Panasonic TX-26LXD50, TX-32LXD50 User Manual

MODE

OK

123

456

789

C

0

PULL

N

IDTV

Digital Progressive LCD TV

Operating Instructions

Model No.

TX-26LXD50
TX-32LXD50

The image shown is for illustration only.

(U.K. Standard)

Please read these instructions before operating your set and retain them for future reference.

English

TQB0E0119-2

Welcome

Dear Panasonic Customer,
We hope that you have many years of enjoyment from your new TV. The Quick Start Guide section at the beginning
of this instruction book will allow you to use the TV as quickly as possible. We recommend that you then read the
complete instruction book, and keep it to refer to as you explore the range of advanced features that this LCD TV
offers.

Analogue and Digital television – what are they?

Analogue transmission is the system that has been used for many years for broadcasting television programmes.
With continuous improvements in technology it is now possible to transmit programmes in a digital format, allowing
clearer pictures, more stations and other services to be displayed on screen. Digital television is provided in three
different ways; it can be sent along a cable connection direct to your house, broadcast from a satellite, or broadcast
using traditional land based (terrestrial) transmitters. The first two options require you to have an extra “set top box”
decoder and in the case of satellite, a receiving dish mounted outdoors. While allowing you to receive traditional
analogue transmissions in the usual way, this television can also receive terrestrial digital services using an integrated

(Digital Video Broadcasting) decoder. This allows you to enjoy the new era of digital terrestrial television, including
interactive services, without the need for a “set top box” or satellite dish – an adequate roof or loft mounted antenna
is all you need.

DVB is a trademark of the DVB Digital Video Broadcasting Project (1991 to 1996).

Contents

Warnings and Precautions ........................................ 3

Accessories ............................................................... 4

Fitting remote control batteries ................................. 4

Cable cover removal and fitting ................................ 5

How to open the front cover ...................................... 5

How to use the LCD stand ........................................ 5

Quick Start Guide ...................................................... 6

Basic controls: front panel and remote control .......... 9

Using the On Screen Displays ................................ 10

Picture menu ............................................................11

Sound menu ............................................................ 12

Setup menu ............................................................. 13

Tuning menu – overview ......................................... 14

Tuning menu – Programme edit.............................. 15

Adding / deleting a programme channel .............. 15

Moving a programme channel ............................. 15

Renaming a programme channel ........................ 16

Locking a programme channel ............................ 16

Copying programme information to

a recording device .................................... 16

Tuning menu – Auto setup ...................................... 17

Tuning menu – Manual tuning................................. 18

Manual tuning (via front panel) .............................. 18

Owner ID ................................................................. 19

Shipping condition ................................................... 20

DVB Setup Menu – overview .................................. 21

Timer programming menu ....................................... 22

Profile Edit menu ..................................................... 24

Child Lock menu ..................................................... 25

DVB Tuning Menu ................................................... 26

DVB System Setup ................................................. 27

Common Interface Module menu ............................ 28

System Update menu ............................................. 29

TV Guide - Electronic Programme Guide (EPG) .... 30

Information banner .................................................. 31

Subtitles ON / OFF .................................................. 31

Q-Link...................................................................... 32

Aspect Controls ....................................................... 33

Still .......................................................................... 34

VCR / DVD operation .............................................. 35

Teletext operation.................................................... 36

Audio / video connections ....................................... 39

How to connect the Headphones / AV3 terminals 39

How to connect the Audio Output terminals ........ 40

How to connect the AV1 / 2 / 4 Scart terminals.... 40

How to connect the Component Input terminals .. 40

Troubleshooting ...................................................... 41

Maintenance ........................................................... 42

Scart and S-video terminal information ................... 42

Component signal that can be displayed ................ 42

Specifications .......................................................... 43

2

Warnings and Precautions

• This TV set is designed to operate on AC 220-240 V, 50 /
60 Hz.

•To prevent damage which might result in electric shock
or fire, do not expose this TV set to rain or excessive
moisture. This TV must not be exposed to dripping or
splashing water and objects filled with liquid, such as
vases, must not be placed on top of or above the TV.

• Keep unneeded small parts and other objects out of the
reach of small children. These objects can be accidentally
swallowed. Also, be careful about packaging materials
and plastic sheets.

