VDR-M50PP
Table of contents
Loading...
Operating Instructions
R
DVD Video Camera
Model No. VDR-M50PP
VDR-M70PP
The illustration shows VDR-M70PP.
Thank you for buying a Panasonic product. Please take the time to become familiar with the operating
instructions and how it is set up. Keep this manual handy for future reference.
Quick Start Guide for Software on page 13.
Be sure to read page 4 before unpacking the provided CD-ROM.
The method for operating the VDR-M50PP is the same as that for VDR-M70PP.
For USA assistance, please call: 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
For Canadian assistance, please call: 1-800-561-5505 or visit us at www.panasonic.ca
VQT0K92-1
H0204HM1034
QR35225
Important Information
For Your Safety
The power switch turns the DVD Video Camera on and off, leaving the date/time feature unaffected. If the camera/recorder
is to be left unattended for a long period of time, turn it off .
WARNING : TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS UNIT TO RAIN OR MOISTURE.
WARNING : TO PREVENT FIRE OR SHOCK HAZARD, USE THE
RECOMMENDED ACCESSORIES ONLY.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, BE
The DVD Video Camera and AC adaptor have the
following caution marks.
CAUTION
RISK OF ELECTRIC
SHOCK
DO NOT OPEN
SURE TO USE THE SPECIFIED AC
ADAPTOR (PV-DAC13).
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT OPEN.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Precautions
WARNING: Many television programs and films are
copyrighted. In certain circumstances, copy-right law
may apply to private in-home videotaping of
copyrighted materials.
The liquid crystal display (LCD) panel is made by
highly precise technology. More than 99.99% of its
picture elements (pixels) are effective, but some (less
than 0.01%) may appear as colored bright dots. This
does not indicate a fault as the LCD panel stretches the
limits of current technology.
Identifications of caution marks
This symbol warns the user that uninsulated
voltage within the unit may have sufficient
magnitude to cause electric shock.
Therefore, it is dangerous to make any kind
of contact with any inside part of this unit.
This symbol alerts the user that important
literature concerning the operation and
maintenance of this unit has been included.
Therefore, it should be read carefully to
avoid any problems.
CLASS 1
LASER PRODUCT
CAUTION
This product contains a laser diode of higher
class than 1. To ensure continued safety, do not
remove any covers or attempt to gain access to
the inside of the product. Refer all servicing to
qualified personnel.
2
FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to tr y to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between th e equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, follow the attached installation instructions and use
only shielded interface cables with ferrite core when connecting to computer or peripheral devices.
Any changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate this equipment.
Declaration of Conformity
Trade Name: Panasonic
Model No.: VDR-M50PP VDR-M70PP/
Responsible party: Matsushita Electric Corporation of America
Support Contact: Panasonic Consumer Electronics Company
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1)This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This class B digital apparatus complies with CANADIAN ICES-003.
This Product has a fluorescent lamp that contains a small amount of mercury. It also contains
lead in some components. Disposal of these materials may be regulated in your community
due to environmental considerations. For disposal or recycling information please contact your
local authorities, or the Electronics Industries Alliance: <http://www.eiae.org
One Panasonic Way, Secaucus, NJ 07094
1-800-211-PANA (7262)
.>
U.S.A./CANADA CONSUMERS: ATTENTION:
A lithium ion/polymer battery that is recyclable powers the product
you have purchased. Please call 1-800-8-BATTERY for information
on how to recycle this battery.
Microsoft®, Windows®, Windows® 98, Windows® 98 Second Edition, Windows® Me, Windows® 2000
Professional, Windows
Corporation.
®
Intel
, Pentium® Processor, and Celeron® Processor are registered trademarks of Intel Corporation.
®
IBM
and PC/AT® are registered trademarks of International Business Machines Corporation.
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
Other company names and product names listed are trademarks or brand names belonging to each individual
company.
SD logo is a trademark.
Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, and 4,819,098, licensed for limited viewing.
This product incorporates copyright protection technology that is protected by method claims of certain
U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
®
XP Home Edition and Windows® XP Professional are registered trademarks of Microsoft
3
Be sure to read the following before opening the CD-ROM package
This Agreement will take effect at the moment you open the package of the storage device (CD-ROM) provided with this product,
if you agree to the terms herein.
If you do not accept the terms of this Agreement, immedi ately return the unopened package of storage medium and enclosed materials
(printed matter, external package, and all others) to your dealer, or return only the package of storage medium to your dealer.
This License Agreement certifies that you were granted license in the past.
License Agreement
Article 1 Grant of License
Matsushita Electric Industrial Co., Ltd., grants you the following rights for the following products (to be referred to as “This Software”
hereafter) that you have obtained with this Agreement:
(a) You may use This Software only on a single piece of equipment. However, if this equipment cannot be used
because of mechanical problem, you may temporarily use This Software on another piece of equipment.
(b) Although This Software contains several components that can be run on c omputer as independent functions, all
components are licensed as a single product: You may not, by any means, use these components on different
computers at the same time.
Article 2 Copyrights
The copyrights of This Software, attached manual, etc. are owned by the following corporations, and are protected by copyright laws
in Japan and USA, as well as by other intellectual property and international properties:
Name of Software Copyright Owners
USB Driver Hitachi, Ltd.
DVD-RAM Driver Matsushita Electric Industrial Co., Ltd.
DVD-MovieAlbumSE Matsushita Electric Industrial Co., Ltd.
MyDVD Sonic Solutions
Article 3 Other Rights and Limitations
(a) You may not copy This Software or any of the printed materials attached, except for duplications to provide b ack-up or storage.
(b) Use of This Software by third parties is prohibited, whether by transferring, renting, leasing, lending, moving, or any other
measures.
(c) You may not decompile or disassemble this Software.
(d) Duplication and/or distribution of any files on this storage medium for commercial use is prohibited.
Article 4 Quality Assurance
Under no circumstances will Matsushita Electric Industrial Co., Ltd. Hitachi, Ltd., or Sonic Solutions accept any responsibility for
any damages you may incur from using or being unable to use This Software (including, but not limited to, loss of business profit,
interruption of business, loss of business information, or other monetary damages).
Article 5 Termination of Agreement
If you fail to comply with the terms of this Agreement, Matsushita Electric Industrial Co., Ltd. Hitachi, Ltd., and Sonic Solutions
reserve the right to terminate the Agreement. In such a case, you will be obliged to discard all copies of This Software and its
components.
Article 6 Prioritized License Agreement
When some software programs are installed, the license agreements will be displayed (to be referred to as online license agreement).
If the online license agreement conflicts with this Agreement, the online license agreement shall have a priority.
4
IMPORTANT SAFEGUARDS
In addition to the careful attention devoted to quality standards in the manufacture of your video product, safety is a major
factor in the design of every instrument. But, safety is your responsibility too.
This page lists important information that will help to assure your enjoyment and proper use of DVD Video Camera and
accessory equipment. Please read it carefully before operating your video product and keep it in a handy place for future
reference.
