Matsushita Electric Industrial Co., Ltd.
Central P.O. Box 288, Osaka 530-8692, Japan.
Operating Instructions
Colour Television
Model No.
TC-21FX20 Series
TC-29FX20 Series
TC-29FX50 Series
TX-21FX20 Series
TX-21FX50 Series
TX-29FX20 Series
TX-29FX50 Series
Control Overview
A
Main power on/off switch.
The main switch is used as the disconnecting
device.
1
Standby/on switch.
To switch the TV on from standby mode and
vice versa.
Power Indicator
STANDBY – RED
POWER ON – GREEN
2
Off Timer button. (See Setup menu)
3
Aspect button.
To select Aspect mode: 4:3 or 16:9.
4
Rapid Tune button.
To access previously viewed channel.
5
Programme Number “3” and “4” buttons.
6
Menu button.
7
Recall button.
To display the current system status. Press
again to cancel.
8
Stereo/Bilingual Sound Selection button.
(Not applicable for TC-21FX20 series, TX-
21FX20 series, TC-29FX20 series and TX-
29FX20 series. See Stereo/Bilingual Sound
Selection.)
9
Mute button.
To mute the sound. Press again to cancel.
10
Favorite button. (See Setup menu)
11
Sound Menu button.
12
Normalize button.
To change selected functions in the Picture
and Sound menus to Normal mode (factory
preset condition).
13
OK button.
To confi rm selected option.
14
Volume “–” and “+” buttons.
15
TV/AV button.
To select TV, AV1, AV2, or AV3 input signal
mode.
16
Numeric (0 ~ 9) buttons.
17
Two-digit Programme Number Selection
button.
Hint: To select Programme Number 18, press
18
Teletext operation buttons.
19
VCRs and DVD players operation buttons.
(Not applicable for TC-21FX20 series, TC-29FX20
series and TC-29FX50 series.)
Dear Panasonic customer
Welcome to the Panasonic family of customers. We hope
that you will have many years of enjoyment from your
new colour television.
Please read the operating instructions completely before
operating this set.
Power Source
AC AUTO 110-240V, 50/60Hz (TC-21FX20M, TC-21FX20R, TC-29FX20M,
TC-29FX20R, TC-29FX20U, TX-21FX50M, TX-29FX50M) / AC SINGLE 230-240V,
50Hz (TX-21FX50A, TX-29FX50A) / AC SINGLE 220V, 50Hz (TC-29FX50H) / AC
SINGLE 220-240V, 50/60Hz (TX-21FX20R, TX-29FX20R)
Power Consumption
67 W (21
"
) / 98 W (29" )
Receiving System
17 Systems
SYSTEMS FUNCTION
1
2
3
4
5
6
7
PAL B,G,H
PAL I
PAL D,K
SECAM B,G
SECAM D,K
SECAM K1
NTSC M (NTSC 3.58/4.5 MHz)
Reception of broadcast transmissions
and playback from video cassette tape
recorders.
8
9
10
11
12
13
14
NTSC 4.43 / 5.5 MHz
NTSC 4.43 / 6.0 MHz
NTSC 4.43 / 6.5 MHz
NTSC 3.58 / 5.5 MHz
NTSC 3.58 / 6.0 MHz
NTSC 3.58 / 6.5 MHz
SECAM I
Playback from special VCR only.
15
16
17
PAL 60Hz / 5.5 MHz
PAL 60Hz / 6.0 MHz
PAL 60Hz / 6.5 MHz
Playback from special Disc player and
VCR only.
Receiving Channels
VHF BAND UHF BAND CATV
2-12 PAL/SECAM B,K1
0-12 PAL B (AUST.)
1-9 PAL B (N.Z.)
1-12 PAL/SECAM D
1-12 NTSC M (JAPAN)
2-13 NTSC M (U.S.A.)
21-69 PAL G,H,I/
SECAM G,K,K1
28-69 PAL B (AUST.)
13-57 PAL D,K
13-62 NTSC M (JAPAN)
14-69 NTSC M (U.S.A.)
