Panasonic TX-32LXD1, TX-26LXD1 User Manual

MODE

1N23

456

789

Digital Progressive LCD TV

Operating Instructions

Model No.

TX-26LXD1 TX-32LXD1

Please read these instructions before operating your set and retain them for future reference.

English

TQBC0767

Welcome

Dear Panasonic Customer, We hope that you have many years of enjoyment from your new TV. The Quick Start Guide section at the beginning of this instruction book will allow you to use the TV as quickly as possible. We recommend that you then read the complete instruction book, and keep it to refer to as you explore the range of advanced features that this LCD TV offers.

Analogue and Digital television – what are they?

Analogue transmission is the system that has been used for many years for broadcasting television programmes. With continuous improvements in technology it is now possible to transmit programmes in a digital format, allowing clearer pictures, more stations and other services to be displayed on screen. Digital television is provided in three different ways; it can be sent along a cable connection direct to your house, broadcast from a satellite, or broadcast using traditional land based (terrestrial) transmitters. The first two options require you to have an extra “set top box” decoder and in the case of satellite, a receiving dish mounted outdoors. While allowing you to receive traditional analogue transmissions in the usual way, this television can also receive terrestrial digital services using an integrated

(Digital Video Broadcasting) decoder. This allows you to enjoy the new era of digital terrestrial television, including interactive services, without the need for a “set top box” or satellite dish – an adequate roof or loft mounted antenna is all you need.

Contents

Warnings and Precautions ........................................ 3

Accessories ............................................................... 4

Fitting remote control batteries ................................. 4

Cable cover removal and fitting ................................ 5

How to open the front cover ...................................... 5

How to use the LCD stand ........................................ 5

Quick Start Guide ...................................................... 6

Basic controls: front panel and remote control .......... 9

Using the On Screen Displays ................................ 10

Picture menu ............................................................11

Sound menu ............................................................ 12

Setup menu ............................................................. 13

Tuning menu – overview ......................................... 14

Tuning menu – Programme edit.............................. 15

Adding / deleting a programme channel .............. 15

Moving a programme channel ............................. 15

Renaming a programme channel ........................ 16

Locking a programme channel ............................ 16

Copying programme information to

a recording device .................................... 16

Tuning menu – Auto setup ...................................... 17

Tuning menu – Manual tuning................................. 18

Manual tuning (via front panel) .............................. 18

Shipping condition ................................................... 19

Owner ID ................................................................. 20

DVB System Setup ................................................. 21

Common Interface Module menu ............................ 22

Favourites Setup menu ........................................... 23

Information banner .................................................. 24

System Update menu ............................................. 25

DVB Timer programming menu .............................. 26

TV Guide ................................................................. 28

Q-Link...................................................................... 29

Aspect Controls ....................................................... 30

Multi window............................................................ 32

Picture and text ....................................................... 33

Photo View mode .................................................... 34

VCR / DVD operation .............................................. 38

Teletext operation .................................................... 39

Audio / video connections ....................................... 42

How to connect the Headphones / AV3 terminals 42

How to connect the Audio Output terminals ........ 43

How to connect the AV1 / 2 / 4 Scart terminals.... 43

How to connect the Component Input terminals .. 43

Troubleshooting ...................................................... 44

DVB Troubleshooting .............................................. 45

Maintenance ........................................................... 46

Scart and S-video terminal information ................... 46

Specifications .......................................................... 47

Warnings and Precautions

• This TV set is designed to operate on AC 220-240 V, 50 / 60 Hz.

• To prevent damage which might result in electric shock or fire, do not expose this TV set to rain or excessive moisture. This TV must not be exposed to dripping or splashing water and objects filled with liquid, such as vases, must not be placed on top of or above the TV.

• WARNING : HIGH VOLTAGE!!!

Do not remove the rear cover as live parts are accessible when it is removed. There are no user serviceable parts inside.

• TV Games / Home Computers

Extended use of TV games or home computers with any television set can cause a permanent ‘shadow’ on the screen. This type of irreversible LCD panel damage, can be limited by observing the following points:

• Reduce the brightness and contrast levels to a minimum

viewing level.

