Panasonic WJND300A-1000T-R, WJND300A-2000T-R Specsheet

Network Disk Recorder

WJ-ND300A

WJ-ND300A (120 V AC) WJ-ND300A (220 ~ 240 V AC)

Network Disk Recorder with expandable capacity for digital image data from up to 32 Network Cameras

Key Features

• H.264, MPEG-4 and JPEG multi format

• Up to 32 network cameras can be connected and recorded.

• Various Recording Modes: Manual, Schedule, Event (Pre/Post), Emergency, External Timer

• Various alarm sources include 16x Terminal inputs, 16x Camera alarms, Panasonic Alarm Protocol. Flexible alarm actions include Alarm recording, E-mail notification, Alarm message, Camera positioning, FTP image transfer, Terminal output, Panasonic alarm protocol output, Buzzer and Indicator.

• Panasonic Camera Control: Pan/Tilt, Zoom, Focus, Brightness, Preset Position, Auto mode (depending on camera model).

• Cameras may be assigned to one of the 8 groups to meet application requirements. Flexible Playback Controls: A-B Repeat, Goto Date (Jump to specific

• time/date), Goto Last (Jump to 5 sec. ~ 5 min. before the record end).

• Various Display Modes: Spot, Quad (8 patterns), Spot Sequence, Quad Sequence.

• 8 Quad screens are fully programmable. Any of the 32 cameras can be assigned to any area of the Quad screens.

• Filtered Search: Time & Date, Event Type, Camera number, Text

• Recorded images can be downloaded to a PC.

• Downloadable viewer software allows playback of images downloaded from the Recorder.

• 2 setup modes available, Quick/Advanced at users’ preference.

• 2 built-in network interfaces (10Base-T/100Base-TX) for camera access and client access. Operation by one port is also possible.

• Quick IP Setup for Panasonic i-Pro series network cameras

• Bandwidth control: 32 k / 64 k / 128 k / 256 k / 512 k / 1,024 k / 2 M / 5 M / 10 M (bps) and unlimited

•

Up to 8 clients can monitor images and control WJ-ND300A simultaneously.

• Image transfer to FTP server: Recorded image upon alarm and/or live image periodically

• Performance measurement function for appropriate recording frame rate setup

• Images recorded on the SD memory card in the i-Pro series cameras can be downloaded to the recorder manually. In addition, recordings upon network failure can be transferred automatically when the recorder is in non-recording status.

• Alarm notification by e-mail.

• User/Host authentication, 4 user levels and User-Camera View/Control partitioning set up for sophisticated user management of up to 32 user registrations.

• Multi-recorder, Multi-site system can be made with optional WVASM100 i-Pro Management Software.

• Front panel LCD screen for status display

• HDD capacity is expandable with 4 HDD slots in the main unit and up to 6 WJ-HDE300 optional Extension Units each with 4 HDD slots.

•

Disk partitioning for flexible record management: Normal, Event, Copy

•

HDD Safety Mode to protect HDDs during the installation of WJ-ND300A

• RAID5 capability with optional WJ-NDB301 RAID5 Board

Standard Accessories

• CD-ROM*...................................... 1 pc.

• Installation Guide .......................... 1 pc.

The followings are for installation:

• Power Cord (NTSC model) ........... 1 pc.

• Power Cord (PAL model) ............ 2 pcs.

• Rack Mount Bracket ................... 2 pcs.

Rack Mount Bracket Fixing Screw ... 4 pcs.

•

• Hard Disk Drive Fixing Screw

(w/sleeve and damper) .............. 12 pcs.

* The CD-ROM contains the operating instructions (PDFs) and the setup tools (Panasonic IP setup software, etc.).

Optional Accessories

RAID5 Board

WJ-NDB301

Extension Unit

WJ-HDE300

(4 HDD slots for optional HDD units)

Power Source : 120 V AC, 60 Hz (NTSC)

Power Consumption: approx. 85 W (including 4 HDDs when installed) Dimensions : 420 mm (W) x 88 mm (H) x 350 mm (D)

Weight : 7.2 kg (16 lbs.) (When no HDD exist)

220 ~ 240 V AC, 50 Hz (PAL)

(19-9/16” (W) x 3-7/16” (H) x 13-13/16” (D)) (excluding rubber feet and projections)

Specifications

TV System NTSC PAL Supported

Supported Cameras

Cameras

Supported Image Format Supported Image Resolution Maximum Number of Cameras

Recording

Recording Mode Manual recording, Scheduled recording, Emergency recording,

Pre-alarm Recording Up to 60 minutes. Dedicated HDD for Pre-alarm is required Scheduled Recording Mode Frame Rate/Camera Up to 30 ips (Depending on the camera and Network)

