Panasonic VLGT001A User Manual

Desktop Stand

Installation Guide

Model No. VL-GT001A

How to install the desktop stand

Important:
L This unit is connected to the power cord and wires, therefore do not change the

installation position frequently. This could cause the power cord and wires to
disconnect.

Overview

Front Side

Power cable
clamp

Bottom

")

16

/

3

157 mm (6

145 mm (511/16")

Wire

Wrap the excess wire as shown.

105°

160 mm (65/16")

PFQX2167ZA DC0405NK0

Installation

Wood screws

Wire

Power cable

Mounting bracket

Desktop stand

Power cable clamp

1 Install the mounting bracket of the monitor station using the wood screws (4 mm × 16 mm,

3

/16" × 5/8") to the holes.

L Remove the mounting bracket and wood screws from the rear of the monitor station

beforehand.

2 Run the wires from the door station through the unit, then to the monitor station.

3 Run the power cable through the unit and the power cable clamp.

4 Mount the monitor station to the mounting bracket, and push down until it is secure.

Technical data about this product

Dimensions: Approximately height 157 mm × width 145 mm × depth 160 mm

Mass (Weight): Approximately 180 g (0.39 lb.)
Installation method: Desktop type
External material: ABS resin

3

/16" × 511/16" × 65/16")

(6