• Do not allow a still picture to be displayed for an extended

period, as this can cause a permanent after-image to remain on the LCD TV screen.

• Examples of still pictures include logos, video games,

computer images, teletext and images displayed in 4:3 mode.

• This type of LCD panel damage, is not an operating

defect, and as such is not covered by the Panasonic warranty.

• The On / Off switch on this model does not fully disconnect the TV from the mains supply. Remove the mains plug from the wall socket before connecting or disconnecting any leads, or if the TV set is not used for a prolonged period of time.

Note:

If the set is not switched off when the TV station stops transmitting, it will automatically go to Standby mode after 30 minutes. This function will not operate when the TV is in AV mode.

• Cabinet and LCD panel care

Remove the mains plug from the wall socket. The cabinet and LCD panel can be cleaned with a soft cloth moistened with mild detergent and water. Do not use solutions containing benzol or petroleum.

• When ambient temperature is cool, the picture may take a short time to reach normal brightness, but this is not a malfunction. (After brief moment, the picture will have normal brightness.)

• Adequate ventilation is essential to prevent failure of electrical components, we recommend that a gap of at least 10 cm is left all around this television receiver even when it is placed inside a cabinet or between shelves.

• Avoid exposing the TV set to direct sunlight and other sources of heat. To prevent fire, never place any type of candle or naked flame on top or near the TV set.

FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY

This appliance is supplied with a fitted three pin mains plug for your safety and convenience. A 5 amp fuse is fitted in this plug. If the fuse is replaced then the replacement fuse must be 5 amp rated and should be approved by ASTA or BSI to BS1362. Check for the ASTA mark If the fitted plug has a removable fuse cover you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. Replacement fuse covers can be purchased through your local Panasonic dealer.

The plug fitted to this appliance incorporates a mains filter circuit. If this is removed or replaced with a non– filtered plug this television will no longer meet the European standards for Electromagnetic Compatibility (EMC). If the fitted plug is unsuitable for the socket outlet in your home an appropriate adapter should be used.

Nonetheless, if the fitted plug is replaced, the fuse should be taken out and the cut- off plug disposed of safely. There is danger of severe electrical shock if the cut off plug is inserted into any 13 amp socket.

If a new plug is to be fitted please observe the wiring code as shown below. If in any doubt please consult a qualified electrician.

How to replace the fuse (for plug type shown in example 1):

Lift out the removable fuse compartment with a screwdriver and replace the fuse, then refit securely into the mains plug (see example 1).

How to replace the fuse (for plug type shown in example 2):

Lift open the fuse compartment, in the mains plug, with a screwdriver, and replace the fuse, then press the fuse cover down securely (see example 2).

IMPORTANT : – The wires in the mains lead of this appliance are coloured in accordance with the following code :–

BLUE : NEUTRAL BROWN : LIVE

As the colours of the wires in the mains lead of this appliance may not correspond to the markings identifying the terminals in your plug, proceed as follows :–

1. The BLUE wire must be connected to the terminal marked ‘N’ or coloured black.

2. The BROWN wire must be connected to the terminal marked ‘L’ or coloured red. IMPORTANT NOTE : Under no circumstances should either of these wires be connected to the Earth terminal of the three

ASA

or the BSI mark on the body of the fuse.

pin plug, marked with the letter ‘E’ or the earth symbol .

Example 1

Example 2

Accessories

Check that you have the accessories and items shown

Operating Instruction book (TQBC0767)

Remote Control Transmitter (EUR7635010)

MODE

1N23

456

789

Batteries for the Remote Control Transmitter (2 × R6 (UM3) size)

Fitting remote control batteries

1 2 3

TV Guarantee

“R6 (UM3)” size

Pull and hold the hook, then open the battery cover.

Insert batteries - note correct polarity ( + and

Replace the cover.

• Make sure that the batteries are fitted the correct way round.

• Do not mix old batteries with new batteries. Remove old, exhausted batteries immediately.

• Do not mix different battery types, i.e. Alkaline and Manganese or use rechargeable (Ni - Cad) batteries.

Batteries, packaging and old equipment should not be disposed of as domestic waste, but in accordance with the applicable regulations.

Cable cover removal and fitting

Removal

1. Push down hooks and pull the cover slightly towards

yourself to disengage the claws (at 4 points).

