Panasonic VDR-D220EP User Manual

LSQT1156_EN.book 1 ページ 2006年12月7日 木曜日 午後7時53分
Operating Instructions
Instrukcja obsługi
DVD Video Camera
Model no. VDR-D310EP
VDR-D220EP
Before use, please read these instructions completely. Przed pierwszym włączeniem kamery prosimy o dokładne przeczytanie instrukcji obsługi.
LSQT1156 A
LSQT1156_EN.book 2 ページ 2006年12月7日 木曜日 午後7時53分
Information for Your Safety
The socket outlet shall be installed near the
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS TO
RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
USE ONLY THE RECOMMENDED
ACCESSORIES.
DO NOT REMOVE THE COVER (OR
BACK); THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT
IN A BOOKCASE, BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.
DO NOT OBSTRUCT THE UNIT’S
VENTILATION OPENINGS WITH NEWSPAPERS, TABLECLOTHS, CURTAINS, AND SIMILAR ITEMS.
DO NOT PLACE SOURCES OF NAKED
FLAMES, SUCH AS LIGHTED CANDLES, ON THE UNIT.
DISPOSE OF BATTERIES IN AN
ENVIRONMENTALLY FRIENDLY MANNER.
equipment and easily accessible. The mains plug of the power supply cord shall remain readily operable. To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from AC receptacle.
Product Identification Marking is located on the bottom of unit.
EMC Electric and magnetic
compatibility
This symbol (CE) is located on the rating plate.
Use only the recommended accessories.
Do not use any other AV/S cables and USB
cables (VDR-D310) except the supplied one.
When you use the cable which are sold
separately, please make sure to use the one whose length is less than 3 meters.
CLASS 1 LASER PRODUCT IEC 60825-1:2001
CAUTION This product contains a laser diode of higher class than 1. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product. Refer all servicing to qualified personnel.
2
LSQT1156
LSQT1156_EN.book 3 ページ 2006年12月7日 木曜日 午後7時53分
Information on Disposal for Users of Waste Electrical & Electronic Equipment (private households)
This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery
and recycling, please take these products to designated collection points, where they will be accepted on a free of charge basis. Alternatively, in some countries you may be able to return your products to your local retailer upon the purchase of an equivalent new product. Disposing of this product correctly will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling. Please contact your local authority for further details of your nearest designated collection point. Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
ENGLISH
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.
Information on Disposal in other Countries outside the European Union
This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.
3
LSQT1156
LSQT1156_EN.book 4 ページ 2006年12月7日 木曜日 午後7時53分
Indemnity concerning recording
content
The manufacturer shall in no event be liable for the loss of recordings due to malfunction or defect of this unit, its accessories or recordable media.
Carefully observe copyright laws
Recording of pre-recorded tapes or discs or other published or broadcast material for purposes other than your own private use may infringe copyright laws. Even for the purpose of private use, recording of certain material may be restricted.
SDHC Logo is a trademark.miniSD Logo is a trademark.The Movie Camera uses copyright-protected
technologies and is protected by the patented technologies and intellectual properties of Japan and the U.S. To use these copyright­protected technologies, authorization of the Macrovision Company is required. It is prohibited to disassemble or modify the Movie Camera.
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
LEICA is a registered trademark of Leica
microsystems IR GmbH and DICOMAR is a registered trademark of Leica Camera AG.
Other names of systems and products
mentioned in these instructions are usually the registered trademarks or trademarks of the manufacturers who developed the system or product concerned.
Depending on the model, some functions are
not available.
Features may vary, so please read carefully.
These operating instructions are designed for use with models VDR-D310 and VDR-D220. Pictures may be slightly different from the original. The illustrations used in these operating
instructions show model VDR-D310, however, parts of the explanation refer to different models.