S1-S20 (OSCAR)
1-125 (U.S.A. CATV)
C13-C49 (JAPAN)
S21-S41 (HYPER)
Z1-Z37 (CHINA)
5A, 9A (AUST.)
Tuning System
Frequency synthesizer, Auto search tuning: 100 position
Picture Tube
Viewable Picture tube measured diagonally: 50.5 cm (21
"
) / 67.6 cm (29" )
Audio Output
8 W + 8 W = 16 W
Aerial Impedance
75 Ω Unbalanced coaxial.
Video/audio terminal:
DVD Y 1.0 Vp-p, 75 Ω
P
B
0.7 Vp-p, 75 Ω
P
R
0.7 Vp-p, 75 Ω
AV 1, 2, 3 Video In 1 Vp-p, 75 Ω
Audio In Approx. 0.5 V, 47 kΩ
Monitor Out Video Out 1 Vp-p, 75 Ω
Audio Out Approx. 0.5 V, 1 kΩ
Remote Control
Transmitter
N2QAJB000161 (TX-21FX20R, TX-21FX50A, TX-21FX50M, TX-29FX20R,
TX-29FX50A, TX-29FX50M)
EUR7717040R (TC-21FX20M, TC-21FX20R, TC-29FX20M, TC-29FX20R,
TC-29FX20U, TC-29FX50H)
Battery
R6 (AA) x 2
Dimension
(WxDxH)
648 mm x 488 mm x 472 mm (21
"
)
786 mm x 508 mm x 578 mm (29" )
Weight (Net)
24 kg (21
"
) / 43 kg (29" )
Note: Design and Specifi cations are subject to change without notice. Weight and Dimensions shown are approximate.
Troubleshooting
Specifi cations
Before you call for service, determine the symptoms and make a few simple checks as shown below.
Symptoms
Checks
Picture Sound
Snowy picture
Noisy sound
Aerial location, direction or connections
Multiple image
Normal sound
Aerial location, direction or connections
Interference
Noisy sound
Electrical appliances
Cars / Motorcycles
Fluorescent lamps
Normal picture
No sound
Volume
(Check whether the mute function has been activated on
the Remote Control.)
No picture
No sound
Not plugged into AC outlet
Not switched on
Contrast and Brightness / Volume Setting
(Check by pressing the Power Switch or Stand-by button
on the Remote Control.)
No colour
Normal sound
Colour control
Scrambled
Normal or weak sound
Retune channels
Coloured patches
Normal sound
Magnetic interference from unshielded equipment;
TV set moved while “ON”.
Turn the TV set off for 30 minutes, using the Power
Switch on the TV set.
No colour
Noisy sound
Sound System
Colour System
Reference tree
Control Overview
Safety Instructions
Getting Started
Tuning menu
To Watch TV Programme
MENU Operation
Teletext Operation
Remote Control Operation
Stereo/Bilingual Sound Selection
Troubleshooting
Specifi cations
TQB4G6097
Part No. N2QAJB000161
(For Teletext model)
Part No. EUR7717040R
(For Non-Teletext model)
MENU TV/AV
VIDEO L/MONO R
AV2 IN
AUDIO
MENU TV/AV
!
TC_TX-21_29FX20_50_EN.indd 2TC_TX-21_29FX20_50_EN.indd 2 2/16/06 10:22:07 AM2/16/06 10:22:07 AM
Audio Video
RLOUT
OUT
Audio Video
RLIN
IN
VHS VCR
Access the Main menu. Select Setup menu. Access Setup menu. Choose Tuning menu. Access Tuning option. Choose menu option. Adjust/access chosen
menu.
Exit the menu
(press twice).
Return to normal TV
screen.
1 2 3 4 5 6 7 8
Connecting the aerial
VHF Aerial
UHF Aerial
Mixer
75 Ω Coaxial
Cable
Connecting
to the
DVD Input
Terminals
DVD player
Connecting
to the AV1
or AV3 Input
Terminals
Red
Yellow
White
Safety Instructions
Getting Started
Connecting
Other Equipment
to the AV Monitor
Output Terminals
Recording equipment (VHS VCR)
Connecting to
the AV2 Input
Terminals
(TV front panel)VHS VCR
Coaxial
Aerial Plug
RF in Terminal
L Connections
Notes
• When a Monaural VCR is used, connect the Monaural Audio cable to the Audio Out “L” (left) terminal.