1 Read and Follow Instructions — All the safety and
INSTALLATION
operating instructions should be read before the video
product is operated. Follow all operating and use
instructions.
2 Retain Instructions — The safety and operating
instructions should be retained for future reference.
3 Heed Warnings — Comply with all warnings on the
video product and in the operating instructions.
4 Power Sources — This video product should be
operated only from the type of power source indicated
on the marking label. If you are not sure of the type of
power supply to your home, consult your video dealer
or local power company. For video products intended
to operate from battery power, or other sources, refer
to the operating instructions.
5 Overloading — Do not overload
wall outlets and extension cords
as this can result in a risk of fire or
electric shock. Overloaded AC
outlets and extension cords are
dangerous, and so are frayed
power cables, damaged or
cracked wire insulation and
broken plugs. They may result in
a shock or fire hazard. Periodically examine the cord
and have it replaced by your service technician if
appearance indicates damage or deteriorated
insulation.
6 Power-Cord Protection — Power-supply cords
should be routed so that they are not likely to be walked
on or pinched by items placed upon or against them,
paying particular attention to cords at plugs,
convenience receptacles, and the point where they
exit from the appliance.
7 Ventilation — Slots and openings in the cabinet are
provided for ventilation to ensure reliable operation of
the video product and to protect it from overheating.
These openings must not be blocked or covered. The
openings should never be blocked by placing the video
product on a bed, sofa, rug, or other similar surface.
This video product should never be placed near or over
a radiator or heat register. This video product should
not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided
or the video product manufacturer's instructions have
been followed.
kawaii koneko
mekoalbum
key to chise
cat book
MOMO
momogatoiredemizubitashi
yohsinarish yohsinarishashin
namemekogaikiteita
nurie
mito
mito
1
mitoniikikata
album
abcdfevcdsz
kabushiki
Zoo Docter
Zoo Docter
tadashiigenkou
mitono
Part 1
Part 2
yakamashii
Why?
tadashiigenkou
auto moter
mother
sasaki akemi
hirayamo akiko
horie youji chikako kimio
igarashi
kuro
kusano
kakurai
oomori matuda
diet
funga funga funga funga
funga funga funga
mame
metsuki
nyanko1midori3okubyo
junkaikun2momo3momo2momo1ebisu2ebisu1key5key4key3key2key1chise5chise4chise3chise2chise
mother
tomodachi
1
123
2
Part2
3
8 Attachments — Do not use attachments unless
recommended by the video product manufacturer as
they may cause hazards.
Caution: Maintain electrical safety. Powerline operated
equipment or accessories connected to this unit should
bear the UL listing mark or CSA certification mark on the
accessory itself and should not have been modified so as
to defeat the safety features. This will help avoid any
potential hazard from electric shock or fire. If in doubt,
contact qualified service personnel.
9 Water and Moisture — Do not use this video product
near water — for example, near a bath tub, wash bowl,
kitchen sink, or laundry tub, in a wet basement, or near
a swimming pool, and the like.
10 Accessories — Do not place this video product on an
unstable cart, stand, tripod, bracket, or table. The
video product may fall, causing serious injury to a child
or adult, and serious damage to the appliance. Use
only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with the
video product. Any mounting of the product should
follow the manufacturer's instructions, and should use
a mounting accessory recommended by the
manufacturer.
5
11 An appliance and cart combination
should be moved with care. Quick
stops, excessive force, and uneven
surfaces may cause the appliance
and cart combination to overturn.
12 Power Lines — An outside antenna system should
not be located in the vicinity of overhead power lines or
other electric light or power circuits, or where it can fall
into such power lines or circuits. When installing an
outside antenna system, extreme care should be
taken to keep from touching or approaching such
power lines or circuits as contact with them might be
fatal. Installing an outdoor antenna can be hazardous
and should be left to a professional antenna installer.
USE
13 Cleaning — Unplug this video product from the wall
outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
14 Object and Liquid Entry — Never push objects of any
kind into this video product through openings as they
may touch dangerous voltage points or short-out parts
that could result in a fire or electric shock. Never spill
liquid of any kind on the video product.
15 Lightning — For added protection for this video
product during a lightning storm, or when it is left
unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the
antenna or cable-system. This will prevent damage to
the video product due to lightning and power-line
surges.
16 Servicing — Do not attempt to service this video
product yourself as opening or removing covers may
expose you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
17 Conditions Requiring Service — Unplug this video
SERVICE
product from the wall outlet and refer servicing to
qualified service personnel under the following
conditions.
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into
the video product.
c. If the video product has been exposed to rain or
water.
d. If the video product does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions. Improper adjustment of other controls
may result in damage and will often require
extensive work by a qualified technician to restore
the video product to its normal operation.
e. If the video product has been dropped or the
cabinet has been damaged.
f. When the video product exhibits a distinct change
in performance — this indicates a need for service.
18 Replacement Parts — When replacement parts are
required, have the service technician verify that the
replacements he uses have the same safety
characteristics as the original parts. Use of
replacements specified by the video product
manufacturer can prevent fire, electric shock or other
hazards.
19 Safety Check — Upon completion of any service or
repairs to this video product, ask the service
technician to perform safety checks recommended by
the manufacturer to determine that the video product
is in safe operating condition.
20 Heat — The product should be situated away from
heat sources such as radiators, heat registers, stoves,
or other products (including amplifiers) that produce
heat.
6
Cautions When Using
Handle the liquid crystal display (LCD) with care:
• The LCD is a very delicate display device: Do not press its surface with force, hit it or prick it with a sharp object.
• If you push the LCD surface, unevenness in display may occur. If unevenness does not disappear, turn the DVD
Video Camera off, wait for a few moments, and then turn it on again.
• Do not place the DVD Video Camera with the open LCD screen down.
• Close the LCD monitor when not using the DVD Video Camera.
Liquid crystal display and viewfinder:
• The LCD screen and viewfinder are the products of highly precise technology. Among the total number of pixels
(approx. 120,000 pixels for LCD monitor and approx. 110,000 pixels for viewfinder), 0.01% or less pixels may
be missing (black dots) or may remain lit as colored dots (red, blue, green). This shows the limitations of the current
technology, and does not indicate a fault that will interfere with recording.
• The LCD screen and viewfinder will be slightly dimmer than usual when the DVD Video Camera is at low
temperature, as in cold areas, or immediately after power is turned on. Normal brightness will be restored when
the temperature inside the DVD Video Camera rises.
Hold the DVD Video Camera correctly:
• Do not hold the DVD Video Camera by the viewfinder or LCD monitor when lifting it: the viewfinder or LCD
monitor could detach and the DVD Video Camera may fall.
Do not subject the DVD Video Camera to impact:
• This DVD Video Camera is a precision machine. Take great care that you do not strike it against a hard object or
let it fall.
• Do not use the DVD Video Camera on a tripod in a place where it is subject to severe vibrations or impact.
