Panasonic vm-l152 Operation Manual

Camcorder

Operating Instructions

R

Getting Started

Model No.

VM-L152

Basic Operation

Special Features

For Your Information

Please read these instructions carefully before attempting to operate this product.
Please save this manual.

Guía para rápida consulta en español está incluida.

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [e-mail]

LSQT0598A

Things You Should Know

Thank you for choosing Panasonic!

You have purchased one of the most
sophisticated and reliable products on the
market today. Used properly, it will bring
you years of enjoyment. Please take time
to fill in the information to the right.
The serial number is on the tag located on
the rear side of your Camcorder. Be sure
to retain this manual as your convenient
Camcorder information source.

Date of Purchase
Dealer Purchased From
Dealer Address
Dealer Phone No.
Model No.
Serial No.

Unpack your Camcorder

These accessories are provided in order to set up or use your Camcorder.
1 pc. AC Adaptor (PV-A20)

with DC Power Cable
(page 9)

1 pc. Shoulder Strap
(LSFC0012) (page 11)

1 pc. Lens Cap (LSYK0818)
with Lens Cap Strap
(LSGQ0049) (page 11)

1 pc. Audio/Video Cable
(LSJA0390) (pages 20, 21)

1 pc. CR2025 Clock
Battery (VSBW0004)
(installed in Camcorder)
(page 32)

1 pc. Battery Pack
(PV-BP15) (pages 8, 9)

Battery Charging
Confirmation
Marker

Use this marker as a
reminder to yourself when
the battery is fully charged
or in need of a charge.
This marker performs no
function and is for your
reference only.

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [e-mail]

2

Things You Should Know

Safety Precautions

WARNING :TO PREVENT FIRE OR SHOCK HAZARD, DO NOT

EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

Your Compact VHS Camcorder is designed to record and play back in Standard Play (SP)
and Super Long Play (SLP) modes. You can also play a Compact VHS Camcorder
recording on your VHS VCR using the supplied VHS PlayPak.

This Camcorder is equipped with the HQ System to provide excellent video pictures, and
is compatible with standard VHS equipment.
It is recommended that only cassette tapes that have been tested and inspected for use in
VCR machines with the

The above markings are located on the appliance’s bottom cover.

FCC Warning: Any unauthorized changes or modifications to this equipment would

void the user’s authority to operate.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with Part 15 and part 18 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when
operated in a residential environment.
If this equipment does cause interference to radio or television reception, which can be determined by
turning the equipment off and on, use the equipment in another location and/or utilize an electrical
outlet different from that used by the receiver.
If necessary, consult the dealer or an experienced radio/TV technician for help. You may find the
booklet, ‘Something About Interference’ available from FCC local regional offices helpful.

This product may cause interference to radio equipment and should not be installed near maritime
safety communications equipment or other critical navigation or communication equipment operating
between 0.45-30 MHz.

and/or mark be used.

This symbol warns the user that
uninsulated voltage within the unit may
have sufficient magnitude to cause
electric shock. Therefore, it is
dangerous to make any kind of contact
with any inside part of this unit.

This symbol alerts the user that
important literature concerning the
operation and maintenance of this unit
has been included. Therefore, it should
be read carefully in order to avoid any
problems.

Getting Started

3

Important Safeguards

1. Read Instructions – All the safety and

operating instructions should be read before
the unit is operated.

2. Retain Instructions – The safety and
operating instructions should be retained for
future reference.

3. Heed Warnings – All warnings on the unit
and in the operating instructions should be
adhered to.

4. Follow Instructions – All operating and
maintenance instructions should be followed.

5. Cleaning – Unplug this video unit from the
wall outlet before cleaning. Do not use liquid
or aerosol cleaners. Use a dry cloth for
cleaning.

6. Attachments – Do not use attachments not
recommended by the video product
manufacturer as they may be hazardous.

7. Water and Moisture – Do not use this video
unit near water – for example near a bath tub,
wash bowl, kitchen sink, or laundry tub, in a
wet basement, or near a swimming pool, and
the like.

8. Accessories – Do not place this video unit
on an unstable cart, stand, tripod, bracket, or
table. The video unit may fall, causing serious
injury to a child or adult, and serious damage
to the unit. Use only with a cart, stand, tripod,
bracket, or table recommended by the
manufacturer, or sold with the video unit. Any
mounting of the unit should follow the
manufacturer’s instructions and should use a
mounting accessory recommended by the
manufacturer. An appliance and cart
combination should be moved
with care. Quick stops,
excessive force, and uneven
surfaces may cause the
appliance and cart combination
to overturn.

