Panasonic TH-70SF2HW User Manual

Operating Instructions

80-inch model

70-inch model

80-inch model

70-inch model

80-inch model

Basic Guide

FULL HD LCD Display For business use

English

For more detailed instructions, refer to the Operating Instructions on the CD-ROM.

Model No. TH-80SF2HU

TH-70SF2HU TH-80SF2HW TH-70SF2HW

Contents

Important Safety Instructions ····················· 2 FCC STATEMENT ·································· 3 Important Safety Notice ···························· 4 Safety Precautions ·································· 6 Precautions for use ································· 9 Feature of This Unit ································11 Accessories ··········································11 Cautions when moving ··························· 12 Eyebolt Connections ········································ 14 Identifying Controls ······························· 17 Basic Controls ······································ 19 Specifications ······································ 21 Software License ·································· 23 Panasonic Professional Flat Panel Display

Limited Warranty LIMITED WARRANTY STATEMENT ········· 25 Customer Service ································· 26

························ 13

··································· 24

Please read these instructions before operating your set and retain them

•

for future reference.

Illustrations and screens in this Operating Instructions are images for

•

illustration purposes, and may be different from the actual ones.

Descriptive illustrations in this Operating Instructions are created mainly

•

based on the 70-inch model.

DPQX1274ZA

WARNING

WARNING: To reduce the risk of electric shock, do not remove cover or back.

No user-serviceable parts inside. Refer servicing to qualified service personnel.

The lightning flash with arrow-head within a triangle is intended to tell the user that parts inside the product are a risk of electric shock to persons.

The exclamation point within a triangle is intended to tell the user that important operating and servicing instructions are in the papers with the appliance.

WARNING :

To prevent damage which may result in fire or shock hazard, do not expose this apparatus to rain or moisture.

Do not place containers with water (flower vase, cups, cosmetics, etc.) above the set.

(including on shelves above, etc.)

WARNING :

1) To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualified service personnel.

2) Do not remove the grounding pin on the power plug. This apparatus is equipped with a three pin grounding-type power plug. This plug will only fit a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact an electrician. Do not defeat the purpose of the grounding plug.

Important Safety Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11) Only use attachments / accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15) To prevent electric shock, ensure the grounding pin on the AC cord power plug is securely connected.

English

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

FCC CAUTION:

To assure continued compliance, follow the attached installation instructions and use only the provided power supply cord. Any changes or modifications not expressly approved by Panasonic Corp. of North America could void the user’s authority to operate this device.

Declaration of Verification

Model No.

TH-80SF2HU, TH-70SF2HU

Responsible Party:

Panasonic Corporation of North America

Two Riverfront Plaza, Newark, New Jersey

07102-5490

Contact Source:

Panasonic System Communications Company of North America

1-877-655-2357

General Contact:

http://shop.panasonic.com/support

This device complies with Part 15 of the FCC Rules and all applicable IC RSS standards. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CANADIAN NOTICE:

This Class A digital apparatus complies with Canadian ICES-003.

WARNING:

Not for use in a computer room as defined in the

•

Standard for the Protection of Electronic Computer/ Data Processing Equipment, ANSI/NFPA 75.

For permanently connected equipment, a readily

•

accessible disconnect device shall be incorporated in the building installation wiring.

For pluggable equipment, the socket-outlet shall

•

be installed near the equipment and shall be easily accessible.

Note:

Image retention may occur. If you display a still picture for an extended period, the image might remain on the screen. However, it will disappear when a general moving picture is displayed for a while.

Trademark Credits

Microsoft, Windows and Internet Explorer are the

•

registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Macintosh, Mac, Mac OS, OS X and Safari are the

•

trademarks of Apple Inc. registered in the United States and other countries.

PJLink is a registered or pending trademark in Japan,

•

the United States, and other countries and regions.

HDMI, High-Definition Multimedia Interface and the

•

HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

JavaScript is a registered trademark or a trademark of

•

Oracle Corporation and its subsidiary and associated companies in the United States and/or other countries.

RoomView, Crestron RoomView and Fusion RV are

•

registered trademarks of Crestron Electronics, Inc. Crestron Connected is the trademark of Crestron Electronics, Inc.

LinkRay and LinkRay icon are trademarks of

•

Panasonic Corporation.

Even if no special notation has been made of company or product trademarks, these trademarks have been fully respected.

English

Important Safety Notice

WARNING

1) To prevent damage which may result in fire or shock hazard, do not expose this appliance to dripping or splashing.

Do not place containers with water (flower vase, cups, cosmetics, etc.) above the set. (including on shelves above, etc.)

