Panasonic SC-HTE180 Operating Instructions

Operating Instructions

printing

Home Theater Audio System

Model No. SC-HTE180

Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Please keep this manual for future reference.

“EB” indicates the United Kingdom model.

EB GN

RQT9937-B

Do the procedures with the remote control. You can also use the buttons on the main unit if they are the same.

printing

Your system and the illustrations can look differently.

Safety precautions

WARNING!

Unit

• To reduce the risk of fire, electric shock or product damage, – Do not expose this unit to rain, moisture, dripping or

splashing.

– Do not place objects filled with liquids, such as

vases, on this unit. – Use only the recommended accessories. – Do not remove covers. – Do not repair this unit by yourself. Refer servicing to

qualified service personnel.

AC mains lead

• To reduce the risk of fire, electric shock or product damage, – Make sure that the power supply voltage

corresponds to the voltage printed on this unit. – Insert the mains plug fully into the socket outlet. – Do not pull, bend, or place heavy items on the lead. – Do not handle the plug with wet hands. – Hold onto the mains plug body when disconnecting

the plug. – Do not use a damaged mains plug or socket outlet.

• The mains plug is the disconnecting device. Install this unit so that the mains plug can be unplugged from the socket outlet immediately.

Battery

• Risk of fire, explosion and burns. Do not recharge, disassemble, heat above 60°C or incinerate.

• Keep the Button-Type battery out of the reach of children. Never put Button-Type battery in mouth. If swallowed call your doctor.

Supplied accessories

Check and identify the supplied accessories.

For the United Kingdom and Ireland

Use numbers indicated in parentheses when asking for replacement parts. (Product numbers correct as of February 2014. These may be subject to change.)

 1 AC mains lead

For the United Kingdom and Ireland

(K2CT2YY00097)

For Australia and New Zealand

 1 Remote control (with a battery)

(N2QAYC000098)

RQT9937

CAUTION!

Unit

• To reduce the risk of fire, electric shock or product damage, – Do not install or place this unit in a bookcase, built-in

cabinet or in another confined space. Ensure this unit is well ventilated.

– Do not obstruct this unit’s ventilation openings with

newspapers, tablecloths, curtains, and similar items.

– Do not place sources of naked flames, such as

lighted candles, on this unit.

• This unit is intended for use in moderate climates.

• This unit may receive radio interference caused by mobile telephones during use. If such interference occurs, please increase separation between this unit and the mobile telephone.

• Do not touch the bottom of the unit. It might be hot when you use it for a long period.

Battery

• Danger of explosion if battery is incorrectly replaced. Replace only with the type recommended by the manufacturer.

• When disposing the batteries, please contact your local authorities or dealer and ask for the correct method of disposal.

• Do not heat or expose to flame.

• Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with doors and windows closed.

• Remove the battery if you do not use the remote control for a long period of time. Keep in a cool, dark area.

Table of contents

Safety precautions. . . . . . . . . . . . . . . . . . . . . . . . . . 2

Supplied accessories . . . . . . . . . . . . . . . . . . . . . . . 2

Caution for AC mains lead . . . . . . . . . . . . . . . . . . . 3

About Bluetooth®. . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Preparing the remote control . . . . . . . . . . . . . . . . . 4

Overview of controls . . . . . . . . . . . . . . . . . . . . . . . . 5

Making the connections . . . . . . . . . . . . . . . . . . . . . 6

Basic control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

3D sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Sound menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Linked operations with the TV (VIERA Link™

“HDAVI Control™”) . . . . . . . . . . . . . . . . . . . . . . . . 11

Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Licenses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Limited Warranty (Only For Australia). . . . . . . . . . 15

Caution for AC mains lead

Fuse cover

Fuse (5 ampere)

printing

(For the AC mains plug of three pins)

For your safety, please read the following text carefully.

This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5-ampere fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5-ampere and that it is approved by ASTA or BSI to BS1362.

Check for the ASTA mark or the BSI mark on the body of the fuse.

If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local dealer.

Before use

Remove the connector cover.

How to replace the fuse

The location of the fuse differ according to the type of AC mains plug (figures A and B). Confirm the AC mains plug fitted and follow the instructions below. Illustrations may differ from actual AC mains plug.