2. Slowly pull out in the downward direction.

Fitting

1. Insert the claws (at 4 points) at the bottom end.

Note:

To avoid interference appearing on the screen, do not bundle the RF cable and mains lead together.

2. Push until it clicks.

How to open the front cover

Lift up the cover where the mark “ Pull down to close the cover.

” is shown.

How to use the LCD stand

Adjust the LCD panel to your desired angle. The LCD panel can be swiveled up to 40 ° in the right-and-left direction.

(View from the top)

Note:

The LCD panel cannot be tilted forward and backward.

Front

Quick Start Guide

Connection and setting up options

Note: Please ensure that the unit is disconnected from the mains

before attaching or disconnecting any leads.

Satellite Receiver

RF cable (Not supplied)

AV1 AV2 AV4

RF cable (Not supplied)

Scart cables (Not supplied)

VCR / DVD Recorder

Scart Connections

• The VCR / DVD Recorder can be connected to the TV using a Scart cable, if you are using a Scart equipped VCR / DVD Recorder.

• Use the TV’s any Scart terminal for any VCR. Always use a “fully wired” Scart cable.

• Use the TV’s AV1 or AV4 Scart terminal for any DVD Recorder. Always use a “fully wired” Scart cable.

• Use the TV’s AV1 or AV4 Scart terminal for Satellite Receiver. Always use a “fully wired” Scart cable.

RF Connection

• Connect the RF cable to the “Aerial In” terminal of the VCR / DVD Recorder and an RF cable from the VCR / DVD Recorder “Aerial Out” terminal to the TV Aerial terminal (

Notes:

• If using a “Q-Link” VCR / DVD Recorder, then the AV1 Scart of the VCR / DVD Recorder must be connected to the AV2 or AV4 terminal of the TV. If your VCR or DVD Recorder is not a “Q-Link” device, please consult the operating instruction book for that product. Further information on Q-Link can be found on page 29.

• Further details of Audio / Video connections can be found on page 42, 43.

• Additional equipment and cables are not supplied.

Quick Start Guide

Connect the mains plug to the wall socket.

Press the switch on the TV set to turn

the set on.

To switch the TV set to Standby mode, press the button on the remote control. The TV set can be switched on by pressing the button again if it was in Standby mode.

123

456

789

Note:

This TV will still consume some power even in the Off mode, as long as the mains plug is still connected to a live mains socket.

Power Indicator Standby : Red

On : No Light

Remote control signal sensor

IDTV

DVB Indicator DVB system active for recording

or DVB tuner lock on : Orange Otherwise : No Light

Programmes will appear immediately if your dealer has programmed

the TV for you. If the TV has not been programmed for you then Auto setup will begin. The TV will search for Analogue stations and DVB stations: TV stations will be located, sorted into order and stored ready for use.

CH44

AUTO SETUP IN PROGRESS SEARCHING : PLEASE WAIT

21 68

EXIT : To exit

Stations are sorted into the following order:

• DVB Stations: Are sorted by their logical channel number sent by the broadcasters, which cannot be moved or changed.

• Analogue Stations: Are sorted into channel order, but can be changed to your preference. See page 15.

The sorted programme order depends upon the TV signal, the

DVB Auto Setup

Please wait ! Prog.

Channel 46 47 48 49 50

This will take about 3 mins.

Service Name

BBC 5L Sportex

BBC R5 Live

CBeebies

BBC Four

BBC PARLINT

21 68

Net ID

TS ID

12302

16384

12302

16384

12302

16384

12302

16384

12302

16384

broadcasting system, and reception conditions.

TV to VCR or DVD Recorder Download

If a “Q-Link”, “NEXTVIEWLINK” or compatible recording device has been connected to a Scart terminal (AV2 or AV4) before starting

DOWNLOAD IN PROGRESS

PLEASE WAIT

Programme : 63

Remote control unavailable

Step 1, programme information will be downloaded to that device. Only the analogue programme positions will be downloaded to the recording device, in the same order as

stored in the TV. See page 29. Not all VCRs / DVD Recorders support this download of programme information, some may require to be

started manually. Refer to the recording device’s operating instruction book.