No naked flame sources, such as lighted candles, should be placed on / above the set.

2) To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualified service personnel.

3) Do not remove the earthing pin on the power plug. This apparatus is equipped with a three pin earthing-type power plug. This plug will only fit an earthing-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact an electrician.

Do not defeat the purpose of the earthing plug.

4) To prevent electric shock, ensure the earthing pin on the AC cord power plug is securely connected.

CAUTION

This appliance is intended for use in environments which are relatively free of electromagnetic fields.

Using this appliance near sources of strong electromagnetic fields or where electrical noise may overlap with the input signals could cause the picture and sound to wobble or cause interference such as noise to appear.

To avoid the possibility of harm to this appliance, keep it away from sources of strong electromagnetic fields.

IMPORTANT INFORMATION

If a display is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

Using cabinets or stands recommended by the

•

manufacturer of the display.

Only using furniture that can safely support the

•

display.

Ensuring the display is not overhanging the edge

•

of the supporting furniture.

Not placing the display on tall furniture (for

•

example, cupboards or bookcases) without anchoring both the furniture and the display to a suitable support.

Not standing the displays on cloth or other

•

materials placed between the display and supporting furniture.

Educating children about the dangers of climbing

•

on furniture to reach the display or its controls.

WARNING:

This equipment is compliant with Class A of CISPR32.

In a residential environment this equipment may cause radio interference.

English

IMPORTANT: THE MOULDED PLUG

FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.

This display is supplied with a moulded three pin mains plug for your safety and convenience. A 10 amp fuse is fitted in this plug. Shall the fuse need to be replaced, please ensure that the replacement fuse has a rating of 10 amps and that it is approved by ASTA or BSI to BS1362.

Check for the ASTA mark the body of the fuse.

If the plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is replaced.

If you lose the fuse cover the plug must not be used until a replacement cover is obtained.

A replacement fuse cover can be purchased from your local Panasonic dealer.

Do not cut off the mains plug.

Do not use any other type of mains lead except the one supplied with this display.

The supplied mains lead and moulded plug are designed to be used with this display to avoid interference and for your safety.

If the socket outlet in your home is not suitable, get it changed by a qualified electrician.

If the plug or mains lead becomes damaged, purchase a replacement from an authorized dealer.

WARNING : — THIS DISPLAY MUST BE EARTHED

How to replace the fuse.

Open the fuse compartment with a screwdriver and replace the fuse.

or the BSI mark on

English

Safety Precautions

80-inch model

70-inch model

80-inch model

70-inch model

WARNING

■ Setup

This LCD Display is for use only with the following optional accessories.

Use with any other type of optional accessories may cause instability which could result in the possibility of injury.

Securely install the pedestal, an optional accessory. Ask an authorized dealer for installation.

The following number of people are required for installation.

: 4

: 2

Pedestal

•

TY-ST75PE9

Digital Interface Box

•

ET-YFB100G

DIGITAL LINK Switcher

•

ET-YFB200G

Early Warning Software

•

(Basic license/3-year license):

ET-SWA100 series*1

Video Wall Manager

•

TY-VUK10*2

1: Suffix of the part number may differ depending on

the license type.

2: Supports Ver1.8 or later.

Note

●

The part number of the optional accessories are subject to change without notice.

When installing the pedestal, read the operating instructions supplied with it carefully and install properly. Also, always use the overturn prevention accessories.

We are not responsible for any product damage, etc. caused by failures in the installation environment for the pedestal or wall-hanging bracket even during the warranty period.

Small parts can present choking hazard if accidentally swallowed. Keep small parts away from young children. Discard unneeded small parts and other objects, including packaging materials and plastic bags/sheets to prevent them from being played with by young children, creating the potential risk of suffocation.

Do not place the Display on sloped or unstable surfaces, and ensure that the Display does not hang over the edge of the base.

The Display may fall off or tip over.

•

Install this unit at a location with minimal vibration and which can support the weight of the unit.

Dropping or falling of the unit may cause injury or

•

malfunction.

Caution - For use only with UL Listed Wall Mount Bracket with minimum weight/load 62.0

When installing the display vertically, be sure that the power indicator comes to the downside.

Power indicator

If installed in different directions, heat is generated

•

and it may cause fire or damage to the Display.

Cautions for Wall or Pedestal Installation

The installation should be performed by an installation

•

professional. Installing the Display incorrectly may lead to an accident that results in death or serious injury. Use the optional Pedestal. (see page 6)

When installing on a wall, a wall hanging bracket that

•

conforms to VESA standards must be used.

