Panasonic TX39AS600YW User Manual [en, it, cs]

English

Italiano

Česky

Operating Instructions

LCD Television

32-inch model

39-inch model 42-inch model

50-inch model

Model No.

TX-32AS600Y TX-42AS600Y TX-32AS600YW TX-42AS600YW TX-39AS600Y TX-50AS600Y TX-39AS600YW

Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and

retain them for future reference. The images shown in this manual are for illustrative purposes only. Please refer to Pan European Guarantee Card if you need to contact your

local Panasonic dealer for assistance.

M0114-0 English

For more detailed instructions, refer to [eHELP] (Built-in Operating Instructions).

●

How to use [eHELP] (p. 16)

TQB0E2391P2

Contents

Be Sure to Read

Important Notice··················································· 3 Safety Precautions ··············································· 4

Quick Start Guide

Accessories ························································ 6 Connections ························································ 8 Identifying Controls ··············································12 First time Auto Setup ············································14

Using your VIERA

Operations ·························································15 How to Use eHELP ··············································16

Others

FAQs ································································17 Maintenance ······················································18 Specifications ·····················································18

English

●

For the information of the trademarks, refer to [eHELP] (Support > Licence).

The illustration for TX-50AS600Y is used in this manual unless otherwise mentioned.

Illustrations shown may be different depending on the model.

Important Notice

Notice for DVB / Data broadcasting / IPTV functions

●

This TV is designed to meet the standards (as of August, 2013) of DVB-T / T2 (MPEG2 and MPEG4AVC(H.264)) digital terrestrial services, DVB-C (MPEG2 and MPEG4-AVC(H.264)) digital cable services.

Consult your local dealer for availability of DVB-T / T2 services in your area.

Consult your cable service provider for availability of DVB-C services with this TV.

●

This TV may not work correctly with the signal which does not meet the standards of DVB-T / T2 or DVB-C.

●

Not all the features are available depending on the country, area, broadcaster, service provider and network environment.

●

Not all CI modules work properly with this TV. Consult your service provider about the available CI module.

●

This TV may not work correctly with CI module that is not approved by the service provider.

●

Additional fees may be charged depending on the service provider.

●

The compatibility with future services is not guaranteed.

●

Check the latest information on the available services at the following website. (English only)

http://panasonic.net/viera/support

Panasonic does not guarantee operation and performance of peripheral devices made by other manufacturers; and we disclaim any liability or damage arising from operation and/or performance from usage of such other maker’s peripheral devices.

This product is licensed under the AVC patent portfolio license for the personal and non-commercial use of a consumer to (i) encode video in compliance with the AVC Standard (“AVC Video”) and/or (ii) decode AVC Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a video provider licensed to provide AVC Video. No license is granted or shall be implied for any other use.

Additional information may be obtained from MPEG LA, LLC.

See http://www.mpegla.com.

Rovi Corporation and/or its subsidiaries and related affiliates are not in any way liable for the accuracy or availability of the program schedule information or other data in the GUIDE Plus+/Rovi Guide system and cannot guarantee service availability in your area. In no event shall Rovi Corporation and/or its related affiliates be liable for any damages in connection with the accuracy or availability of the program schedule information or

other data in the GUIDE Plus+/Rovi Guide system.

Transport only in upright position

English

Safety Precautions

To help avoid risk of electrical shock, fire, damage or injury, please follow the warnings and cautions below:

■ Mains plug and lead

Warning

If you detect anything unusual, immediately remove the mains plug.

●

This TV is designed to operate on AC 220-240 V, 50 / 60 Hz.

●

Insert the mains plug fully into the socket outlet.

●

Ensure that the mains plug is easily accessible.

●

Disconnect the mains plug when cleaning the TV.

●

Do not touch the mains plug with wet hands.

●

Do not damage the mains lead.

Do not place a heavy

•

object on the lead.

Do not place the lead near

•

a high temperature object.

Do not pull on the lead.

•

Hold onto the mains plug body when disconnecting the plug.

Do not move the TV with the lead plugged into a

•

socket outlet. Do not twist the lead, bend it excessively or stretch

•

it. Do not use a damaged mains plug or socket outlet.

•

Ensure the TV does not crush the mains lead.

•

●

Do not use any mains lead other than that provided with this TV.