9. Ventilation – Slots and openings in the
cabinet are provided for ventilation and to
ensure reliable operation of the video unit
and to protect it from overheating. These
openings must not be blocked or covered.
Never place the video unit on a bed, sofa,
rug, or other similar surface, or near or over a
radiator or heat register. This video unit
should not be placed in a built-in installation
such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s
instructions have been adhered to.

10. Power Sources – This video unit should be
operated only from the type of power source
indicated on the marking label. If you are not
sure of the type of power supply to your
home, consult your appliance dealer or local
power company. For video units intended to
be operated from battery power, or other
sources, refer to the operating instructions.

11. Grounding or Polarization – This video unit
may be equipped with either a polarized
2-wire AC (Alternating Current) line plug (a
plug having one blade wider than the other)
or 3-wire grounding type plug, a plug having a
third (grounding) pin.

The 2-wire polarized plug will fit into the
power outlet only one way. This is a safety
feature. If you are unable to insert the plug
fully into the outlet, try reversing the plug. If
the plug still fails to fit, contact your electrician
to replace your obsolete outlet.
Do not defeat the safety purpose of the
polarized plug.

The 3-wire grounding type plug will fit into a
grounding type power outlet. This is a safety
feature. If you are unable to insert the plug
into the outlet, contact your electrician to
replace your obsolete outlet. Do not defeat
the safety purpose of the grounding type plug.

12. Power-Cord Protection – Power-supply
cords should be routed so that they are not
likely to be walked on or pinched by items
placed upon or against them. Paying
particular attention to cords of plugs,
convenience receptacles, and the point where
they exit from the unit.

13. Outdoor Antenna Grounding – If an outside
antenna or cable system is connected to the
video unit, be sure the antenna or cable
system is grounded so as to provide some
protection against voltage surges and built-up
static charges. Part 1 of the Canadian
Electrical Code, in USA Section 810 of the
National Electrical Code, provides information
with respect to proper grounding of the mast
and supporting structure, grounding of the
lead-in wire to an antenna discharge unit, size
of grounding conductors, location of antenna
discharge unit, connection to grounding
electrodes, and requirements for the
grounding electrode.

14. Lightning – For added protection of this
video unit receiver during a lightning storm, or
when it is left unattended and unused for long
periods of time, unplug it from the wall outlet
and disconnect the antenna or cable system.
This will prevent damage to the video unit due
to lightning and power-line surges.

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [e-mail]

4

Important Safeguards

15. Power Lines – An outside antenna system

should not be located in the vicinity of overhead
power lines or other electric light or power
circuits, or where it can fall into such power
lines or circuits. When installing an outside
antenna system, extreme care should be taken
to keep from touching such power lines or
circuits as contact with them might be fatal.

16. Overloading – Do not overload wall outlets
and extension cords as this can result in a
risk of fire or electric shock.

17. Objects and Liquids – Never push objects
of any kind into this video unit through
openings as they may touch dangerous
voltage points or short out parts that could
result in a fire or electric shock. Never spill
liquid of any kind onto the video unit.

18. Servicing – Do not attempt to service this
video unit yourself as opening or removing
covers may expose you to dangerous voltage
or other hazards. Refer all servicing to
qualified service personnel.

19. Damage Requiring Service – Unplug this
video unit from the wall outlet and refer
servicing to qualified service personnel under
the following conditions:

a. When the power-supply cord or plug is

damaged.

b. If any liquid has been spilled into, or

objects have fallen onto, the video unit.

c. If the video unit has been exposed to rain

or water.

d. If the video unit does not operate normally

by following the operating instructions.
Adjust only those controls that are covered
by the operating instructions, as an improper
adjustment of other controls may result in
damage and will often require extensive
work by a qualified technician to restore the
video unit to its normal operation.

e. If the video unit has been dropped or the

cabinet has been damaged.

f. When the video unit exhibits a distinct

change in performance – this indicates a
need for service.

20. Replacement Parts – When replacement
parts are required, be sure the service
technician has used replacement parts
specified by the manufacturer or have the
same characteristics as the original part.
Unauthorized substitutions may result in fire,
electric shock or other hazards.

21. Safety Check – Upon completion of any
service or repairs to this video unit, ask the
service technician to perform safety checks
to determine that the video unit is in safe
operating order.

