CD Stereo System
Operating Instructions
Model No. SC-EN5
CLOCK
TIMER
ON/OFF
TIMER ADJ
DISPLAY SLEEP PGM/–CLEAR
EQ
LIVE VIRTUALIZER
PLAY MODE
CD
AUX
TUNER/BAND
TUNING MODE
VOLUME
E EB GN
Note:
“EB” on the packaging indicates the United
Kingdom.
Before connecting, operating or adjusting this product, please read these instructions completely.
Please keep this manual for future reference.
RQT6736-1B
Table of contents
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions
carefully.
These instructions are applicable to the SC-EN5 stereo system and
the supplied RAPX0042 speakers.
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
(Back of product)
INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED.
DANGER
AVOID DIRECT EXPOSURE TO BEAM.
USYNLIG LASERSTRÅLING VED ÅBNING, NÅR SIKKERHEDSAFBRYDERE
ADVARSEL
ER UDE AF FUNKTION. UNDGÅ UDSÆTTELSE FOR STRÅLING.
AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET ALTTIINA
VARO!
NÄKYMÄTÖNTÄ LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN.
OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD OCH
VARNING
SPÄRREN ÄR URKOPPLAD. BETRAKTA EJ STRÅLEN.
USYNLIG LASERSTRÅLING NÅR DEKSEL ÅPNES OG SIKKERHEDSLÅS
ADVARSEL
BRYTES. UNNGÅ EKSPONERING FOR STRÅLEN.
UNSICHTBARE LASERSTRAHLUNG, WENN ABDECKUNG GEÖFFNET
VORSICHT
UND SICHERHEITSVERRIEGELUNG ÜBERBRÜCKT.
NICHT DEM STRAHL AUSSETZEN.
Inside of product
Tuotteen sisällä
Produktets innside
Supplied accessories .............................................. 2
Safety precautions ................................................... 3
Placement of speakers ............................................ 3
Caution for AC Mains Lead ..................................... 3
The remote control .................................................. 4
Set-up ....................................................................... 4
Front panel controls ................................................ 5
CDs ........................................................................... 6
The radio: manual tuning ........................................ 8
The radio: preset tuning.......................................... 8
Sound quality ........................................................... 9
External unit connections ....................................... 9
Using an external unit ............................................. 9
Using headphones (not included) .......................... 9
Setting the time........................................................ 9
Using the timers .................................................... 10
Troubleshooting guide .......................................... 11
Specifications ........................................................ 11
Maintenance ............................................ Back cover
Supplied accessories
Please check and identify the
supplied accessories.
Remote control
transmitter ..................... 1 pc.
(EUR7101010)
AM loop antenna .. 1 pc.
(G0ZZ00002036)
2
RQT6736
For the United Kingdom and Republic of Ireland
shop@
www.panasonic.co.uk (for UK customers only)
Order accessory and consumable items for your product with
•
ease and confidence by telephoning our Customer Care Centre
Mon–Friday 9:00 am–5:30 pm.
(Excluding public holidays.)
Or go on line through our Internet Accessory ordering
•
application.
Most major credit and debit cards accepted.
•
All enquiries transactions and distribution facilities are provided
•
directly by Panasonic UK Ltd.
It couldn’t be simpler!
•
Customer Care Centre
For UK customers: 08705 357357
For Republic of Ireland customers: 01 289 8333
Technical Support
For UK customers: 0870 1 505610
This Technical Support Hot Line number is for Panasonic
PC software related products only.
For Republic of Ireland, please use the Customer Care Centre
number listed above for all enquiries.
For all other product related enquiries, please use the
Customer Care Centre numbers listed above.
AC adaptor ..................... 1 pc.
For Europe
(RFEA202E-T)
For Australia and New Zealand
(RFEA204A-T)
Battery ............................ 1 pc.
(CR2032)
For the United Kingdom
(RFEA203B-T)
Safety precautions
Caution for AC Mains Lead
Placement
Set the unit up on an even surface away from direct sunlight, high
temperatures, high humidity, and excessive vibration. These
conditions can damage the cabinet and other components, thereby
shortening the unit’s service life.
Place it at least 15 cm away from wall surfaces to avoid distortion
and unwanted acoustical effects.
Do not place heavy items on the unit.
Foreign matter
Do not let metal objects fall inside the unit. This can cause electric
shock or malfunction.
Do not let liquids get into the unit. This can cause electric shock or
malfunction. If this occurs, immediately disconnect the unit from the
power supply and contact your dealer.
Do not spray insecticides onto or into the unit. They contain
flammable gases which can ignite if sprayed into the unit.