■ Take care

Warning

●

Do not remove covers and never modify the TV yourself as live parts are accessible when they are removed. There are no user serviceable parts inside.

●

Do not expose the TV to rain or excessive moisture. This TV must not be exposed to dripping or splashing water and objects filled with liquid, such as vases, must not be placed on top of or above the TV.

●

Do not insert foreign objects into the TV through the air vents.

●

Do not use an unapproved pedestal / mounting

English

equipment. Be sure to ask your local Panasonic dealer to perform the setup or installation of approved wall-hanging brackets.

●

Do not apply strong force or impact to the display panel.

●

Do not place the TV on sloped or unstable surfaces, and ensure that the TV does not hang over the edge of the base.

●

This TV is designed for table-top use.

●

Do not expose the TV to direct sunlight and other sources of heat.

To prevent the spread of fire, keep candles or other open flames away from this product at all times

■ Dangerous part / Small object

Warning

●

This product contains possibly dangerous parts such as plastic bags, that can be breathed in or swallowed by young children accidentally. Keep these parts out of reach of young children.

■ Pedestal

Warning

●

Do not disassemble or modify the pedestal.

Caution

●

Do not use any pedestal other than the one provided with this TV.

●

Do not use the pedestal if it becomes warped or physically damaged. If this occurs, contact your nearest Panasonic dealer immediately.

●

During setup, make sure that all screws are securely tightened.

●

Ensure that the TV does not suffer any impact during installation of the pedestal.

●

Ensure that children do not climb onto the pedestal.

●

Install or remove the TV from the pedestal with at least two people.

●

Install or remove the TV by the specified procedure.

■ Radio wave

Warning

●

Do not use the TV in any medical institutions or locations with medical equipment. Radio waves may interfere with the medical equipment and cause accidents due to the malfunction.

●

Do not use the TV near any automatic control

equipment such as automatic doors or fire alarms. Radio waves may interfere with the automatic control equipment and cause accidents due to the malfunction.

●

Keep the distance at least 22 cm from the TV when you have a cardiac pacemaker. Radio waves may interfere with the operation of the pacemaker.

●

Do not disassemble or alter the TV in any way.

■ Built-in wireless LAN

Caution

●

Do not use the built-in wireless LAN to connect to any wireless network (SSID*) for which you do not have usage rights. Such networks may be listed as a result of searches. However, using them may be regarded as illegal access.

SSID is a name for identifying a particular wireless network for transmission.

●

Do not subject the built-in wireless LAN to high temperatures, direct sunlight or moisture.

●

Data transmitted and received over radio waves may be intercepted and monitored.

●

The built-in wireless LAN uses 2.4 GHz and 5 GHz frequency bands. To avoid malfunctions or slow response caused by radio wave interference, keep the TV away from the devices such as other wireless LAN devices, microwaves, mobile phones and the devices that use 2.4 GHz and 5 GHz signals when using the built-in wireless LAN.

●

When noises occur due to the static electricity, etc., the TV might stop operating for the protection of the devices. In this case, turn the TV off with Mains power On / Off switch, then turn it on again.

●

Additional information for the wireless LAN and access point may be on the following website.

(English only) http://panasonic.net/viera/support

■ Ventilation

Caution

Allow sufficient space around the TV in order to help prevent excessive heat, which could lead to early failure of some electronic components.

Minimum distance:

●

Ventilation should not be impeded by covering the ventilation openings with items such as newspapers, tablecloths and curtains.

●

Whether you are using a pedestal or not, always ensure the vents at the bottom of the TV are not blocked and there is sufficient space to enable adequate ventilation.

(cm)

■ Moving the TV

Caution

Before moving the TV, disconnect all cables.

39-inch model 42-inch model 50-inch model

●

Move the TV with at least two people. Support as shown to avoid injury by the TV tipping or falling.

■ When not in use for a long time

Caution

This TV will still consume some power even in the Off mode, as long as the mains plug is still connected to a live socket outlet.

●

Remove the mains plug from the wall socket when the TV is not in use for a prolonged period of time.

■ Excessive volume

Caution

●

Do not expose your ears to excessive volume from the headphones. Irreversible damage can be caused.

●

If you hear a drumming noise in your ears, turn down the volume or temporarily stop using the headphones.