If a recording device other than those described above has been connected, then there will be no download operation.

Notes:

• If the recording device has not accepted download data from the TV, you may need to select the Download option from the device’s menu system. Refer to the recording device’s operating instruction book.

• If Q-Link is not operating correctly, check the following : The Scart cable is connected to the TV’s Scart terminal, AV2 or AV4, and correctly setup in the menu. The Scart cable is connected to the recording device’s compatible (Q-Link, NEXTVIEWLINK or similar technology) Scart terminal. The Scart cable is a “fully wired” type.

• For further information on Q-Link and connecting equipment, see page 29, 43, 46.

MODE

Quality

8 8 8 8 8

Quick Start Guide

Owner ID

As an added feature, this TV has the option of adding a security code (Owner ID) and personal details into its memory, so that in the unfortunate event of theft it will help the Police to trace the owner.

Using the numeric buttons to enter required 4 digit Owner ID PIN NUMBER. If a 4 digit PIN NUMBER was entered, you will be taken automatically to the NAME line.

If not, using the left or right cursor buttons move to the NAME line.

Change character using the up or down cursor buttons.

123

456

789

VCR

MODE

123

456

789

Select the character position using the left or right cursor buttons. Repeat above until NAME, HOUSE NUMBER and POSTCODE

are entered. Press the OK button to store the details.

Press the OK button again, when you are asked “Are you sure ? ”.

For further information on Owner I.D., see page 20.

A space is provided on page 20 to write down the PIN NUMBER for future reference.

Your LCD TV is now ready for use.

To view a list of the stations that have been found, press the GUIDE

button. See page 28. Use the cursor buttons to move the cursor bar up and down the list.

Use the programme change button to step through the guide page by page.

To view the selected programme press the OK button.

Categories (DVB mode only) To make stations easier to find, specific stations can be listed by category; press the left or right cursor button to choose a category. The chosen category name is shown on screen. For example, if you select Free TV, only ‘free-to-air’ stations will be listed – you can view any of these now.

If you select Pay TV, only subscription stations will be listed – you will need to contact the service provider to find out how to subscribe to these stations. A separate guide is available when viewing analogue mode. In this guide, use the cursor buttons to move the cursor bar around the list, use the programme change button to step through the guide page by page. Press the OK button to view the selected programme.

Both guides can be cleared from the screen using the EXIT button.

IDTV

You now have the opportunity to enter your details and help the police crack crime see instruction book

Change

Owner ID

PIN NUMBER :

NAME :

HOUSE NO :

POSTCODE :

0123456789

character Select character

∗ ∗ ∗ ∗

∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗

Store Owner ID

Exit

GUIDE

MODE

123

DVB TV Guide

Prog. Category

All Services

1 2 76543

Fri Sat Sun Mon Tue WedThu

PROG. EPG Date 14/08/03 Time 13 : 09 1

BBC ONE

BBC 2

I TV

S4C

fiye

I TV 2

BBC THREE

Select EPG

Analogue Programme Guide

Prog. Name Chan.

VCR :

1 :

BBC1

2 :

BBC2

3 :

ITV

4 :

S4C 5 : 6 : 7 : 8 : 9 :

10 :

11 :

12 :

456

789

Free TV Pay TV Radio

13 : 00 BBC News 13 : 23 Wales Today

Prog. Name Chan.

CH21

13 :

CH44

14 :

CH51

15 :

CH41

16 :

CH47

17 :

CH23

18 :

CH26

19 :

CH58

20 : 21 :

22 :

23 :

24 :

Basic controls: front panel and remote control

F (Function select)

Displays the On Screen Display functions, use repeatedly to select from the available functions - Volume, Backlight, Contrast, Brightness, Colour,

Sharpness, Tint (in NTSC mode), Bass, Treble, Balance and Tuning mode. STR (Normalization store)

Used to store tuning and other function settings.

PC Card slot (see page 35)

On / Off switch

Standby On / Off button Switches TV On or Off (Standby mode).

GUIDE button

Displays the DVB and Analogue TV Guide. (see page 28)

Cursor buttons to make selections and adjustments.