4
LSQT1156
LSQT1156_EN.book 5 ページ 2006年12月7日 木曜日 午後7時53分
Contents
Information for Your Safety................... 2
Before using
Features ..................................................7
Accessories............................................9
Parts identification and handling .......10
Using the LCD monitor .............................13
Using the viewfinder.................................14
Using the remote control (VDR-D310) .....14
Discs and cards....................................16
Discs that can be used on this unit...........16
Cards that you can use with this unit........20
Disc and card handling.............................21
Setup
Power supply........................................22
Charging the battery.................................22
Connecting to the AC outlet .....................26
Turning the unit on/off...............................26
Inserting/removing a disc....................27
Inserting/removing an SD card........... 29
Selecting a mode..................................30
How to use the joystick.......................30
Switching the language.......................34
Using the menu screen........................34
Setting date and time...........................36
Adjusting LCD monitor/viewfinder..... 37
Recording
Tele macro function (VDR-D310) ............. 50
Colour night view function........................ 51
Self-timer recording.................................. 51
Recording guideline function....................52
Wide mode............................................... 52
Image stabilizer function .......................... 52
Wind noise reduction function.................. 53
Manual recording functions................ 53
Scene mode............................................. 53
Manual focus adjustment ......................... 54
White balance.......................................... 55
Manual shutter speed/
aperture adjustment ................................. 56
Playback
Motion picture playback......................58
Still picture playback
(JPEG still pictures).............................62
Editing
Editing scenes......................................64
Deleting scenes ....................................... 64
Dividing a scene....................................... 65
Combining scenes ...................................65
Using playlists......................................66
What is a playlist?.................................... 66
Creating a new playlist............................. 66
Playing back a playlist.............................. 67
Editing a playlist....................................... 67
Editing still pictures.............................71
Deleting still pictures................................ 71
Locking still pictures ................................. 72
DPOF setting ........................................... 72
Before recording ..................................38
Recording motion pictures .................40
Recording modes and recordable time
available for the motion picture ................41
Recording still pictures
(JPEG still pictures).............................43
Number of pixels and picture quality
for still picture recording ...........................46
Various recording functions ...............47
Zoom in/out function.................................47
Recording yourself ...................................48
Backlight compensation function..............48
Fade in/fade out function..........................49
Soft skin mode..........................................50
Disc and card management
Disc management ................................74
Finalizing a disc .......................................74
Un-finalizing a DVD-RW .......................... 75
Protecting a disc ...................................... 75
Formatting discs.......................................75
Displaying disc information ...................... 76
Card management................................76
Formatting an SD card............................. 76
5
LSQT1156
LSQT1156_EN.book 6 ページ 2006年12月7日 木曜日 午後7時53分
With other products
With a TV...............................................78
Playback on TV........................................78
With a DVD recorder/player.................79
Playback on DVD recorder, DVD player,
computer etc.............................................79
Dubbing recordings
onto a DVD recorder’s hard disk ..............80
With a VCR............................................81
Dubbing images
onto other video devices ..........................81
With a printer (PictBridge)...................81
Others
Menus....................................................84
Menu list ...................................................84
Other menus.............................................85
Indications ............................................86
Indications................................................86
Messages .................................................89
Functions that cannot be used
simultaneously..........................................91
Frequently asked questions................92
Troubleshooting...................................93
Cautions for use...................................97
Explanation of terms..........................100
Specifications.....................................102
Number of recordable pictures
on an SD card ........................................104
6
LSQT1156
LSQT1156_EN.book 7 ページ 2006年12月7日 木曜日 午後7時53分
Before using
Features
Easy recording! (l 40)
No need to search for the recording start position. The new recording will not overwrite any previously recorded scene.
Easy playback! (l 58)
Recorded scenes are displayed as thumbnails. You can easily search for the scenes you want to watch.
Before using
Editing scenes! (l 64, 66)
You can create an original video (playlist) by collecting your favourite scenes together and then easily dub this video to a VCR or a DVD recorder hard disk.
7
LSQT1156
LSQT1156_EN.book 8 ページ 2006年12月7日 木曜日 午後7時53分
Before using
If you insert a DVD-RW or a DVD-R disc recorded in this unit (that has not been finalized) into another device such as DVD recorder, computer, etc., the disc may become unusable. Be sure to finalize the disc on this unit before inserting it in other devices. (l 74)
Using with DVD player/recorder! (l 79)
Just insert the disc into a DVD player/recorder compatible with 8 cm discs to play back the scenes recorded with this unit on it. If you have a DVD recorder with hard disk, you can dub scenes recorded on a disc with this unit to the hard disk.
Using with a computer! (VDR-D310) (Refer to the operating instructions
for PC connection.)
You can enjoy editing scenes with the software on the supplied CD-ROM and creating original DVD-Video discs.
8
LSQT1156
LSQT1156_EN.book 9 ページ 2006年12月7日 木曜日 午後7時53分
Accessories
Check the accessories before using this unit.
Battery pack (VDR-D310)
CGA-DU12
Battery pack (VDR-D220)
CGR-DU06
AC adaptor
VSK0651B (DE-974GC)
DC cable
K2GJ2DC00011
AV/S cable
K2KZ9CB00001
AC cable (VDR-D310)
K2CQ2CA00006
(VDR-D220)
K2CR2DA00004
Remote control (VDR-D310)
N2QAEC000023
Button-type battery (VDR-D310)
CR2025
Lens cap
LSYK2004
USB cable (VDR-D310)
K1HA05CD0010
CD-ROM (VDR-D310)
Disc cleaning cloth
VFC3778-2
Optional accessories
Some optional accessories may not be available in some countries.
