Panasonic TH-85PF12U Installation Instructions

(The ratings and appearance are subject to change without notice.)

TH-85PF12U/K/W

Dimensions (W x H x D)

Screen size
Weight

Power consumption
Display panel

Power supply
Audio output

W 2,015 x H 1,195 x D 99 mm

W 2,194 x H 1,480 x D 549 mmPackage size

1899/1062/2167 mm

PDP: 125 kg / With the package: Approx. 160 kg (*1)

1,250W

1,920 x 1,080 pixels [1 pixel = 3 cells (RGB)]Number of pixels (H x V)

40000:1Contrast

2,000,000:1Dynamic contrast

6,144 shades of gray (equivalent)Gray scale levels

0 to 2,800 mAltitude

40 WSlot power supply

Applied (AGLR finish)AR coating

Compliant with the requirements of the destination country

Audio line-out

Possible (without additional fans, with the power button side up.)Installation in portrait orientation

Environmental requirements

*1: When a plastic pallet is used (The specifications have yet to be determined.)

Temperature: 0°C to 40°C (Multi-system: 0°C to 35°C)

Humidity: 20% to 80%

Altitude: 0 to 2,800 m

z Install the PDP in accordance with applicable laws and regulations of the

destination country/region.

z The installation work must be carried out only by professionals.
z The power supply for this PDP must meet the requirements of the destination

country. The rated power consumption is TBD.
It is recommended that the PDP use a dedicated power line.

z Provide adequate ventilation in the installation location so that the ambient

temperature will not exceed 40°C.
Make a clearance of 100 mm or more above and on both sides of the PDP and a
clearance of 150 mm or more behind the PDP.

z The length of the power cord supplied with the PDP is 3 m.
z Position of the center of gravity (Reference)

 Horizontal and vertical center of gravity: The center of the set
 Depth from the front to the center of gravity of the set

 PDP alone: 33 mm
 With the wall mount bracket: 51 mm

z Eye bolt type

The size of the eye bolts on the PDP (two on the left and right sides and three on
the top) is M12-20 mm.

(Subject to change without notice due to improvements of the product specifications and/or design.)

(Subject to change without notice due to improvements of the product specifications and/or design.)

z Stationary stand

 The height of the PDP bottom side is 62.5 mm from the stationary stand. The PDP

can be set 50 mm higher to avoid interference between the PDP and the stand due
to the attachment of a touch panel or for other reasons. At the higher position, the
height of the PDP bottom side is 112.5 mm.

 To prevent the stand from tipping over, fix the stand to the table by four points using

the supplied bands. In addition, fix the PDP to the wall by two points using strong
wires.

 The stationary stand weighs 55 kg, and the total weight including the PDP is about

180 kg. Do not install the stand with the PDP in a location that cannot withstand the
load.

 To prevent the PDP from coming off the mounting bracket, fix the PDP with M8 bolts.

z Floor stand

 With the floor stand, the PDP height is adjustable to three different levels.
 The height of the PDP bottom side is 1,000 mm/900 mm/800 mm from the floor

stand.

 To prevent the stand from tipping over, fix the PDP by four points using adjusters. In

addition, fix the PDP to the wall by two points using strong wires.

 To prevent the PDP from coming off the mounting bracket, fix the PDP with M8 bolts.

z Stand specifications (Model No.: TY-ST85PF12)

 Dimensions: W 1,425 x H 1,413 to 1,606 x D 871 mm
 Weight: 75.0 kg
 Height adjustable to three levels

BA
1,995800
2,095900
2,1951,000

B

A

(Subject to change without notice due to improvements of the product specifications and/or design.)

z Stand specifications (Model No.: TY-ST85P12)

 Dimensions: W 1,401 x H 727 x D 443 mm
 Weight: 55.0 kg

(Subject to change without notice due to improvements of the product specifications and/or design.)