Insert the mains plug fully into the socket outlet. (If the mains plug is loose, it could generate heat and cause fi re.)
Ensure that the mains plug is easily accessible.
Do not touch the mains plug with a wet hand. (This may cause electrical shock.)
Do not damage the mains lead. (A damaged lead may cause fi re or electrical shock.)
Do not move the TV with the lead plugged in the socket outlet.
Do not place a heavy object on the lead or place the lead near a high-temperature object.
Do not twist the lead, bend it excessively, or stretch it.
Do not pull on the lead. Hold onto the mains plug body when disconnecting lead.
Do not use a damaged mains plug or socket outlet.
If you fi nd any
abnormality,
remove the mains plug
immediately!
AC 220-240 V
50 / 60 Hz
Do not remove covers
NEVER modify the TV yourself
(High-voltage components may cause serious
electrical shock.)
Have the TV checked, adjusted, or repaired at your
local Panasonic dealer.
Keep liquids away from the TV
To prevent damage which may result in fi re or
shock hazard, do not expose this appliance to
dripping or splashing.
Do not place containers with water (fl ower vase,
cups, cosmetics, etc.) above the TV. (including on
shelves above, etc.)
Do not place foreign objects
inside the TV
Do not let metal or fl ammable objects drop into the
TV through the air vents (fi re or electrical shock
may result).
Do not place the TV on sloped
or unstable surfaces
The TV may fall off or tip over.
4
Do not expose to direct sunlight
and other sources of heat
Avoid exposing the TV to direct sunlight and other
sources of heat. To prevent fi re never place any
type of candle or naked fl ame on top or near the TV.
Use only the dedicated stands
/ mounting equipment
Using an unauthorized stand or other fi xtures may
make the TV shaky, risking injury. Be sure to ask
your local Panasonic dealer to perform setup.
Use optional stands / mounts (p. 6).
Notes
Caution
When cleaning the TV, remove the
mains plug
(Cleaning an energized TV may cause electrical shock.)
When TV will not be used for a
long time, remove the mains plug
This TV will still consume some power even
in the Off mode, as long as the mains plug is
still connected to a live socket outlet.
Allow suffi cient space around the
TV for radiated heat
Minimum distance
10
10
10
TV Stand
10
(cm)
Auto power standby function
If no signal is received and no operation is
performed in TV mode for 30 minutes, the TV will
automatically go to standby mode.
Keep the TV away from these equipment
Electronic equipment
In particular, do not place video equipment near the
TV (electromagnetic interference may distort images
/ sound).
Equipment with an infrared sensor
This TV also emits infrared rays (this may affect
operation of other equipment).
Transport only in upright position
Adjust the LCD panel to your desired
angle
(View from the top)
15° 15°
Do not block the rear air vents
Blocked ventilation by curtains,
etc. may cause overheating, fi re
or electrical shock.
Maintenance
First, remove the mains plug from the socket outlet.
Display panel
Regular care: Gently wipe the surface clean of dirt by using a soft cloth.
Major contamination: Wipe the surface clean using a soft cloth dampened with clean water or diluted neutral
detergent by 100 times of water. Then, using a soft dry cloth, evenly wipe the surface clean until it is dry.
Caution
The surface of the display panel has been specially treated and may be easily damaged.
•
Do not tap or scratch the surface with your fi ngernail or other hard object.
Use care not to subject the surface to bug repellent, solvent, thinner, or other volatile substances
•
(this may degrade surface quality).
Cabinet
Regular care: Wipe the surface clean using a soft dry cloth.
Major contamination: Dampen a soft cloth with clean water or water containing a small amount of neutral detergent.
Then, wring the cloth and wipe the surface clean with it. Finally, wipe the surface clean with a dry cloth.
Caution
Use care not to subject the TV's surfaces to detergent.
•
(A liquid inside the TV could lead to product failure.)
Use care not to subject surfaces to bug repellent, solvent, thinner, or other volatile substances
•
(this may deteriorate the surface by peeling the paint).
Do not allow the cabinet to make contact with a rubber or PVC substance for a long time.
•
Mains plug
Wipe the mains plug with a dry cloth at regular intervals. (Moisture and dust may lead to fi re or electrical shock.)