• WARNING : HIGH VOLTAGE!!!
Do not remove the rear cover as live parts are accessible
when it is removed. There are no user serviceable parts
inside.
Ensure that the mains plug is easily accessible.

• TV Games / Home Computers
Extended use of TV games or home computers with any
television set can cause a ‘shadow’ on the screen. This
type of LCD panel phenomenon, can be limited by
observing the following points:

• Reduce the brightness and contrast levels to a minimum viewing

level.

• Do not allow a still picture to be displayed for an extended period,

as this can cause a permanent after-image to remain on the
LCD TV screen.

•

Examples of still pictures include logos, video games, computer
images, teletext and images displayed in 4:3 mode.

•

This type of LCD panel damage, is not an operating defect, and
as such is not covered by the Panasonic warranty.

• The On / Off switch on this model does not fully disconnect
the TV from the mains supply. Remove the mains plug
from the wall socket before connecting or disconnecting
any leads, or if the TV set is not used for a prolonged
period of time.

Note:

If the set is not switched off when the TV station stops
transmitting, it will automatically go to Standby mode after
30 minutes. This function will not operate when the TV is in
AV mode.

• Cabinet and LCD panel care
Remove the mains plug from the wall socket. The cabinet
and LCD panel can be cleaned with a soft cloth moistened
with mild detergent and water. Do not use solutions
containing benzol or petroleum.

• When ambient temperature is cool, the picture may take
a short time to reach normal brightness, but this is not a
malfunction. (After brief moment, the picture will have
normal brightness.)

•

Adequate ventilation is essential to prevent failure of
electrical components, we recommend that a gap of at least
10 cm is left all around this television receiver even when
it is placed inside a cabinet or between shelves.

•Avoid exposing the TV set to direct sunlight and other
sources of heat. To prevent fire, never place any type of
candle or naked flame on top or near the TV set.

•Ventilation should not be impleded by covering the
ventilation openings with items such as newspapers, table
cloths and curtains.

FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY

This appliance is supplied with a fitted three pin mains plug for your safety and convenience. A 5 amp fuse is fitted in
this plug. If the fuse is replaced then the replacement fuse must be 5 amp rated and should be approved by ASTA or
BSI to BS1362.
Check for the ASTA mark
If the fitted plug has a removable fuse cover you must ensure that it is refitted when the fuse is replaced. If you lose the
fuse cover the plug must not be used until a replacement cover is obtained. Replacement fuse covers can be purchased
through your local Panasonic dealer.

The plug fitted to this appliance incorporates a mains filter circuit. If this is removed or replaced
with a non– filtered plug this television will no longer meet the European standards for
Electromagnetic Compatibility (EMC). If the fitted plug is unsuitable for the socket outlet in
your home an appropriate adapter should be used.

Nonetheless, if the fitted plug is replaced, the fuse should be taken out and the cut- off plug
disposed of safely. There is danger of severe electrical shock if the cut off plug is inserted
into any 13 amp socket.

If a new plug is to be fitted please observe the wiring code as shown below.
If in any doubt please consult a qualified electrician.

How to replace the fuse (for plug type shown in example 1):

Lift out the removable fuse compartment with a screwdriver and replace the fuse, then refit securely
into the mains plug (see example 1).

How to replace the fuse (for plug type shown in example 2):

Lift open the fuse compartment, in the mains plug, with a screwdriver, and replace the fuse, then press the fuse cover
down securely (see example 2).

IMPORTANT : – The wires in the mains lead of this appliance are coloured in accordance with the following code :–

BLUE : NEUTRAL BROWN : LIVE

As the colours of the wires in the mains lead of this appliance may not correspond to the markings identifying the terminals
in your plug, proceed as follows :–

1. The BLUE wire must be connected to the terminal marked ‘N’ or coloured black.

2. The BROWN wire must be connected to the terminal marked ‘L’ or coloured red.

IMPORTANT NOTE : Under no circumstances should either of these wires be connected to the Earth terminal of the three

ASA

or the BSI mark on the body of the fuse.

pin plug, marked with the letter ‘E’ or the earth symbol .