AC adaptor (VW-AD11E)
Battery pack (lithium/CGR-DU06/640 mAh) (VDR-D220)
Battery pack (lithium/CGA-DU12/1150 mAh)
Battery pack (lithium/CGA-DU14/1360 mAh)
Battery pack (lithium/CGA-DU21/2040 mAh)
Wide conversion lens (VW-LW3707M3E) (VDR-D310)
Tele conversion lens (VW-LT3714ME) (VDR-D310)
Filter kit (VW-LF37WE)
Video DC light (VW-LDC10E)
Light bulb for video DC light (VZ-LL10E)
Stereo microphone (VW-VMS2E) (VDR-D310)
Tripod (VW-CT45E)
8 cm DVD-RAM disc (single sided/LM-AF30E)
8 cm DVD-RAM disc (double sided/ LM-AF60E)
8 cm DVD-RW disc (single sided/LM-RW30E)
8 cm DVD-RW disc (double sided/ LM-RW60E)
8 cm DVD-R disc (single sided/LM-RF30E)
8 cm DVD-R disc (double sided/LM-RF60E)
8 cm DVD-R DL disc (dual layer on single side/LM-RF55LE)
USB cable (K1HA05CD0010) (VDR-D220)
Before using
9
LSQT1156
2
0
2 3 4
6
5
LSQT1156_EN.book 10 ページ 2006年12月7日 木曜日 午後7時53分
Before using
Parts identification and handling
1
1 Lens (LEICA DICOMAR) (VDR-D310)
Lens (VDR-D220) 2 Microphone (built-in, stereo) 3 White balance sensor (l 56)
Remote control sensor (VDR-D310) (l 15)
1
4
5
6 7 8
9
11
1 1 1
1
1
connection.) Disc access lamp [ACCESS/PC]
(VDR-D220) (l 27) 13 Mode dial (l 30) 14 Joystick (l 30) 15 Recording start/stop button (l 40) 16 Disc eject lever [DISC EJECT] (l 27)
17 18
3
19 20
17 When recording: Zoom lever [W/T] (l 47)
When playing back: Volume lever
[sVOLr] (l 60) 18 Photoshot button [ ] (l 43) 19 Accessory shoe
Accessories, such as a video DC light
(optional), are attached here.
20 Eyepiece corrector knob (l 37)
21
22
4 Menu button [MENU] (l 34) 5 Viewfinder (l 14)
Due to limitations in LCD production technology, there may be some tiny bright or dark spots on the viewfinder screen. However, this is not a malfunction and does not affect the recorded picture.
6 Delete button [ ] (l 64, 68, 71) 7 LCD monitor open part (l 13) 8 DC input terminal [DC/C.C. IN] (l 26) 9 Battery holder (l 22) 10 Power switch [OFF/ON] (l 26) 11 Status indicator (l 26) 12 Disc/computer access lamp [ACCESS/
PC] (VDR-D310) (l 27) (Refer to the operating instructions for PC
10
LSQT1156
21 Tripod receptacle (l 13) 22 Battery release lever [BATTERY] (l 22)
LSQT1156_EN.book 11 ページ 2006年12月7日 木曜日 午後7時53分
Before using
27
23
28 29
24
30
31 32
25
33
26
23 LCD monitor (l 13)
Due to limitations in LCD production technology, there may be some tiny bright or dark spots on the LCD monitor screen. However, this is not a malfunction and does not affect the recorded picture.
24 Terminal cover 25 Microphone terminal [MIC] (VDR-D310)
A compatible plug-in powered microphone
can be used as an external microphone.
When the unit is connected with the AC
adaptor, sometimes noise may be heard depending on the microphone type. In this case, please switch to the battery for the power supply and the noise will stop.
26 Audio-video output terminal [A/V]
(l 78, 81) 27 Speaker 28 Mode select switch [AUTO/MANUAL/
FOCUS] (l 39, 53, 54) 29 Reset button [RESET] (l 96) 30 Card slot cover [SD CARD] (l 29) 31 Card access lamp (l 30) 32 Card slot (l 29) 33 USB terminal [ ] (l 81)
(Refer to the operating instructions for PC
connection.) (VDR-D310)
34
35
34 Disc compartment (l 27) 35 Grip belt (l 11)
Using grip belt
Adjust the belt length so it fits your hand.
Adjust the belt length and the pad position.
2
3
1 Flip the belt. 2 Adjust the length. 3 Replace the belt.
1
Attaching the lens cap
Attach the lens cap to protect the surface of the lens. When the MC protector or the ND filter of the
Filter Kit (VW-LF37WE; optional) is attached, use the lens cap included in the Filter Kit.
11
LSQT1156
LSQT1156_EN.book 12 ページ 2006年12月7日 木曜日 午後7時53分
Before using
1 Pass the end of the lens cap cord
through the belt.
Lens hood
VDR-D310 Rotate the lens hood counter-
clockwise A to remove it. In order to attach it, place into slot B, and then rotate it clockwise C.
2 Pass the lens cap through the
loop.
3 To attach or remove the lens cap,
hold both sides of the lens cap
with the tips of your finger and
thumb.
A
B
During recording
The removed lens cap can be attached to the lens cap fixture.
12
LSQT1156
C
Attach the MC protector or the ND filter of the
Filter Kit (VW-LF37WE; optional) in front of the lens hood. Do not attach the other accessories on the hood. (Except for the lens cap) (Refer to the operating instructions for the Filter Kit.)
When attaching the tele conversion lens
(VW-LT3714ME; optional) or the wide conversion lens (VW-LW3707M3E; optional), first remove the lens hood. (Refer to the operating instructions for the tele conversion lens or the wide conversion lens.)
AB
LSQT1156_EN.book 13 ページ 2006年12月7日 木曜日 午後7時53分
Before using
When 2 lens accessories, such as the ND filter
and tele conversion lens, are attached and the W/T lever is pressed toward the W side, the 4 corners of an image will be darkened. (Vignetting)
VDR-D220 Rotate the lens hood counter-
clockwise A to remove it. In order to attach it, rotate it clockwise B.
A
B
(Please carefully read the operating instructions for how to attach the unit to the tripod.)