Service
Do not attempt to repair this unit by yourself. If sound is interrupted,
indicators fail to light, smoke appears, or any other problem that is not
covered in these instructions occurs, disconnect the AC mains lead
and contact your dealer or an authorized service center. Electric shock
or damage to the unit can occur if the unit is repaired, disassembled
or reconstructed by unqualified persons.
Extend operating life by disconnecting the unit from the power source
if it is not to be used for a long time.
(For United Kingdom)
(“EB” area code model only)
For your safety, please read the following text carefully.
This appliance is supplied with a moulded three pin mains plug for
your safety and convenience.
A 3-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the replacement
fuse has a rating of 3-ampere and that it is approved by ASTA or BSI
to BS1362.
Check for the ASTA mark or the BSI mark on the body of the
fuse.
If the plug contains a removable fuse cover you must ensure that it is
refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a replacement
cover is obtained.
A replacement fuse cover can be purchased from your local dealer.
CAUTION!
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR
THE SOCKET OUTLET IN YOUR HOME THEN THE FUSE
SHOULD BE REMOVED AND THE PLUG CUT OFF AND
DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK
IF THE CUT OFF PLUG IS INSERTED INTO ANY 13AMPERE SOCKET.
If a new plug is to be fitted please observe the wiring code as stated
below.
If in any doubt please consult a qualified electrician.
Placement of speakers
Speakers are designed identically so that no left or right channel
orientation is necessary.
Notes
• Keep your speakers at least 10 mm away from the system for
proper ventilation.
• These speakers do not have magnetic shielding. Do not place them
near televisions, personal computers or other devices easily
influenced by magnetism.
• To avoid damage to the speakers, do not touch the speaker cones
if you have taken the nets off.
Caution
Use the speakers only with the recommended system.
•
Failure to do so may lead to damage to the amplifier and/
or the speakers, and may result in the risk of fire. Consult
a qualified service person if damage has occurred or if
you experience a sudden change in performance.
Do not attach these speakers to walls or ceilings.
•
IMPORTANT
The wires in this mains lead are coloured in accordance with the
following code:
Blue: Neutral, Brown: Live.
As these colours may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured Blue must be connected to the terminal
which is marked with the letter N or coloured Black or Blue.
The wire which is coloured Brown must be connected to the terminal
which is marked with the letter L or coloured Brown or Red.
WARNING: DO NOT CONNECT EITHER WIRE TO THE
EARTH TERMINAL WHICH IS MARKED WITH THE LETTER
E, BY THE EARTH SYMBOL i
OR COLOURED GREEN
OR GREEN/YELLOW.
THIS PLUG IS NOT WATERPROOF–KEEP DRY.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the type of AC mains plug
(figures A and B). Confirm the AC mains plug fitted and follow the
instructions below.
Illustrations may differ from actual AC mains plug.
1. Open the fuse cover with a screwdriver.
Figure BFigure A
2. Replace the fuse and close or attach the fuse cover.
Figure A Figure B
Fuse
(3 ampere)
Fuse cover
Fuse
(3 ampere)
3
RQT6736
The remote control
Battery
A
H
PUS
2
1
PUSH
1
3
The battery holder of this remote control comes with a safety lock.
•
To open, use a pin (not included) or similar object to push into hole
A and pull out the battery holder.
Insert the battery with the positive (+) side facing down.
•
Do not use rechargeable type batteries.
•
CAUTION!
DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY
REPLACED.
REPLACE ONLY WITH THE SAME OR EQUIVALENT
TYPE RECOMMENDED BY THE MANUFACTURER.
DISCARD USED BATTERIES ACCORDING TO THE
MANUFACTURER’S INSTRUCTIONS.
Use
Remote control
signal sensor
30
Transmission
window
Aim at the sensor, avoiding obstacles, at a maximum range of 7
meters directly in front of the unit.
Keep the transmission window and the unit’s sensor free from dust.
•
Operation can be affected by strong light sources, such as direct
•
sunlight, and the glass doors on cabinets.
˚
Do not:
put heavy objects on the remote control.
•
take the remote control apart.
•
spill liquids onto the remote control.
•
30
˚
About 7 meters in front of
the signal sensor
4
RQT6736
Set-up
Connect the AC adaptor only after all other connections have been made.
Preparation
Twist and pull off the vinyl tip of the speaker cords.
3 AC adaptor
To household
mains socket
AC adaptor
(included)
Note
The configuration of the AC adaptor differs
according to the area.
1 AM loop antenna
Stand the antenna up on its base.gfsjkgn
2 Speaker cords
Red
Black
Black
Red
1
(4Ω)
Copper (+)
Use only the supplied speakers.