5
Accessories / Options
Standard accessories
Transmitter
EUR7651120
•
Operating InstructionsPan European Guarantee Card
OK
132
465
798
0
TV
Installing remote’s batteries
1
Hook
2
Note the correct
polarity (+ or -)
+
+
-
Check that you have the accessories and items shown
Batteries for the Remote
Control Transmitter
R6 (UM3)
•
(2)
Using the clamper
Pull
open
Close
Rear of the TV
Clamper
(Standard accessory)
To tighten:
ClamperRemote Control
Bottom Sheet
Use when removing the
TV Stand (see below)
Clamper
that bundle
mains lead
Bundle the
cables:
Lock
Caution
Incorrect installation may cause battery
•
leakage and corrosion, resulting in
damage to the remote control.
Do not mix old and new batteries.
•
Do not mix different battery types (such
•
as alkaline and manganese batteries).
Do not use rechargeable (Ni-Cd)
•
batteries.
Do not burn or breakup batteries.
•
Optional accessories
Wall-hanging
bracket
TY-WK32LR2W
WARNING!
Failure to use a Panasonic bracket or choosing to mount the unit
•
yourself will be done at the risk of the consumer.
Any damage resulting from not having a professional installer
mount your unit will void your warranty.
Always be sure to ask a qualifi ed technician to carry out set-up.
•
Incorrect fi tting may cause equipment to fall, resulting in injury
and product damage.
Do not mount the unit directly below ceiling lights (such as
•
spotlights, fl oodlights or halogen lights) which typically give off
high heat. Doing so may warp or damage plastic cabinet parts.
Please contact your nearest Panasonic dealer to purchase the recommended
wall-hanging bracket. For additional details, please refer to the wall-hanging
bracket installation manual.
To loosen:
Keep the knob pressed
Do not bundle the RF cable and mains lead together (could cause distorted image).
•
Fix cables with clampers as necessary.
•
When using the optional accessory, follow the option’s assembly manual to fi x cables.
(senses brightness to adjust picture quality in “Auto” Mode in Picture Menu) (p. 20)
Increases or decreases the programme
position by one. When a function is
already displayed, press to increase or
decrease the selected function. When in
Standby mode, switches TV On.
Quick Start Guide
Standby On / Off switch
(Switches TV On or Off standby)
Changes aspect ratio
OK button to confi rm selections and choices
Press after selecting programme positions to
quickly change programme.
Main Menu
Press to access VIERA Link, Picture,
Sound and Setup menus
Surround (p. 20)
Access VIERA Link Menu
Programme / channel change buttons (0-9)
and Teletext page buttons.
When in Standby mode, switches TV On.
Programme Information
Selects programmes in sequence
(p. 13)
(p. 18)
(p. 31)
(p. 12 and p. 16)
(p. 13)
ASPECT
MENU
132
465
798
OK
OPTION
0
VCR
INPUT
EXIT
RETURN
DIRECT TV REC
Changes the input mode
changes TV mode
TV AV - changes AV input mode (p. 14)
EXIT
(Returns to TV screen)
Cursor buttons to make selections and
adjustments
Returns to the previous menu
Coloured buttons used for the
selection, navigation and operation of
various functions
DIRECT TV Recording
To immediately record programme in VCR /
DVD recorder with Q-Link connection
(p. 28)
Option menu
Sets the preferred settings of viewing
and sound options easily
Sound mute On / Off
Volume
(p. 14)
(p. 13)
•
•
Identifying Controls
Accessories / Options
Teletext (p. 16)
Viewing a favourite teletext channel (p. 17)
VCR / DVD operations (p. 15)
TEXT F.P. INDEX HOLD
REC
VCR DVD
PROGRAMME
TV
Still picture
Teletext Hold (p. 17)
Teletext Index (p. 17)
(p. 13)
7
Basic Connection
External equipment and cables shown are not supplied with this TV.
Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.