When the tripod is used, the card slot cover
cannot be opened. Insert an SD card before attaching this unit to the tripod. (l 29)
Using the LCD monitor
You can record the image while viewing it on the LCD monitor.
1 Place your finger on the LCD
monitor open part A and pull the LCD monitor out in the direction of the arrow.
Do not attach the accessories on the hood.
(Except for the lens cap)
When attaching the MC protector or the ND
filter of the Filter Kit (VW-LF37WE; optional), first remove the lens hood. (Refer to the operating instructions for the accessories.)
Tripod receptacle
This is a hole for attaching the unit to the optional tripod.
A
It can open up to 90o.
2 Adjust the angle of the LCD
monitor as desired.
It can rotate up to 180o A towards the lens or
90o B towards the viewfinder.
13
LSQT1156
0
LSQT1156_EN.book 14 ページ 2006年12月7日 木曜日 午後7時53分
Before using
The brightness and colour level of the LCD
monitor can be adjusted from the menu. (l 37)
The unit may be damaged or fail if the LCD
monitor is forcibly opened or rotated.
If the LCD monitor is rotated by 180x towards
the lens and the viewfinder is extended (when recording yourself), the LCD monitor and the viewfinder simultaneously light.
Using the viewfinder
Pull out the viewfinder.
The viewfinder will be activated. (If the LCD monitor is opened, the viewfinder will be deactivated.)
The brightness of the viewfinder (l 37) and
the field of view (l 37) can be adjusted.
Using the remote control (VDR-D310)
1
2
3
4
EXT
DISPLAY
DATE/
TIME
SEARCH
STILL ADV STILL ADV
5
6
1 Photoshot button [PHOTO SHOT, ]* 2 On-screen display button [EXT DISPLAY]
(l 79) 3 Date/time button [DATE/TIME] (l 36) 4 Playback operation buttons (l 59) 5 Delete button [ ]* 6 Direction buttons [3,4,2,1] (l 35) 7 Recording start/stop button [START/
STOP]* 8 Zoom/volume buttons [ZOOM, VOL]* 9 Menu button [MENU]* (l 35) 10 Enter button [ENTER] (l 35)
* means that these buttons function in the same
manner as the corresponding buttons on the unit.
START/
PHOTO
STOP
SHOT
ZOOM
VOL
PLAY
SEARCH
PAU S E
STOPSKIP SKIP
MENU
ENTER
7
8
9
1
14
LSQT1156
Install a button-type battery
Install the supplied button-type battery in the remote control before using it.
A
LSQT1156_EN.book 15 ページ 2006年12月7日 木曜日 午後7時53分
Before using
1 While pressing the stopper A,
pull out the battery holder.
2 Set the button-type battery with
its (r) mark facing upward and then put the battery holder back in place.
Concerning the button-type batteryWhen the button-type battery runs down,
replace it with a new battery (part number: CR2025). The battery should normally last about 1 year, however this depends on how frequently the unit is used.
Keep the button-type battery out of the reach of
children.
Remote control usable range
The distance between the remote control and the unit’s remote control sensor A: Within approx. 5m Angle: Approx. 10o up and 15o down, left, and right
AA
The remote control is intended for indoor
operation. Outdoors or under strong light, the unit may not operate properly even within the usable ranges.
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.
Warning
Risk of fire, explosion and burns. Do not recharge, disassemble, heat above 60xC or incinerate.
Warning
Keep the Button-Type battery out of the reach of children. Never put Button-Type battery in mouth. If swallowed call your doctor.
15
LSQT1156
LSQT1156_EN.book 16 ページ 2006年12月7日 木曜日 午後7時53分
Before using
Discs and cards
Discs that can be used on this unit
Disc type DVD-RAM
8 cm
Single sided/
DVD-RW
8 cm
Single sided/double sided
double sided
(DVD-RAM
[DVD-RW Ver. 1.1/2X-SPEED (2X/1X)]
Ver. 2.1)
Recording format DVD Video
Recording format (VR format)
DVD Video Recording format (VR format)
DVD-Video format (Video format)
Characteristic Rewritable disc Rewritable disc One time recording
*1
disc
Display on the screen
Indication in these instructions
(RAM) (-RW‹VR›) (-RW‹V›)
Functions
Deleting recorded scenes ¥¥ –
Editing on this unit ¥¥ –
Playback on other
products
*2
Recording after finalizing ¥¥
*3
¥
*4
¥
*5
¥
*6
16
LSQT1156
LSQT1156_EN.book 17 ページ 2006年12月7日 木曜日 午後7時53分
Before using
Disc type DVD-R
8 cm
Single sided/double sided
DVD-R DL
8cm
Dual layer on single side
(DVD-R for General Ver. 2.0) (DVD-R for DL Ver. 3.0)
Recording format DVD-Video format
(Video format)
DVD-Video format (Video format)
Characteristic One time recording disc One time recording disc
Display on the screen
Indication in these instructions
(-R)
Functions
Deleting recorded scenes
Editing on this unit
Playback on other
products
*2
*5
¥
Recording after finalizing
¥: available –: not available
*1 By formatting the disc, it can be used repeatedly. (l 75) *2 DVD players and DVD recorders that support 8 cm discs. *3 Playback is possible on compatible products. *4 Must be finalized on this unit. (l 74) Playback is possible on compatible products. *5 Must be finalized on this unit. (l 74) Playback of DVD-R DL is possible on compatible products. *6 Un-finalize the disc. (l 75)
17
LSQT1156
LSQT1156_EN.book 18 ページ 2006年12月7日 木曜日 午後7時53分
Before using
For the purposes of these operating instructions, DVD-R and DVD-R DL are referred to as the
“DVD-R”.