No sand or dust!
• Fine sand or dust entering the DVD Video Camera or AC adaptor could cause malfunctions or defects.
No water or oil!
• Water or oil entering the DVD Video Camera or AC adaptor could cause electric shock,
malfunctions or defects.
7
Heat on surface of product:
• The surface of the DVD Video Camera will be slightly warm, but this does not indicate a fault.
Screen on connected TV:
• Never leave the disc navigation screen, still image or camera image displayed on your TV to which the DVD Video
Camera is connected: Doing so could result in displayed image retention or phosphor degradation of TV screen.
Be careful of ambient temperature:
• Using the DVD Video Camera in a place where the temperature is over 140ºF (40°C) or under 32ºF (0°C) will result
in abnormal recording/playback.
• Take care that the temperature of this DVD Video Camera, when connected to a PC does not rise excessively
(reference for usage: approx. 30 minutes at about 86ºF (30ºC).
• Do not leave the DVD Video Camera on a beach or in a closed vehicle where the temperature is very high for a
long time: This could cause malfunctions.
Do not point directly at the sun:
• If direct sunlight strikes the lens or viewfinder, the DVD Video Camera could malfunction or a fire could occur.
• Do not leave the DVD Video Camera with the LCD screen exposed to direct sunlight: This could cause
malfunctions.
Do not use the DVD Video Camera near TV or radio:
• This could cause noise to appear on the TV screen or in radio broadcasts.
Do not use the DVD Video Camera near strong radio waves or magnetism:
• If the DVD Video Camera is used near strong radio waves or magnetism, such as near a radio wave tower or electric
appliances, noise could enter video and audio that are being recorded. During playback of normally recorded video
and audio, noise may also be present in picture and sound.
At worst the DVD Video Camera could malfunction.
Do not expose the DVD Video Camera to soot or steam:
• Thick soot or steam could damage the DVD Video Camera case or cause malfunctions.
Do not use the DVD Video Camera near corrosive gas:
• If the DVD Video Camera is used in a place where there is dense exhaust gas generated by gasoline or diesel engines,
or corrosive gas such as hydrogen sulfide, the external or internal terminals could corrode, disabling normal
operation, or the battery connecting terminals could corrode, so that power will not turn on.
Do not use the DVD Video Camera near ultrasonic humidifier:
• Calcium and other chemicals dissolved in water could scatter in the air, and white particles could adhere to the
optical head of the DVD Video Camera, which could cause it to operate abnormally.
Do not expose the DVD Video Camera to insecticide:
• Insecticide entering the DVD Video Camera could dirty the lens in the laser pickup block, and in such a case the
DVD Video Camera might not operate normally. Turn the DVD Video Camera off and cover it with vinyl sheet,
etc. before using insecticide.
Do not use an optional 8 cm CD lens cleaner:
• Cleaning the lens is not necessary when using this DVD Video Camera in the usual way.
• Using 8 cm CD lens cleaner could cause this DVD Video Camera to malfunction.
Do not touch the lens in laser pickup block.
• If you touch the lens in the laser pickup block directly it may cause malfunctions. Laser pickup block is not a
compensable part. Therefore, pay much attention when operating this camera.
8
Be careful of moisture condensation:
• When you move the DVD Video Camera between places where the difference in temperatures is great - such as
entering a lodge from a ski slope or going out of a cooled room or vehicle - condensation (vapor in air warmed or
cooled to water droplets) could occur on the lens and/or inside the DVD Video Camera. If condensation occurs,
do not open the cover of disc or card insertion block if possible. If condensation occurs on the lens, wipe it off with
a soft, dry cloth. Even if the external surface of DVD Video Camera has dried, condensation may remain inside:
Turn the DVD Video Camera off and leave it in a dry place for at least 1-2 hours before using it again.
Do not use the DVD Video Camera for a long, uninterrupted period of time:
• This DVD Video Camera cannot be used for a long time continuously as a surveillance camera/monitor. If you use
the DVD Video Camera for a long continuous period of time, the temperature of the DVD Video Camera could
exceed its proper limit and the recording/playback operation could be slowed down: In this case, turn it off and wait
for a while before using it again.
• Take care that the temperature of this DVD Video Camera, when connected to a PC, does not rise excessively
[reference for usage: approx. 30 minutes at about 86ºF (30ºC).]
Do not turn the DVD Video Camera off while the ACCESS/PC indicator or CARD ACCESS
indicator is lit or blinking:
• The ACCESS/PC or CARD ACCESS indicator is lit or blinking to
show that data is being written to disc or card, or being read from it.
At this time, do not do any of the following, so as not to damage the
data:
− Remove battery pack
− Disconnect AC adaptor
− Plug or unplug USB cable
− Remove disc or card
− Subject DVD Video Camera to severe vibrations or impact.
− Forcefully open or close the LCD monitor
If you turn the DVD Video Camera off while the ACCESS/PC or CARD ACCESS indicator is lit or blinking, turn
it on again with the disc or card loaded in it: Repair of the disc or card will be executed automatically (see page 152).
CARD
ACCESS
indicator
ACCESS/PC
indicator
Do not wipe the DVD Video Camera case with benzene or thinner:
• The coating of case could peel off or the case surface could deteriorate.
• When using a chemical cleaning cloth, follow the instructions.
Also read the instructions attached with optional accessories:
• For optional accessories, observe the cautions and follow instruction manuals attached.
Keep the Memory Card out of reach of children to prevent swallowing.
9
Cautions When Storing
Do not leave the DVD Video Camera in a place where the temperature is very high for a
long period of time:
• The temperature inside a closed vehicle or trunk can become very high in a hot season. If you leave the DVD Video
Camera in such a place, it could malfunction or the case could be damaged. Do not expose the DVD Video Camera
to direct sunlight or place it near a heater.
Do not store the DVD Video Camera in a place where the humidity is high or in a dusty
place:
• Dust entering the DVD Video Camera could cause malfunctions. If humidity is high, the lens could become moldy,
and the DVD Video Camera could become inoperative. It is recommended that you put the DVD Video Camera
in a box together with a desiccant when storing it in a closet, etc.
Do not store the DVD Video Camera in a place subject to strong magnetism or intense
vibrations:
• This could cause malfunctions.
Detach the battery pack from the DVD Video Camera and store it in a cool place:
• Leaving the battery pack attached or storing it at high temperature could shorten its life.
Suggestions and Restrictions
Make a trial recording:
• Always make a trial recording before doing actual recording to make sure that recording is normal.
Data that have not been stored normally because of a defect in the DVD Video Camera cannot be restored.
It is recommended that you use a DVD-RAM disc from which recorded contents can be deleted for trial recording.
Do not use the DVD Video Camera for professional applications:
• This DVD Video Camera is designed and produced for home-use recording and playback.
The recorded contents cannot be compensated for:
• Panasonic cannot compensate for any damages caused when recording is not made normally or recorded contents
cannot be played back because of a defect in the DVD Video Camera, disc or card. Also, Panasonic cannot be
responsible for your recorded video and audio.