Example 1
Connecting aerial
Example 2
Connecting DVD Recorder / VCR
TV onlyTV, DVD Recorder or VCR
AerialAerialRear of the TVRear of the TV
AC 220-240 V
50 / 60 Hz
RF
cable
C
O
M
P
O
N
E
N
T
PC
Mains lead
R
AUDIO OUT
PC
Mains lead
R
AUDIO OUT
L
Y
P
B
V
I
D
E
O
P
R
L
A
U
D
R
I
O
AC 220-240 V
50 / 60 Hz
L
Y
P
B
V
I
D
E
O
P
R
L
A
U
D
R
I
O
C
O
M
P
O
N
E
N
T
8
DVD Recorder or VCR
Note
Connect to AV1 / 2 for a DVD Recorder / VCR supporting Q-Link (p. 28).
•
SCART cable
(fully wired)
RF cable
RF IN
RF OUT
RF cable
Example 3
Connecting DVD Recorder / VCR and Set top box
TV, DVD Recorder / VCR and Set top box
Rear of the TV
AC 220-240 V
50 / 60 Hz
Aerial
Quick Start Guide
Mains lead
L
PC
R
AUDIO OUT
Y
P
B
V
I
D
E
O
A
U
D
I
O
C
O
M
P
R
P
O
N
E
N
L
T
R
RF cable
RF cable
•
Basic Connection
SCART cable
(fully wired)
SCART cable
(fully wired)
SCART cable
(fully wired)
DVD Recorder
Set top box
RF OUTRF INRF OUTRF INRF IN
RF cable
or VCR
RF cable
9
Auto Setup
Search and store TV channels automatically.
These steps are not necessary if the setup has been completed by your local dealer.
Plug the TV into mains socket and switch On
(Takes a few seconds to be displayed)
1
You can now use the remote
•
control to turn On the TV or turn
the TV to standby mode.
(Power LED: On)
Select the language
Menüsprache
ASPECT
INPUT
EXIT
2
Deutsch
English
Français
Italiano
Еλληνικά
Čeština
Slovenčina
Srpski
Español
Norsk
Dansk
Svenska
Magyar
Български
Slovenščina
Nederlands
Suomi
Türkçe
Português
Hrvatski
Românǎ
Polski
select
store
OK
MENU
OPTION
132465798
0
VCR
TEXT F.P. INDEX HOLD
REC
VCR DVD
PROGRAMME
TV
RETURN
DIRECT TV REC
3
4
Select your country
Country
Germany
Austria
France
Italy
Spain
Portugal
Netherlands
Denmark
Sweden
Norway
Finland
Belgium
Switzerland
Greece
Poland
Czech
Hungary
Ireland
E.Eu
Start Auto Setup
Auto Setup - DVB and Analogue
Auto Setup
DVB Scan2168Analogue Scan2168
Scan2214199
ChannelService NameTypeQuality
Channel Service Name
62
CBBC ChannelDVB10
CH 29
62BBC Radio WalesDVB10
CH 33
62BBC Radio CymruDVB62E4DVB
62Cartoon NmkDVBCH 29Analogue-CH 33BBC1Analogue-
This will take about 3 mins.
This will take about 3 mins.
EXIT
EXIT
RETURN
RETURN
DOWNLOAD IN PROGRESS
PLEASE WAIT
Programme : 63
Remote control unavailable
101010
select
Auto Setup will start to search for
•
TV channels and store them.
The sorted programme order
depends upon the TV signal,
the broadcasting system and
reception conditions.
If a compatible recording equipment
•
with Q-Link or similar technologies
(p. 28) is connected, channel
information is automatically
downloaded to the equipment.
10
5
Select the picture setting
Viewing Mode
DynamicNormalCinemaAuto
Also possible to change the setting
•
in Picture Menu (p. 20)
Auto Setup is now complete and your TV is ready for viewing.
To edit channels
•
Editing and Setting Channels
(p. 22)
select
set
Many features available on this TV can be accessed via the On Screen Display
menu.
How to use remote control
Ŷ
MENU
Open the main menu
Move the cursor / select the menu
Move the cursor / adjust levels / select from a range of options
Access the menu / store settings after adjustments have been made or options
have been set
Quick Start Guide
Using the
On Screen
Displays
RETURN
Return to the previous menu
EXIT
Exit the menu system and return to the normal viewing screen