Still pictures cannot be recorded on a disc with this unit.You cannot record or play continuously from one side of the disc to the other when using a double
sided disc. You will need to eject the disc and turn it over.
Discs inserted in a holder, cartridge, or caddy case cannot be used. Always remove bare discs from
these containers prior to use.
It is recommended that you use Panasonic discs. Usually discs compatible with the DVD standard
can be used for recording and playback with no problems. However, some commercially available discs do not meet the DVD standard for quality and performance. If you use one of these discs, you may not be able to record or playback normally. (The message “FOR BEST PERFORMANCE PANASONIC DISC IS RECOMMENDED.” appears.) Refer to the following support site for information about discs that have been confirmed as compatible by Panasonic. http://panasonic.co.jp/pavc/global/cs/e_cam (This website is in English only.)
Discs recorded on this unit may not be playable on other products.Recording on DVD-R in DVD Video Recording format is not supported.When using DVD-RW or DVD-R, do not perform the following as it may make the disc
unusable.
jRecord on a disc with other products after recording on it with this unit. jRecord on a disc with this unit after recording on it with other products. jInsert an un-finalized disc in any other products.
About format types
What is the DVD Video Recording format (VR format)?
This is a format for recording on DVD discs which allows you to record and erase repeatedly and create playlists. You can record on DVD­RAM and DVD-RW in DVD Video Recording
What is the DVD-Video format (Video format)?
By finalizing the disc, it can be played back on most DVD players. You can record on DVD-RW and DVD-R in DVD­Video format with this unit.
format with this unit.
If a disc is recorded in VR format, the data can be exported on a computer.
About DVD-R DL (Dual Layer)
DVD-R DL (Dual Layer) discs have two layers of recording/playback surface on one side. If the first layer (L0) becomes full during recording, the recording continues uninterrupted on the second layer (L1). However, the recorded picture is divided into 2 scenes at the point where the layers switch. The unit automatically switches layers during disc playback so you can play the whole of the disc continuously like a normal disc. However, the image or sound momentarily stop at the point where the layers switch.
Examples of discs that cannot be used on this unitDiscs other than those with diameter of 8 cm CD-RWDouble layer discs other than DVD-R DL CD-R ≥iRW ≥ CD-ROM ≥iR ≥ CDDVD-ROMDVD-Video
18
LSQT1156
LSQT1156_EN.book 19 ページ 2006年12月7日 木曜日 午後7時53分
Before using
When using brand-new DVD-RW
When using DVD-RW, select whether to record in DVD Video Recording format (VR format) or DVD­Video format (Video format) and then format the disc. (l 18, About format types)
1 When a brand-new DVD-RW is inserted in this unit,
the screen on the right appears. Select [YES], then press the joystick.
2 Select format type, then press the joystick.
[VIDEO]: DVD-Video format [VR]: DVD Video Recording format
3 When the confirm screen appears, select [YES],
then press the joystick.
To change the format type, format the disc again. (l 75)
If the disc is formatted, then all the data recorded on the disc will be erased.
19
LSQT1156
LSQT1156_EN.book 20 ページ 2006年12月7日 木曜日 午後7時53分
Before using
Cards that you can use with this unit
Card type SD Memory Card SDHC Memory Card
8 MB, 16 MB, 32 MB, 64 MB,
Capacity
Indication in these instructions
This unit is compatible with both SD Memory cards and SDHC Memory cards. You can only use SDHC Memory cards on devices that are compatible with them. You cannot use SDHC Memory cards on devices that are only compatible with SD Memory cards. (When using an SDHC Memory card on another device, be sure to read the operating instructions for that device.)
For the purposes of these operating instructions, SD Memory Card and SDHC Memory Card are
referred to as the “SD card”.
Motion pictures cannot be recorded on an SD card with this unit.Please confirm the latest information on the following website. (This website is in English only.)
http://panasonic.co.jp/pavc/global/cs/e_cam
This unit supports SD Memory Cards formatted in FAT12 system and FAT16 system based on SD
Memory Card Specifications and SDHC Memory Cards formatted in FAT32 system.
Use this unit to format SD cards. If an SD card is formatted on other products (such as a computer),
the time spent for recording may become longer and you may not be able to use the SD card. (l 76)
We recommend that you use a Panasonic brand SD card.When the write-protect switch A on SD card is locked, no recording, deletion or
editing will be possible on the card.
128 MB, 256 MB, 512 MB, 1 GB, 2GB
4GB
(SD)
A
Keep the Memory Card out of reach of children to prevent swallowing.A MultiMediaCard cannot be used on this unit.
20
LSQT1156
LSQT1156_EN.book 21 ページ 2006年12月7日 木曜日 午後7時53分
Before using
Disc and card handling
How to hold a disc or card
Do not touch the recording/playback surface or the terminal surface.
