Panasonic TC-P42X60, TC-P50X60 User Manual
Scan, watch and discover how
to get the most out of your TV
Escanee, observe y escubra como
obtener el máximo de su TV
http://SCN.BY/
9T9AB0HTW8JBK3
Owner’s Manual
42”/50” Class 720p Plasma
HDTV
(41.9/49.9 inches measured diagonally)
Manual de usuario
Televisión de alta definición de
720p y clase 42”/50” de Plasma
(41,9/49,9 pulgadas medidas
diagonalmente)
For assistance (U.S.A./Puerto Rico), please call:
1-877-95-VIERA (958-4372)
www.panasonic.com/help
For assistance (Canada), please call:
1-866-330-0014
concierge.panasonic.ca
Para solicitar ayuda (EE.UU./Puerto Rico), llame al:
1-877-95-VIERA (958-4372)
www.panasonic.com/help
Model No.
Número de modelo
TC-P42X60
TC-P50X60
Register online at
www.panasonic.com/register
(U.S. customers only)
English
Español
Thank you for purchasing this Panasonic product.
Please read these instructions before operating your set and
retain them for future reference. The images shown in this
manual are for illustrative purposes only.
Gracias por su decisión de comprar este producto marca Panasonic.
Lea estas instrucciones antes de utilizar su televisor y guárdelas
para consultarlas en el futuro. Las imágenes mostradas en este
manual tienen solamente fines ilustrativos.
TQB2AA0705
This product incorporates the following software:
(1) the software licensed under the GNU General Public License, Version 2.0 (GPL V2.0) and/or,
(2) open sourced software other than the software licensed under the GPL.
The software categorized as (1) - (2) are distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY, without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
PURPOSE. Please refer to the detailed terms and conditions thereof shown in the "License" menu on this
product.
At least three (3) years from delivery of this product, Panasonic Corporation will give to any third party who
contacts us at the contact information provided below, for a charge no more than our cost of physically
performing source code distribution, a complete machine-readable copy of the corresponding source code
covered under GPL V2.0 or the other licenses with the obligation to do so, as well as the respective copyright
notice thereof.
Contact Information:cdrequest@unipf.jp
The source code and the copyright notice are also available for free in our website below.
http://www.unipf.jp/dl/DTV13UM/
This product is licensed under the AVC patent portfolio license for the personal and non-commercial use of
a consumer to (i) encode video in compliance with the AVC Standard (“AVC Video”) and/or (ii) decode AVC
Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was
obtained from a video provider licensed to provide AVC Video. No license is granted or shall be implied for
any other use. Additional information may be obtained from MPEG LA, LLC.
See http://www.mpegla.com.
■Do not display a still picture for a long time
This causes the image to remain on the plasma screen (“Image retention”).
This is not considered a malfunction and is not covered by the warranty.
4 : 3
Typical still images
Channel number and other logos
●
Image displayed in 4:3 mode
●
Photo ●Video game
●
12
To prevent the “Image retention”, the screen
saver is automatically activated after a
few minutes if no signals are sent or no
operations are performed.
■Set up
Do not place the unit where it’s exposed to sunlight or other bright light (including reflections).
●
Use of some types of fluorescent lighting may reduce the remote control’s transmission range.
●
2
HDMI, the HDMI logo and
High-Definition Multimedia
Interface are trademarks
or registered trademarks
of HDMI Licensing LLC in
the United States and other
countries.
Manufactured under license
under U.S. Patent Nos:
5,956,674; 5,974,380;
6,487,535 & other U.S.
and worldwide patents
issued & pending. DTS,
the Symbol, & DTS and
the Symbol together are
registered trademarks &
DTS 2.0+Digital Out is a
trademark of DTS, Inc.
Product includes software.
© DTS, Inc. All Rights
Reserved.
Manufactured under
license from Dolby
Laboratories. Dolby and
the double-D symbol
are trademarks of Dolby
Laboratories.