Precautions

Getting Started

USE & LOCATION

• TO AVOID SHOCK HAZARD ... Your Camcorder and power supply should not be exposed to rain or moisture.
Do not connect the power supply or operate your Camcorder if it gets wet. Your Camcorder has been designed for
outdoor use, however it is not designed to sustain direct exposure to water, rain, sleet, snow, sand, dust, or a direct
splashing from a pool or even a cup of coffee. This action could permanently damage the internal parts of your
Camcorder. Do not attempt to disassemble this unit. There are no user serviceable parts inside. Unplug your
Camcorder from the power supply before cleaning.

• DO NOT AIM YOUR CAMCORDER AT THE SUN OR OTHER BRIGHT OBJECTS.

• DO NOT LEAVE THE CAMCORDER WITH THE EVF AIMED DIRECTLY AT THE SUN AS THIS MAY CAUSE

DAMAGE TO THE INTERNAL PARTS OF THE EVF.

• DO NOT EXPOSE YOUR CAMCORDER TO EXTENDED HIGH TEMPERATURE ... Such as, in direct sunlight,
inside a closed car, next to a heater, etc... This action could permanently damage the internal parts of your
Camcorder.

• AVOID SUDDEN CHANGES IN TEMPERATURE ... If the unit is suddenly moved from a cold place to a warm
place, moisture may form on the tape and inside the unit.

• DO NOT LEAVE YOUR CAMCORDER OR THE POWER SUPPLY TURNED ON WHEN NOT IN USE.

• STORAGE OF YOUR CAMCORDER ... Store and handle your Camcorder in a manner that will not subject it to
unnecessary movement (avoid shaking and striking). Your Camcorder contains a sensitive pick-up device which
could be damaged by improper handling or storage.

CARE

• TO CLEAN YOUR CAMCORDER ... Do not use strong or abrasive detergents when cleaning your Camcorder
body.

• TO PROTECT THE LENS ... Do not touch the surface of the lens with your hand. Use a commercial camcorder
lens solution and lens paper when cleaning the lens. Improper cleaning can scratch the lens coating.

• TO PROTECT THE FINISH OF YOUR CAMCORDER ... Before handling your Camcorder, make sure your hands
and face are free from any chemical products, such as suntan lotion, as it may damage the finish.

5

Table of Contents

Getting Started

Things You Should Know .............................................................................2~3

Important Safeguards ...................................................................................4~5

Precautions........................................................................................................5

Quick Operation Guide .....................................................................................7

Supplying Power

Cassette Information ......................................................................................10

Before Using (Remove the Sensor tag, Using the Shoulder and Hand Straps, Lens Cap) ....11

Using MENU Mode ..........................................................................................12

Setting the Clock (Time Zone, Auto Daylight Saving Time) .......................................13~14

Built-in Auto Light (Using the Light, Replacing the Bulb) ............................................... 15

Basic Operation

Camera Recording (Basic, Stand-by, Programmed Recording) .................................... 16~18

Playing Back Recordings

(Basic Playback, Visual Search, Still Picture, Tracking, TV/VCR Playback) ...................19~20

Copying your Tapes (dubbing) ......................................................................21

Special Features

Four-Speed Power Zoom................................................................................22

Backlight ..........................................................................................................22

Focus (Auto/Manual Focus)............................................................................................. 23

High Speed Shutter (Auto/Manual Shutter).................................................................. 24

Auto Fade.........................................................................................................25

Color Digital Fade ...........................................................................................26

Digital Zoom ....................................................................................................27

Digital Electronic Image Stabilization (E.I.S.)...............................................27

MotionSensor ..................................................................................................28

(Battery Charge/Use/Refresh/Care, AC Adaptor, Car Battery Cord) ...... 8~9

For Your Information

Viewfinder/LCD Monitor Indications .......................................................29~30

Operation Notes (Cleaning EVF) .........................................................................31

Notice ...............................................................................................................31

Replacing Clock Battery.................................................................................32

Palmcorder Accessory System .....................................................................33

Palmcorder Accessory Order Form ..............................................................34

Specifications..................................................................................................35

Request for Service Notice ............................................................................35

Before Requesting Service (Video Head Cleaning) ..............................................36

Limited Warranty.............................................................................................37

Customer Services Directory.........................................................................38

Spanish Quick Use Guide/Guía Para Uso Rápido........................................39

Index.................................................................................................................40

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [e-mail]

6

Quick Operation Guide

Charging the Battery Pack

Charge Battery Pack fully before
operation (page 8).

Plug in AC

1

Adaptor.

Insert Battery. CHARGE Lamp

2

flashes, then stays lit when
charging is complete.

Camera Recording

See page 16.

Press LCD-OPEN to unlock the LCD monitor.