The combination of the main unit and speakers
provide the best sound. Using other speakers can
damage the unit and sound quality will be
negatively affected.
2
Silver (–)
AM ANT
Copper (+)
Silver (–)
Front panel controls
Main unit
1 Display
2 AUX button (AUX) ....................................................... 9
3 Tuner/band select button (TUNER/BAND) ................ 8
4 CD stop, CD lid open/close button (L/c) ................. 6
5 CD play/pause button (CD :/ J) ................................ 6
6 CD lid
7 Tuning mode select button (TUNING MODE) ........... 8
8 Standby/on switch (
Press to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a small
amount of power.
The unit is in the standby condition (the [f/I] indicator
lights) when the AC mains lead is connected. The primary
circuit is always “live” as long as the AC adaptor is
connected to an electrical outlet.
When the unit is connected to the AC adaptor, this indicator
lights up in standby mode and goes out when the unit is
turned on.
9 CD skip/search, tune/preset channel select, time adjust
buttons (g/∂, µ/f) .................................... 6, 8, 9
0 Volume control (VOLUME, ∂, µ) ............................... 6
! Remote control signal sensor ................................... 4
ff
f/I)
ff
Before using
Remote control
Buttons such as 8 function in exactly the same way as the
buttons on the main unit.
@ Clock/timer adjust button
(CLOCK/TIMER ADJ) ............................................ 9, 10
# Display button (DISPLAY) .......................................... 9
$ EQ select button (EQ) ................................................. 9
% Live virtualizer button (LIVE VIRTUALIZER) ............. 9
^ CD stop button (L) ..................................................... 6
& Timer on/off button (TIMER ON/OFF) ...................... 10
* CD program/clear, tuner preset button
(PGM/–CLEAR) ........................................................ 7, 8
( Sleep timer button (SLEEP) ..................................... 10
) Play mode select button (PLAY MODE) ................ 7, 8
5
RQT6736
CDs
AUX
TUNER/BAND
TUNING MODE
LIVE VIRTUAL IZER
PLAY MODE
VOLUME
DISP
SLEEP
PGM/
CLEAR
CD
CK
TIMER ADJ
TIMER
ON/OFF
CD selection
Choose CDs with this mark:
Do not:
use irregularly shaped CDs.
•
attach extra labels and stickers.
•
use CDs with labels and stickers
•
that are coming off or with
adhesive exuding from under
labels and stickers.
attach scratch proof covers or
•
any other kind of accessory.
write anything on the CD.
•
clean CDs with liquids. (Wipe
•
with a soft, dry cloth.)
use CDs printed with label
•
printers available on the market.
This unit can play CD-DA (digital audio) format audio CD-R and
CD-RW that have been finalized (a process that enables CD-R/
CD-RW players to play audio CD-R and CD-RW) upon completion
of recording.
It may not be able to play some CD-R or CD-RW due to the
condition of the recording.
XXXX XXXX XXXXX XXXX XX
XXXX XXXX XXXXX
XXXX XXXX XXXXX
XXXX XXXX
One touch play
When a CD is loaded and the unit is off, press [CD :/J].
The unit comes on and starts play.
Notes
During random play (A page 7), you cannot skip to tracks which
•
have already been played.
During program play or random play (A page 7), you cannot search
•
forward or backward over tracks.
During program play, skipping is always in the programmed order,
•
whether forward or backward.
Program play cannot be used in combination with random play.
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
•
Direct access play
2
1
Direct access allows you to start normal play from a specific track to
the last track of the CD.
3
1 • 2
g/∂, µ/f
Cassette deck operations
1 Press [L/c] to open the CD lid.
The unit comes on.
Ensure that the whip antenna does not block the CD lid when it is
opening.
2 Load a CD with the label facing outward.
Press [L/c] to close the CD lid.
Caution:
Keep fingers away from the CD lid when it is closing to
avoid possible minor injury.
3 Press [CD :/J] to start play.
Plays to the end of the CD and stops.
4 Adjust the volume.
4
Preparation:
CLCLOCK
TIMER
ON/OFF
TIMER ADJ
DISP
LAYAYSLEEP
PGM/
–CLEAR
EQEQLIVE VIRTUALIZER
PLAY MODE
CD
AUX
TUNER/BAND
TUNING MODE
L
VOLUME
Press [CD :/J] and then [L/c].
1 Press [g/∂] or [µ/f] to select the desired track
number.
2 Press [CD :/J] to start play.
Play will start with the track you select.
6
RQT6736
To stop the disc
Press [L/c]. (remote control: [L])
To pause play
Press [CD :/J]. Press [CD :/J] again to resume play.