Contents
Please read before using the unit
Safety Precautions ······························· 4
•
Getting started
Accessories/Optional Accessory ··········8
•
Connections ········································11
•
Identifying Controls ····························13
•
First Time Setup ································· 15
•
Basic Features
Watching TV ······································· 16
•
Watching content from external devices
•
Using Media player ····························20
•
Advanced Features
How to Use Menu Functions ·············· 21
•
··· 19
Getting started
Basic Advanced Support Information
Support Information
Technical Information ························· 26
•
Care and Cleaning ····························· 31
•
Frequently Asked Questions (FAQ) ··· 32
•
Specifications ····································· 34
•
Index ·················································· 35
•
Limited Warranty
•
(for U.S.A. and Puerto Rico only) ······· 36
Customer Services Directory
•
(for U.S.A. and Puerto Rico) ··············37
Limited Warranty (for Canada) ··········· 38
•
3
Safety Precautions
CAUTION
RISK OF ELECTRIC SHOCK
WARNING: To reduce the risk of electric shock, do not remove cover or back.
No user-serviceable parts inside. Refer servicing to qualified service personnel.
DO NOT OPEN
The lightning flash with arrowhead
within a triangle is intended to tell the
user that parts inside the product are a
risk of electric shock to persons.
The exclamation point within a
triangle is intended to tell the
user that important operating and
servicing instructions are in the
papers with the appliance.
WARNING:
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or
moisture.
Do not place liquid containers (flower vase, cups, cosmetics, etc.) above the set
(including on shelves above, etc.).
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9) Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has
two blades with one wider than the other. A
grounding type plug has two blades and a
third grounding prong. The wide blade or the
third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete
outlet.
10) Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11) Only use attachments / accessories specified by
the manufacturer.
12) Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer, or sold with
the apparatus. When a cart is
used, use caution when moving
the cart / apparatus combination
to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or
when unused for long periods of time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as powersupply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or
moisture, does not operate normally, or has been
dropped.
15) To prevent electric shock, ensure the grounding
pin on the AC cord power plug is securely
connected.
4
WARNING/CAUTION (TV set)
WARNING
Small parts can present choking hazard if
accidentally swallowed.
Keep small parts away from young children.
Discard unneeded small parts and other objects,
including packaging materials and plastic bags/
sheets to prevent them from being played with
by young children, creating the potential risk of
suffocation.
■Set up
This Plasma TV may fall and can cause personal
injury or even death if not installed correctly. To
prevent personal injury or death, follow these
warnings:
Install the Plasma TV in accordance with
●
the manufacturer’s recommended pedestal
or stand, corresponding hardware and
installation instructions.
This Plasma TV is for use only with the following
optional accessories. Use with any other type
of optional accessories may cause instability.
The following accessories are manufactured by
Panasonic Corporation.
• Wall-hanging bracket (Angled)
TY-WK4P1RW
Be sure to ask a qualified technician to carry
●
out the installation and set-up.
Two or more people are required to install or
remove the television.
Some wall mounts (wall-hanging brackets) are
●
not designed to be mounted to walls with steel
studs or old cinder block constructions.
Ask your dealer or licensed contractor to properly
secure the wall-hanging bracket.
Do not route the TV’s power cord inside the
●
wall.
The power cord was not designed for in-wall
mounting.
Doing so can lead to fire hazard.
Do not place the Plasma TV or its stand on a
●
sloped or unstable surface.
The Plasma TV may fall or tip over.
Do not support the Plasma TV on a non-
●
specified pedestal.
Do not place the Plasma TV on furniture that
●
can easily be used as steps, such as a chest of
drawers.
Do not climb or allow children to climb on the
●
Plasma TV
Place or install the Plasma TV where it cannot
●
be pushed, pulled over or knocked down.
Route all cords and cables such that they
●
cannot be tripped over or pulled by curious
children.
Do not place any objects on top of the Plasma
●
TV.
If water spills onto the Plasma TV or foreign
objects get inside it, a short-circuit may occur,
which could result in fire or electric shock. If any
foreign objects get inside the Plasma TV, please
consult an Authorized Service Center.
In the unlikely event that you receive a shock
●
from this product, it is possible that your
household outlet may be wired improperly.
Have an electrician verify that the TV’s outlet is
properly wired. If the problem persists, have the
TV serviced by a qualified authorized technician.
To prevent the spread of fire, keep
●
candles or other open flames away
from this product at all times
■AC Power Supply Cord
To prevent fire or electric shock:
The Plasma TV is designed to operate on a 120
●
V AC, 60 Hz service. Insert the power cord plug
as far as it will go into the wall socket.
If the plug is not fully inserted, heat may generate,
which could cause a fire.
The included power cord is for use with this
●
unit only.
Do not use any power cord other than that
●
provided with this TV.
