM.

7. Securly tighten 3 PRONG KNOB in threaded hole as shown on drawing.

66(30101

2

03/22/96