Skipping tracks
Press [g/∂] (backward) or [µ/f] (forward).
Searching through tracks
During play or pause
Press and hold [g/∂] (backward) or [µ/f] (forward).
Repeat play and random play Program play
AUX
TUNER/BAND
TUNING M ODE
LIVE VIRT UALIZER
PLAY MODE
VOLUME
DISP
SLEEP
PGM/
CLEAR
CD
CK
TIMER ADJ
TIMER
ON/OFF
AUX
TUNER/BAND
TUNING M ODE
LIVE VIRT UALIZER
PLAY MODE
VOLUME
DISP
SLEEP
PGM/
CLEAR
CD
CK
TIMER ADJ
TIMER
ON/OFF
CLCLOCK
TIMER
ON/OFF
TIMER ADJ
DISP
LAYAYSLEEP
PGM/
EQEQLIVE VIRTUALIZER
AUX
TUNER/BAND
TUNING MODE
–CLEAR
PLAY MODE
CD
VOLUME
PGM/–CLEAR
1
2
TIMER ADJ
DISP
LAYAYSLEEP
EQEQLIVE VIRTUALIZER
AUX
TUNER/BAND
TUNING MODE
CLCLOCK
PGM/
VOLUME
TIMER
ON/OFF
–CLEAR
PLAY MODE
CD
1 3
5
2
Remote control only
1 Press [PLAY MODE] before play to select the desired
play mode.
Every time you press the button:
1-
To repeat just one track:
Press [PLAY MODE] to select “ 1- ”.
To repeat all tracks:
Press [PLAY MODE] to select “ ”.
To start random play:
Press [PLAY MODE] to select “ RND ”.
All tracks on the loaded CD will be played in random order.
Playback will stop automatically when all tracks have been played.
RND
(off)
2 Press [CD :/J] to start play.
To cancel repeat play and random play
Press [PLAY MODE] to select “(off)” during stop.
Repeat play and random play will also be cancelled by opening the
CD lid.
To repeat programmed tracks
1 Program desired tracks (steps 1 to 5 on page 7).
2 Press [PLAY MODE] to display “ ”.
3 Press [CD :/J] to begin play.
Notes
You can also turn the repeat mode on/off during CD play.
•
Random play does not work when “
•
hold [PGM/–CLEAR] first).
Search can be done within the track in play only.
•
” is displayed (press and
PGM
This function allows you to program up to 24 tracks.
Remote control only
Preparation: Press [CD :/J] and then [L].
1 (In the stop mode)
Press [PGM/–CLEAR].
∂∂
2 Press [g/
µµ
∂] or [
µ/f] to select the track you want
∂∂
µµ
to play in the desired sequence.
3 Press [PGM/–CLEAR] again.
4 Repeat steps 2 and 3 until you have programmed all
the tracks you want.
5 Press [CD :/J].
Play will start in the programmed sequence.
Play will stop automatically when all the programmed tracks have
been played.
The program remains intact even if play is stopped or the unit is
turned off. “P” appears when play is stopped to indicate the
contents are in the memory.
To cancel program play mode
Press and hold [PGM/–CLEAR] in the stop mode until “CLEAR” is
displayed.
The mode is also cancelled if the CD lid is opened.
This will also erase the entire program.
When “– –:– –” is displayed
Total play time of the programmed tracks equals, or exceeds 250
minutes.
Tracks can still be programmed and played.
When “PGM FULL” appears
The number of programmed tracks is limited to 24. No further tracks
can be programmed.
Check program contents
1 Press [L].
“P” is displayed.
2 Press [PGM/–CLEAR], then press either [g/∂] or [µ/f].
Every time you press one of the buttons, the track and program
No. are shown on the display.
Add to the program
In the stop mode, repeat steps 2 and 3.
Notes
Program play does not work when “RND” is displayed
•
(press [PLAY MODE] to clear it) (A page 7).
Search can be done within tracks only.
•
Cassette deck operations
Recording operations
7
RQT6736
The radio: manual tuning
AUX
TUNER/BAND
TUNING M ODE
LIVE VIRT UALIZER
PLAY MODE
VOLUME
DISP
SLEEP
PGM/
CLEAR
CD
CK
TIMER ADJ
TIMER
ON/OFF
AUX
TUNER/BAND
TUNING M ODE
LIVE VIRT UALIZER
PLAY MODE
VOLUME
DISP
SLEEP
PGM/
CLEAR
CD
CK
TIMER ADJ
TIMER
ON/OFF
PLAY MODE
1
3
4
TIMER ADJ
DISP
LAYAYSLEEP
EQEQLIVE VIRTUALIZER
AUX
TUNER/BAND
TUNING MODE
CLCLOCK
PGM/
VOLUME
TIMER
ON/OFF
–CLEAR
PLAY MODE
CD
The radio: preset tuning
Up to 12 stations each can be set in the FM and AM bands.