: VESA 600 × 400

: VESA 400 × 400

(see page 9)

Before installation, be sure to check if the mounting

•

location has enough strength to support the weight of the display and the wall hanging bracket for anti drop.

If you terminate the use of the product, ask a

•

professional to remove it promptly.

When mounting the Display on the wall, prevent the

•

mounting screws and power cable from contacting metal objects inside the wall. An electric shock may occur if they contact metal objects inside the wall.

(135 lbs).

■ When using the LCD Display

The Display is designed to operate on 110 ‒ 127 or 220 ‒ 240 V AC, 50/60 Hz.

If problems or malfunction occur, stop using immediately.

If problems occur, unplug the power supply plug.

Smoke or an abnormal odour come out from the unit.

•

No picture appears or no sound is heard,

•

occasionally.

Liquid such as water or foreign objects got inside the

•

unit.

The unit has deformed or broken parts.

•

If you continue to use the unit in this condition, it could result in fire or electric shock.

Unplug the power supply plug from the wall outlet,

•

and then contact the dealer for repairs.

English

To cut off the power supply to this Display completely,

•

you need to unplug the power supply plug from the wall outlet.

Repairing the unit yourself is dangerous, and shall

•

never be done.

To enable to unplug the power supply plug

•

immediately, use the wall outlet which you can reach easily.

Do not touch the unit directly by hand when it is damaged.

Electric shock could occur.

•

Do not stick any foreign objects into the Display.

Do not insert any metal or flammable objects into the

•

ventilations holes or drop them onto the Display, as doing so can cause fire or electric shock.

Do not remove the cover (cabinet) or modify it.

High voltages which can cause fire or electric shocks

•

are present inside the Display. For any inspection, adjustment and repair work, please contact your local Panasonic dealer.

Ensure that the mains plug is easily accessible.

The mains plug shall be connected to a mains socket outlet with a protective earthing connection.

Do not use any power supply cord other than that provided with this unit.

Doing so may cause short-circuit, generates heat,

•

etc., which could cause electric shock or fire.

Do not use the supplied power supply cord with any other devices.

Doing so may cause short-circuit, generates heat,

•

etc., which could cause electric shock or fire.

Clean the power supply plug regularly to prevent it becoming dusty.

If there is a build up of dust on the plug, the resultant

•

humidity may cause short-circuit, which could cause electric shock or fire. Unplug the power supply plug from the wall outlet and wipe it with a dry cloth.

Do not handle the power supply plug with wet hands.

Doing so may cause electric shocks.

•

Securely insert the power supply plug (socket outlet side) and the power supply connector (main unit side) as far as it will go.

If the plug is not fully inserted, heat may be generated

•

which could cause fire. If the plug is damaged or the wall socket is loose, they shall not be used.

Do not do anything that may damage the power supply cord or the power supply plug.

Do not damage the cable, make any modifications

•

to it, place heavy objects on top of it, heat it, place it near any hot objects, twist it, bend it excessively or pull it. To do so may cause fire and electric shock. If the power cable is damaged, have it repaired at your local Panasonic dealer.

Do not touch the power supply cord or the plug directly by hand when they are damaged.

Doing so may cause electric shock or fire due to

•

short-circuit.

Keep the AAA/R03/LR03 batteries (supplied) out of reach of children. If accidentally swallowed, it will be harmful to the body.

Please contact a doctor immediately in case you

•

doubt that the child may have swallowed it.

To prevent the spread of fire, keep candles or other open flames away from this product at all times.

English

CAUTION

80-inch model

70-inch model

Do not place any objects on top of the Display.

Ventilation should not be impeded by covering

the ventilation openings with items such as newspapers, table cloths and curtains.

Doing so may cause the Display to overheat, which

•

can cause fire or damage to the Display.

For sufficient ventilation, see page 9.

Do not place the display where it may be affected by salt or corrosive gas.

Doing so may cause the display to fall due to

•

corrosion, and it may result in injury. Also, the unit may malfunction.

The following number of people are required to carry or unpack this unit.

: 4

: 2

If this is not observed, the unit may drop, resulting in

•

injury.

When disconnecting the power supply cord, always pull on the plug (socket outlet side) / the connector (main unit side).

Pulling the cord may damage the cord, and it may

•

cause electric shock or fire due to short-circuit.

Be sure to disconnect all cables and overturn prevention accessories before moving the Display.

If the Display is moved while some of the cables are

•

still connected, the cables may become damaged, and fire or electric shock could result.