■ Battery for the Remote Control

Caution

●

Incorrect installation may cause battery leakage, corrosion and explosion.

●

Replace only with the same or equivalent type.

●

Do not mix old and new batteries.

●

Do not mix different battery types (such as alkaline and manganese batteries).

●

Do not use rechargeable batteries (Ni-Cd, etc.).

●

Do not burn or break up batteries.

●

Do not expose batteries to excessive heat such as sunshine, fire or the like.

●

Make sure you dispose of batteries correctly.

●

Remove the battery from the unit when not using for a prolonged period of time to prevent battery leakage, corrosion and explosion.

LCD Television

Declaration of Conformity (DoC)

“Hereby, Panasonic Corporation declares that this TV is in compliance with the essential requirements and other relevant provisions of the Directive 1999/5/EC.”

If you want to get a copy of the original DoC of this TV, please visit the following website:

English

)

http://www.doc.panasonic.de

Authorized Representative: Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, Germany

This TV is intended to be used in the following countries. Albania, Andorra, Austria, Belgium, Bulgaria, Croatia,

Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Italy, Iceland, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Monaco, Montenegro, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey

The wireless LAN feature of this TV shall exclusively be used inside buildings.

Accessories

Remote Control

(p. 12)

●

N2QAYB000830

TX-32AS600Y TX-39AS600Y TX-42AS600Y

(

TX-50AS600Y

●

N2QAYB000840

TX-32AS600YW TX-39AS600YW

(

TX-42AS600YW

Pedestal

(p. 7)

32-inch model

39-inch model 42-inch model

50-inch model

English

Mains lead

(p. 9)

Batteries (2)

●

(p. 13)

Operating Instructions Pan European Guarantee Card

●

Accessories may not be placed all together. Take care not to throw them away unintentionally.

●

For the information of optional accessories, refer to [eHELP] (Support > Optional accessories).

Assembling / Removing the pedestal

32-inch model

Assembly screw (3)

Assembly screw (4)

Bracket

M4 × 15

39-inch model 42-inch model 50-inch model

Assembly screw (4)

Bracket (2)

M5 × 15

M4 × 12

Base

■ Assembling the pedestal

Base

■ Assembling the pedestal

English

Connections

●

External equipment and cables shown are not supplied with this TV.

●

Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any cables.

●

Check the terminal type and cable plugs are correct when connecting.

●

Use a fully wired HDMI compliant cable.

●

Use a fully wired SCART cable.

●

Keep the TV away from electronic equipment (video equipment, etc.) or equipment with an infrared sensor, otherwise distortion of image / sound may occur or operation of other equipment may be affected.

●

Please also read the manual of the equipment being connected.

Terminals

Removing the pedestal from the TV

Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.

1 Remove the assembly screws 2 Pull out the pedestal from the TV. 3 Remove the assembly screws

from the TV.

from the bracket.

1 CI slot (p. 10) 2 USB 1 - 2 port 3 Headphone jack 4 HDMI1 - 3 5 Terrestrial / cable terminal

(p. 10)

(p. 9, 10)

(p. 9)

English

6 AV2 (COMPONENT / VIDEO) 7 ETHERNET 8 DIGITAL AUDIO 9 AV1 (SCART)

(p. 10)

(p. 9)

Basic connections

■ Mains lead

(p. 10)

AV devices

■ DVD Recorder / VCR

AC 220-240 V 50 / 60 Hz

Mains lead (supplied)

Insert the mains plug firmly into place.

32-inch model

●

When disconnecting the mains lead, be absolutely sure to disconnect the mains plug at the socket outlet first.

39-inch model

42-inch model

50-inch model

■ Aerial

RF cable

Terrestrial aerial

●

For DVB-C, DVB-T, Analogue

Cable

SCART cable

RF cable DVD Recorder / VCR Terrestrial aerial

■ DVD Recorder (VCR) / Set top box

Cable

SCART cable

RF cable HDMI cable Satellite dish Terrestrial aerial DVD Recorder / VCR Set top box

English

Network

To use internet service, you need a broadband network environment.

●

If you do not have any broadband network services, please consult your retailer for assistance.

●

Prepare the internet environment for wired connection or wireless connection.