1

Swing it fully open and adjust the angle.

Insert Cassette

Attach fully

1

charged Battery

(page 8).

Slide TAPE

2

EJECT to open

door.

Insert cassette

3

(page 10).

Press here to

Protection Film
Note:

• Remove the Protection Film before use.

2
3

4

close door.

Set POWER to CAMERA.

Press RECORD/PAUSE

to start recording.

Press RECORD/PAUSE

again

to pause recording.

Getting Started

Playback using the LCD Monitor

See page 19.

Press LCD-OPEN to unlock the LCD monitor.

1

Swing it fully open and adjust the angle (see above).

Set POWER

2

to VCR.

Press REWIND/SEARCH

3

to rewind tape.

Press PLAY to start

4

playback.

Press STOP to stop

5

playback.

7

Supplying Power

Charging the Battery Pack

Charge Battery Pack fully before use.

3

2

POWER
Lamp

1

1Plug in AC Adaptor.

POWER Lamp lights.

2Insert Battery.

A Align left side of Battery with left edge of

AC Adaptor.

B Press Battery down and slide in direction

of arrow.

The CHARGE Lamp flashes, then stays lit
when charging is complete.

3Remove Battery.

Slide Battery to the left and lift off.

CHARGE
Lamp

A

B

(Top View)

Using the Battery Pack

A fully charged Battery provides a maximum of about 1 hour 10 minutes of continuous use
(LCD monitor off) or about 55 minutes (LCD monitor on). Actual time may vary due to
operating conditions. Using the Built-in Light decreases operating time.

a

Note:

• Charging takes about 1 hour.

• While the DC Power Cable (supplied) is connected
to the AC Adaptor, the Battery cannot be charged.

• After charging 5 times, use Battery Refresh feature
as explained below.

• Battery life gradually decreases after repeated use
and recharging. If operation time becomes very
short even after a sufficient charge, discard Battery
properly (pages 9, 31).

A

Attach Battery.

a Insert top of Battery into top of mounting

surface.

b Press and snap into place.

A

b

B

Battery Refresh

This feature completely discharges
Battery before recharging begins.
Use after every 5 charges for optimum
Battery performance.

REFRESH
Lamp

BATTERY
REFRESH

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [e-mail]

8

B

Remove Battery.

Slide BATTERY RELEASE and remove
Battery.

To use battery refresh, insert Battery on AC
Adaptor (see steps 1~2 above), then press
BATTERY REFRESH.

The REFRESH Lamp lights, then goes out when
discharge is complete. Battery charging will then
start automatically.

BATTERY REFRESH is pressed by mistake,

If
remove Battery from AC Adaptor and reinsert it
for normal charging.

Note:

• Charging takes about 5 hours when Battery
Refresh is used.

• Battery will not operate in extremely high
temperatures.

Supplying Power

Battery Care

Caution:

• Charge only with specified charger.

• Battery can be charged within a temperature range of
10 °C (50 °F) and 35 °C (95 °F).

• Battery is normally warm after charging or just after use.

• Do not use an insufficiently charged or worn-out Battery.

Safety precautions:

• Do not get Battery near, or dispose of in, fire.

• Do not directly connect (short circuit) the positive (+)
and negative (–) terminals.

• Never attempt to disassemble or reassemble Battery.

To avoid Battery damage:

• Do not drop or jar Battery.

• Use Battery with specified units only.

• If Battery is used in extremely high
temperatures, a safety device will
automatically prevent operation.

To prolong Battery life:

• While not in use, remove Battery from
the Camcorder and AC Adaptor, and
store in a cool, dark, dry place.

• Keep Battery terminals clean.

AC Adaptor

1Connect AC Adaptor DC OUT to

Camcorder DC IN with supplied DC

DC Power Cable

Power Cable.

2Plug in AC Adaptor.

POWER Lamp

DC IN
Connector

DC OUT
Connector

CAUTION:

This unit will operate on 110/120/220/240 V AC 50/60 Hz. An AC plug adaptor may be required
for voltages other than 120 V AC. Please contact either a local or foreign electrical parts
distributor for assistance in selecting an alternate AC plug. We recommend using the accessory
power plug adaptor (VJSS0070) in an area which has special AC outlets.

POWER Lamp lights.

Note:

• While the DC Power Cable (supplied) is
connected to the AC Adaptor, the Battery
cannot be charged.

• When not in use, unplug AC Adaptor from
AC outlet. (Adaptor uses 1.2 W of electricity
while plugged in.)