• If you or a third party make a mistake when handling this DVD Video Camer a, disc, card, etc., the recorded contents
may be lost. We cannot be responsible for compensation for damage due to loss of recorded contents.
Copyright:
• Data recorded on the disc or card in this DVD Video Camera using other digital/analog media or devices are
protected by the copyright act and cannot be used without permission of the owner of copyright, except for personal
enjoyment. Be aware that recording is restricted for some demonstrations, performances and exhibitions, even for
personal enjoyment.
10
Read This First
To guide you, we've included the following six chapters.
• The section on “Setups” explains how to set up the
DVD Video Camera, battery pack, and set the date/
time.
• The section on “Basic Techniques” explains the basic
operation of this DVD Video Camera-recording of
movies, still images, external input, and playback of
recorded images.
• The section on “Advanced Techniques” explains
settings on this DVD Video Camera for more
advanced usage.
• The section on “Disc Navigation” explains editing
with Disc Navigation: Refer to this section when
finalizing DVD-R disc and initializing DVD-RAM
disc.
• The section on “Installing Software” explains the
contents of provided CD-ROM and how to install the
included software.
• “Subsidiary Information” includes an introduction to
products sold separately, proper cleaning, and
troubleshooting.
With this DVD Video Camera you can view the picture being recorded or the playback picture on the LCD monitor or
in the viewfinder. Opening or closing the LCD monitor switches the picture to appear on the LCD monitor or in the
viewfinder. The following text describes operation assuming that the viewfinder is used as a monitor device.
We want this manual to be as helpful as possible,
so it includes two easy ways to find the information
you need:
• A quick index for the information you use most often
(this page).
• A detailed table of contents directing you to specific
information quickly (see pages 15-17).
Get to know your DVD Video Camera by using this
manual, and get to know Panasonic. We appreciate
your business.
Quick Index
Available Discs................................................. 28
Recording Movie.............................................. 51
Playing Back.................................................... 59
Connecting to a TV.......................................... 69
Functions Available with Disc Navigation ........ 99
Installing Software ......................................... 130
About This Manual
lDisplays in this manual
Understand that the displays in the manual may not appear exactly as those you will actually see in the viewfinder
or on the LCD screen.
lNotation of cancel button
Press the stop/cancel button to stop your operation midway, or return the menu screen to the preceding one. The
expression “press the g button” will be used in this text.
l1 , 2 and 3 marks beside headings
Some functions of this DVD Video Camera are unavailable with disc or card. Refer to the marks at right above each
function to identify whether the disc or card is compatible with the function. Refer to these marks and identify the
functions and operation to match the disc or card you use.
lIllustrations in this manual
Although the external appearances of VDR-M50PP and VDR-M70PP are different, the method of operating both
models is identical.
The illustrations of VDR-M70PP are used in this text.
11
Introduction
lYou can record even during playback (page 51)
Unlike tape devices, you do not need to search for the recording start position or locate the beginning of a blank
portion.
New recording will not overwrite any previously recorded data.
Recorded scenes
If you stop playback midway and start recording, overwrite will not occur.
lYou can immediately play back desired recorded scenes (page 97)
You do not need to rewind, unlike recorders using tape.
You can select any scene you want and immediately play it back (using Disc Navigation function).
lUse Disc Navigation to create your original movie (page 116)
You can delete unnecessary scenes, move any scenes, etc., and create your original movie work (Play List).
Before editing
After editing
lYou can easily edit scenes (page 77)
Using this DVD Video Camera, you can collect scenes of
your child, for example, on a play list using the Disc
Navigation function and create an original movie: Then
simply play back the play list and dub it on VCR. It is also
easy to make any number of identical tapes.
Until now, you had to
repeatedly press
buttons.
With DVD, you can simply
play back this DVD Video
Camera, and press the
record button on VCR.
12
lCreate original DVDs on PC
(page 141)
You can use a DVD-R disc to create an original DVD,
using the provided software CD-ROM.
The created DVD disc can be played back on a DVD
player, DVD-ROM drive, etc.
Original DVD being
created
Playback of DVD
Quick Start Guide for Software
Features
The following software programs are contained on the provided CD-ROM.
Software Feature
USB Driver Install this driver when using the provided USB Cable to connect this
DVD-RAM Driver Install this driver when using stills and images recorded on a DVD-RAM
DVD-MovieAlbumSE By combining DVD-MovieAlbumSE with VDR-M50PP/VDR-M70PP DVD
MyDVD Use this software when creating a DVD-Video disc from motion images
• Confirming the environment of connecting equipment: see page 130.
Installation Guide (see page 130 for details)
1 Installing USB Driver.
• Be sure you do not connect the USB Cable before installing the USB Driver.
• Insert the provided CD-ROM into the PC and “Setup Menu” will activate: you can install the USB Driver from
the “Setup Menu”.
• After the installation completes, the PC can recognize the DVD Video Camera when the DVD Video Camera
and the PC are connected with the USB cable.
2 Install the software (DVD-RAM Driver, MyDVD and DVD-MovieAlbumSE).
• The software can also be installed from the “Setup Menu”.
DVD Video Camera to a PC.
disc on a PC.
Video Camera, it is possible to use playback, recording and editing on
the DVD-RAM disc. It is also possible to transfer extracted data and title
information etc. to MyDVD.
edited using DVD-MovieAlbumSE.
Note:
If the “Setup Menu” does not appear, double-click the CD-ROM drive icon.
Suggestions for using software (see page 141 for details)
1 Connect this DVD Video Camera to the PC as illustrated below.
• Please ensure a DVD-RAM disc with recorded material is loaded into the DVD Video Camera before
proceeding.
To USB port
2 Edit motion image files using DVD-MovieAlbumSE.
• You can edit motion image files on the DVD-RAM disc.
13
3 Export motion image data to PC using DVD-MovieAlbumSE.
4 MyDVD program will automatically start. (see page 142 for details)
5 Edit motion images and introduce interactive DVD menus using MyDVD Software.
6 Insert a new DVD-R disc into the DVD Video Camera.
• When making an original DVD-R disc using MyDVD software, a message for initialization appears on the
LCD of DVD Video Camera. Select “No” and then follow the instructions on the screen of your PC to make
the original DVD-R disc. Do not perform initialization on DV D Video Camera when using a DVD-R disc with
your computer.
7 Write motion image files to the DVD-R disc with MyDVD.
• Write edited motion images to an 8 cm DVD-R disc in this DVD Video Camera using MyDVD software.
Cautions for use
• When you are making a recording on a new DVD-R disc in your DVD Video Camera, you must initialize the disc
before recording motion images. DVD-RAM disc and Card do not require initialization.
• DVD-R discs are a one time write format; therefore when you write information to the DVD-R disc with
DVD-MovieAlbum or MyDVD, you cannot edit it again.