Example 1

Example 2

3

Accessories

Check that you have the accessories and items shown

Operating Instructions

Clamper
(TMME203)

Remote Control Transmitter
(EUR7651080)

MODE

OK

123

456

789

C

0

N

IDTV

Pan European Guarantee Card

Batteries for the Remote
Control Transmitter
(2 × R6 (UM3) size)

1 Year Guarantee Registration

Fitting remote control batteries

1 2 3

+

­+

-

“R6 (UM3)” size

Pull and hold the hook, then
open the battery cover.

Insert batteries - note correct

-

polarity ( + and

).

• Make sure that the batteries are fitted the correct way round.

• Do not mix old batteries with new batteries. Remove old, exhausted batteries immediately.

• Do not mix different battery types, i.e. Alkaline and Manganese or use rechargeable (Ni - Cad) batteries.

Replace the cover.

4

Cable cover removal and fitting

Removal

1. Push down hooks and pull the cover slightly
towards yourself to disengage the claws (at 3
points).

2. Slowly pull out in the downward direction.

Fitting

1. Insert the claws (at 3 points) at the bottom end.

2. Push until it clicks.

Note:

To avoid interference appearing on the screen, do not bundle the RF cable and mains lead together.

How to open the front cover

PULL

How to use the LCD stand

Adjust the LCD panel to your desired angle.
The LCD panel can be swiveled the following direction:

20 ° Right
20 ° Left

PULL

Raise the lower part of the door
labeled “PULL”.

(View from the top)

5

Quick Start Guide

Connection and setting up options

Note: Please ensure that the unit is disconnected from the mains

before attaching or disconnecting any leads.

AV1 AV2 AV4

COMPONENT

Scart cables

Y

(Not supplied)

B

P

P

R

AUDIO

L

R

RGB
VIDEO

VIDEO
S-VIDEO

RGB
VIDEO
S-VIDEO

VIDEO

RF cable
(Not supplied)

Satellite Receiver

RF cable (Not supplied)

VCR / DVD Recorder

Scart Connections

• The VCR / DVD Recorder can be connected to the TV using a Scart cable, if you are using a Scart equipped VCR
/ DVD Recorder.

• Use the TV’s any Scart terminal for any VCR. Always use a “fully wired” Scart cable.

• Use the TV’s AV1 or AV4 Scart terminal for any DVD Recorder. Always use a “fully wired” Scart cable.

• Use the TV’s AV1 or AV4 Scart terminal for Satellite Receiver. Always use a “fully wired” Scart cable.

RF Connection

• Connect the RF cable to the “Aerial In” terminal of the VCR / DVD Recorder and an RF cable from the VCR / DVD

OR

Recorder “Aerial Out” terminal to the TV Aerial terminal (

).

Notes:

• If using a “Q-Link” VCR / DVD Recorder, then the AV1 Scart of the VCR / DVD Recorder must be connected to the
AV2 or AV4 terminal of the TV. If your VCR or DVD Recorder is not a “Q-Link” device, please consult the operating
instruction book for that product. Further information on Q-Link can be found on page 32.

• Further details of Audio / Video connections can be found on page 39, 40.

• Additional equipment and cables are not supplied.

6

Quick Start Guide

Connect the mains plug to the wall socket.

1

Press the [

]switch on the TV set to turn

MODE

OK

the set on.

To switch the TV set to Standby mode, press
the

button on the remote control.

The TV set can be switched on by pressing

button again if it was in Standby mode.

the

PULL

123

456

789

C

0

Note:

This TV will still consume some power even

N

in the Off mode, as long as the mains plug is
still connected to a live mains socket.

Power Indicator

Remote control signal sensor

C.A.T.S. sensor

LCD C.A.T.S. (Contrast Automatic Tracking
System) automatically senses the ambient light
conditions and adjusts the brightness and
gradation accordingly, to optimize contrast.
C.A.T.S. is in effect when Viewing mode is set
to Auto. See page 11.

Programmes will appear immediately if your dealer has programmed

2

the TV for you.
If the TV has not been programmed for you then Auto setup will begin.
The TV will search for DVB stations and Analogue stations:
TV stations will be located, sorted into order and stored ready for use.
Stations are sorted into the following order:

• DVB Stations: Are sorted by their logical channel number sent by

the broadcasters, which can be made the favourites list by Profile
Edit. See page 24.

• Analogue Stations: Are sorted into channel order, but can be

changed to your preference. See page 15.

