PANASONIC TH-42PW4RZ, TH-37PW4HZ, TH-37PW4RZ, TH-37PW4AZ User Manual

Wide Plasma Display
®
PLASMA DISPLAY
+
L O V
T
U P N I
Y B D
N A
/
T S
R
R
N
E
O
W
R E
O P
W O P
G
Operating Instructions
TH-37PW4
Model No.
TH-42PW4
Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference.
English
TQBC0293-1
Dear Panasonic Customer
Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new Plasma Display. To obtain maximum benefit from your set, please read these Instructions bef ore ma kin g any adjustments, and retain them for future reference. Retain your purchase receipt also, and note down the model number and serial number of your set in the space provided on the rear cover of these instructions.
Visit our Panasonic Web Site http://www.panasonic.co.jp/global/
Trademark Credits
VGA is a trademark of International Business Machines Corporation.
S-VGA is a registered trademark of the AV Electronics Standard Association.
Even if no special notation has been made of company or product trademarks, these trademarks have been fully respected.
Note:
Do not allow a still picture to be displayed for an extended period, as this can cause a permanent after-image to remain on the Plasma Display. Examples of still pictures include logos, video games, computer images, teletext and images displayed in 4:3 mode.
2
Table of Contents
Important Safety Notice..............................................4
Safety Precautions......................................................5
Accessories .................................................................7
Accessories Supply....................................................7
Optional Accessories .................................................7
Remote Control Batteries...........................................8
Connections ................................................................9
A V Input Terminals connection.................................10
Component/RGB Input connection ..........................11
How to connect the PC Input Terminals ...................13
How to connect the SERIAL Terminals ....................14
Basic Controls...........................................................15
Power On/Off and input signal selection ................16
AC cord connection..................................................16
Power On/Off ...........................................................16
Select the input signal..............................................17
Selecting the On-Screen Menu Language...............17
On screen Menu Display from Remote Control......18
ASPECT Controls......................................................20
Adjusting Picture Pos./Size .....................................22
Sound Adjustment ....................................................24
Mute .........................................................................24
Surround Controls ....................................................25
Picture Adjustments .................................................26
Screensaver (For preventing after-images) ............28
Side panel Adjustment .............................................29
Setup for input signals .............................................30
Component/RGB-in select .......................................30
3D Y/C Filter – For NTSC video images ..................30
Colour system / Panasonic Auto..............................31
[Sync] .......................................................................32
[Pull-in range]...........................................................32
[Clamp position] .......................................................32
[H-Freq. (kHz)/V-Freq. (Hz)] .....................................32
Troubleshooting ........................................................33
Specifications............................................................34
3
Important Safety Notice
WARNING: To prevent damage which may result in fire or shock hazard, do not expose this appliance to
rain or moisture. Do not place containers with water (flower vase, cups, cosmetics, etc.) above the set. (including on shelves above, etc.)
WARNING: 1) To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing
to qualified service personnel.
2) Do not remove the earthing pin on the power plug. This apparatus is equipped with a three pin earthing-type power plug. This plug will only fit an earthing-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact an electrician. Do not defeat the purpose of the earthing plug.
WARNING
This is a class A product. In a domestic environment this product may cause radio interference in which case you may be required to take adequate measures.
CAUTION
This appliance is intended for use in environments which are relatively free of electromagnetic fields. Using this appliance near sources of strong electromagnetic fields or where electrical noise may overlap with the input signals could cause the picture and sound to wobble or cause interference such as noise to appear. To avoid the possibility of harm to this appliance, keep it away from sources of strong electromagnetic fields.
To prevent electric shock, ensure the grounding pin on the AC cord power plug is securely connected.
4
Safety Precautions
WARNING
Setup
This Plasma Display is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury.
(All of the following accessories are manufactured by Matsushita Electric Industrial Co., Ltd.)
Speakers......................................... TY-SP37P4W-S(TH-37PW4), TY-SP42PM3W(TH-42PW4)
Pedestal ..........................................TY-ST42PT3-S
Wall stand .......................................TY-ST42PW1
Mobile stand.................................... TY-ST42PF3(TH-42PW4)
Wall-hanging bracket (vertical)........TY-WK37PV3(TH-37PW4), TY-WK42PV1(TH-42PW4)
Wall-hanging bracket (angled) ........TY-WK42PR1(TH-42PW4)
Ceiling unit ......................................TY-CE42PS1
Always be sure to ask a qualified technician to carry out set-up.
Do not place the Plasma Display on sloped or unstable surfaces.
The Plasma Display may fall off or tip over.
Do not place any objects on top of the Plasma Display.