• When using DVD-MovieAlbum software on Windows
Professional, log on to your PC as Administrator or with a login name equally authorized. If you log on with
a login name other than Administrator, you cannot use DVD-MovieAlbum.
• Set the display resolution to 1024 ~ 768 (16 bits color) when using DVD-MovieAlbum.
Display Settings method as follows:
Select “Start” >> “Settings” (except Windows® XP Home Edition / XP Professional)>> “Control Panel” >> “Display”
and select “Settings” tab on “Display”, and then adjust “Screen Resolution” and “Color quality” to the above.
• MyDVD included in the provided CD-ROM does not contain the slideshows function. Therefore you can not
edit stills on MyDVD.
• Depending on the condition of your PC, it may take a long time to install the software.
®
2000 Professional / XP Home Edition / XP
14
Table of Contents
Important Information ........................................ 2
Be sure to read the following before
opening the CD-ROM package ...................... 4
IMPORTANT SAFEGUARDS ........................... 5
Cautions When Using ........................................ 7
Cautions When Storing.................................... 10
Suggestions and Restrictions .......................... 10
Read This First ................................................ 11
About This Manual........................................... 11
Introduction ...................................................... 12
Quick Start Guide for Software ........................ 13
Table of Contents ............................................ 15
Checking Provided Accessories ......................18
Names of Parts ................................................ 19
Setting Up the Battery Pack............................. 23
Charging Battery Pack ......................................... 23
Try to Record and Play Back Using Disc
(Video and Photo)............................................ 24
Try to Record and Play Back Using Card
(Photo) ............................................................. 26
Discs and Cards .............................................. 28
Available Discs .................................................... 28
Information on DVD-R Disc ................................. 29
Examples of Discs that Cannot be
Used on this DVD Video Camera ..................... 29
Handling Discs..................................................... 30
Available Cards ................................................... 31
Storage Capacity of Disc or Card ....................32
Recordable Time of Movie (Video)......................32
Recordable Stills (Photos) on Disc ...................... 33
Recordable Stills (Photos) on Card .....................33
Size and Quality of Photos .................................. 33
Setups
Setting Up the DVD Video Camera ................. 34
Holding DVD Video Camera ................................ 34
Attaching Shoulder Belt ....................................... 35
Attaching Lens Cap .............................................35
Inserting Battery into Remote
Controller .......................................................... 36
Removing Battery from Remote Controller.......... 36
Viewing Subject Through Viewfinder................... 37
Viewing Image on LCD Monitor Screen .............. 38
Closing LCD Monitor ........................................... 39
Setting Date and Time ......................................... 40
Changing Display Format of Date
and Time........................................................... 41
About the Battery Pack .................................... 42
Attaching Battery Pack to DVD Video Camera.... 42
Removing Battery Pack ....................................... 42
Battery Remaining Level Indicator ....................... 44
Efficient Use of Battery Pack ............................... 44
Using DVD Video Camera
with AC adaptor ................................................ 45
Inserting and Removing Disc........................... 46
Inserting Disc....................................................... 46
Removing Disc .................................................... 48
Inserting and Removing Card.......................... 49
Basic Techniques
Basic Operation of DVD Video Camera .......... 50
Turning DVD Video Camera On or Off................ 50
Recording Movie.............................................. 51
Recording Stills................................................ 52
Compensating for Backlight............................. 53
On-Screen Information .................................... 54
Information Display during Recording ................. 54
Zooming........................................................... 57
Macro Recording ................................................. 58
Using Conversion Lens
(Optional-User Provided) .................................. 58
Playing Back.................................................... 59
Playing Back........................................................ 59
Playback from Start of Disc or Card .................... 60
Search Playback of Movie ................................... 60
Frame Advance/Frame Back/Slow Playback of
Movie................................................................ 60
Skip Playback of Movie ....................................... 61
Playing Back Stills............................................... 61
Jumping to Specified Point (Go To) .................... 62
On-Screen Information Display ....................... 63
Information Display during Playback ................... 63
Manually Focusing Subject.............................. 64
Focusing during Recording ................................. 64
Adjusting Exposure Manually .......................... 66
Using Auto Function ........................................ 67
Using External Microphone ............................. 68
Setting Video Flash (Only for VDR-M70PP).... 68
Viewing on TV Screen ..................................... 69
Connecting to a TV.............................................. 69
Viewing on TV Screen......................................... 70
Playback on DVD Video Recorder/Player ....... 71
To Customers Who Have a DVD Video
Recorder with hard disk................................... 71
Playback on DVD Player ................................. 72
Removing from/and Replacing in Round
DVD Holder................................................... 73
How to Remove Disc........................................... 73
Replacing Disc in Round DVD Holder................. 74
When the Hinge of Round DVD
Holder Comes off ............................................. 74
Disc Cleaning ...................................................... 74
Recording (Dubbing) Images........................... 75
Recording (Dubbing) Images from
Other Video Device .......................................... 75
15
Recording (Dubbing) Images from
Other Video Cameras ....................................... 76
Recording (Dubbing) Images on Other Video
Devices ............................................................. 77
Advanced Techniques
Understanding Flow of Menus ......................... 78
Setting Up Camera Functions.......................... 80
Selecting Shooting Mode to Match the Subject
(Switching Program AE Mode) ......................... 80
Adjusting Color (White Balance).......................... 81
Using the Electronic Image Stabilizer (EIS)......... 83
Reducing Wind Noise during Recording
(Wind Cut)......................................................... 83
Setting to Wide TV Screen Mode
(Wide) (Only for VDR-M70PP).......................... 84
Setting Up Record Functions........................... 86
Switching Movie Quality (VIDEO Mode).............. 86
Switching Quality of Still Image (Quality) ............. 87
Receiving Image from Another Device
(Input Source) ................................................... 88
Switching External Input Recording Method
(PHOTO Input)................................................. 88
Self Timer ............................................................ 89
Setting OSD Output On or Off
(On-Screen Display) ......................................... 90
LCD Setup ....................................................... 91
Setting Brightness of LCD Screen
(Brightness) ...................................................... 91
Setting Color Density of LCD Screen
(Color Level) .................................................... 91
Initial Settings .................................................. 92
Switching Operating Sound On or Off
(Beep)............................................................... 92
Turning DVD Video Camera Off Automatically
(Power Save) .................................................... 92
Turning Record LED On or Off
(Record LED).................................................... 93