Do not handle the power cord plug with wet
●
hands.
Do not do anything that might damage the
●
power supply cord.
When disconnecting the power supply cord,
●
hold the plug, not the cord.
Do not use the power supply cord if the plug or
●
cord is damaged.
Replace the cord or contact your Authorized
Service Center.
Do not use a 3-prong to 2-prong AC plug
●
adapters to connect your TV’s plug to the wall
outlet.
Doing so will defeat the TV plug’s safety feature,
which can lead to a shock hazard. If the wall outlet
does not accommodate a 3-prong plug, have a
qualified electrician replace your outlet and check
the associated wiring.
■Handling the power supply cord
Insert the power plug fully into the socket
●
outlet. (If the power plug is loose, it could
generate heat and cause fire.)
Ensure that the power plug is easily
●
accessible.
Ensure the earth pin on the power plug is
●
securely connected to prevent electrical shock.
• An apparatus with CLASS I construction shall
be connected to a power socket outlet with a
protective earthing connection.
Do not touch the power plug with a wet hand.
●
(This may cause electrical shock.)
Do not use any power cord other than that
●
provided with this TV. (This may cause fire or
electrical shock.)
5
Do not damage the power cord. (A damaged
●
cord may cause fire or electrical shock.)
• Do not move the TV with the cord plugged in the
socket outlet.
• Do not place a heavy object on the cord or place
the cord near a high-temperature object.
• Do not twist the cord, bend it excessively, or
stretch it.
• Do not pull on the cord. Hold onto the power
plug body when disconnecting cord.
• Do not use a damaged power plug or socket
outlet.
If a problem occurs (such as no picture or
●
no sound), or if smoke or an abnormal odor
is detected from the Plasma TV, unplug the
power supply cord immediately.
Continued use of the TV under these conditions
might cause a fire or permanent damage to the TV.
Have the TV evaluated by an Authorized Service
Center. Servicing of the TV by unauthorized
personnel is strongly discouraged due to its high
voltage.
If water or an object gets inside the Plasma TV,
●
if the Plasma TV is dropped, or if the enclosure
becomes damaged, unplug the power supply
cord immediately.
A short-circuit may occur, which could cause a
fire. Contact an Authorized Service Center for an
evaluation.
CAUTION
Do not cover the ventilation holes.
●
Doing so may cause the Plasma TV to overheat,
which can cause a fire or damage to the Plasma
TV.
Leave a space of 3 15/16” (10 cm) or more at
●
the top, left and right, and 2 3/4” (7 cm) or more
at the rear.
When using the pedestal, keep the space
●
between the bottom of the TV and the pedestal
or stand surface clear from objects that may
obstruct ventilation.
■When Moving the Plasma TV
Be sure to disconnect all cables before moving
●
the Plasma TV.
Moving the TV with its cables attached might
damage the cables which, in turn, can cause fire
or electric shock.
To prevent an electric shock, disconnect the
●
power plug from the wall outlet as a safety
precaution before carrying out any cleaning.
Transport only in upright position.
●
Transporting the unit with its display panel facing
upright or downward may cause damage to the
internal circuitry.
Using a dry cloth, clean any dust from the
●
power supply cord and plug regularly.
Build-up of dust on the power cord plug can
increase humidity, which might damage the
insulation and cause a fire.
This Plasma TV radiates infrared rays;
therefore, it may affect other infrared
communication equipment. Install your infrared
sensor in a place away from direct or reflected
light from your Plasma TV.
The TV will still consume some power as long as
the power supply cord is connected to the wall
outlet.
Display panel is made of glass. Do not apply
●
strong force or impact to the display panel.
This may cause damage resulting in injury.
The TV is heavy. TV should be handled by 2 or
●
more people. Support as shown below to avoid
injury by the TV from tipping or falling.
6
CEA CHILD SAFETY NOTICES
WARNING
Flat panel displays are not always supported on
the proper stands or installed according to the
manufacturer’s recommendations. Flat panel
displays that are inappropriately situated on dressers,
bookcases, shelves, desks, speakers, chests or carts
may fall over and may cause personal injury or even
death.
The consumer electronics industry (of which
Panasonic is a member) is committed to making
home entertainment enjoyable and safe. To prevent
personal injury or death, be sure to follow the
following safety guidelines:
TUNE INTO SAFETY:
• One size does NOT fit all. Follow the
manufacturer’s recommendations for the safe
installation and use of your flat panel display.