• The AV3 audio input terminals serves as the audio input terminal for both the video input and for the DVD input.
• The DVD signal input terminal takes priority over the AV3 video signal input terminals.
• Never connect the same video recorder with both the VIDEO IN and MONITOR OUT terminals on this TV set, as this could cause
incorrect operation.
• The DVD signal (Y·P
B·PR
) is not output at the MONITOR OUT terminals.
Red
Yellow
White
Red
White
Tuning menu Description
Sys select
(System
select)
Select the system.
China HK/UK Asia/M.East NZ/INDONES Australia
Japan CATV America SPECL Ver E.Europe
Note
You need to set the “Sys select” mode before carrying out
Auto and Manual tuning.
Auto tuning
Allows you to automatically retune the TV. Useful if you
move house and wish to retune your TV to the local
stations.
1. Press the Volume “–” or “+” button to start Auto tuning.
2. Once this operation is completed, the TV will display the
programmes now stored on programme position 1.
Manual tuning
Allows individual programme positions to be tuned manually.
1. Press the Volume “–” or “+” button to start Manual tuning.
2. Press the Programme Number “3” or “4”, Direct key
0~9 or – – (2 digit key) button to select the programme
position to be tuned.
3. Press the Volume “–” or “+” button repeatedly until the
required station is found.
4. Repeat the above steps to tune other programme
positions.
Tuning menu Description
Sound system
You can change the Sound system used for a programme
channel.
4.5 MHz 5.5 MHz
6.5 MHz 6.0 MHz
Colour system
Lets you select the correct transmission standard.
Auto PAL
SECAM
NTSC 3.58 NTSC 4.43
Fine tuning
Use to make small adjustments to the tuning of an individual
station.
Skip
To skip the undesired Programme Numbers from appearing
on the screen.
This function is only effective when selecting Programme
Numbers by pressing the Programme Number “3” or “4”
button. Skip mode can be switched on or off.
Ch Colour set
Variation in colour density between broadcast channels can
be adjusted to three levels of each reception channel.
Note:
The set is pre-tuned for Australian Ch’s 2, 7, 9, 10, 28, 31 and Auto tuning is NOT
required.
Tuning menu
L Installing the remote control’s batteries
Cautions
• Do not use rechargeable (Ni-Cd) batteries. They are different in shape and performance and may fail to ensure correct
operation.
• Incorrect use of batteries can cause electrolyte leakage which will corrode the remote control or cause the batteries to
burst.
1
Open
2
Insert the R6 (AA) size batteries.
3
Close
Headphone
Red
Yellow
White
Applicable for Teletext
models only.
The TV set can be operated on AC AUTO 110-240V, 50/60Hz (TC-21FX20M,
TC-21FX20R, TC-29FX20M, TC-29FX20R, TC-29FX20U, TX-21FX50M, TX-29FX50M),
or AC SINGLE 230-240V, 50Hz (TX-21FX50A, TX-29FX50A), or AC SINGLE 220V, 50Hz
(TC-29FX50H), or AC SINGLE 220-240V, 50/60Hz (TX-21FX20R, TX-29FX20R).
The cabinet and picture tube can be kept in good condition by simply wiping with a clean,
soft cloth moistened with mild detergent and water. Do not use solutions containing benzol,
petroleum or a chemical cloth. For safety, remove the plug from the wall outlet.
The apparatus shall not be exposed to dripping or splashing and that no objects fi lled with
liquids, such as vases, shall be placed on the apparatus.
Adequate ventilation is essential to prevent failure of electrical components, so we
recommend a gap of at least 10 cm ( ) is left all around the unit when it is placed inside a
cabinet or between shelves.