When inserting/removing a disc
Do not allow the recording/playback side of the disc to get fingerprints or dirty. If there is a scratch or dirt (e.g. dust or fingerprints) on the recording/playback side of the disc, images
cannot be recorded or played back normally and the following phenomena may occur:
jRecording or playback become impossible. jPlayback image stops momentarily or sound is interrupted during playback. jBlock noise appears on playback images. jThe message “PLEASE CHECK FOR SCRATCHES OR STAINS ON DISC.” appears.
If there is dirt on the disc
Clean it with the supplied disc cleaning cloth. Wipe the disc from the centre to the outer edge to remove the dirt. Do not use force when wiping the disc as it may scratch it. Also, do not use solvents (thinner, water, antistatic agent, detergent etc.)
Handling precautionsBe careful about scratches and dirt.Do not attach labels or stickers to discs.
(This may cause disc warping and un-balanced rotation, rendering it unusable.)
Write on the label side of the disc only with a soft, oil-based felt pen. Do not use ballpoint pens or
other hard writing implements.
Do not use record cleaning sprays, benzine, thinner, static electricity prevention liquids or any other
solvent.
Do not use scratch-proof protectors or covers.Do not drop, stack, or impact discs. Do not place objects on them.Do not use the following discs:
jDiscs with exposed adhesive from removed stickers or labels. jDiscs that are badly warped or cracked. jIrregularly shaped discs, such as heart shapes.
Do not expose the terminals of the card to water, garbage or dust.Do not place in the following areas:
jIn direct sunlight. jIn very dusty or humid areas. jNear a heater. jLocations susceptible to significant difference in temperature (condensation can occur). jWhere static electricity or electromagnetic waves occur.
Put discs and cards back in their cases for protection when not using them.
21
LSQT1156
LSQT1156_EN.book 22 ページ 2006年12月7日 木曜日 午後7時53分
Setup
Setup
Power supply
Fitting the battery
Charging the battery
When this unit is purchased, the battery is not charged. Charge the battery before using this unit.
If the DC cable is connected to the AC
adaptor, then the battery will not charge. Remove the DC cable from the AC adaptor.
A
1 Connect the AC cable to the AC
adaptor and the AC outlet.
2 Put the battery on the battery
mount by aligning the mark, and then securely plug it in.
The output plug of the AC cable is not
completely connected to the AC adaptor socket. As shown in A, there is a gap.
Charging lamp
Lights up: Charging Goes off: Charging completed Flashing: The battery is over discharged
(discharged excessively). In a while, the lamp will light up and normal charging will start. When the battery temperature is excessively high or low, the CHARGE lamp flashes and the charging time will be longer than normal.
Push the battery against the battery holder and slide it until it clicks.
Removing the battery
While sliding the BATTERY lever, slide the battery to remove it.
Hold the battery with your hand so it does not
fall.
Before removing the battery, be sure to set the
OFF/ON switch to OFF and check that the status indicator is off.
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.
Battery charging time (l 23)We recommend using Panasonic batteries.
(l 9)
If you use other batteries, we cannot guarantee
the quality of this product.
22
LSQT1156
LSQT1156_EN.book 23 ページ 2006年12月7日 木曜日 午後7時53分
Setup
Charging time and recordable time
The times shown in the tables below are for when the temperature is 25 oC and the humidity is 60%. If the temperature is higher or lower than 25 oC, the charging time will become longer.
Charging timeThe charging time shown in the table are approximations.
“2 h 25 min” indicates 2 hours 25 minutes.
VDR-D310:
Battery model number Voltage/capacity Charging time
Supplied battery/
CGA-DU12 (optional) CGA-DU14 (optional) 7.2 V/1360 mAh 2 h 45 min CGA-DU21 (optional) 7.2 V/2040 mAh 3 h 55 min
VDR-D220:
Battery model number Voltage/capacity Charging time
Supplied battery/
CGR-DU06 (optional) CGA-DU12 (optional) 7.2 V/1150 mAh 2 h 25 min CGA-DU14 (optional) 7.2 V/1360 mAh 2 h 45 min CGA-DU21 (optional) 7.2 V/2040 mAh 3 h 55 min
7.2 V/1150 mAh 2 h 25 min
7.2 V/640 mAh 1 h 40 min
23
LSQT1156
LSQT1156_EN.book 24 ページ 2006年12月7日 木曜日 午後7時53分
Setup
Recordable time (When using a DVD-RAM disc)The times indicate the recordable time when the viewfinder is used. The times in parentheses
indicate the recordable time when the LCD monitor is used.
The actual recordable time refers to the recordable time on a disc when repeatedly starting/stopping
recording, turning the unit on/off, moving the zoom lever, etc.
“1 h 25 min” indicates 1 hour 25 minutes.