Changing Display Language
(Language) ....................................................... 93
Resetting Menu Settings to Defaults
(Reset) .............................................................. 94
Disc Navigation
Using Disc Navigation...................................... 95
Starting or Terminating Disc Navigation .............. 95
Playing Back from Disc Navigation Screen ......... 97
Selecting Multiple Scenes ................................... 98
Selecting Consecutive Scenes Together............. 98
Disc Navigation Menu...................................... 99
Functions Available with Disc Navigation ............ 99
Understanding Flow of Disc
Navigation Menu............................................. 100
Scene............................................................. 101
Deleting Scenes (Delete) ................................... 101
Changing Images for Thumbnails
(Edit - Thumbnail) ........................................... 103
Playing Back by Skipping Scenes
(Edit - Skip) ..................................................... 104
Arranging Order of Scenes (Edit - Move) .......... 104
Directing Scenes Effectively
(Edit - Fade) ................................................... 105
Combining Multiple Scenes
(Edit - Combine) ............................................. 106
Dividing Movies (Edit - Divide) .......................... 107
Copying Stills on DVD-RAM Disc to Card
(Copy)............................................................. 108
Locking Scenes on Card (Lock) ........................ 109
Designating Scenes to be Printed
(DPOF) ........................................................... 110
Selecting Scenes Using Menu Screen
(Select) ........................................................... 111
Displaying Information Using Menu Screen
(Detail)........................................................... 112
Program......................................................... 113
What is “program”?............................................ 113
Switching to Thumbnail Display of Specific Date
(Switch) .......................................................... 113
Playing Back Program (Play) ............................ 114
Changing Title of Program (Title) ...................... 114
Play List ......................................................... 116
What is “Play List”? ........................................... 116
Creating New Play List (Create) ........................ 116
Switching to Display of Each Play List
(Switch) .......................................................... 117
Playing Back a Play List (Play).......................... 117
Adding Scenes to Play List
(Editing Play List) ........................................... 118
Deleting Scenes from Play List
(Editing Play List) ........................................... 119
Adding Scenes Using Submenu for Editing
(Editing Play List) ........................................... 119
Deleting Scenes Using Submenu for Editing
(Editing Play List) .......................................... 120
Selecting Scenes Using Submenu for Editing
(Editing Play List) ........................................... 120
Arranging Order of Scenes (Move) ................... 121
Changing Title of Play List (Title) ...................... 122
Deleting Play List (Delete)................................. 122
Go To............................................................. 123
Top (End) .......................................................... 123
Disc or Card Management............................. 124
Verifying Remaining Free Space on
Disc or Card (Capacity) .................................. 124
Protecting Disc from Writing
(Protect Disc).................................................. 124
Initializing DVD-RAM Disc or Card
(Format Disc. Format card) ............................ 125
Updating Control Information of DVD-RAM Disc
(Update Control Info.) ..................................... 126
Finalizing DVD-R Disc (Finalize Disc) ............... 127
Other Functions (Others)............................... 128
Displaying Movies or Stills Independently
(Category) ...................................................... 128
Playing Back Scenes Repeatedly
(Repeat Play) ................................................. 128
Slide Show (Continuous Playback of Stills)....... 129
16
Installing Software
Compatible PC for use with DVD Video Camera:
VDR-M50PP/VDR-M70PP............................. 130
Operations will not be guaranteed under the
following conditions ..................................... 130
Contents on Provided CD-ROM .................... 131
Installing USB Driver ......................................... 133
Installing DVD-RAM Driver ................................ 135
Installing DVD-MovieAlbumSE .......................... 138
Installing MyDVD ............................................... 140
Creating DVD Video on PC from DVD-RAM
Disc Recorded on DVD Video Camera ....... 141
Uninstalling Software ..................................... 143
Uninstalling USB Driver ..................................... 143
Deleting Other Applications ............................... 144
Supplementary Information
Introduction to Optional Accessories .............145
Video Camera Accessories ............................... 145
Information on Round DVD Holder.................... 146
Cleaning......................................................... 147
Terminology ................................................... 148
Before Requesting Service ............................ 150
Error Messages ............................................. 152
Troubleshooting ............................................. 158
System Reset ................................................ 164
Major Specifications....................................... 165
Request for Service Notice (USA Only)......... 168
Limited Warranty (For USA Customers) ........ 169
Customer Services Directory ......................... 170
Warranty (For Canadian Customers)............. 171
17
Checking Provided Accessories
Make sure that you found all the following accessories in the package:
Battery Pack (CGA-DU14A):
Portable power supply for this DVD Video
Camera. Charge it before use.
Powe r Ca bl e:
Connect between household AC outlet and
AC adaptor.
AV/S Input/Output Cable: (EW12522)
Used when playing back the DVD Video
Camera picture to a TV screen, or input or
output video from/to another video device.
8 cm DVD-RAM Disc (in Round DVD
Holder):
To record video (movie) on this DVD Video
Camera.
AC Adaptor/Charger (PV-DAC13):
Used to power the DVD Video Camera from
AC outlet, or charge batter y pack.
Remote Controller (VEQ3993):
Use to control the DVD Video Camera from a
distance.
Shoulder Belt:
Attach to the DVD Video Camera to hang it
from shoulder.
Software CD-ROM:
Use this CD-ROM on PC when connecting
the DVD Video Camera to PC.
DC Cord:
When powering the DVD Video Camera from
household AC outlet, use this cord to connect
the DVD Video Camera and AC adaptor.
Button Type Battery (CR2025):
To power the remote controller.
WARNING: Keep
this battery away
from children. If
swallowed, consult
a physician
immediately for
emergency
treatment.
Lens Cap and Lens Cap String:
Attach the lens cap when not recording, to
protect the lens.
USB Cable: (EW12531)
18
Names of Parts
123 4
10
11
(Inside the cover)
78
659
N
DISC
NAVIGATIO
SELECT
MENU
u
y
t
i
A/V
MIC
12
13
BATTERY EJECT
(Bottom)
1 Infrared receiver (P. 37)
When the remote controller is used to operate the
DVD Video Camera, this receiver will receive the
infrared signal.
2 Lens cap string attachment hole (P. 35)
3 Recording indicator (P. 93)
The red indicator will light during recording.
4 Internal stereo microphone (P. 51)
5 Lock cover and Lock button (P. 34)
6 Optical 10x zoom lens (VDR-M70PP)
Optical 18× zoom lens (VDR-M50PP)
(P. 57)
7 Lens hood (P. 58)
Always remove this lens hood when using optionaluser provided tele-conversion or wide-conversion
lens.
8 Zoom lever (P. 57)
Push the lever to the T side for telephoto, or to the W
side for wide-angle.
9 Hot shoe (P. 68)
Only for VDR-M70PP:
Attach the optional video flash here.
10 AV input/output jack (P. 69, 75)
11 External microphone jack (P. 68)
12 2.5" type Liquid Crystal Display (LCD)
(inside) (P. 7, 38)
13 BATTERY EJECT switch (P. 42)
The BATTERY EJECT switch is located on the
bottom of this DVD Video Camera: Slide it when
removing the battery pack.
Although the external appearances of VDR-M50PP
and VDR-M70PP are different, the method of
operating both models is identical. VDR-M70PP
illustrations are used in this manual.
19
14 15 16 1917
ACCESS/PC
DISC EJECT
18
S
S
E
C
C
A
D
R
A
C
20 21 23 26
14 Viewfinder (P. 7, 37)
15 Diopter control (P. 37)
To adjust the focus of image appearing in the
viewfinder (Pull out the viewfinder.).