Do not remove the rear cover, as live parts are accessible when it is removed. Avoid exposing the TV set to direct sunlight and other source of heat.
Remove the plug from the wall outlet (Power point) when the TV set is not used for a
prolonged period of time. The main plug is used as the disconnecting device.
Do not use this set if abnormal operation occurs.
Ex: smoke, odd sounds or smells, turn the power switch off and disconnect the AC power if
you notice any unusual operation.
Do not put the AC cord underneath your TV set or any other object.
MONITOR
AV1
AV3 IN
COMPONENT
OUT
Audio Video
RL
OUT
OUT
IN
Y
MONO
MONO
P
B
P
R
VIDEO L/MONO R
AV2 IN
VIDEO
L
AUDIO
R
AUDIO
2
X
V
5
1
C
D
"
A
A
"
RO
6
RL
/
6
R
6
R
C
L
E
/
I
U
RO
P6
P
/
P6
R
LR
P
R
PBY
К>КККК
*ККVКМКХКАКiÊ
-ÊÊÕÊÊ`
-КiКМКХК«
Ê>ÊÊ}ÊÕÊ>Ê}Êi
iÊÊÕ
Ê
iÕ
iÕ
Ê
iÊÊÕ
!CCESS
-ÊiÊÊiÊVÊÌ
OK
ÊVÊVÊiÊÃÊÃ
ÊÝÊÊÌ
/ÊÕÊÊÊÊ}Ê ÊÊ
iÊÊÕ
КККiК КМКХКККК}
-ККК«К
КККККККХКАК КГКiКМ
ÊÊM
!CCESS
"ÊvÊvÊ
ÊiÊÊÕ
-КiКМКХК«К К
7
Ê>ÊÊi ÊÕÊ«ÊÊÌÊÊКiКА
К>КЫККАККМКiК КК
/КiККiКМКiКЭКМ
/КiКЭКМК КГКiККiКVКМ
ÊiÊÊÕ
/ÊÕÊÊÊÊ}Ê Ê
Ê>Ê}ÊÊiÊÌÊÊV
ÊiÊÊ
ÊÊM
"ÊvÊv
Ê-Ê/ÊÊ8Ê/
ÊÊ}ÊÊÊÃÊ
!CCESS
/ÊÕÊÊÊÊ}Ê ÊÊ
iÊÊÕ
-КЮКГК ГКiККiКVКМ
КХКМКК КМКХКККК}
К>ККХК>КК КМКХКККК}
-ККХКК`К КГКЮКГКМКiК
ККККХКАК КГКЮКГКМКiК
ÊÊM
ÊÃÊÊ>ÊÉÊ°ÊÊ Ê>ÊÃÊÌ
!CCESS
x°ККxКККв
КХКМК
TC_TX-21_29FX20_50_EN.indd 3TC_TX-21_29FX20_50_EN.indd 3 2/16/06 10:22:27 AM2/16/06 10:22:27 AM
Turn the TV set on. Select programme number. Two digit programme number selection. Adjust volume. To turn the TV set off.
Access the Main menu. Select menu. Access menu. Choose menu option. Adjust/access chosen menu. Exit the menu (press twice). Return to normal TV screen.
(Menu for 29" only.)
(Menu for 21
"
only.)
Picture menu Description
Menu
÷
You can change the level of each Function (Colour,
NTSC-Tint, Brightness, Contrast, and Sharpness) for
each Picture menu.
÷
Each Picture menu setting will be memorized for TV,
AV1, AV2 and AV3 modes individually.
Dynamic
For viewing in brighter than normal
environmtents. This menu selects higher than
normal levels of Brightness and Contrast.
Standard
For viewing in normal (evening lighting)
environments. This menu selects the normal
levels of Brightness and Contrast.
Cinema
Ideal for movies. Can be selected for VIDEO/
COMPONENT.
Contrast
Adjust the contrast.
Brightness
Adjust for easier viewing of dark pictures such as night
scenes and hair.
Colour
Adjust slightly to a lighter colour.
Sharpness
Adjust the sharpness of the image.
NTSC-Tint
Adjust for proper skin colour.