Preparation:
Press [TUNER/BAND] to select “FM” or “AM”.
CLCLOCK
TIMER
ON/OFF
TIMER ADJ
DISP
LAYAYSLEEP
PGM/
2
EQEQLIVE VIRTUALIZER
AUX
TUNER/BAND
TUNING MODE
–CLEAR
PLAY MODE
CD
VOLUME
PGM/–CLEAR
g/∂, µ/f
2
1 Press [TUNER/BAND] to select “FM” or “AM”.
The unit comes on.
Every time you press the button:
FM ↔ AM
2 Press [TUNING MODE] to select “MANUAL”.
Every time you press the button:
MANUAL ↔ PRESET
∂∂
3 Press [g/
the required station.
4 Adjust the volume.
Auto tuning
Press and hold [g/∂] or [µ/f] for a moment until the frequency
starts changing rapidly. The unit begins auto tuning, stopping when it
finds a station.
Auto tuning may not function when there is excessive interference.
•
To cancel auto tuning, press [g/∂] or [µ/f] once again.
•
To improve reception
Extend the whip antenna and adjust its direction.
Cassette deck operations
If noise is excessive in FM
Remote control only
Press [PLAY MODE] to display “MONO”.
This mode improves sound quality if reception is weak, but broadcasts
will be heard in monaural.
Press [PLAY MODE] again to cancel the mode.
“MONO” goes out. MONO is also cancelled if the frequency is changed.
Turn off “MONO” for normal listening. Stereo and monaural broadcasts are automatically played as they are received.
µµ
∂] or [
µ/f] to select the frequency of
∂∂
µµ
3
1
Manual pre-setting
Remote control only
Pre-set the stations one at a time.
∂∂
1 Press [PGM/–CLEAR] then press [g/
to tune to the required station.
2 Press [PGM/–CLEAR] then press [g/
to select a channel.
3 Press [PGM/–CLEAR].
The station occupying a channel is erased if another station is preset
in that channel.
Selecting channels
1 Press [TUNING MODE] to select “PRESET”.
∂∂
2 Press [g/
3 Adjust the volume.
µµ
∂] or [
µ/f] to select the channel.
∂∂
µµ
∂] or [
∂∂
∂∂
∂] or [
∂∂
µµ
µ/f]
µµ
µµ
µ/f]
µµ
8
RQT6736
Sound quality
AUX
TUNER/BAND
TUNING M ODE
LIVE VIRT UALIZER
PLAY MODE
DISP
SLEEP
PGM/
CLEAR
CD
CK
TIMER ADJ
TIMER
ON/OFF
AUX
TUNER/BAND
TUNING M ODE
LIVE VIRT UALIZER
PLAY MODE
VOLUME
DISP
SLEEP
PGM/
CLEAR
CD
CK
TIMER ADJ
TIMER
ON/OFF
Using an external unit
CLCLOCK
TIMER
ON/OFF
TIMER ADJ
DISP
LAYAYSLEEP
PGM/
–CLEAR
EQEQLIVE VIRTUALIZER
EQ
AUX
TUNER/BAND
TUNING MODE
PLAY MODE
CD
LIVE
VIRTUALIZER
Using the built-in sound quality
Remote control only
You can choose one of four types of sound quality.
D.BASS: Adds punch to rock
CLEAR: Clarifies higher sounds
SOFT: For background music
VOCAL: Adds gloss to vocal
Press [EQ] to select a setting.
Every time you press the button:
3-D sound with the Live Virtualizer
Remote control only
You can create a three-dimensional sound field when listening to stereo
sound.
Press [LIVE VIRTUALIZER].
Press again to cancel.
Note
The actual effect depends on the source played.
External unit connections
Analogue player
(not included)
You can boost up the “AUX” output level.
Press and hold [AUX].
Every time you press and hold the button:
NORMAL ↔ HIGH
NORMAL: Normal output signal level
(Use when external source’s signal level is normal).
HIGH: To boost up to a higher output signal level
(Use when external source’s signal level is low, for example
portable CD/MD player).
Using headphones (not included)
PHONES
Reduce the volume level and connect the headphones to the
[PHONES] jack.
Plug type: 3.5 mm stereo
Note
Avoid listening for prolonged periods of time to prevent hearing damage.