DVB Indicator

DVB system active during Timer

recording or Direct TV Recording

Standby for Timer Recording : Orange

Standby : Red

On : No Light

: Orange (flash)

Otherwise : No Light

DVB Aute Setup

Please Wait !

Prog. Channel Service Name NetID. TS ID. Quality

4

30

5

6

7

8

This will take about 3 mins.

CH44

BBC NEWS 24

30

BBCI

30

CBBC Channel

30

BBC Radio Wales

30

BBC Radio Cymru

Exit

AUTO SETUP IN PROGRESS
SEARCHING : PLEASE WAIT

12302

12302

12302

12302

12302

4158

4158

4158

4158

4158

In this setup, usually Analogue auto setup screen may not be
displayed. The sorted programme order depends upon the TV signal,

21 68

the broadcasting system, and reception conditions.

TV to VCR or DVD Recorder Download

3

Exit

If a “Q-Link”, “NEXTVIEWLINK” or compatible recording device has
been connected to a Scart terminal (AV2 or AV4) before starting Step
1, programme information will be downloaded to that device.
Only the analogue programme positions will be downloaded to the
recording device, in the same order as stored in the TV. See page 32.

DOWNLOAD IN PROGRESS

PLEASE WAIT

Programme : 63

Remote control unavailable

Not all VCRs / DVD Recorders support this download of programme
information, some may require to be started manually.
Refer to the recording device’s operating instruction book.
If a recording device other than those described above has been connected, then there will be no download operation.

68 21

9

9

9

9

9

Notes:

• If the recording device has not accepted download data from the TV, you may need to select the Download
option from the device’s menu system. Refer to the recording device’s operating instruction book.

• If Q-Link is not operating correctly, check the following :
The Scart cable is connected to the TV’s Scart terminal, AV2 or AV4, and correctly setup in the menu.
The Scart cable is connected to the recording device’s compatible (Q-Link, NEXTVIEWLINK or similar
technology) Scart terminal.
The Scart cable is a “fully wired” type.

• For further information on Q-Link and connecting equipment, see page 32, 40, 42.

7

Quick Start Guide

Owner ID

4

As an added feature, this TV has the option of adding a security
code (Owner ID) and personal details into its memory, so that in the
unfortunate event of theft it will help the Police to trace the owner.

Using the numeric buttons to enter required 4 digit Owner ID PIN
NUMBER.
If a 4 digit PIN NUMBER was entered, you will be taken automatically
to the NAME line.

If not, using the left or right cursor buttons move to the NAME line.

123

456

789

0

VCR

MODE

OK

123

456

789

C

0

Change character using the up or down cursor buttons.

Select the character position using the left or right cursor buttons.

Repeat above until NAME, HOUSE NUMBER and POSTCODE
are entered.

Press the OK button to store the details.
Press the OK button again, when you are asked “Are you sure ? ”.

For further information on Owner I.D., see page 19.

A space is provided on page 19 to write down the PIN NUMBER
for future reference.

Your LCD TV is now ready for use.

To view a list of the stations that have been found, press the GUIDE button.

5

Use the cursor buttons to move the cursor bar.

Use the programme change button to step through the guide page
by page.

To view the selected programme, move the cursor to the channel
and then press the OK button.

The guide can be cleared from the screen using the EXIT button.

OK

Owner ID

PIN NUMBER :

HOUSE NO :

POSTCODE :

GUIDE

OK

EXIT

Yo u now have the opportunity
to enter your details and
help the police crack crime
see instruction book

∗ ∗ ∗ ∗

NAME :

∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗

0123456789

∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗

Change character
Select character
Store Owner ID
Exit

123

456

789

C

N

IDTV

MODE

OK

0

DVB TV Guide (DVB mode) See page 30.
To make stations easier to find, specific stations can be listed by
category; press the Yellow button to show a category.
The chosen category name is shown on screen.
For example, if you select Free TV and press the OK button, only
‘free-to-air’ stations will be listed – you can view any of these now.

If you select Pay TV and press the OK button, only subscription
stations will be listed – you will need to contact the service provider
to find out how to subscribe to these stations.

Analogue mode

Analogue Programme Guide

Prog. Name Chan.