Note
When the TV is receiving NTSC signals, NTSC-Tint is
displayed and level adjustment is possible.
Colour
temperature
Lets you set the overall colour tone of the picture.
Cool
Standard
Warm
P-NR
(Picture Noise
Reduction)
Automatically reduces unwanted picture noise.
Off
On
(21" )
Off
Weak
Strong
Auto
(29" )
1
2 3
6543
21
• e.g. To select programme number 18
L Picture menu
L Setup menu
L Sound menu
L Language menu
To Watch TV Programme
MENU Operation
Setup menu Description
Blue back
You can choose Blue back display On or Off when there is
no signal.
Child lock
1. When a channel is “Child Locked”, the sound is muted
and screen becomes blue.
2. If any of the channels is “Child Locked”, the Tuning menu
selection buttons on the front panel will not function, and if
the Volume “–” or “+” button on the front panel is pressed,
the Child lock icon will blink.
3. Turning on the main power in a Child Locked channel will
display the Child lock icon on screen.
4. Each channel has its own memory for channels to be
Child Locked.
VCR/GAME
Reproduction of irregular signals, such as certain TV
games, rental video tapes and abnormal RF signal; may be
improved.
16:9
When the 16:9 mode is On, the screen ratio becomes 16:9.
Off timer
Switches the TV off at a preset time which you can choose
from between 0 to 90 minutes in 15 minutes intervals.
Wake up timer
The Wake Up Timer can be set up to 12 hours.
1. Press the Volume “–” or “+” button to select the timer
option, each press will decrease or increase the timer by
10 minutes.
2. Then, switch the TV to standby mode. The LED light will
blink. If the TV is not switched to standby mode, the Wake
Up Timer will still count down until it elapses.
3. When the Wake Up Timer has elapsed, the TV will switch
on automatically and the Off Timer will automatically be
set to 90-minute. Press any button to cancel the Off Timer
or the TV will switch to standby mode automatically after
90 minutes.
To cancel the Wake Up Timer, choose any of the
following:
÷ Switch off the main power.
÷ Access Wake up timer, then press the Volume “–” or “+” to
select OFF.
÷ Access Wake up timer, then press the Normalize button.
Favorite CH
Favorite CH allows you to store up to 9 programmes in your
preferred channel positions.
1. Press the Volume “–” or “+” button to select “Favorite CH”.
2. Key in the Favorite CH number using the 0 ~ 9 buttons
or Channel “3” or “4” button. Press the Volume “–” or “+”
button to select the channel that you prefer. Repeat to set
all 9 Favorite CH.
3. After completed the setting, press the TV/AV button to
return to the normal viewing condition.
4. To activate the Favorite CH feature, press direct Favorite
key on remote to “on” or press menu key during Favorite
CH setting page is being displayed. Use Volume “–” or
“+” to “on” the feature. Press channel “3” or “4” button to
display the prefered channel that has been stored.
Note
Channel “3” or “4” button can only work to view the
Favorite CH page when this feature is set to On.
Otherwise it will work as normal Channel “3” or “4”
button. If the Favorite CH is set to On but the Favorite
CH is not set, pressing the Channel “3” or “4” button will
display the Favorite CH setting page and you can set the
Favorite CH position that you prefer.
To delete a channel from the Favorite CH list
1. Access Favorite CH, then press the Volume “–” or “+”
button to select the stored Programme Number that you
wish to cancel and press the “Normalize” button.
2. Press the “TV/AV” button to exit to normal TV screen.
Teletext
Allows you to change between List and FASTEXT modes.
Text select
Selects character set, so that all the necessary characters
are available for text on the teletext pages.
Mode languages: English / CIS / E.Europe / Persian / Arabic.
Tuning menu
See front page.
Geomagnetic
(29
"
only)
If you notice a slight tilt to the picture or if there are coloured
patches at the corners of the screen, use this feature to
eliminate them.
Applicable for Teletext models only.
Sound menu Description
Menu
÷ You can change the level of each Function (Equalizer)
for each Sound menu.