16 ACCESS/PC indicator (P. 9, 51, 52)
Will blink or light when the disc in DVD Video
Camera is accessed (write or read is executed) or the
DVD Video Camera is connected to PC.
17 DISC EJECT lever (P. 46)
Press and release this lever to open the disc guide.
18 CARD ACCESS indicator (P. 9, 52)
19 Card insertion block (P. 49)
20 Battery attachment platform (P. 42)
21 Record (REC) button (P. 51, 52)
2522 24 27
22 Power switch (P. 50, 51, 52)
23 Shoulder belt attachments portion (P. 35)
24 LOCK switch (P. 25, 51)
In mode, set the LOCK switch to (to the left)
to lock the power switch so that it does not
accidentally move to .
From mode, you cannot move the LOCK s witch
to the left to lock the power switch.
25 Speaker (P. 59)
26 Grip Belt (Free Style Grip Belt) (P. 34)
27 Disc insertion block (P. 46)
20
28 29 30
AUTO FOCUS
DISPLAY
VOL
32 33
EXPOSURE
31
BACK
LIGHT
AUTO FOCUS
DISPLAY
VOL
EXPOSURE
RESET
BACK
LIGHT
DISC
NAVIGATION
SELECT
MENU
DISC
NAVIGATION
SELECT
MENU
37
38
39
40
34
28 AUTO button (P. 67)
To switch the DVD Video Camera to full automatic.
29 FOCUS button (P. 64)
To switch between manual focus and auto-focus.
30 EXPOSURE button (P. 66)
Press this button to adjust the exposure.
31 BACK LIGHT (backlight compensation)
button (P. 53)
Press this button when subject is being illuminated
from behind.
32 DISPLAY (Screen display) button (P. 63)
Press this button to display the details of image being
played back or camera setting status, or to switch the
display off.
33 Volume control buttons (VOL)/ S R buttons
(P. 59, 64, 66)
To adjust the volume of sound from speaker, etc.
34 RESET button (P. 164)
To reset all settings to defaults (status when the DVD
Video Camera was shipped from the factory).
35
36
35 USB port (To PC)
36 Joystick (P. 40, 59, 79)
Move the joystick to select a scene or menu item, and
then press the center (A) to play back the scene,
pause it, or select an option from the menu.
37 DISC NAVIGATION button (P. 95)
38 SELECT button (P. 98, 111)
39 MENU button (P. 40, 79, 101)
Press this button to display the menu for setting
camera functions and Disc Navigation.
The camera menu will appear even if disc is not
loaded.
40 Stop/cancel button (P. 11, 59, 79)
To end playback or cancel menu setting .
21
41
42
43
47
48
44
45
46
41 REC button (P. 51, 52)
42 DIGITAL ZOOM button (P. 57)
43 Reverse skip button (P. 61)
44 Reverse search button (P. 60)
45 DISC NAVIGATION button (P. 95)
46 MENU button (P. 40, 79, 101)
49
50
51
52
53
54
55
47 ZOOM T button (P. 57)
48 ZOOM W button (P. 57)
49 Forward Search button (P. 60)
50 Play/pause button (P. 59)
51 Forward skip button (P. 61)
52 DISPLAY button (P. 63)
53 Stop button (P. 11, 59, 79)
54 DELETE button (P. 101)
55 SELECT button (P. 98, 111)
* The buttons on remote controller will function the same as those on DVD Video Camera.
22
Setting Up the Battery Pack
The CGA-DU14A battery pack provided with this DVD Video Camera has not been charged at purchase
time: Charge it before using the DVD Video Camera.
Note:
• Be sure to use the specified battery pack CGA-DU14A (provided) for the DVD Video Camera: using other batteries could
cause the DVD Video Camera to malfunction, or result in fire.
• Be sure to use the specified AC adaptor to charge the battery pack: using other chargers could cause electric shock
or fire.
• Charge the battery pack at temperatures of 50 - 86°F (10-30°C).
Charging Battery Pack
Use the provided AC adaptor to charge the battery pack.
3 Attach the battery pack to AC adaptor.
1 Connect the power cable to AC adaptor.
2 Plug the power cable into AC outlet.
The CHARGE indicator on AC adaptor will light.
POWER and
CHARGE indicators
POWER
indicator
CHARGE indicator
Note:
When charging a battery pack, unplug the DC cord from the
DC output jack on AC adaptor.
Battery pack
Power cable
AC adaptor
lBattery pack charge status
You can find out the charge status of the battery pack by checking the CHARGE indicator on the AC adaptor:
Charge status CHARGE indicator
During charge Lit
Charge complete Goes out
Note:
• If the CHARGE indicator does not light when the AC
adaptor is plugged into household AC outlet, unplug it
from household AC outlet, wait a few moments, and then
plug it into household AC outlet again. If the CHARGE
indicator still does not light, the AC adaptor may be faulty.
Unplug it from household AC outlet and consult your
dealer.
• See “Troubleshooting” on page 158, when the CHARGE
indicator blinks.
23
12
Try to Record and Play Back Using Disc (Video and Photo)
Before You Begin
You can record both videos and photos on DVD-RAM disc; only videos on DVD-R disc.
• It is recommended that you use a DVD-RAM disc for trial recording, since
you can delete the recorded contents (See page 28).
1 Connect power supply (P. 45).
Power cable
DC cord
Connect them in sequence of the digits.
AC adaptor
2 Insert a disc (P. 46).
1. Press down the DISC EJECT lever once and
release it.
3. Insert the disc, in Round DVD Holder, into the disc
guide until it stops.
DISC EJECT
2. Gently open the cover until it stops.
24
Disc cover
PUSH CLOSE
portion
3 Start recording (P. 51).
1. Open the LCD monitor (See page 38).
2. While holding the switch at the center of power
switch, set the switch to “ ” or “ ”.
Note
:
When using an unformatted disc, format (initialize) it on this DVD Video Camera.
If unformatted disc is inserted into this DVD Video Camera, a message will appear: Format the disc following the
instructions on screen (P. 47, 125). Initializing the disc will erase all the recorded contents: make sure the contents
on disc are not valuable before initializing the disc.
3. Set the LOCK switch to (to the left) to prevent
accidental switching of recording mode.*
* Only in mode.
4. Press the REC button.
Recording will start.
Pressing the REC button again will stop recording.
REC button
4 View the playback of recorded content on LCD monitor.
1. Open the LCD monitor (See page 38). 2. After recording is finished, press the A button.
The recorded scene will be played back.
3. Press the g button to stop playback.
25
Try to Record and Play Back Using Card (Photo)
Only photos can be recorded on card.
1 Connect power supply (P. 45).
Power c able
3
DC cord
Connect them in sequence of the digits.
2 Insert a card (P. 49).
1. Open the cover of card insertion slot with power
turned off.