Getting Started

Car Battery Cord (Optional)

Cigarette
Lighter
Socket (12 V)

DC IN
Connector

Car Battery Cord
(optional)

Cigarette
Lighter Plug

1Connect PV-C16 Car Battery Cord

(optional) to

Camcorder DC IN.

2A Start engine first.

B Plug Car Battery Cord into

Cigarette lighter socket.

• If Car Battery cord fuse needs replacing,
use exact current rating (in amps).

Note:

• This cord only works in vehicles equipped
with DC 12 V (negative ground) battery.
Check with your car/truck dealer. Use only
specified car battery cord.

• To avoid blowing the car battery cord fuse,
do step 2 in the proper order.

• Running vehicles must be well ventilated.

• When not in use, disconnect cigarette
lighter plug.

• For personal safety the driver of the vehicle
should not attempt to operate the
camcorder while driving.

9

Cassette Information

Cassette Insertion/Removal

1
3

5

Record/Playback Time

Use tapes with the mark in this unit.

2

4

1Turn Tape Wheel in direction of arrow

until there is no slack.

2Attach Battery (page 8).
3Slide TAPE EJECT to open door.
4Insert cassette as shown.
5Press here to close door.

• To remove the cassette, slide the TAPE
EJECT switch.

Tape Speed
Selector Position

SP

(Standard Play)

SLP

(Super Long Play)

• SLP playback may contain more picture noise.

Erase Protection Tab

Protects tapes from being accidentally
erased.

TC-20

20 minutes

1 hour

Cassette type

TC-30 TC-40

30 minutes

1 hour

30 minutes

40 minutes

2 hours

1To prevent accidental erasing,

break off tab with screwdriver.
(Or, slide tab open.)

2To record again,

12

Slide tab type

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [e-mail]

10

cover hole with adhesive tape.
(Or, slide tab closed.)

Before Using

How to remove the Sensor tag

Hand Strap

Sensor tag

Attaching Shoulder Strap

Remove Battery Pack before completing
the following steps:

1Undo strap ends

from buckles.

2Thread strap ends through Strap

Rings on Camcorder.

Getting Started

1 Open the Hand Strap as illustrated

at left.

2 Remove the Sensor tag.

Then, replace the Hand Strap.

Adjust the Length of the
Shoulder Strap

Pull a loop of strap from buckle, then pull

strap tight to shorten or lengthen.

Hand Strap

3Re-insert the strap

ends into buckles.

min. 25.4 mm (1 inch)

2

3

1

Adjust Hand Strap length to fit your hand as
shown.

Lens Cap

Attaching the Lens Cap
Strap:

Thread the Strap through
the Lens Cap attachment
ring as illustrated at left.

Attaching the Lens Cap Cord to the Hand Strap:

Remove the Hand Strap from the front clasp and thread
the Strap through the loop in the Lens Cap Cord.
Reattach the Hand Strap.

11

Using MENU Mode

Before you begin...

• Connect Camcorder to power source.

• Set POWER to CAMERA or VCR.

1Press MENU for MENU mode.
2Press UP or DOWN to highlight the

3Press DISPLAY to set selection.
4Press MENU to exit.

Note:

• The Menu mode is canceled if UP/DOWN,

1, 2, 3, 4

MENU Mode (CAMERA) Screen

DISPLAY, or MENU are not pressed within
5 minutes when Self Demo mode is off.

• The Menu mode is canceled if UP/DOWN,
DISPLAY, or MENU are not pressed within
30 seconds when Self Demo mode is on.

The CAMERA or VCR MENU screen (see below
left) appears when Menu mode is entered.

desired menu item.

1
2
3
4
5
6

7
8

MENU Mode (VCR) Screen

5
2

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [e-mail]

12

1 PROGRAMMED REC (page 18).

Camcorder starts and stops recording at a
preset time.

2 DISPLAY (page 29).

ON : On-screen Display (OSD) screens are

displayed.

3 SHUTTER (page 24).

Select desired shutter speed.

4 STAND-BY RELEASE (page 17).

ON : Enables quick resumption of recording

from Stand-by mode.

5 CLOCK SET (pages 13, 14).

Select to set clock.

6 LIGHT MODE (page 15).

ON/OFF :Light can be set ON or OFF.
ON/OFF/AUTO: Light can be set ON, OFF , or AUTO.

7 MOTIONSENSOR (page 28).

ON : Enables MotionSensor recording.

8 VIDEO EFFECTS (pages 25~26).

AUTO FADE :BLACK or WHITE
DIGITAL FADE :TYPE

COLOR

7 types
8 colors