Menu button Press to access the Picture, Sound and Setup menus. (see page 10-13)

Teletext button (see page 39-41)

STTL button (see page 21) Text F.P. button (Analogue mode) (see page 40)

N (Normalize) button Resets all settings to their default levels.

Channel up / down button

Sound mute On / Off Direct channel access

(Analogue mode only) During normal TV viewing or when in the

Tuning, Programme edit or Manual tuning menus, press and then enter

channel number using the numeric buttons.

ASPECT control button (see page 30, 31)

Ambience On / Off (see page 12)

SD Card slot

(see page 35)

Photo View mode button (see page 37-40)

DVB

Analogue

MODE

GUIDE TV/AV

TV/TEXT

STTL INDEX HOLD

EXIT

123

456

789

VCR

ASPECT

REC VCR DVD

PROGRAMME

MULTI WINDOW

DIRECT TV REC

Increases or decreases the programme position by one. When a function is already displayed, press to increase or decrease the selected function. When in Standby mode, switches TV On.

Headphones jack

(see page 42)

TV/AV button (see page 42)

MODE button (see page 12, 13) Switch between viewing DVB and Analogue modes.

Switch between viewing TV or AV input. (see page 42)

Press to confirm selections and choices. Press after selecting programme positions 1-99 (0-9 in Analogue mode) to avoid delay.

Exit the mode. Coloured buttons used for the selection,

navigation and operation of various functions.

Text Hold button (see page 39)

Text Index button (see page 41) Volume up / down button

Programme / channel change buttons (0-

9) and Teletext page buttons. (see page 39-41) When in Standby mode, switches TV On.

Status button Press to display status information for the current Programme position. (see page 24)

DIRECT TV Record button (see page 29)

MULTI WINDOW button (see page 32, 33)

VCR / DVD buttons (see page 38)

AV3 terminals

(see page 42)

IDTV

Using the On Screen Displays

Many features available on this TV can be accessed via the On Screen Display menu system. Use the remote control as shown below to access and adjust features as desired.

The MENU button is used to open the main menus and also to return to the previous menu.

The up and down cursor buttons are used to move the cursor and select menus.

The left and right cursor buttons are used to access menus, adjust levels or to select from a range of options.

The OK button is used with a number of features to store settings after adjustments have been made or options have been set.

The EXIT button is used to exit the menu system and return to the normal viewing screen.

An On Screen Help box is displayed whenever a menu is displayed on the TV. This Help box indicates which buttons on the remote control are used to navigate the menu shown, see above for descriptions of button functions.

Note:

The Help box is not shown in the menu pictures in this instruction book due to space limitations.

EXIT

ON SCREEN HELP ‘Instructions’ box

Sound menu

Bass Treble Balance Headphone volume NICAM Mode Ambience

123

456

789

IDTV

Select Adjust

Return

Off Music Off

MODE

Exit

Picture menu

Press the MENU button.

Move to choose Picture menu.

Access Picture menu.

Move to choose menu option.

Adjust chosen option or access chosen menu.

Press the EXIT button at any time to go back to watching TV.

Viewing mode The Viewing mode menu allows you to select three

different screen settings - Dynamic, Normal and Cinema. In each Viewing mode setting, Backlight, Contrast, Brightness, Colour, Sharpness, Tint (in NTSC only), Colour balance, P-NR and 3D-COMB can be adjusted and stored to suit your particular viewing requirement. (e.g., you may require different settings for viewing sports, films, news etc.) Changes to any settings in a viewing mode will affect all signal sources: RF, AV1, AV2, AV3 and AV4. Changes will be stored automatically. By analysing and processing the incoming picture, all three modes feature automatic enhancement.

EXIT

Main menu

Pic ture menu

Picture menu

Viewing mode Backlight Contrast Brightness Colour Sharpness Tint Colour balance P-NR 3D-COMB

MODE

123

456

789

IDTV

Sound menu

Setup menu

Dynamic

Normal Off On

Backlight, Contrast, Brightness, Colour, Sharpness

Increase or decrease the levels of these options according to your personal preference.

Tint

With an NTSC signal source connected to the TV, the picture hue can be adjusted to suit your taste.

Colour balance

Allows you to set the overall colour tone of the picture. Choose from Cool, Normal and Warm.