Setting the time
CLCLOCK
TIMER
ON/OFF
TIMER ADJ
1
DISP
LAYAYSLEEP
EQEQLIVE VIRTUALIZER
AUX
TUNER/BAND
TUNING MODE
PGM/
VOLUME
–CLEAR
PLAY MODE
CD
2 4
3
AUX
An analog player with a built-in phono equalizer can be connected.
•
For details, refer to the instruction manual of the units which are to
•
be connected.
When units other than those described above are to be connected,
•
please consult your audio dealer.
Using an external unit
Listening to an external source
(See above for external unit connection)
1. Press [AUX].
2. Start playback from the external source. (For details, refer to the
The unit comes on.
external unit’s instruction manual.)
AUX
Remote control only
This is a 24-hour clock.
1 Press [
ff
f] to turn the unit on.
ff
2 Press [CLOCK/TIMER ADJ] to select “CLOCK”.
3 Within 10 seconds
gg
Press [
g/∂] or [µ/
gg
Press and hold to change the time faster.
ff
f] to set the time.
ff
4 Press [CLOCK/TIMER ADJ].
The time is set and the original display is restored.
To switch to clock display
Press [DISPLAY].
Every time you press the button:
Clock display ↔ Current display
Displaying the clock when the unit is ON:
Press [CLOCK/TIMER ADJ].
The clock is shown for about 10 seconds.
Note
The clock is accurate to within ±60 seconds a month.
Readjust if necessary.
Timer operations
Reference
9
RQT6736
Using the timers
y
AUX
TUNER/BAND
TUNING M ODE
LIVE VIRT UALIZER
PLAY MODE
VOLUME
DISP
SLEEP
PGM/
CLEAR
CD
CK
TIMER ADJ
TIMER
ON/OFF
CLCLOCK
TIMER
ON/OFF
5
TIMER ADJ
DISP
LAYAYSLEEP
EQEQLIVE VIRTUALIZER
AUX
TUNER/BAND
TUNING MODE
PGM/
VOLUME
–CLEAR
PLAY MODE
CD
Using the play timer
Remote control only
The play timer can be set to on at a certain time to wake you up.
Preparations:
Turn the unit on and set the clock (A page 9).
•
Prepare the music source you want to listen to: CD, radio or aux,
•
and set the volume.
1 Press [CLOCK/TIMER ADJ] to select the timer function.
Every time you press the button:
CLOCK OFF TIMEON TIME
Previous displa
ON TIME: to set the start time
OFF TIME: to set the finish time
Setting the start and finish times
4
To cancel the timer
Press [TIMER ON/OFF] to clear the timer indicator from the display.
The timer comes on at the set time everyday if the timer is on.
To change the settings (when the unit is on)
To change the play times
Do steps 1, 2, 3 and 5.
To change the source or volume
1. Press [TIMER ON/OFF] to clear the timer indicator from the display.
2. Make changes to the source or volume.
3. Do steps 4 to 5.
To check the settings (when the unit is off)
Press [CLOCK/TIMER ADJ].
The settings are shown in the following order:
start time→finish time→source→volume→current time
You can enjoy other sources after you have set the timer.
Turn the unit off before the timer’s start time.
Note
If you turn the unit off and on again while a timer is functioning, the
•
finish time setting will not be activated.
If the unit is on, the timer will not function. The unit must be in the
•
standby mode.
If AUX is selected as the source, when the timer comes on, the
•
system turns on and engages AUX as the source. If you want to
playback from a connected unit, set that unit’s timer to the same
time. (See the connected unit’s instruction manual.)
Using the sleep timer
Remote control only
Set the unit to stop and turn off after a certain time.
While enjoying the desired source:
Press [SLEEP] to select the desired time.
Every time you press the button:
SLEEP 90 SLEEP 120SLEEP 60SLEEP 30
OFF
2 During “ON TIME” display
(within 10 seconds or so)
1 Press [
gg
g/∂] or [µ/
gg
2 Press [CLOCK/TIMER ADJ].
3 During “OFF TIME” display
1 Press [
2 Press [CLOCK/TIMER ADJ].
The start and finish times are now set.
Turning the timer on
gg
g/∂] or [µ/
gg
4 Press [TIMER ON/OFF] to display “
Timer operations
The settings are shown in the following order:
Start time → Finish time
(The indicator doesn’t appear if the clock hasn’t been set.)
5 Press [
The unit must be off for the timer to operate.
Play will start in the set condition at the set time with volume
increasing gradually to the set level.
ff
f] to turn the unit off.
ff
ff
f] to select the start time.
ff
ff
f] to select the finish time.
ff
rr
rPLAY”
rr
To cancel the sleep timer
Press [SLEEP] to select “OFF”.
To confirm the remaining time
(only while unit is ON)
Press [SLEEP].