●

Setup of the network connection will start when first using the TV. (p. 14)

■ Wired connection

■ Camcorder / Game equipment

(VIDEO equipment)

(Viewing)

Internet environment

LAN cable (Shielded)

●

Use the Shielded Twist Pair (STP) LAN cable.

■ Wireless connection

Built-in wireless LAN

Access point

Other connections

■ DVD Player

(COMPONENT equipment)

(Viewing)

DVD Player

(Listening)

Internet

environment

(Listening)

Game equipment Camcorder

■ Amplifier (to listen with speakers)

●

Use HDMI2 for connecting an amplifier. This connection is applicable when using an amplifier that has ARC (Audio Return Channel) function.

As for an amplifier without ARC function, use DIGITAL AUDIO.

●

To enjoy multi-channel sound from external equipment (e.g. Dolby Digital 5.1ch), connect the equipment to the amplifier. For the connections, read the manuals of the equipment and amplifier.

HDMI cable

Amplifier with speaker system External equipment (DVD Player, etc.)

■ Headphones

●

To adjust volume

[Headphone Volume] in the Sound Menu

English

(M3 stereo mini plug)

■ Common Interface

●

Turn the TV off with Mains Power On / Off switch whenever inserting or removing the CI module.

●

If a smart card and a CI module come as a set, first insert the CI module, then insert the smart card into the CI module.

●

Insert or remove the CI module completely in the correct direction as shown.

●

Normally encrypted channels will appear. (The viewable channels and its features depend on the CI module.)

If encrypted channels do not appear

[Common Interface] in the Setup Menu

●

There might be some CI modules in the market with older firmware versions that do not work fully interoperable with this new CI+ v1.3 TV. In this case, please contact your content provider.

●

For more information, refer to [eHELP] (Functions > Common Interface), read the manual of the CI module, or check with the content provider.

CI module

■ Communication Camera

●

Use USB 1 for connecting the Communication Camera.

●

For more information, refer to [eHELP] (Support > Optional accessories > Communication Camera).

■ VIERA Link

●

Use HDMI1 - 3 for VIERA Link connection.

●

For more information, refer to [eHELP] (Functions > VIERA Link “HDAVI Control™”).

English

Identifying Controls

Remote Control

1 Standby On / Off switch 2 Off Timer

●

Sets the time for the TV to automatically turn off.

3 [Main Menu]

●

Press to access Picture, Sound, Network, Timer, Setup and Help Menus.

4 Teletext button 5 Information

●

Displays channel and programme information.

6 APPS

●

Displays [APPS List] (applications list).

7 OK

●

Confirms selections and choices.

●

Press after selecting channel positions to quickly change channel.

●

Displays channel list.

8 [Option Menu]

●

Easy optional setting for viewing, sound, etc.

9 Coloured buttons

(red-green-yellow-blue)

●

Used for the selection, navigation and operation of various functions.

Volume Up / Down

Numeric buttons

●

Changes channel and teletext pages.

●

Sets characters.

●

When in Standby mode, switches TV on.

[eHELP]

●

Displays [eHELP] (Built-in Operating Instructions).

Input mode selection

●

TV - switches to DVB-C / DVB-T / Analogue.

●

AV - switches to AV input mode from Input Selection list.

Aspect

●

Changes aspect ratio.

Subtitles

●

Displays subtitles.

Exit

●

Returns to [Home Screen].

HOME

●

Displays [Home Screen].

TV Guide

●

Displays Electronic Programme Guide.

Cursor buttons

●

Makes selections and adjustments.

Return

●

Returns to the previous menu / page.

Channel Up / Down

Sound Mute On / Off

Last view

●

Switches to previously viewed channel or input mode.

Operations for contents, connected equipment,

etc.

English

■ Installing / Removing batteries

Pull open

●

The LED blinks when the TV receives a command from the remote control.

Hook

Note the correct

polarity (+ or -)

Indicator / Control panel

●

When pressing 1, 2, 3 buttons, the control panel guide appears on the right side of the screen for 3 seconds to highlight the pressed button.

Rear side of the TV

1 Input mode selection

●

Press repeatedly until you reach the desired mode.

[Main Menu]

●

Press and hold for about 3 seconds to display main menu.