• Carefully read and understand all enclosed
instructions for proper use of this product.
• Don’t allow children to climb on or play with
furniture and television sets.
• Don’t place flat panel displays on furniture that
can easily be used as steps, such as a chest of
drawers.
• Remember that children can become excited while
watching a program, especially on “larger than life”
flat panel displays. Care should be taken to install
the display where it cannot be pushed, pulled over,
or knocked down.
• Care should be taken to route all cords and cables
connected to the flat panel display so that they
cannot be pulled or grabbed by curious children.
WALL MOUNTING: IF YOU DECIDE TO WALL
MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS:
• Use a mount that has been recommended by
the display manufacturer and/or listed by an
independent laboratory (such as UL, CSA, ETL).
• Follow all instructions supplied by the display and
wall mount manufacturers.
• If you have any doubts about your ability to safely
install your flat panel display, contact your retailer
about professional installation.
• Make sure the wall where you are mounting the
display is appropriate. Some wall mounts are not
designed to be mounted to walls with steel studs
or old cinder block construction. If you are unsure,
contact a professional installer.
• A minimum of two people are required for
installation. Flat panel displays can be heavy.
Panasonic recommends that a qualified installer
perform the wall-mount installation. See page 5.
The American Academy of Pediatrics
discourages media viewing for children
younger than two years. For more details, see
www.aap.org.
FCC STATEMENT
This equipment has been tested and found to comply with the limits for an Other Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the Panasonic Service Center or an experienced radio/TV technician for help.
FCC Caution:
To assure continued compliance, follow the attached installation instructions and use only shielded
interface cables when connecting to peripheral devices. Some recommended user provided interface
cables may require usage of the attached ferrite core kit(s), refer to interface cable connection
instructions for details. Any changes or modifications not expressly approved by Panasonic Corp. of
North America could void the user's authority to operate this device.
Responsible Party: Panasonic Corporation of North America
One Panasonic Way, Secaucus, NJ 07094
Contact Source: Panasonic Consumer Marketing Company of North America
1-877-95-VIERA (958-4372)
email: consumerproducts@panasonic.com
7
Accessories/Optional Accessory
Accessories
Check if you have all of the items shown below.
Remote Control
N2QAYB000820
Batteries (2)
AA Battery
Power cord
Ferrite core
Owner’s Manual
Pedestal
for HDMI cable (2)
Quick start guide
Child safety
Product Registration Card
(U.S.A.)
Assembly (p. 9)
Optional Accessory
Please contact your nearest Panasonic dealer to purchase the recommended optional accessories. For
additional details, please refer to the optional accessories installation manual.
Wall-hanging bracket
TY-WK4P1RW
●
a: 15.7” (400 mm)
b: 11.8” (300 mm)
The angle of wall-hanging
bracket can be adjusted in
“zero tilting (vertical)” and
“5, 10 or 15-degree tilting”
for this TV.
Rear of the TV
a
Holes for wall-hanging
bracket installation
Screw for attaching the TV to the wallhanging bracket (not supplied with the TV)
(View from the side)
b
Depth of screw:
minimum 0.67” (17.0 mm),
maximum 1.38” (35.0 mm)
M8
Warning
In order to maintain the TV’s performance and safety, be absolutely sure to ask your dealer or a
●
licensed contractor to secure the wall-hanging brackets.
Carefully read the instructions accompanying optional accessories, and be absolutely sure to take
●
steps to prevent the TV from tipping over.
Handle the TV carefully during installation since subjecting it to impact or other forces may cause product
●
damage.
Take care when fixing wall brackets to the wall. Always ensure that there are no electrical cables or
●
pipes in the wall before hanging bracket.
When using the angled-type wall hanging bracket, please ensure that there is sufficient space for the
●
connecting cables not to press against the wall when the TV is tilted forward.
For safety reasons, remove units no longer being used from their wall-mounted locations.
●
8
Attaching the pedestal to TV
■
Assembling the pedestal
Fix securely with assembly screws A (Total 4 screws).
Tighten screws firmly.
A
Pole
R
L
Pole
Base
Front
■
Set-up
Tighten assembly screws B (total 4 screws) loosely at first,
then tighten them firmly to fix securely.
Bottom view
Accessories
Assembly screws
(4 of each)
A
size (M5 × 18)
B
size (M5 × 30)
Poles (2)
Getting started
L
L
or R is printed at the
bottom of the poles.