The remaining time is shown for about 5 seconds.
To change the setting
Press [SLEEP] to select the new setting.
Note
The play and sleep timer can be used together.
The sleep timer always has priority. Be sure not to overlap timer
settings.
10
RQT6736
Troubleshooting guide
Before requesting service, make the checks below. If you can’t fix the system as described below, or if something not listed here occurs, refer to the
enclosed directory to locate an Authorized Service Center convenient to you or contact your dealer.
Reference pages are shown as black circled numbers 4.
Common Problems
No sound.
Sound stops.
Sound is unfixed, reversed or
comes from one speaker
only.
Humming heard during play.
“ERROR” is displayed.
“– –:– –” appears on the
display at standby mode.
“F76” is displayed.
Listening to the radio
A beat sound is heard.
Turn the volume up.
Switch off the unit, determine and correct the cause, then switch the unit on. Causes include shorting of
the positive and negative speaker wires, straining of the speakers through excessive volume or power,
and using the unit in a hot environment.
Check the speaker connections. 4
An AC mains lead or fluorescent light is near the cables. Keep other appliances and cords away from this
unit’s cables.
Incorrect operation performed. Read the instructions and try again.
You plugged the AC adaptor in for the first time or there was a power failure recently. Set the time. 9
There is a power supply problem. Consult the dealer.
Turn the TV off or separate it from the unit.
A low hum or noise is heard
during AM broadcasts.
Separate the antenna from other cables and cords. Keep the AM antenna away from the unit.
When there is a television set nearby
The picture on the TV
disappears or stripes
appear on the screen.
The location and orientation of the antenna are incorrect.
The TV antenna wire is too close to the unit. Separate the antenna wire of the TV set from the unit.
Playing discs
The display is wrong or
play won’t start.
CD-RW cannot be read.
The disc may be upside down. 6
Wipe the disc.
Replace the disc if it is scratched, warped, or non-standard.
Condensation may have formed inside the unit due to a sudden change in temperature. Wait about an
hour for it to clear and try again.
The disc was incompletely formatted. Use the recording equipment to fully format the disc before recording.
Remote control
Remote control doesn’t
work.
Check that the battery is inserted correctly. 4
Replace the battery if it is worn.
Specifications
Radio
Frequency range
FM 87.50–108.00 MHz (50 kHz steps)
AM 522–1629 kHz (9 kHz steps)
CD Player
Sampling frequency 44.1 kHz
Decoding 16 bit linear
Beam source Semiconductor laser (wavelength 780 nm)
(For Norge)
Bølgelengde 780 nm
Laserstyrke Ingen farlig stråling
(med sikkerhets - beskyttelse)
Number of channels 2 channel, stereo
Wow and flutter Below measurable limit
D/A converter MASH (1 bit DAC)
sendes ut
General
Speakers
Full range 7 cm, 4 Ω x 2
Ceramic tweeter 1.52 cm x 2
Jacks
Output PHONES: 3.5 mm stereo (32 Ω)
Power requirement
AC adaptor DC 10V, 1.2A
Power consumption 18W
AC
For Europe 230 V, 50 Hz
For the United Kingdom, Australia and N.Z.
230–240 V, 50 Hz
Dimensions (WxHxD) 298 x 197 x 141 mm
Mass
With speakers 2.7 kg
Without speakers 1.5 kg
Power consumption in standby mode: 1.3 W
Note
Specifications are subject to change without notice.
Mass and dimensions are approximate.
Timer operations
Reference
11
RQT6736
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A
•
BOOKCASE, BUILT-IN CABINET OR IN ANOTHER
CONFINED SPACE. ENSURE THE UNIT IS WELL
VENTILATED. TO PREVENT RISK OF ELECTRIC
SHOCK OR FIRE HAZARD DUE TO OVERHEATING,
ENSURE THAT CURTAINS AND ANY OTHER
MATERIALS DO NOT OBSTRUCT THE VENTILATION
VENTS.
DO NOT OBSTRUCT THE UNIT’S VENTILATION
•
OPENINGS WITH NEWSPAPERS, TABLECLOTHS,
CURTAINS, AND SIMILAR ITEMS.
DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH
•
AS LIGHTED CANDLES, ON THE UNIT.
DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY
•
FRIENDLY MANNER.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS
TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND
THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS
VASES, SHALL BE PLACED ON THE APPARATUS.
THIS UNIT IS INTENDED FOR USE IN MODERATE
CLIMATES.
TÄMÄ LAITE ON TARKOITETTU KÄYTETTÄVÄKSI
LEUDOSSA ILMASTOSSA.
DETTE APPARATET ER BEREGNET TIL BRUK UNDER
MODERATE KLIMAFORHOLD.