OK (when in the menu system)

2 Channel Up / Down

Cursor Up / Down (when in the menu system)

3 Volume Up / Down

Cursor Left / Right (when in the menu system)

4 Mains power On / Off switch

●

Use to switch the mains power.

5 Remote control signal receiver

●

Do not place any objects between the TV remote control signal receiver and remote control.

6 Ambient sensor

●

Senses brightness to adjust picture quality when [Ambient Sensor] in the Picture Menu is set to [On].

7 Power LED

Red: Standby Green: On

567

English

First time Auto Setup

Automatically sets up the TV and searches for available TV channels when the TV is turned on for the first time.

●

These steps are not necessary if the setup has been completed by your local dealer.

●

Please complete connections (p. 8 - 11) and settings (if necessary) of the connected equipment before starting Auto Setup. For details of settings for the connected equipment, read the manual of the equipment.

1 Plug the TV into mains socket and

turn power on

●

Takes a few seconds to be displayed.

2 Select the following items

Set up each item by following the on-screen instructions.

Example:

Please select your viewing environment.

Home Shop

Tick the TV signal mode to tune, and then select [Start Auto Setup]

: tune (search for the available channels) : skip tuning

●

Auto Setup screen varies depending on the country and the signal mode you select.

●

[DVB-C Network Settings] Normally set [Frequency] and [Network ID] to [Auto]. If [Auto] is not displayed or if necessary, enter

[Frequency] and [Network ID] specified by your cable provider with numeric buttons.

3 Select the type of [Home Screen]

The demonstration to explain how to use [my Home Screen] is displayed. Confirm the demonstration by following the on-screen instructions, and then select the desired [Home Screen].

Example: [Home Screen Selection]

Example: [TV Home Screen]

■ How to use remote control

Select the language Select [Home]

Select [Home] viewing environment to use in your home environment.

●

Set up the network connection Select your country

●

English

Move the cursor

Access the item / store the setting

Return to the previous item (if available)

[Shop] is for shop display. To change viewing environment later on, you will

need to initialise all settings by accessing Shipping Condition.

Depending on the country you select, select your Region or store the Child Lock-PIN number (“0000” cannot be stored).

Auto Setup is now complete and your TV is ready for viewing.

If tuning has failed, check the connection of the network, RF cable, and then follow the on-screen instructions.

Note

●

The TV will automatically go into Standby mode when no operation is performed for 4 hours if [Auto Standby] in the Timer Menu is set to [On].

●

The TV will automatically go into Standby mode when no signal is received and no operation is performed for 10 minutes if [No signal Power off] in the Timer Menu is set to [On].

●

To retune all channels

[Auto Setup] in [Tuning Menu] (Setup Menu)

●

To add the available TV signal mode later

[Add TV Signal] in [Tuning Menu] (Setup Menu)

●

To initialise all settings

[Shipping Condition] in [System Menu] (Setup

Menu)

Operations

Turn power on

(TV) or

(Remote Control)

●

Mains power On / Off switch should be on. (p. 13)

The last viewed [Home Screen] is displayed.

Example: [TV Home Screen]

●

The selectable modes vary depending on the channels stored.

select

●

You can also select the mode pressing the TV button repeatedly.

●

If [TV Selection] is not displayed, press the TV button to switch the mode.

access

3 Select a channel

down

●

To select a channel position with 2 or more-digit, e.g. 399

Example: Selected content screen

●

To return to [Home Screen] at any time

●

You can set up or make [Home Screen] to display desired information, to access specific features easily, to select the default [Home Screen], etc. For details, follow the on-screen instructions or refer to [eHELP] (my Home Screen > my Home Screen).

Watching TV

1 Select the TV viewer from [Home

Screen]

select

access

2 Select the mode

TV Selection DVB-C DVB-T Analogue

To access each feature

Access [APPS List] and select a feature

Example: [APPS List]

APPS is the applications (features) of the TV.

●

For operations of each feature and the setup of [APPS List], follow the on-screen instructions or refer to [eHELP] (my Home Screen > APPS List).

English

How to Use eHELP

[eHELP] is the detailed operating instructions built into the TV, and helps you to get more understanding of the operations for each feature.

1 Display [eHELP]

●

If this is not the first time to view [eHELP] from when the TV is turned on, the confirmation screen is displayed to select whether [First Page] or [Last Page].