VCR :

1 :
2 :
3 :
4 :
5 :
6 :
7 :
8 :

9 :
10 :
11 :
12 :

BBC1
BBC2
ITV
S4C

CH21
CH44
CH51
CH41
CH47
CH23
CH26
CH58

-

-

-

-

-

13 :
14 :
15 :
16 :
17 :
18 :
19 :
20 :
21 :
22 :
23 :
24 :

DVB mode

DVB TV Guide

Fri 6th

20:00-21:00

1

2

21

44

122

142

144

:Landscape

All Services

Coronation Steet:We open in the Battersdy’s

Time: 19:30 20:00

BBC1

Eastender

BBC2

Hot Wars

ITV1

Emmerdal.

Channel4

10 O’ clock News BBC

five

Panoroma

ITV2

I’m A Celebrlty

SC4

Rugby

Change display mode
Select channel

Select Programme

Timer Programming
Exit

-24 Hr +24 Hr

All Services

DIY SOS

Coronation Street

Sex And The City

15 To1

Category

Category

Prog. Name Chan.

20:30 21:00 21:30

The Bill

Hollday Program

Pepsi Char.

Pop Idol

Info

Category Prog. type

-

-

-

-

-

-

-

-

-

-

-

-

Thu 05/08/04 18:50

Prog. type

All Types

Red Cap

The Bill

Good bye

Term inato r

News

The Bill

Page up

Page dow n

So

Hell

The

8

Basic controls: front panel and remote control

On / Off switch

STR

Used to store tuning in
analogue mode.

F (Function select)
Press repeatedly to select from the available
functions through the On Screen Display:

- Volume, Contrast, Brightness, Colour,

Sharpness, Tint (in NTSC mode), Bass,
Treble, Balance and Manual Tuning (analogue

mode only - see page 18).

Headphones jack

(see page 39)

AV3 terminals

(see page 39)

TV/AV button (see page 39)

Press either button to change TV programme up or down.
Also used for changing various settings in conjunction with
the F button.
Press either button to switch the TV On from Standby mode.

Standby On / Off button
Switches TV On or Off (Standby mode).

GUIDE button
Displays the DVB and Analogue TV
Guide. (see page 30).

Menu button
Press to access the Picture, Sound and
Setup menus. (see page 10-13)

Press to select a function or store a setting.
Press after selecting programme positions
to quickly change programme.

Coloured buttons used for the selection,
navigation and operation of various
functions.

Teletext button (see page 36-38)

STTL button
Text F.P. button (Analogue mode)
Subtitle On/Off (DVB mode)
(see page 31, 37)

Direct channel access
Available in Analogue mode.
During normal TV viewing or when
in the Tuning, Programme edit or
Manual tuning menus, press and then
enter channel number using the numeric
buttons.

Programme up / down button

ASPECT control button
(see page 33, 34)

DVB

Analogue

MODE

OK

MENU

TEXT

STTL INDEX HOLD

123

456

789

C

ASPECT

PROGRAMME

N

REC

0

VCR

VCR DVD

DIRECT
TV REC

TV/AVGUIDE

EXIT

MODE button (see page 12, 13)
Switch between viewing DVB and
Analogue modes.

DIRECT TV Record button
(see page 32)

Switch between viewing TV or AV input.
(see page 39)

Cursor buttons to make selections and
adjustments.

Exit the mode.

Text Hold / Picture Still button
(see page 34, 36)

Text Index button (see page 38)

Programme / channel change buttons (0-

9) and Teletext page buttons.
(see page 36-38)
When in Standby mode, switches TV On.

Status button
Press to display status information for
the current Programme position.
(see page 31)

Volume up / down button

N (Normalize) button
Resets all settings to their default levels.

Sound mute On / Off

VCR / DVD buttons
(see page 35)

IDTV

9

Using the On Screen Displays

Many features available on this TV can be accessed via the On Screen Display menu system. Use the remote
control as shown below to access and adjust features as desired.

The MENU button is used to open the main menus and
also to return to the previous menu.

The up and down cursor buttons are used to move the
cursor and select menus.

The left and right cursor buttons are used to access menus,
adjust levels or to select from a range of options.

The OK button is used with a number of features to store
settings after adjustments have been made or options have
been set.

The EXIT button is used to exit the menu system and return
to the normal viewing screen.

An On Screen Help box is displayed whenever a menu is
displayed on the TV. This Help box indicates which buttons on
the remote control are used to navigate the menu shown, see
above for descriptions of button functions.