Maintenance
Timer operations
If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
• Never use alcohol, paint thinner or benzine to clean this unit.
• Before using a chemically treated cloth, read the instructions that
came with the cloth carefully.
SUOMI
VAROITUS!
LAITTEEN KÄYTTÄMINEN MUULLA KUIN TÄSSÄ KÄYTTÖOHJEESSA MAINITULLA TAVALLA SAATTAA ALTISTAA KÄYTTÄJÄN TURVALLISUUSLUOKAN 1 YLITTÄVÄLLE NÄKYMÄTTÖMÄLLE LASERSÄTEILYLLE.
VAROITUS!
ÄLÄ ASENNA TAI LAITA TÄTÄ LAITETTA KABINET-
•
TITYYPPISEEN KIRJAKAAPPIIN TAI MUUHUN SULJETTUUN TILAAN, JOTTA TUULETUS ONNISTUISI. VARMISTA,
ETTÄ VERHO TAI MIKÄÄN MUU MATERIAALI EI HUONONNA TUULETUSTA, JOTTA VÄLTETTÄISIIN YLIKUUMENEMISESTA JOHTUVA SÄHKÖISKU- TAI TULIPALOVAARA.
ÄLÄ PEITÄ LAITTEEN TUULETUSAUKKOJA SANOMALEH-
•
DELLÄ, PÖYTÄLIINALLA, VERHOLLA TAI MUULLA
VASTAAVALLA ESINEELLÄ.
ÄLÄ ASETA PALAVAA KYNTTILÄÄ TAI MUUTA AVOTULEN
•
LÄHDETTÄ LAITTEEN PÄÄLLE.
HÄVITÄ PARISTOT LUONTOA VAHINGOITTAMATTOMAL-
•
LA TAVALLA.
VAROITUS:
TULIPALO-, SÄHKÖISKUVAARAN TAI TUOTETTA KOHTAAVAN
MUUN VAHINGON VÄHENTÄMISEKSI EI LAITETTA SAA
ALTISTAA SATEELLE, KOSTEUDELLE, VESIPISAROILLE TAI
ROISKEELLE, EIKÄ NESTETTÄ SISÄLTÄVIÄ ESINEITÄ, KUTEN
ESIMERKIKSI MALJAKOITA, SAA ASETTAA LAITTEEN PÄÄLLE.
NORSK
ADVARSEL!
DETTE PRODUKTET ANVENDER EN LASER.
BETJENING AV KONTROLLER, JUSTERINGER ELLER
ANDRE INNGREP ENN DE SOM ER BESKREVET I DENNE
BRUKSANVISNING, KAN FØRE TIL FARLIG BESTRÅLING.
DEKSLER MÅ IKKE ÅPNES, OG FORSØK ALDRI Å REPARERE APPARATET PÅ EGENHÅND. ALT SERVICE OG
REPARASJONSARBEID MÅ UTFØRES AV KVALIFISERT
PERSONELL.
ADVARSEL!
APPARATET MÅ IKKE PLASSERES I EN BOKHYLLE, ET
•
INNEBYGGET KABINETT ELLER ET ANNET LUKKET
STED HVOR VENTILASJONSFORHOLDENE ER
UTILSTREKKELIGE. SØRG FOR AT GARDINER ELLER
LIGNENDE IKKE FORVERRER VENTILASJONSFORHOLDENE, SÅ RISIKO FOR ELEKTRISK SJOKK ELLER BRANN
FORÅRSAKET AV OVERHETING UNNGÅS.
APPARATETS VENTILASJONSÅPNINGER MÅ IKKE
•
DEKKES TIL MED AVISER, BORDDUKER, GARDINER OG
LIGNENDE.
PLASSER IKKE ÅPEN ILD, SLIK SOM LEVENDE LYS,
•
OPPÅ APPARATET.
BRUKTE BATTERIER MÅ KASSERES UTEN FARE FOR
•
MILJØET.
ADVARSEL:
FOR Å REDUSERE FAREN FOR BRANN, ELEKTRISK STØT
ELLER SKADER PÅ PRODUKTET, MÅ DETTE APPARATET IKKE
UTSETTES FOR REGN, FUKTIGHET, VANNDRÅPER ELLER
VANNSPRUT. DET MÅ HELLER IKKE PLASSERES
GJENSTANDER FYLT MED VANN, SLIK SOM BLOMSTERVASER,
OPPÅ APPARATET.
12
RQT6736
Matsushita Electric Industrial Co., Ltd.
Web Site: http://www.panasonic.co.jp/global/
En
RQT6736-1B
G0203CP1043
Loading...