Disconnect the power supply plug from the wall socket as a safety precaution before carrying out any cleaning.

Electric shocks can result if this is not done.

•

Do not step on, or hang from the display or the Pedestal.

They might tip over, or might be broken and it may

•

result in injury. Pay special attention to the children.

Do not reverse the polarity (+ and -) of the battery when inserting.

Mishandling the battery may cause its explosion

•

or leakage, resulting in fire, injury or damage to surrounding properties.

Insert the battery correctly as instructed. (see page

•

12)

Do not use batteries with the outer cover peeling away or removed.

Mishandling the batteries may cause the batteries

•

to short circuit, resulting in fire, injury or damage to surrounding properties.

Remove the batteries from the remote control transmitter when not using for a long period of time.

The battery may leak, heat, ignite or burst, resulting in

•

fire or damage to surrounding properties.

Remove exhausted batteries from the remote control immediately.

Leaving the batteries unattended in it may cause

•

battery leakage, heat or burst.

Do not burn or breakup batteries.

Batteries must not be exposed to excessive heat such

•

as sunshine, fire or the like.

Do not turn the Display upside down.

Do not position the unit with its liquid crystal panel facing upright.

English

Precautions for use

Cautions when installing

Do not set up the Display outdoors.

The Display is designed for indoor use.

•

Install this unit at a location which can support the weight of the unit.

Dropping or falling of the unit may cause injury.

•

Environmental temperature to use this unit

When using the unit where it is below 1 400 m

•

(4 593 ft) above sea level: 0 °C to 40 °C (32 °F to 104 °F)

When using the unit at high altitudes (1 400 m

•

(4 593 ft) and higher and below 2 800 m (9 186 ft) above sea level): 0 °C to 35 °C (32 °F to 95 °F)

Do not install the unit where it is 2 800 m (9 186 ft) and higher above sea level.

Failure to do so may shorten the life of the internal

•

parts and result in malfunctions.

We are not responsible for any product damage, etc. caused by failures in the installation environment even during the warranty period.

Transport only in upright position!

Transporting the unit with its liquid crystal panel

•

facing upright or downward may cause damage to the internal circuitry.

Do not grab the liquid crystal panel.

Do not forcibly press the liquid crystal panel, or push

•

it with a pointed object. Applying a strong force to the liquid crystal panel will cause unevenness of the screen display, resulting in malfunction.

Do not install the product to a place where the product is exposed to direct sunlight.

If the unit is exposed to direct sunlight even indoors,

•

the temperature rise of the liquid crystal panel may cause malfunction.

Required space for ventilation

When using the pedestal, leave a space of 10 cm

•

(3 15/16”) or more at the top, left and right, and 5 cm

31/32”) or more at the rear, and also keep the space

(1 between the bottom of the display and the table surface.

If using some other setting-up method (wall-hanging, etc.), follow the manual of it. (If there is no specific indication of installation dimension in the installation manual, leave a space of 10 cm (3 the top, bottom, left and right, and 5 cm (1 31/32”) or more at the rear.)

15/16”) or more at

Minimum distance:

a: 10 cm

15/16”)

b: 5 cm

31/32”)

Operation of this unit is guaranteed up to an ambient

•

temperature of 40 °C (104 °F). When installing the unit in a case or chassis, be sure to provide adequate ventilation with a cooling fan or ventilation hole so that the surrounding temperature (inside the case or chassis) including the temperature of the front surface of the liquid crystal panel can be kept at 40 °C (104 °F) or less.

About the screws used when using a wall hanging

bracket that conforms to VESA standards

Inch

model

Screw pitch for

installation

Depth of

screw hole

Screw

(quantity)

80 600 mm × 400 mm 12 mm M6 (4)

70 400 mm × 400 mm 12 mm M6 (4)

When using

Be careful of the movable structure of the power indicator and remote control sensor.

As factory default, the power indicator and remote

•

control sensor are stored in the main unit. For normal use, pull out the remote control sensor from the edge side of the main unit by operating the lever on the rear panel. Depending on the setup condition such as when using the multi display, store the remote control sensor in the main unit. (see page 17)

Depending on the temperature or humidity conditions, uneven brightness may be observed. This is not a malfunction.

This unevenness will disappear while applying current

•

continuously. If not, consult the distributor.

If the Display is not going to be used for any prolonged length of time, unplug the power supply plug from the wall outlet.

Picture noise may occur if you connect / disconnect the cables connected to the input terminals you are currently not watching, or if you turn the power of the video equipment on / off, but it is not a malfunction.

English

+ 18 hidden pages