[Help]

2 Select the category and item

[eHELP]

Category field

Item field

Sub item field

Description

●

To return to the previous field

●

To scroll the description (if more than 1 page) While the description is highlighted

●

To display the menu related to the description (only for some descriptions)

(red)

select

category

access

select item

access

select sub

item

access

English

FAQs

Before requesting service or assistance, please follow these simple guides to solve the problem.

●

For more information, refer to [eHELP] (Support > FAQs).

The TV does not switch on

●

Check the mains lead is plugged into the TV and the socket outlet.

The TV goes into Standby mode

●

Auto power standby function is activated.

The remote control does not work or is intermittent

●

Are the batteries installed correctly? (p. 13)

●

Has the TV been switched on?

●

The batteries may be running low. Replace them with new ones.

●

Point the remote control directly at the TV’s remote control signal receiver (within about 7 m and a 30 degree angle of the signal receiver).

●

Situate the TV away from sunshine or other sources of bright light not to shine on the TV’s remote control signal receiver.

No image can be displayed

●

Check the TV is turned on.

●

Check the mains lead is plugged into the TV and the socket outlet.

●

Check the correct input mode is selected.

●

Check the setting of [AV2] ([COMPONENT] / [VIDEO]) in [Input Selection] to match the output of the external equipment.

●

Is [Contrast], [Brightness] or [Colour] in the Picture Menu set to the minimum?

●

Check all required cables and connections are firmly in place.

Unusual image is displayed

●

Turn the TV off with Mains power On / Off switch, then turn it on again.

●

If the problem persists, initialise all settings.

[Shipping Condition] in [System Menu] (Setup

Menu)

Parts of the TV become hot

●

Even if the temperature of parts of the front, top and rear panels has risen, these temperature rises do not cause any problems in terms of performance or quality.

The LCD panel moves slightly and clattered sound is heard when it is pushed with a finger

●

There is a little gap around the panel to prevent

damage to the panel. This is not a malfunction.

English

Maintenance

Specifications

First, remove the mains plug from the socket outlet.

Display panel, Cabinet, Pedestal

Regular care:

Gently wipe the surface of the display panel, cabinet, or pedestal by using a soft cloth to clean the dirt or fingerprints.

For stubborn dirt:

(1) First clean the dust on the surface. (2) Dampen a soft cloth with clean water or diluted

neutral detergent (1 part detergent to 100 parts water).

(3) Wring the cloth firmly. (Please note liquids do not

enter the TV inside. May lead to product failure.)

(4) Finally, wipe away all the moisture.

Caution

●

Do not use a hard cloth or rub the surface too hard, otherwise this may cause scratches on the surface.

●

Take care not to subject the surfaces to insect repellent, solvent, thinner or other volatile substances. This may degrade surface quality or cause peeling of the paint.

●

The surface of the display panel is specially treated and may be easily damaged. Take care not to tap or scratch the surface with your fingernail or other hard objects.

●

Do not allow the cabinet and pedestal to make contact with a rubber or PVC substance for a long time. This may degrade surface quality.

Mains plug

Wipe the mains plug with a dry cloth at regular intervals. Moisture and dust may cause fire or electrical shock.

■ TV

Model No.

32-inch model

39-inch model

42-inch model

50-inch model

Dimensions (W × H × D)

32-inch model

733 mm × 505 mm × 184 mm (With Pedestal) 733 mm × 436 mm × 59 mm (TV only)

39-inch model

886 mm × 560 mm × 247 mm (With Pedestal) 886 mm × 516 mm × 53 mm (TV only)

42-inch model

947 mm × 597 mm × 247 mm (With Pedestal) 947 mm × 552 mm × 53 mm (TV only)

50-inch model

1 126 mm × 697 mm × 260 mm (With Pedestal) 1 126 mm × 652 mm × 53 mm (TV only)

Mass

32-inch model

7.0 Net (With Pedestal)

6.5

39-inch model

11.0 Net (With Pedestal)

10.0

42-inch model

13.0 Net (With Pedestal)

12.0

50-inch model

16.0 Net (With Pedestal)

15.0

Power source

AC 220-240 V, 50 / 60 Hz

Panel

LED LCD panel

Sound

Speaker output

20 W (10 W + 10 W)

Headphones

M3 (3.5 mm) stereo mini Jack × 1

TX-32AS600Y, TX-32AS600YW

TX-39AS600Y, TX-39AS600YW

TX-42AS600Y, TX-42AS600YW

TX-50AS600Y

Net (TV only)