2. Put in a card.
AC adaptor
3. Insert the card all the way until it locks.
26
3 Start recording (P. 52).
1. Open the LCD monitor (See page 38).
2. Set the LOCK switch to (to the right).
3. While holding the switch at the center of power
switch, set the switch to “ ”.
4. Press the REC button.
Pressing REC once will record one photo.
REC button
4 View the playback of recorded content on LCD monitor.
1. Open the LCD monitor (P. 38). 2.Press the A button in recording pause status: the
recorded scene will be played back.
3. Press the g button to stop playback.
27
Discs and Cards
The following table lists the storage media (discs and cards) that can be used on this DVD Video Camera
and the functions which are available with them:
Media
Function DVD-RAM disc DVD-R disc
Recording movie ll
Recording still l
Deleting recorded image l
Editing on this DVD
Video Camera
Playback on DVD player
Playback on DVD video
recorder
l
l
*1
-
*3
-
-
--
*2
l
*2
l
SD Memory Card/
MultiMediaCard
-
l
l
-
*4
-
l: Functions available;
*1:
Can be played back on DVD players with the
*2:
Must be finalized (see “Terminology”, P. 148) on this DVD Video Camera before DVD-R disc can be played back on
DVD player or DVD-RAM recorder (See page 127). May not be playable on some DVD players.
*3:
Compatible with DVD video recorders that conform to 8 cm DVD-RAM.
*4:
Some DVD video recorders incorporate a device that can play back SD memory card and multimedia card.
mark.
-
: Not available
Available Discs
Usable discs and logos Shape
DVD-RAM Ver. 2.1 (8 cm)
In Round DVD
DVD-R
[for General Ver. 2.0 (8 cm)]
This DVD Video Camera uses 8 cm DVD-RAM discs
and 8 cm DVD-R discs for camcorder use.
Discs removed from Round DVD Holder cannot be used
on this DVD Video Camera: Use them only in the holder.
Do not insert a bare disc removed from the holder into the
DVD Video Camera: It will not be removable.
Note:
• It is recommended that you use Panasonic discs, since
their compatibility with this DVD Video Camera has been
confirmed. Using a disc other than those made by
Panasonic may not allow the DVD Video Camera to
deliver optimum performance.
• It is necessary to initialize an unformatted DVD-RAM
disc. When an unformatted disc is inserted into the DVD
Video Camera, a message will appear: Initialize the disc
following the instructions on screen (P. 125).
• The Round DVD Holder cannot be used on DVD Video
Cameras that use square type adapters.
• Image data edited on PC and certain types of image data
may not be visible on this DVD Video Camera.
• The image data recorded on another device may not be
playable on this DVD Video Camera.
Holder
28
Information on DVD-R Disc
You cannot record a still on DVD-R disc, or delete any
recorded images or data.
For optimum recording on DVD-R disc, this DVD Video
Camera writes control data to the disc in order to
automatically make adjustments when it is inserted and
ejected accompanying recording. If the disc has no area
to be written for adjustment, recording may not be
possible. To prevent this, do not insert or eject a DVD-R
disc which has been recorded on more than 50 times. The
DVD Video Camera will not perform “write adjustment”
when the DVD Video Camera is turned on again, from
off, for recording with the disc in it, or when no recording
is made, even if the disc is removed and then reinserted.
lFinalizing DVD-R disc
Before using the 8 cm DVD-R disc on a DVD player or
DVD video recorder that is compatible with 8 cm DVDR disc, the disc must be finalized on this DVD Video
Camera. For the finalizing procedure of 8 cm DVD-R
disc, refer to “Finalizing DVD-R Disc (Finalize Disc)”
(P. 127).
Note:
• When using an unformatted DVD-R disc, it is necessary
to format it on this DVD Video Camera (See page 47).
• Do not insert a DVD-R disc recorded on this DVD Video
Camera but not finalized, into a recordable device, such
as a DVD video recorder: The recorded data may be
damaged.
• DVD-R discs edited and finalized on PC or those finalized
on another DVD video recorder may not be playable on
this DVD Video Camera, depending on the editing
software used or recording status of DVD-R disc.
• Refer to the remaining time indicated on the LCD of DVD
Video Camera to check the capacity of DVD-R disc.
Examples of Discs that Cannot be Used on this DVD Video Camera
• DVD-RAM (2.6 GB) Ver. 1.0 • DVD-ROM • MO
• DVD-R (3.9 GB) Ver. 1.0 • DVD-Video • MD
• DVD-R (4.7 GB) for Authoring Ver. 2.0 • CD-R • iD
• DVD-RW • CD-RW • Floppy disk
• DVD+RW • CD • Discs other than those with diameter of 8 cm
• DVD+R • LD • CD-ROM
Note:
Discs recorded on PC or DVD video recorder may not be playable on this DVD Video Camera: If so, message “This disc
cannot be used. ” will appear. Also, blue thumbnails will appear (Fig. 1* on page 30), or nor mal playback will not be possible.
29
Handling Discs
lUsing discs
DVD-RAM and DVD-R discs are very delicate
recording media. Carefully read the following cautions
and observe them:
• When using a disc in this DVD Video Camera, be sure
to keep it in Round DVD Holder.
• Always use a brand new disc when recording
important material.
• Be sure not to touch the exposed
disc portion, and be careful that
no dirt adheres to it.
• If there is dust, scratch, dirt on
disc or if it is warped, the
following phenomena may occur:
− Block noise in playback image
− Momentary stop of playback
image
− Sound interrupted during
playback, or abnormal sound
− Blue thumbnail display*
(Fig. 1)
− Disc cannot correctly be
recognized
− Delay between video and
audio
Even if disc is normal, the
above phenomena may
occasionally occur. While the ACCESS/PC indicator
is lit, do not subject disc to vibrations or impact, and
avoid using DVD Video Camera at extremely high or
low temperatures, or in an environment where
condensation is likely to occur.
• When recording images, the
DVD Video Camera may
avoid the portions of disc
where recording is not
possible, due to dust,
scratches, etc. [It will pause
m at such a portion and
automatically restart
recording (n).]
This will cause recording to
be interrupted for several seconds to several minutes,
and multiple thumbnails will be created by one
recording session as shown above. In this case, the
recordable time on disc will decrease.
• Be careful when removing the disc since the metal of
removal slot of DVD Video Camera, and disc itself,
may be hot.
Do not touch
Block noise
001/ 006All Programs
PLAY
(Fig. 1)
*
PLAY
(Recording one scene
may produce multiple
thumbnails.)
RAM
001 / 002All Programs
RAM
lStoring discs
• When storing disc, insert it in Round DVD Holder into
plastic case.
• Be careful that no condensation occurs on disc.
• Do not place disc in the following places:
− Direct sunlight for a long time
− Where humidity is high or in dusty place
− While there is heat from a heater, etc.
Note:
• See page 74 when cleaning the removed disc.
• See page 73 for how to handle disc removed from Round
DVD Holder.
• See page 74 for how to set the disc removed from
Round DVD Holder or another disc correctly into Round
DVD Holder.
30
Loading...