Base (1)
R
Arrow
mark
Pole
Work on a flat surface
Pole
Base
Rear side
B
Hole for pedestal
installation
Fix securely with assembly
screws B (Total 4 screws).
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall hanging bracket or repacking the TV.
Remove the assembly screws B from the TV.
Lift the TV from the pedestal.
Remove the assembly screws A from the pole.
Warning
Do not disassemble or modify the pedestal.
Otherwise, the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any pedestal other than that provided with this TV.
Otherwise, the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
If you use the pedestal when it is physically damaged, personal injury may result. Contact your
nearest Panasonic Dealer immediately.
During set-up, make sure that all screws are securely tightened.
If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal
will not be strong enough to support the TV, and it might fall over and become damaged, and personal
injury may result.
When removing the pedestal, do not remove the pedestal by any methods other than the specified
procedure. (above)
Otherwise, the TV and/or pedestal may fall over and become damaged, and personal injury may result.
Accessories/Optional Accessory
9
Power cord connection
To attach To remove
Insert it firmly until the
tabs on both sides click
into place.
Keep pushing both
sides until they snap
and pull.
Installing the remote’s batteries
Caution
Incorrect installation may cause battery
leakage and corrosion, resulting in
damage to the remote control.
Do not mix old and new batteries.
•
Do not mix different battery types (such
•
as alkaline and manganese batteries).
Do not use rechargeable (Ni-Cd)
•
batteries.
Do not burn or break batteries.
Hook
Open
Note the correct polarity
(+ or -).
Close
Attaching Ferrite Core
Be sure to attach the provided ferrite core to the HDMI cable (not supplied) to reduce interference or
electrical noise.
Attach the ferrite core as close as possible to connector on the TV side as shown.
10
Close the ferrite core until it clicks.
Connections
Connection Panels
DIGITAL AUDIO OUT
CB
A
* See page 10
(Power cord
connection)
Power Cord
Connect after all other
connections have been
made.
Back of the TV
Back of the TV
USB
connector
Antenna or Cable connection
VHF/UHF Antenna
Cable TV
VHF/UHF Antenna
• NTSC (National Television System Committee): Analog television system
ATSC (Advanced Television Systems Committee):
Digital TV Standards include digital high-definition television (HDTV), standarddefinition television (SDTV), data broadcasting, multi-channel surround sound
audio and interactive television.
or
Getting started
Connections
Accessories/Optional Accessory
Cable
You need to subscribe to a cable TV service to enjoy viewing their programming.
●
A high-definition connection can be made using an HDMI or Component Video cable. (p. 12)
●
Note
When using a Cable box, external equipment and video cables shown in this manual are not supplied
●
with the TV.
When disconnecting the power cord, be absolutely sure to disconnect the power cord plug from the
●
wall outlet first.
For additional assistance, visit us at: www.panasonic.com/help
●
www.panasonic.ca
11
AV cable connection
Best
Good
Basic
(Not HD)
To use HDMI terminals
Connect to Audio
input terminal
HDMI connection
(p. 29)
HDMI-DVI
Conversion cable
To use COMPONENT terminals
red
blue
green
white
red
To use COMPOSITE terminals
yellow
white
green
blue
red
white
red
yellow
white
red
HDMI
AV OUT
DVI OUT
L
AUDIO OUT
R
Y
green
B
P
blue
PR
red
L
white
R
red
yellow
L
white
R
red
COMPONENT
VIDEO OUT
AUDIO
OUT
COMPOSITE
OUT
AV Equipment
e.g. Blu-ray Disc
player
AV Equipment
e.g. Blu-ray Disc
player
AV Equipment
e.g. Blu-ray Disc
player
AV Equipment
e.g. DVD Recorder
or
e.g. VCR
red
The Green terminal is shared for both the COMPONENT and COMPOSITE (VIDEO IN) connection.
●
When using COMPOSITE (VIDEO IN) connection, the Yellow connector (Video) should be inserted
into Green connection. (Watching content from external devices (p. 19))
Audio Return Channel (HDMI 2 terminal):
Audio Return Channel (ARC) is a function that enables digital sound signals to be sent via an HDMI
cable back from the TV to a connected audio device.
Audio connection
Audio equipment
DIGITAL
Optical cable
AUDIO IN
e.g. Amplifier
12
Loading...