If water is spills onto the Plasma Display or foreign objects get inside it, a short-circuit may occur which could
result in fire or electric shock. If any foreign objects get inside the Plasma Display, please consult your local Panasonic dealer.
If using the pedestal (optional accessory), leave a space of at least 10 cm at the top, left and right, at least 6 cm at the bottom, and at least 7 cm at the rear. If using some other setting-up method, leave a space of a least 10 cm at the top, bottom, left and right, and at least 1.9 cm at the rear.
Avoid installing this product near electronic equipment that generates electromagnetic waves.
It will cause interference in image, sound, etc. In particular, keep video equipment away from this product.
When using the Plasma Display
The Plasma Display is designed to operate on 220 - 240 V AC, 50/60 Hz. Do not cover the ventilation holes.
Doing so may cause the Plasma Display to overheat, which can cause fire or damage to the Plasma Display.
Do not stick any foreign objects into the Plasma Display.
Do not insert any metal or flammable objects into the ventilations holes or drop them onto the Plasma Display,
as doing so can cause fire or electric shock.
Do not remove the cover or modify it in any way.
High voltages which can cause severe electric shocks are present inside the Plasma Display . For any
inspection, adjustment and repair work, please contact your local Panasonic dealer.
Securely insert the power cord plug as far as it will go.
If the plug is not fully inserted, heat may be generated which could cause fire. If the plug is damaged or the wall
socket plate is loose, they shall not be used.
Do not handle the power cord plug with wet hands.
Doing so may cause electric shocks.
Do not do anything that may damage the power cable. When disconnecting the power cable, pull on the plug body, not the cable.
Do not damage the cable, make any modifications to it, place heavy objects on top of it, heat it, place it near
any hot objects, twist it, bend it excessively or pull it. To do so may cause fire and electric shock. If the power cable is damaged, have it repaired at your local Panasonic dealer.
If the Plasma Display is not going to be used for any prolonged length of time, unplug the power cord plug from the wall outlet.
5
Safety Precautions
If problems occur during use
If a problem occurs (such as no picture or no sound), or if smoke or an abnormal odour starts to come out from the Plasma Display, immediately unplug the power cord plug from the wall outlet.
If you continue to use the Plasma Display in this condition, fire or electric shock could result. After checking that
the smoke has stopped, contact your local Panasonic dealer so that the necessary repairs can be made. Repairing the Plasma Display yourself is extremely dangerous, and shall never be done.
If water or foreign objects get inside the Plasma Display, if the Plasma Display is dropped, or if the cabinet becomes damages, disconnect the power cord plug immediately.
A short circuit may occur, which could cause fire. Contact your local Panasonic dealer for any repairs that need
to be made.
CAUTION
When using the Plasma Display
Do not bring your hands, face or objects close to the ventilation holes of the Plasma Display .
Heated air comes out from the ventilation holes at the top of Plasma Display will be hot. Do not bring your hands
or face, or objects which cannot withstand heat, close to this port, otherwise burns or deformation could result.
Be sure to disconnect all cables before moving the Plasma Display.
If the Plasma Display is moved while some of the cables are still connected, the cables may become damaged,
and fire or electric shock could result.
Disconnect the power cord plug from the wall socket as a safety precaution before carrying out any cleaning.
Electric shocks can result if this is not done.
Clean the power cable regularly to prevent it becoming dusty.
If dust built up on the power cord plug, the resultant humidity can damage the insulation, which could result in
fire. Pull the power cord plug out from the wall outlet and wipe the mains lead with a dry cloth.
Cleaning and maintenance
The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lint-free cloth.
If the surface is particularly dirty, wipe with a soft, lint-free cloth which has been soaked in pure water or water
to which a small amount of neutral detergent has been added, and then wipe it evenly with a dry cloth of the same type until the surface is dry. Do not scratch or hit the surface of the panel with fingernails or other hard objects, otherwise the surface may
become damaged. Furthermore, avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the surface may be adversely affected.
If the cabinet becomes dirty, wipe it with a soft, dry cloth.
If the cabinet is particularly dirty, soak the cloth in water to which a small amount of neutral detergent has been
added and then wring the cloth dry. Use this cloth to wipe the cabinet, and then wipe it dry with a dry cloth. Do not allow any detergent to come into direct contact with the surface of the Plasma Display .
If water droplets get inside the unit, operating problems may result. Avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the
cabinet surface may be adversely affected or the coating may peel off. Furthermore, do not leave it for long periods in contact with articles made from rubber or PVC.
