Panasonic UD-794 User Manual

The Model UD-794 Thermoluminescent
Dosimeter (TLD) Irradiator is a system designed to irradiate dosimeters. The irradiator consists of a Gamma radiation source, shielding material, a channel inside the shield in which to position and irradiate the dosimeter, a mechanism by which to move the dosimeter from its tray, an attenu­ator, a control panel, and safety interlocks. All components are inside a self-contained unit, constructed of sheet metal panels for safety.
The source used in the device meets special form encapsulation criteria and is permanently mounted inside a shield that completely surrounds the source. An attenuator allows for delivery of a low or high dose rate to the dosimeter. The dosimeter channel runs through the shield, allowing exposure to occur. A motor-driven lift mechanism moves the dosimeter into and out of the shield, up the channel. The control panel, integrated with the system computer, shows system status.
With the built in Auto-Changer which can accommodate 10 magazines of 50 TL Badges each, batch irradiation of 500 badges is possible.
Computerized Type Automatic Irradiator
with Built-In Auto-changer
UD-794
UD-794
12
FEATURES
Simplified Operation - Automatic irradiation can be started by just pressing one key. This simplifies training for operators/technicians.
Batch Irradiation - With the Built In Auto- changer, batch irradiation of 500 badges is possible.
Radioactive Isotope -
137
Cs (nominal 2.0 Curies). 74GBq Standard. Other activities are available.
Half Life - 30 years
• External Radiation Level -
Less than 0.5 mR/hr (5µSv/hr) at a distance of 30 cm from surface of shield.
High Dose Rate - Approx. 30mR/sec (300µSv/sec)
Cycle Time - Dose dependent
Power Supply (Factory Preset)
100/115/220/230/240V AC/50-60Hz
Windows based Control Software - PC and Monitor are included
Communications - to Host PC or Mainframe through built in RS232 Interface
UD-794
UD-794
FEATURES
SPECS
Applicable TL Badge
UD-800 series ( All Panasonic TLD Badges)
TL Badge Loading
Automatic loading with Built In Auto­changer for 10 magazines 50 badges per magazine x10 magazines =500 badge capacity
Weight
and Dimensions
Approx. 300kg Approx. 1000(W) x 1120(H) x 550(D)mm
Panasonic Industrial Company
Division of Panasonic Corporation of North America Attention Radiation Measurement Group 2 Panasonic Way # 7E6 Secaucus NJ 07094
USA
Tel +1 201-348-5339
Panasonic Industrial Europe GmbH (UK)
Attention Radiation Measurement Group Willoughby Road, Bracknell Berkshire RG12 8FP,
Great Britain
Tel: +44 1344-853-322
Panasonic Communications Kyushu Co.,Ltd.
Attention Radiation Measurement Group 2111 Ueda Usa Oita 879-0493
Japan
Tel: +81 978-37-3151
13
Loading...