Browser Camera Control GUI REC/Playback Control

Search Mode Display Mode Camera Grouping 8 groups each with 16 characters title Image Download

SD Memory Image data in the SD memory installed in the selected camera Data Download can be transferred to the recorder. Copy Camera Title On the browser, Up to 16 characters Clock Display On the browser. Time: 12H/24H, Date: 3 formats Alarm Control Reset, Suspend Digital Zoom Up to 4 times Text Attachment System Log Time Synchronization Terminal (Master or Slave), NTP (Client) Summer Time User definable (using menu setup) GUI / System Setup Language English, French, Italian, Spanish, German, Russian, Chinese, Japanese Supported OS and Browser Combination

Required PC

Alarm/ Alarm Source Event Event Mode Alarm/Activity/OFF

Alarm Action

Alarm Control Reset, Suspend Event Log 750

Network Network Interface

Maximum Band Width Total 97 Mbps Bandwidth Control (Client Port) Supported Protocol E-mail Upon Alarm or Warning No. of Client at a Time 8 User Registration Up to 32 users User Level 4 Levels (Programmable) Partitioning User - Camera (View only, View & Control, No Access) Security Method

External

Alarm Connector (25pin D-sub)

Interface

Alarm/ Alarm Control Control Emergency recording input*1, Power outage detection input*1, Connector (25pin D-sub)

External Strage RS-232C For servicing purpose only

HDD Type 1x 3.5 inch 250 GB HDD (Factory default),

Maximum Capacity RAID RAID5 supported (with WJ-NDB301 RAID5 Board) Partitioning Normal/Event/Copy

Viewer Playback Control Software Additional Functions Alteration detection, Save as JPEG, Two times zoom, Print

Supported OS, Language

Admin Software

Supported OS, Language

Quick IP Setup

Supported OS, Same as browser GUI, Language of the software will be English

Software Language

Trademarks and registered trademarks

–

Microsoft, and Windows are registered trademarks of Microsoft Corporation in the U.S. and other countries. –Axis is a registered trademark of Axis Communications AB.

–"Super Dynamic", "SDII", "SDIII " and "i-Pro" logos are trademarks or registered trademarks of

Panasonic Corporation.

Important

–

Safety Precaution: carefully read the operating instructions and installation manual before using this product. –Panasonic can not be responsible for network performance and/or other manufacturer products that

reside on the network.

Panasonic i-Pro series Network cameras. (Contact Panasonic for BB series and Axis H.264, MPEG-4 (Specific cameras), JPEG, M-JPEG 1,280 x 960, 960 x 720, 640 x 480, 320 x 240 (Depending on the camera) 32

External timer recording, Event recording

4 programs, 6 time zones/day, Independent setup for each day of the week.

Pan/Tilt, Zoom, Focus, Brightness, Preset position call and program (up to 256), Auto mode REC, PLAY, Rev PLAY, Pause, Stop, FF, REW, Prev Record, Next Record, Prev Image, Next Image, A-B Repeat, Goto Date, Goto Last (5 sec. ~ 5 min.), Text display Search criteria: Time date, Event type, Camera number, Text ON/OFF Spot/Quad (8 patternes)/Spot Sequence/Quad Sequence (Live, Playback)

Recorded data of selected camera and time range (up to 20 min.) can be downloaded to a PC. Viewer software can be downloaded separately.

Recorded data of selected cameras and time date range can be copied to the COPY partition.

Free comment can be attached for each record and reviewed at later time. Up to 200 characters Operator access (100), Network error (1,000), Error (100), Event (750)

Microsoft® Windows® 7 Professional 64 bit/32 bit & Windows Microsoft® Windows Vista® 32 bit SP1 & Windows® Internet Explorer® 7.0, Microsoft® Windows® XP Home/Professional SP3 & Windows The language of OS must be the same as selected GUI language.