VDR-D310:
Battery model
number
Supplied
battery/
CGA-DU12
(optional)
CGA-DU14
(optional)
CGA-DU21
(optional)
Voltage/
capacity
7.2 V/
1150 mAh
7.2 V/
1360 mAh
7.2 V/
2040 mAh
Recording
mode
XP
SP
LP
XP
SP
LP
XP
SP
LP
Maximum
continuously
recordable time
1h25min
(1 h 20 min)
1h40min
(1 h 30 min)
1h45min
(1 h 40 min)
1h45min
(1 h 40 min)
2h
(1 h 50 min)
2h5min
(1 h 55 min)
2h50min
(2 h 40 min)
3h10min
(3 h)
3h20min
(3h5min)
Actual recordable
time
35 min
(35 min)
45 min
(40 min)
45 min
(45 min)
45 min
(45 min)
50 min
(50 min)
55 min
(50 min)
1h15min
(1 h 10 min)
1h25min
(1 h 20 min)
1h30min
(1 h 20 min)
VDR-D220:
Battery model
number
Supplied
battery/
CGR-DU06
(optional)
CGA-DU12
(optional)
Voltage/
capacity
7.2 V/
640 mAh
7.2 V/
1150 mAh
Recording
mode
XP
SP
LP
XP
SP
LP
Maximum
continuously
recordable time
1h5min
(1 h)
1h20min
(1 h 10 min)
1h25min
(1 h 15 min)
2h
(1 h 50 min)
2h20min
(2 h 10 min)
2h30min
(2 h 15 min)
Actual recordable
time
30 min
(25 min)
35 min
(30 min)
35 min
(30 min)
55 min
(50 min)
1h
(55 min)
1h5min
(1 h)
24
LSQT1156
LSQT1156_EN.book 25 ページ 2006年12月7日 木曜日 午後7時53分
Setup
Battery model
number
CGA-DU14
(optional)
CGA-DU21
(optional)
Voltage/
capacity
7.2 V/
1360 mAh
7.2 V/
2040 mAh
Recording
mode
XP
SP
LP
XP
SP
LP
Maximum
continuously
recordable time
2h35min
(2 h 20 min)
3h
(2 h 40 min)
3h10min
(2 h 50 min)
3h50min
(3 h 30 min)
4h30min (4h5min)
4h45min
(4 h 20 min)
Actual recordable
time
1h5min
(1 h)
1h20min
(1 h 10 min)
1h25min
(1 h 15 min)
1h40min
(1 h 35 min)
2h
(1 h 50 min)
2h5min
(1 h 55 min)
The display changes as the battery capacity reduces.
####.
If the battery discharges, then ( ) will flash.
The recordable times will vary depending on the status of use. These times are approximations. The
recordable time will become shorter when you use both the viewfinder and the LCD monitor simultaneously while rotating the LCD monitor frontward to record yourself, etc.
The batteries heat up after use or charging. This unit will also heat up while being used. This is not a
malfunction.
Be aware that the operating time of the battery will become shorter in low temperatures. We
recommend charging a spare battery for use when recording.
25
LSQT1156
A
LSQT1156_EN.book 26 ページ 2006年12月7日 木曜日 午後7時53分
Setup
Connecting to the AC outlet
The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always “live” as long as the AC adaptor is connected to an electrical outlet.
1 Connect the AC cable to the AC
adaptor and the AC outlet.
2 Connect the DC cable to the AC
adaptor.
3 Connect the DC cable to this unit.
How to turn on the power
While pressing the button A, set the OFF/ON switch to ON.
A
B
The status indicator B lights and the power turns on. When the unit is turned on for the first time, a
message asking you to set the date and time will appear. Select [YES] and set the date and time. (l 36)
How to turn off the power
While pressing the button A, set the OFF/ON switch to OFF.
Do not use the AC cable with any other
equipment as it is designed only for this unit. Do not use the AC cable from other equipment with this unit.
While the DC cable is connected to the AC
adaptor, the battery will not charge.
Turning the unit on/off
When recording, remove the lens cap before
turning the unit on. If the unit is turned on with the lens cap attached, the automatic white balance adjustment (l 100) may not function properly.
26
LSQT1156
B
The status indicator B goes off when the power turns off.
LSQT1156_EN.book 27 ページ 2006年12月7日 木曜日 午後7時53分
To turn off the power
When the power is turned on for the first time after changing the disc or battery, the unit carries out a recognition procedure to check that there are no problems with the disc. This takes approximately 25 seconds with DVD-RAM. If you want to start using the unit as soon as you turn on the power, do the following.
1) Turn on the power.
2) After “READING DISC...” disappears from the screen, turn off the power.
You can start recording approximately 8 seconds after you turn on the power again. Depending on the condition of the disc, it
may take longer than this.
If the date and time are not set, it will take
longer than usual before you can start recording.
Close the LCD monitor and retract the viewfinder.
The status indicator goes off and the power turns off. The power will not turn off unless the LCD
monitor is closed and the viewfinder is retracted.
The power will not turn off while recording on a
disc even if the LCD monitor is closed and the viewfinder is retracted.
Setup
How to turn the power on and off with the LCD monitor/viewfinder
When the OFF/ON switch is set to ON, the power can be turned on and off with the LCD monitor and the viewfinder when the unit is in video recording mode or picture recording mode.
To turn on the power Open the LCD monitor or extend the
viewfinder.
The status indicator lights and the power turns on.
Set the OFF/ON switch to OFF when the unit is not being used.
Inserting/removing a disc
When inserting or removing the disc, fit the charged battery pack or connect the AC adaptor to the unit. The cover of the disc compartment will not open unless the unit is powered.