English

Connection terminals

AV1 input / output

SCART (Audio/Video in, Audio/Video out, RGB in)

AV2 input (COMPONENT / VIDEO)

VIDEO

RCA PIN Type × 1

1.0 V[p-p] (75 Ω)

AUDIO L - R

RCA PIN Type × 2

0.5 V[rms]

1.0 V[p-p] (including synchronisation)

B, PR

±0.35 V[p-p]

HDMI 1 / 2 / 3 input

TYPE A Connectors HDMI1 / 3: Content Type HDMI2: Content Type, Audio Return Channel

●

This TV supports “HDAVI Control 5” function.

Card slot

Common Interface slot (complies with CI Plus) × 1

ETHERNET

RJ45, IEEE802.3 10BASE-T / 100BASE-TX

USB 1 / 2

DC 5 V, Max. 500 mA [Hi-Speed USB (USB 2.0)]

DIGITAL AUDIO output

PCM / Dolby Digital / DTS, Fibre optic

Receiving systems / Band name

Check the latest information on the available services at the following website. (English only)

http://panasonic.net/viera/support

DVB-C

Digital cable services (MPEG2 and MPEG4AVC(H.264))

DVB-T / T2

Digital terrestrial services (MPEG2 and MPEG4AVC(H.264))

PAL B, G, H, I SECAM B, G SECAM L, L’

VHF E2 - E12 VHF A - H (ITALY)

CATV (S01 - S05) CATV S11 - S20 (U1 - U10) VHF H1 - H2 (ITALY) UHF E21 - E69 CATV S1 - S10 (M1 - M10) CATV S21 - S41 (Hyperband)

PAL D, K SECAM D, K

VHF R1 - R2 VHF R3 - R5 VHF R6 - R12 UHF E21 - E69

PAL 525/60

Playback of NTSC tape from some PAL Video recorders (VCR)

M.NTSC

Playback from M.NTSC Video recorders (VCR)

NTSC (AV input only)

Playback from NTSC Video recorders (VCR)

Aerial input

VHF / UHF

Operating conditions

Temperature

0 °C - 35 °C

Humidity

20 % - 80 % RH (non-condensing)

Built-in wireless LAN

Standard compliance and Frequency range

IEEE802.11a/n

5.180 GHz - 5.320 GHz, 5.500 GHz - 5.580 GHz,

5.660 GHz - 5.700 GHz IEEE802.11b/g/n

2.412 GHz - 2.472 GHz

Security

WPA2-PSK (TKIP/AES) WPA-PSK (TKIP/AES) WEP (64 bit/128 bit)

The frequency and channel differ depending on the country.

Note

●

Design and Specifications are subject to change without notice. Mass and Dimensions shown are approximate.

●

For the information of power consumption, display resolution, etc., please refer to Product fiche.

●

For the information of the open source software, refer

English

to [eHELP] (Support > Licence).

●

This equipment complies with the EMC standards listed below.

EN55013, EN61000-3-2, EN61000-3-3, EN55020, EN55022, EN55024

■ When using the wall-hanging bracket

●

Please contact your local Panasonic dealer to purchase the recommended wall-hanging bracket.

●

Holes for wall-hanging bracket installation

32-inch model

Rear of the TV

200 mm

(View from the side)

Depth of screw

minimum: 7 mm maximum: 12 mm

Diameter: M4

Screw for fixing the TV onto the wall-hanging bracket (not supplied with the TV)

39-inch model 42-inch model 50-inch model

Rear of the TV

(View from the side)

Depth of screw

39-inch model 42-inch model

minimum: 10 mm maximum: 27 mm

50-inch model

minimum: 10 mm maximum: 28 mm

Diameter: M6

Screw for fixing the TV onto the wall-hanging bracket (not supplied with the TV)

39-inch model

42-inch model

a: 200 mm b: 200 mm

50-inch model

a: 400 mm b: 200 mm

English

+ 47 hidden pages