P-NR

3D-COMB

Automatically reduces unwanted picture noise.

Not available in DVB mode. Occasionally, whilst viewing still or slow moving pictures, colour patterning may be seen. Set 3D-COMB to On to display sharper and more accurate colours. Displayed only when receiving PAL or NTSC signals. Not displayed during RGB Video, S-Video input and AV4C input mode.

Picture menu

Viewing mode Backlight Contrast Brightness Colour Sharpness Tint Colour balance P-NR 3D-COMB

Picture menu

Viewing mode Backlight Contrast Brightness Colour Sharpness Tint Colour balance P-NR 3D-COMB

Dynamic

Normal Off On

Dynamic

Normal Off On

Sound menu

Press the MODE button to select DVB or Analogue mode.

Press the MENU button.

Move to choose Sound menu.

Access Sound menu.

Move to choose menu option.

Adjust chosen option or access chosen menu.

Press the EXIT button at any time to go back to watching TV.

DVB

Analogue

MODE

EXIT

MODE

123

456

789

IDTV

Bass

Treble

Balance

Headphone volume

NICAM

Multi audio

Mode

Increase or decrease level to enhance or minimise lower, deeper sound output.

Increase or decrease level to enhance or minimise sharper, higher sound output.

The levels of sound between the left and right speakers can be adjusted to suit your listening position.

Can be adjusted independently of the TV speakers so that everyone can enjoy listening at a level comfortable for them.

Not available in DVB mode. Select On to provide stereo sound reproduction. Select Off for FM Mono sound output. If Nicam Mono is being transmitted select either FM Mono (Off), Nicam Mono I (M1) or Nicam Mono II (M2). The options depend upon the signal being transmitted. If reception deteriorates it is advisable to switch to FM Mono (Off).

Multi audio, which will only appear when a DVB programme is selected, allows you to select an alternative sound track. The number of options available depends on each broadcast.

Sound quality can be improved when watching music scene or drama by selecting the appropriate Music or Speech mode.

Main menu

Pic ture menu

Analogue mode

Sound menu

Bass Treble Balance Headphone volume NICAM Mode Ambience

DVB mode

Sound menu

Bass Treble Balance Headphone volume Multi Audio Mode Ambience

Sound menu

Setup menu

Off Music Off

No service Music Off

Ambience

Ambience provides a dynamic enhancer to simulate improved spatial effects.

Setup menu

Press the MODE button to select DVB or Analogue mode.

Press the MENU button.

Move to choose Setup menu.

Access Setup menu.

Move to choose menu option.

Adjust chosen option or access chosen menu.

Press the EXIT button at any time to go back to watching TV.

DVB

Analogue

MODE

EXIT

MODE

123

456

789

Q-Link

AV2 / AV4 out

Teletext

Off timer

Power on preference

Analogue Tuning Menu

DVB Timer Programming

DVB Tuner lock

DVB Auto Setup DVB System Setup New Service

Message Shipping condition

Child Lock

Volume correction

Allows you to select which AV terminal is to be used for data communication between this TV and a compatible recording device. Choose from AV2 and AV4. See page

29. Offers a choice of signals to send to the Scart terminal

selected in the Q-Link option. You can choose from the current TV (Analogue, DVB) programme position, the signal entering AV1 / AV2 / AV3 / AV4 or Monitor - the picture displayed on screen.

Allows you to choose between FASTEXT or List mode. See page 39-41.

Switches the TV off within a preset time which you can choose from between 0 to 90 minutes in 15 minute intervals.

Set to TV to view picture from TV tuner. Set to AV to view input from an external equipment connected to a Scart socket, e.g. satellite receiver.

Note:

The external equipment must be switched on and sending a control signal for automatic switching at power on to occur.

Provides access to many other features including Programme edit and Auto setup. See page 15-17.

Allows you to enter programme times at which the DVB tuner must switch on, ready for recording. See page 26.