Note:

The Help box is not shown in the menu pictures in this
instruction book due to space limitations.

MENU

OK

EXIT

Sound menu

Bass
Treble
Balance
Headphone volume
NICAM
Mode
Ambience

Select
Adjust

Exit
Return

MODE

OK

123

456

789

C

0

N

IDTV

Off
Music
Off

ON SCREEN HELP
‘Instructions’ box

10

Picture menu

Press the MENU button.

Move to Picture menu.

Access Picture menu.

Move to menu option.

Adjust chosen option or access chosen menu.

Press the EXIT button at any time to go back to watching TV.

Viewing mode The Viewing mode menu allows you to select four

different screen settings - Dynamic, Normal, Cinema
and Auto.
In each Viewing mode setting, Contrast, Brightness,
Colour, Sharpness, Tint (in NTSC only), Colour
balance, Colour management, P-NR, MPEG NR and
3D-COMB can be adjusted and stored to suit your
particular viewing requirement. (e.g., you may require
different settings for viewing sports, fi lms, news etc.)
Changes to any settings in a viewing mode will affect
all signal sources: RF, AV1, AV2, AV3, AV4 and
Component. Changes will be stored automatically.
By analysing and processing the incoming picture, all
four modes feature automatic enhancement.

MENU

123

456

789

C

N

EXIT

Main menu

Picture menu

Sound menu

Setup menu

Picture menu

Viewing mode
Contrast
Brightness
Colour
Sharpness
Tint
Colour balance
Colour management
P-NR
MPEG NR
3D-COMB On

MODE

OK

0

Dynamic

Normal
On
Off
Off

Contrast, Brightness, Colour, Sharpness

Increase or decrease the levels of these options
according to your personal preference.

Tint

With an NTSC signal source connected to the TV, the
picture hue can be adjusted to suit your taste.

Colour balance

Allows you to set the overall colour tone of the picture.
Choose from Cool, Normal and Warm.

Colour management

P-NR

Enables vivid colour adjustment automatically.

Automatically reduces unwanted picture noise.
Not available during HD signal input.

MPEG NR

Reduces MPEG noise.
Allows you to choose from Off, Min, Mid and Max.
This function is effective in reducing the digital block noise
when viewing DVD, VCD or digital broad cast ing. The
effect will be changed based on the scene and image.
MPEG: Compression technology of the image signal

adopted by DVD, VCD or digital broadcasting.

3D-COMB

Not available in DVB mode.
Occasionally, whilst viewing still or slow moving
pictures, colour patterning may be seen. Set 3D-COMB
to On to display sharper and more accurate colours.
Displayed only when receiving PAL or NTSC signals.
Not displayed during RGB Video, S-Video and
component input mode.

Picture menu

Viewing mode
Contrast
Brightness
Colour
Sharpness
Tint
Colour balance
Colour management
P-NR
MPEG NR
3D-COMB On

Picture menu

Viewing mode
Contrast
Brightness
Colour
Sharpness
Tint
Colour balance
Colour management
P-NR
MPEG NR
3D-COMB On

Dynamic

Normal
On
Off
Off

Dynamic

Normal
On
Off
Off

11

Sound menu

A

Press the MODE button to select DVB or Analogue mode.

Press the MENU button.

Move to Sound menu.

Access Sound menu.

Move to menu option.

DVB

nalogue
MODE

MENU

MODE

OK

123

456

789

C

0

Adjust chosen option or access chosen menu.

Press the EXIT button at any time to go back to watching TV.

Bass

Increase or decrease level to enhance or minimise
lower, deeper sound output.

Treble

Increase or decrease level to enhance or minimise
sharper, higher sound output.

Balance

The levels of sound between the left and right speakers
can be adjusted to suit your listening position.

Headphone
volume

Can be adjusted independently of the TV speakers so
that everyone can enjoy listening at a level comfortable
for them.

NICAM

Not available in DVB mode.
Select On to provide stereo sound reproduction. Select
Off for FM Mono sound output.
If Nicam Mono is being transmitted select either FM
Mono (Off), Nicam Mono I (M1) or Nicam Mono II (M2).
The options depend upon the signal being transmitted.
If reception deteriorates it is advisable to switch to FM
Mono (Off).