6
Accessories
Accessories Supply
Check that you have the accessories and items shown
Operating Instruction book
Remote Control Transmitter EUR646525
Guarantee Card
AC cord
Optional Accessories
INPUT
SURROUND
VOL
NR
PICTURE
SET UP
SOUND
PICTURE POS. /SIZE
ASPECT
OFF TIMER
PC
PLASMA DISPLAY
Fixing bands TMME187 × 2
Batteries for the Remote Control Transmitter (2 × R6 Size)
Ferrite core J0KF00000018 × 2
Speakers
TY-SP37P4W-K(TH-37PW4) TY-SP42PM3W(TH-42PW4)
Wall-hanging bracket
(vertical) TY-WK37PV3(TH-37PW4)
TY-WK42PV1(TH-42PW4)
Pedestal
TY-ST42PT3-S
Wall-hanging bracket
(angled) TY-WK42PR1(TH-42PW4)
Wall stand
TY-ST42PW1
Ceiling unit
TY-CE42PS1
Mobile stand TY-ST42PF3(TH-42PW4)
For assembling
Full instructions are supplied with each optional accessory for use with this Plasma Display.
7
Remote Control Batteries
Requires two R6 batteries.
1. Turn the transmitter face down. Press and slide off the battery cover.
2. Install the batteries as shown in the battery compartment. (Polarity + or – must match the markings in the compartment).
3. Replace the cover and slide in reverse until the lock snaps.
Two "R6" size
Helpful Hint:
For frequent remote control users, replace old batteries with Alkaline batteries for longer life.
Precaution on battery use
Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter.
Observe the following precaution:
1. Batteries shall always be replaced as a pair. Always use new batteries when replacing the old set.
2. Do not combine a used battery with a new one.
3. Do not mix battery types (example: Zinc Carbon with “Alkaline”).
4. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.
5. Battery replacement is necessary when remote control acts sporadically or stops operating the Plasma Display set.
8
Connections
When connecting the speakers, be sure to use only the optional accessory speakers. Refer to the speakers Installation Manual for details on speaker installation.
1
Speakers (Optional accessories)
2
1
2
SPEAKERS Terminals (R)
SPEAKERS Terminals (L)
Cable fixing bands
Secure any excess cables with bands as required.
Pass the attached cable fixing band through the clip as shown in the figure.
To secure cables connected to Terminals, wrap the cable fixing band around them then pass the pointed end through the locking block, as shown in the figure.
1
To tighten:
Pull
2
To loosen:
Push the catch
Pull
AV IN Terminals (see page 10, 11)
RL
AUDIO
S VIDEOVIDEO
RL
AUDIO
COMPONENT/RGB IN and Audio IN Terminals (see page 11, 12 )
AUDIO
HD
VD
COMPONENT/RGB INAV IN
From EXIT monitor Terminal on Computer (see page 13)
PR/CR/R
P
B/CB
/B Y/G
PC IN SERIAL
From SERIAL Terminal on Computer (see page 14)
9
Connections
AV Input Terminals connection
Connect the signal source equipment. (Example) When connecting an S VIDEO VCR
(S VIDEO VCR)
2×RCA audio
cables
AUDIO
Audio input to
L/R sockets
Audio
OUT
RL
RL
AUDIO
AV IN
Video
OUT
S Video
OUT
S VIDEO
Video input to
S VIDEO
socket
S VIDEOVIDEO
S VIDEO 4 pin socket
Luminance earth
Luminance in
Chrominance earth
Chrominance in
(Example) When connecting 3×RCA audio video cables.
(VCR)
Audio
OUT
RL
Video
OUT
AUDIO-VIDEO
Video input to
RCA socket
3×RCA audio
video cables
Audio input to
L/R sockets
Note:
Additional equipment and cables shown are not supplied with this set.
RL
AUDIO
AV IN
S VIDEOVIDEO
10
(Example) When connecting 21 pin scart cables.
(VCR)
AV2
Connections
Video input to BNC socket
BNC-RCA adaptor plug
Audio input to
(DVD / Satellite Receiver)
AV1/TV
L/R sockets
RL
AUDIO
Video input to RCA socket
Audio input to L/R sockets
Notes:
(1) Additional equipment, cables and an adapter plug shown are not supplied with this set. (2) 21 pin connectors and 21 pin scart plugs are connectors used in Europe.
S VIDEOVIDEO
AV IN
Component/RGB Input connection
Component signals (Y, PB, PR) connection
(DVD Player)
Y
Y, PB, P
P
B
P
R
L
R
3×RCA video cables
AUDIO
2×RCA audio cables
Notes:
(1) Change the Component/RGB-in setting in the Setup enu to Component. (see page 30, 32) (2) Additional equipment and cables shown are not supplied with this set.
R
RL
AUDIO
HD
VD
PR/CR/R
COMPONENT/RGB IN
P
B/CB
/B Y/G
11
Loading...
+ 25 hidden pages