÷ Each Sound menu setting will be memorized for TV,
AV1, AV2 and AV3 modes individually.
Music
Recreates the acoustic feel of a live
concert. Adds excitement to music videos,
soundtracks and provides a powerful sound
presence.
News
Enables spoken voice to be heard more
clearly. Ideal for news, documentaries and
talk shows.
Cinema
Recreates the cinematic sound effect from
your TV. This setting provides clear and crisp
dialogue.
Sports
The sound roars around from both sides of
the TV, making you feel as if you are
watching a live game.
Personal
Allows the setting of equalizer and balance to
suit your personal taste.
Volume
Adjust the volume level.
Equalizer
Adjust the bass and treble effects for each Sound menu.
Balance
Adjust the balance of the left and right speakers.
V. hyper bass
Set V. hyper bass on or off.
Loudness
Set Loudness on or off.
AVL
Set AVL on or off.
Surround
Set Surround on or off.
Adjusting the Equalizer
1. While in the Sound menu, press the Programme Number “3” or “4” button until Equalizer is selected.
2. Press the Volume “–” or “+” button to access Equalizer menu and to select each band of Equalizer.
3. Press the Programme Number “3” or “4” button to adjust the level of each frequency band.
Notes
÷ 120Hz and 500Hz : for bass adjustment (low frequency)
÷ 5KHz and 10KHz : for treble adjustment (high frequency)
÷ 2KHz : mid range
Allows you to select your desired on-screen language.
(On the unit)
or
(On the unit)
TC_TX-21_29FX20_50_EN.indd 4TC_TX-21_29FX20_50_EN.indd 4 2/16/06 10:22:36 AM2/16/06 10:22:36 AM
Select VCR or DVD. Press and hold. Enter the manufacturer
code.
Press to complete the
setup.
Yellow
Blue
1. Press followed by the Blue button to request the Time Text Page. T**** will be displayed.
2. Enter the desired sub page number before T**** disappears.
Hint: To select page number 6, enter 0, 0, 0 and 6.
3. Press Display Cancel (Yellow button) to watch the TV programme while waiting for the page to be loaded. The page number is blinking on the screen.
4. When the page is available, press Display Cancel (Yellow button) again to view the sub page.
(For TX-21FX20R, TX-21FX50A, TX-21FX50M, TX-29FX20R, TX-29FX50A, TX-29FX50M.)
The remote control is capable of operating some functions of selected Panasonic VCRs and DVD (Digital
Versatile Disc) players. Some VCRs and DVD players have different functions. So to ensure compatibility, please
refer to the equipment’s instruction book or consult your dealer for details.
Remote Control Operation for VCRs and DVD Players
L Sub Coded Page Access
When teletext information exceeded one page, it may take some time to reach the sub page you required. It is possible to enter your required sub page and continue watching the TV programme until the correct sub page is found.
If the top of the page indicates that the sub pages are being transmitted and yet the page does not change, then the number at the top of the page is there to indicate that the broadcaster has updated the page’s contents and there
are no sub pages.
Audio Signal Mode Indicator
STEREO
m
MAIN I
I
SUB II
II
MONO
4
Type of broadcast Mode Indicator
NICAM
Regular broadcast
(Standard Audio)
No Indicator ↔ 4
Regular +
NICAM MONO I
(MAIN I)
I ↔ 4
NICAM STEREO
m ↔ 4
NICAM DUAL MONO
(MAIN I / SUB II)
I ↔ II
4
A2 (German)
Regular broadcast
(Standard Audio)
No Indicator ↔ 4
BILINGUAL or DUAL MONO :
MAIN I / SUB II
I ↔ II
STEREO
m ↔ 4
Notes
1. The “A2 (German)” stereo/bilingual TV sound transmission system is used in the following countries; Australia,
Malaysia, Thailand, Indonesia, etc. The “NICAM” stereo TV sound transmission system is used in the following
countries; New Zealand, Singapore, Hong Kong, Thailand, China and Malaysia.