Main menu

Pic ture menu

Sound menu

Setup menu

Analogue TV mode

Setup menu

Q-Link AV2 out Teletext Off timer Power on preference Analogue Tuning Menu

DVB mode

Setup menu

DVB

Timer programming DVB Tuner lock DVB Auto Setup DVB System Setup New Service Message Shipping condition Q-Link AV2 out Off timer Child lock Power on preference

AV mode

Setup menu

Q-Link AV2 out Teletext Off timer Volume correction Power on preference

AV2

Monitor FASTEXT Off TV

Access

Off

AV2 Monitor Off Off TV

AV2

Monitor FASTEXT Off

Prevents you from accidentally changing programme position while recording a DVB broadcast. If the TV is switched into standby mode while DVB tuner lock is on, the DVB tuner will remain active to ensure recording can still take place.

Allows you to clear all current digital tuning data, and scan for new services. See page 17. Provides access to various specialised DVB options. See page 21. This TV continually scans for updated DVB services and notifies you of any changes. Set to On to

receive notification. Set to Off if you do not wish to be informed of any updates. Allows you to clear all tuning information and reset all control levels back to factory settings. See

page 19. You may wish to lock a DVB programme channel to prevent access to it. Set to On to lock the

current programme position. Set to Off to unlock. When a programme position is locked, Direct Channel Access using the C and numeric keys on the remote control is not available.

During AV mode, Volume correction is displayed. You can adjust volume level of AV mode. Volume level is memorised.

Tuning menu – overview

During Analogue mode

Press the MENU button.

Move to choose Setup menu.

Access Setup menu.

Move to choose Analogue Tuning Menu.

Access Analogue Tuning Menu.

Move to choose menu option.

Adjust chosen option or access chosen menu.

Press the EXIT button at any time to go back to watching TV.

Press the OK button after having adjusted some features to store the new settings as the default (replacing the factory setting).

Programme edit

Access in order to customize your programme settings (e.g., adding or deleting a programme position). See page 15, 16.

Auto setup

Allows you to automatically retune the TV. Useful if you move house and wish to retune your TV to the local stations. See page 17.

Manual tuning

Allows individual programme positions to be tuned manually. See page 18.

Shipping Condition

Allows you to clear all tuning information and reset all control levels back to factory settings. See page 19.

Owner ID

Allows you to enter a security code and address information. See page 20.

MODE

123

456

789

IDTV

EXIT

Main menu

Pic ture menu

Sound menu

Setup menu

Q-Link AV2 out Tel e te x t Off timer Power on preference Analogue Tuning Menu

Analogue Tuning Menu

Programme edit Auto setup Manual tuning Shipping condition Owner ID

Programme edit

Prog. Chan. Name Lock

1 :

CH44

2 :

CH51

3 :

CH41

4 :

CH47

5 :

CH37

Delete Add Move Download

ABC XYZ FTP 123 456

AV2 Monitor FASTEXT Off TV

Access

Off Off Off Off Off

Tuning menu – Programme edit (Analogue mode only)

During Analogue mode

Press the MENU button.

Move to choose Setup menu.

Access Setup menu.

Move to choose Analogue Tuning Menu.

Access Analogue Tuning Menu.

Move to choose Programme edit.

Access Programme edit.

Move to choose programme position (e.g., Prog. 3). Make required change, e.g., moving a programme channel

(see the relevant procedure below). Press the EXIT button at any time to go back to watching TV. Press the OK button after having adjusted some features to

store the new settings.

Adding / deleting a programme channel

EXIT

MODE

123

456

789

IDTV

Move the cursor to the programme to be deleted or added.

Press the Green button to add a programme channel to the programme position, or the Red button to delete one.

Press the same button again to confirm your decision.

Moving a programme channel

Move the cursor to the programme to be moved.

Press the Yellow button.

Choose the new position for the programme channel.

Press the Yellow button again to confirm your decision.

Yellow

Programme edit

Prog. Chan. Name Lock

1 :

CH44

2 :

CH51

3 :

CH41

4 :

GreenRed

CH47

5 :

CH37

Add Cancel

Programme edit

Prog. Chan. Name Lock

1 :

CH44

2 :

CH51

3 :

CH41

4 :

CH47

5 :

CH37

ABC

XYZ FTP 123 456

ABC

XYZ FTP 123 456

Off

Off Off Off Off

Off

Off Off Off Off

Confirm Cancel

+ 33 hidden pages