1 Fit the battery or connect the AC
adaptor.
2 Slide the DISC EJECT lever once
and release it.
27
LSQT1156
LSQT1156_EN.book 28 ページ 2006年12月7日 木曜日 午後7時53分
Setup
A few moments after the ACCESS/PC lamp blinks, the cover of the disc compartment will open slightly.
3 Open the cover of the disc
compartment by hand and insert/ remove the disc.
Inserting disc
Fit the disc onto the spindle in the centre and then push the disc down until it clicks into place.
A Recording/playback side B Pickup lens
B
A
Removing disc
While pressing down on the spindle, grasp the edge of the disc and gently lift it out.
Take care not to touch the recording/playback
sides of a disc when inserting or removing it.
28
LSQT1156
4 Push the section marked
PUSH CLOSE on the cover of the disc compartment to close the cover.
If you use a new DVD-RW, it is necessary to
format the disc. (l 19)
Identifying recording/playback sides of
disc
Single sided disc:
The recording/playback side is opposite to the labelled side.
Double sided disc:
The “SIDE A” recording/playback side is the side opposite the side with the “SIDE A” mark. The
A
B
LSQT1156_EN.book 29 ページ 2006年12月7日 木曜日 午後7時53分
Setup
“SIDE B” recording/playback side is the side with the “SIDE A” mark.
M
/
S
A
I
D
R
-
E
D
A
V
D
A “SIDE A” mark B The opposite side is the “SIDE A” recording/
playback side.
Do not use excessive force when opening the
cover.
Do not touch the pickup lens or the recording/
playback side of the disc. This may impair recording and playback.
Insert the disc securely to prevent damage.When you open the cover, the ACCESS/PC
lamp flashes red. Do not leave the cover open.
If the cover is open, the power will not turn off
even if the OFF/ON switch is set to OFF.
If the disc is not correctly inserted, the cover
will not close. Never try to forcibly close the cover. This could cause damage. Reinsert the disc properly.
If a single sided disc is inserted into the unit
with the printed label facing the inside, an error message will appear. Remove the disc and reinsert it with its recording/playback side facing the inside.
Do not allow the recording/playback side to
become dirty or scratched.
Do not remove the battery pack or disconnect
the AC adaptor while removing the disc or until power is completely turned off. If you do, the cover will not open. If this happens, reattach the battery pack or reconnect the AC adaptor, slide the DISC EJECT lever once, and then release it. A repair disc message may be displayed when the power is turned back on. (l 90, About recovery)
Do not insert anything other than the 8 cm
DVD-RAM, DVD-RW, DVD-R or DVD-R DL disc into the disc compartment. Doing so could cause malfunctions. (l 18, Examples of discs that cannot be used on this unit)
Do not touch the pickup lens or other parts
inside the disc compartment. Be sure not to
touch the area around the pickup lens for it becomes extremely hot.
After inserting a disc/After recording finishes
While the ACCESS/PC lamp is lit, the disc is rotating and disc information is being recorded. If the power supply is interrupted at this time, the disc may become unusable. Do not disconnect the AC adaptor or remove the battery. Also, do not strongly shake or cause impact to the unit.
Inserting/removing an SD card
Before inserting/removing an SD card, be sure to set the OFF/ON switch to OFF.
If the SD card is inserted or removed while the OFF/ON switch is set to ON, this unit may malfunction or the data recorded on the SD card may be lost.
1 Set the OFF/ON switch to OFF to
turn off the power.
Check that the status indicator has gone off.
2 Slide the card slot cover to open.
29
LSQT1156
LSQT1156_EN.book 30 ページ 2006年12月7日 木曜日 午後7時53分
Setup
3 Insert/remove the SD card into/
from the card slot.
A
When inserting an SD card, face the label side
A upwards and press it straight in as far as it goes.
When removing the SD card, press the centre
of the SD card and then pull it straight out.
4 Securely close the card slot
cover.
Concerning the SD cardElectrical noise, static electricity or failure of
this unit or the SD card may damage or erase the data stored on the SD card. We recommend saving important data on a computer.
Card access lamp
Selecting a mode
The mode dial is used to switch between recording and playback modes. Rotate the mode dial slowly but surely.
Rotate the mode dial, and set the desired mode pictograph to the position shown in the illustration.
Video recording mode (l 40)
Use this to record motion pictures on a disc.
Video playback mode (l 58)
Use this to play back motion pictures on a disc.
Picture recording mode (l 43)
Use this to record still pictures on an SD card.
Picture playback mode (l 62)
Use this to play back still pictures on an SD card.
When this unit accesses the SD card (reading,
recording, playback, erasing, etc.), the access lamp lights up.
If the following operations are performed when
the access lamp is lit, then the SD card or the recorded data may be damaged or this unit may malfunction.
sRemoving the SD card sOperating the OFF/ON switch or the mode
dial
sRemoving the battery or disconnecting
the AC adaptor
30
LSQT1156
Do not forcefully rotate the dial.
How to use the joystick
This unit has a joystick for selecting functions, performing operations, etc. so it is easy to operate this unit with one hand.
Basic operations
Operations on the menu screen and selection of files on the thumbnail view screen, etc.
Loading...
+ 190 hidden pages