2. If the stereo signal is poor or the receiving conditions are not optimum or if STEREO:MONO automatic
switching occurs, it is recommended you switch from STEREO to MONO. When the broadcasting mode
changes to “STEREO”, or “MONO” after you have selected “MONO” mode, change over “STEREO” mode will
be made automatically.
3. Even when the contents of the receiving signal undergo changes, selection mode is kept intact.
4. When the receiving conditions deteriorate, listening will be easier if the mode is set to the “MONO” position,
using the stereo/bilingual sound selection button.
5. “DUAL”, also known as “DUAL MONO” or as “BILINGUAL” is not currently transmitted in some countries.
Notes
÷ The respective VCR/DVD code is cancelled when the remote control’s batteries are changed. You will need
to set it again.
÷ Depending on the model, operation of VCRs or DVD players of the manufacturers listed above may not be
possible. In some cases, new products may not be operative.
÷ The remote control will not operate with VCRs and DVD players of manufacturers other than the above listed.
VCR
Manufacturer Code
National/Panasonic 10, 11, 12, 13
DVD Player
Manufacturer Code
Panasonic 70, 71
21
(For TC-29FX50H, TX-21FX50A, TX-21FX50M, TX-29FX50A, TX-29FX50M.)
Allows you to select STEREO, BILINGUAL (if transmitted) or MONO sound output mode.
Stereo/Bilingual Sound Selection
L Button description for VCR and DVD player operation
Power button
VCR REC (Record) button
Programme Number Left
and Right buttons (VCR)
Programme Skip button
(DVD)
Stop button
VCR / DVD Selection button
Rew (Rewind) / Review button
Pause / Still button
Play button
FF (Fast forward) / Cue button
TV/Teletext mode selection
Press repeatedly to change the TV/Teletext mode as follows:
Page Selection
Press to select your desired page.
Hold
Press to hold the current page. Press again to cancel the hold.
Index
Press to return to the main index page.
2ED 'REEN 9ELLOW "LUE
List mode
Press the coloured button that corresponds to the desired page number.
Each of these numbers can be altered and stored in the TV’s memory.
FASTEXT mode
Press the coloured button that corresponds to the desired subject. To access
more information about the subjects, press the corresponding coloured
button.
(For TX-21FX20R, TX-21FX50A, TX-21FX50M, TX-29FX20R, TX-29FX50A, TX-29FX50M.)
÷ Teletext features may vary depending on the Broadcasting Companies and is only available if the channel
selected is transmitting Teletext.
÷ While in the Teletext mode, pressing the Menu button will produce the following effects:
First Press: REVEAL (Red button) and F/T/B (Green button), Display Cancel (Yellow button), and TIME
TEXT (Blue button).
Teletext Operation
Second press: Contrast.
Third press: Normal Text.
÷ The Volume, Contrast and Fine Tuning adjustment can be done by using panel menu and Volume “–” or “+”
buttons while in text mode.
÷ If the on-screen characters are illegible, select another Text Language.
'REEN
Full/Top/Bottom
Press
to display special functions, followed by the Green button.
Press the Green button again to expand the Top/Bottom half. Press again to
return to normal (FULL) size.
2ED
Reveal
Press
to display special functions, followed by the Red button to reveal
hidden words, e.g. quiz answer page. Press again to hide.
9ELLOW
Display Cancel
Press to display special functions, followed by the Yellow button to
watch the normal TV programme. When the desired Sub-page is received,
the page number will stop blinking.
Press
to exit to the normal TV mode.
Notes
÷ This feature is to cancel the Teletext display and to exit the Display Cancel
function.
÷ While in the Teletext mode, Position Up or Down button can change the
Teletext page number.
Favourite Page (F.P.)
Stores a Favourite Page in memory for instant recall. To store such a page,
the TV must be in the List mode.
Press the Blue button. Key-in the page number, then press and hold .
To recall the stored page, press .
or
"LUE
TC_TX-21_29FX20_50_EN.indd 5TC_TX-21_29FX20_50_EN.indd 5 2/16/06 10:22:41 AM2/16/06 10:22:41 AM
Loading...