1. Open the fuse cover with a screwdriver.

Figure A Figure B

2. Replace the fuse and close or attach the fuse cover.

Figure A Figure B

About Bluetooth

Panasonic bears no responsibility for data and/or information that can possibly be compromised during a wireless transmission.

Frequency band

• This system uses the 2.4 GHz frequency band.

Certification

• This system conforms to the frequency restrictions and has received certification based on frequency laws. Thus, a wireless permit is not necessary.

• The actions below are punishable by law: – Taking apart or modifying the main unit. – Removing specification indications.

Restrictions of use

• Wireless transmission and/or usage with all Bluetooth equipped devices is not guaranteed.

• All devices must conform to standards set by Bluetooth SIG, Inc.

• Depending on the specifications and settings of a device, it can fail to connect or some operations can be different.

• This system supports Bluetooth depending on the operating environment and/or settings, this security is possibly not sufficient. Transmit data wirelessly to this system with caution.

• This system cannot transmit data to a Bluetooth device.

Range of use

• Use this device at a maximum range of 10 m.

• The range can decrease depending on the environment, obstacles or interference.

Interference from other devices

• This system may not function properly and troubles such as noise and sound jumps may arise due to radio wave interference if this unit is located too close to other Bluetooth

2.4 GHz band.

• This system may not function properly if radio waves from a nearby broadcasting station, etc. is too strong.

Intended usage

• This system is for normal, general use only.

• Do not use this system near an equipment or in an environment that is sensitive to radio frequency interference (example: airports, hospitals, laboratories, etc.).

devices or the devices that use the

security features. But

RQT9937

Placement

700 mm

365 mm

Insulation sheet

printing

When the TV is less than 50 kg, and the pedestal of the TV is within 700 mm (width) by 365 mm (depth), you can put the TV on top of the system.

CAUTION!

• Keep the TV within the surface of the system. Be careful not to tip over the TV as it can cause injury.

Note:

• Do not put the system in a metal cabinet.

• Keep other 2.4 GHz frequency band electronic devices such as wireless router, cordless phone, etc. at least 2 m away from this system to avoid wireless interference.

• If irregular colouring occurs on the TV, switch off the TV for 30 minutes. If the demagnetising of the TV does not correct the problem, increase the distance between this system and the TV.

• Keep magnetised items away. Magnetised cards, watches, etc., can be damaged if put too near to the system.

Preparing the remote control

█ Before using

Remove the insulation sheet.

█ Replacing the battery

Replace with a new battery (CR2025 lithium battery).

• Install the anti-tip device for your TV. For installation details, refer to the operating instruction for the TV. If your TV does not come with an anti-tip device, consult your dealer.

• Moving the TV on the surface of the system can scratch the surface of the system. Lift the TV when you need to move it.

Otherwise, put the system at the right side (recommended) of the TV or in a rack.

RQT9937

1 While pressing the stopper, pull out the battery

holder.

2 Insert a new battery with the (+) side facing up. 3 Push the battery holder back fully.

CAUTION!

Keep the button-type battery out of reach of children to prevent swallowing.

Overview of controls

MUTE

SETUP

INPUT

SOUND

PAIRING

TV BD/DVD

BLUETOOTH

AUX

BFAK

Side view

Front panel

LMNO P Q

Rear panel

printing

A Standby/on switch [`], [1]

Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power.

B Select input source

C View setup menu

D View sound menu

E Select Bluetooth

Start Bluetooth

mode

pairing mode

F Adjust the volume of the system

G Mute the sound of the system

To cancel, press the button again. “MUTE” is also cancelled when you adjust the volume or when you switch off the system.

H Select and confirm the option

I Remote control sensor

Distance: Within approximately 7 m Angle: Approximately 20° up and down, 30° left and

right

J Display panel

K NFC touch area

L AC IN terminal

M HDMI IN terminal (BD/DVD)

N HDMI OUT terminal (ARC compatible)

O DIGITAL AUDIO IN (TV) terminal

P USB port (for service use only)

Q AUX IN terminal

RQT9937

+ 11 hidden pages