EXIT

Main menu

Picture menu

Analogue mode

Sound menu

Bass
Treble
Balance
Headphone volume
NICAM
Mode
Ambience

N

IDTV

Sound menu

Setup menu

Off
Music
Off

Mode

Ambience

Sound quality can be improved when watching music
scene or drama by selecting the appropriate Music
or Speech mode.

Ambience provides a dynamic enhancer to simulate

DVB mode

Sound menu

Bass
Treble
Balance
Headphone volume
Mode
Ambience

Music
Off

improved spatial effects.

12

Setup menu

A

Press the MODE button to select DVB or Analogue mode.

Press the MENU button.

Move to Setup menu.

DVB

nalogue
MODE

MENU

MODE

OK

Access Setup menu.

Move to menu option.

Adjust chosen option or access chosen menu.

Press the EXIT button at any time to go back to watching TV.

Q-Link

Allows you to select which AV terminal is to be used
for data communication between this TV and a
compatible recording device. Choose from AV2 and

AV4. See page 32.

AV2 / AV4 out

Offers a choice of signals to send to the Scart terminal
selected in the Q-Link option. You can choose from
the current TV (Analogue, DVB) programme position,
the signal entering AV1 / AV2 / AV3 / AV 4 or Monitor

- the picture displayed on screen.
Note: Component signal input cannot be output to

these Scart terminals.

Teletext

Allows you to choose between FASTEXT or List mode.
See page 36-38.

Off timer

Switches the TV off within a preset time which you
can choose from between 0 to 90 minutes in 15 minute
intervals.

Power on
preference

Set to TV to view picture from TV tuner.
Set to AV to view input from an external equipment
connected to a Scart socket, e.g. satellite receiver.

Note:

The external equipment must be switched on and
sending a control signal for automatic switching at power on to occur.

EXIT

Main menu

Picture menu

Sound menu

Setup menu

Analogue TV mode

Setup menu

Q-Link
AV2 out
Teletext
Off timer
Powe r on preference
Tu ning Menu
Owner ID
Shipping condition

DVB mode

Setup menu

Q-Link
AV2 out
Off timer
Powe r on preference
DVB Setup Menu
Owner ID
Shipping condition

AV mode

Setup menu

Q-Link
AV2 out
Teletext
Off timer
Volume correction
Power on preference

123

456

789

C

0

N

AV2

Monitor
FASTEXT
Off
TV

AV2

Monitor
Off
TV

AV2

Monitor
FASTEXT
Off

TV

Tuning Menu

Provides access to many other features including Programme edit and Auto setup. See
page 15-17.

DVB Setup Menu

Owner ID

Shipping condition

Provides access to setup the DVB operations. See page 21.

Allows you to enter a security code and address information. See page 19.

Allows you to clear all tuning information and reset all control levels back to factory settings.
See page 20.

Volume correction

During AV mode, Volume correction is displayed. You can adjust volume level of AV mode.
Volume level is memorised.

13

Tuning menu – overview (Analogue mode)

In Analogue mode

Press the MENU button.

Move to Setup menu.

Access Setup menu.

Move to Tuning Menu.

Access Tuning Menu.

Move to menu option.

Adjust chosen option or access chosen menu.

Press the EXIT button at any time to go back to watching TV.

Press the OK button after having adjusted some features to store
the new settings as the default (replacing the factory setting).

Programme edit

Access in order to customize your programme settings
(e.g., adding or deleting a programme position). See
page 15, 16.

MENU

EXIT

OK

Main menu

Picture menu

MODE

OK

123

456

789

C

0

N

IDTV

Auto setup

Manual tuning

Allows you to automatically retune the TV. Useful if
you move house and wish to retune your TV to the
local stations. See page 17.

Allows individual programme positions to be tuned
manually. See page 18.

Sound menu

Setup menu

Setup menu

Q-Link
AV2 out
Teletext
Off timer
Powe r on preference
Tu ning Menu
Owner ID
Shipping condition

Tuning Menu

Programme edit
Auto setup
Manual tuning

Programme edit

Prog. Chan. Name Lock

1 :

CH44

2 :

CH51

3 :

CH41

4 :

CH47

5 :

CH37

Delete Add Move Download

ABC
XYZ
FTP
123
456

AV2
Monitor
FASTEXT
Off
TV

Access

Access

Off
Off
Off
Off
Off

14