JPEG/

CPU: Intel® Pentium® 4 3.0 GHz or faster, RAM: 1 GB or more,

MPEG-4

VRAM: 128 MB or more (Min. 64 MB), Microsoft® DirectX® 9.0c or later

H.264

CPU: Intel® CoreTM i7-920 or faster, RAM: 3 GB or more, VRAM: 128 MB or more (Min. 64 MB), Microsoft® DirectX® 9.0c or later 16x Terminal inputs, 16x Camera alarms, Panasonic Alarm Protocol

Alarm recording, E-mail notification, Alarm message, Camera positioning, FTP image transfer, Terminal output, Panasonic alarm protocol output, Buzzer, Indicator

Camera port: 10Base-T/100Base-TX (RJ-45) Client port: 10Base-T/100Base-TX (RJ-45) Maintenance port: 10Base-T (RJ-45)

32 k / 64 k / 128 k / 256 k / 512 k / 1,024 k / 2 M / 5 M / 10 M (bps) and unlimited TCP/IP, UDP/IP, HTTP, FTP, SMTP, DHCP, DNS, DDNS, NTP, SNMP, RTP

User authentication (ID and Password), Host authentication (IP address), Alteration detection

Alarm Alarm input 1 ~ 16*1, Alarm output 1 ~ 7*2

Alarm output 8 ~ 16*2 Alarm suspension input*1, Alarm reset input

External recording mode switching*1, Power outage recovery completion output

Time adjustment input/output*4, +5 V output*5 Error/ Network error output Warning HDD error output

High-speed serial interface 480 Mbps (theoretical value) for WJ-HDE300 Extension Unit

Up to 4x 2 TB HDDs can be installed. (Contact Panasonic for detail)

56 TB (with 6x WJ-HDE300 Extension Units, 4x 2 TB HDDs installed in each unit)

, Available disk space warning output*2,

, Camera error output*2, Error output*2

Internet Explorer® 8.0 32 bit,

Play, Rev Play, Pause, FF, REW, Prev Record, Next Record, Prev Image, Next Image

Same as browser GUI, Language of the software will be English

cameras)

Internet Explorer® 6.0

TV System NTSC PAL General Safety/EMC Standard Specifications

Power Source 120 V AC, 60 Hz 220 ~ 240 V AC, 50 Hz Power Consumption approx. 85 W Ambient Operating Temperature Ambient Operating Humidity Maximum Operating Altitude Dimensions

Weight 8.3 kg (18.3 lbs.)

*1: Non-voltage make contact, +5 V pull-up 150 Ω *2: Open collector output, 24 V max., –100 mA *3: High (+5 V ~ +12 V, 6.3 mA maximum) *4: 52 kΩ, 5 V pull-up, –100 mA / make contact *5: 200 mA at maximum

UL (6500), FCC (Part15 ClassA), C-UL (E60065), DOC (ICES003 ClassA)

+5 °C ~ +45 °C (41 °F ~ 113 °F) 5 % ~ 90 % (without condensation) 2,000 m (6,500 feet) above sea level 420 mm (W) x 88 mm (H) x 350 mm (D) (16-9/16" (W) x 3-7/16" (H) x 13-3/4" (D)) (excluding rubber feet and projections)

CE (EN60065, EN55022 ClassB, EN55024), GOST (GOST R 51558)

Part Names and Functions

Front View

ARARM

ERROR TIMER REC LINK1 LINK2

SUSPEND

OPERATE

Operate Indicator Alarm Suspension Indicator Alarm Indicator Error Indicator Timer Indicator Recording Indicator Camera Link Indicator

HDD1 HDD2 HDD3 HDD4

PC Link Indicator HDD Access Indicators LCD Arrow Button Escape Button Set Button Maintenance Port

ESC SET

MAINTENANCE

Rear View

External Storage Connector Client PC Port Camera Port Serial Connector (for maintenance purpose) Alarm/Control Connector

EXT STORAGE

10/100BASE-T

CAMERA

SERIAL

SIGNAL GND

ALARM

ALARM/CONTROL

Alarm Connector Signal Ground Terminal Power Switch Power Cord Inlet

Appearance

CAMERA

ALARM/CONTROL

SERIAL

AC IN POWER

ATTENTION

CAUTION

ALARM

SIGNAL GND

270(10-5/8")

350(13-3/4")

40(1-9/16")

(3-7/16")

8.8(3/8")

ARARM

ARARM SUSPEND

OPERATE

480(18-7/8")

465(18-5/16")(Mounting Pitch)

420(16-9/16")

HDD1 HDD2 HDD3 HDD4

ERROR TIMER REC LINK1 LINK2

320(12-5/8")

Unit: mm (inches)

• All TV pictures are simulated.

• Weights and dimensions are approximate.

• Specifications are subject to change without notice.

• These products may be subject to export control regulations.

• All product pictures are NTSC models.

EXT STORAGE

10/100BASE-T

PULL

ESC SET

76(2")

(Mounting Pitch)

PULL

POWER AC IN

MAINTENANCE

Network Disk Recorder

WJ-ND

88(3-7/16")

10.5 (7/16")

DISTRIBUTED BY:

http://panasonic.net/security/

Printed in Japan (2A-001BA)