Panasonic SC-EN5PC, SC-EN53PC, SC-EN53P, SC-EN5P User Manual
TIMER ADJ
DISPLAY SLEEP PGM/–CLEAR
EQ
LIVE VIRTUALIZER
AUX
TUNER/BAND
TUNING MODE
CLOCK
TIMER
ON/OFF
PLAY MODE
CD
VOLUME
CD Stereo System
Operating Instructions
The illustrations show SC-EN5.
Model No. SC-EN5
SC-EN53
P PC
Before connecting, operating or adjusting this product, please read these
instructions completely.
Please keep this manual for future reference.
RQT6734-1P
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions
carefully.
These instructions are applicable to the SC-EN5 and SC-EN53 stereo
systems and the supplied RAPX0042 speakers.
The model number and serial number of this product can be
found on either the back or the bottom of the unit.
Please note them in the space provided below and keep for
future reference.
MODEL NUMBER
SERIAL NUMBER
User memo:
DATE OF PURCHASE
DEALER NAME
DEALER ADDRESS
TELEPHONE NUMBER
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE
OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
Table of contents
Supplied accessories .............................................. 3
Listening caution ..................................................... 3
IMPORTANT SAFETY INSTRUCTIONS ................... 4
The remote control .................................................. 5
Placement of speakers ............................................ 5
Set-up ....................................................................... 6
Front panel controls ................................................ 7
CDs ........................................................................... 8
The radio: manual tuning ...................................... 10
The radio: preset tuning........................................ 10
Sound quality ......................................................... 11
External unit connections ..................................... 11
Using an external unit ........................................... 11
Using headphones (not included) ........................ 11
Setting the time...................................................... 11
Using the timers .................................................... 12
Troubleshooting guide .......................................... 13
Maintenance ........................................................... 13
Limited Warranty (ONLY FOR U.S.A.) .................. 14
Customer Services Directory
(ONLY FOR U.S.A.) ................................................ 14
Specifications ........................................................ 15
Product Service ..................................................... 15
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK
OR PRODUCT DAMAGE, DO NOT EXPOSE THIS
APPARATUS TO RAIN, MOISTURE, DRIPPING OR
SPLASHING AND THAT NO OBJECTS FILLED WITH
LIQUIDS, SUCH AS VASES, SHALL BE PLACED
ON THE APPARATUS.
CAUTION:
TO PREVENT ELECTRIC SHOCK MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE,
BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE.
ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT
RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO
OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER
MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.
For Canada only
Inside of product
2
RQT6734
Supplied accessories
Please check and identify the supplied accessories.
Use numbers indicated in parentheses when asking
for replacement parts.
(Only for U.S.A.)
To order accessories contact 1-800-332-5368 or
web site (http://www.panasonic.com).
Remote control
transmitter ....................... 1 pc.
(EUR7101010)
AM loop antenna ............. 1 pc.
(G0ZZ00002036)
AC adaptor .............. 1 pc.
(RFEA201C-T)
Battery .................... 1 pc.
CR 2032
THE FOLLOWING APPLIES ONLY IN THE U.S.A.:
CAUTION:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and re-
•
ceiver.
Connect the equipment into an outlet on a circuit different
•
from that to which the receiver is connected.
Consult the dealer or an experienced radio/ TV technician
•
for help.
Any unauthorized changes or modifications to this equipment
would void the user’s authority to operate this device.
Listening caution
Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to
consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of
your equipment by playing it at a safe level. One that lets the sound
come through loud and clear without annoying blaring or
distortion—and, most importantly, without affecting your sensitive
hearing.
We recommend that you avoid prolonged exposure to excessive
noise.
Sound can be deceiving. Over time your hearing “comfort level”
adapts to higher volumes of sound. So what sounds “normal” can
actually be loud and harmful to your hearing.
Guard against this by setting your equipment at a safe level BEFORE
your hearing adapts.
To establish a safe level:
Start your volume control at a low setting.
•
Slowly increase the sound until you can hear it comfortably and
•
clearly, and without distortion.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
Once you have established a comfortable sound level:
Set the dial and leave it there.
•
Taking a minute to do this now will help to prevent hearing damage
or loss in the future. After all, we want you listening for a lifetime.
3
RQT6734
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions
listed below. Keep these operating instructions handy for future reference.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with
the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9) Do not defeat the safety purpose of the polarized or groundingtype plug. A polarized plug has two blades with one wider than
the other. A grounding-type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided
for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused
for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally,
or has been dropped.
4
RQT6734
The remote control Placement of speakers
Batteries
A
PUSH
2
1
PUSH
1
3
The battery holder of this remote control comes with a safety lock.
•
To open, use a pin (not included) or similar object to push into hole
A and pull out the battery holder,
Insert the battery with the positive (+) side facing down.
•
Do not use rechargeable type batteries.
•
CAUTION:
The battery used in this device may present a risk of fire or
chemical burn if mistreated. Do not recharge, disassemble,
heat above 100˚C (212˚F), or incinerate. Replace battery with
Panasonic part number CR 2032 only. Use of another battery
may present a risk of fire or explosion.
Speakers are designed identically so that no left or right channel
orientation is necessary.
Notes
• Keep your speakers at least 10 mm (
for proper ventilation.
13
/32˝) away from the system
• These speakers do not have magnetic shielding. Do not place them
near televisions, personal computers or other devices easily
influenced by magnetism.
• To avoid damage to the speakers, do not touch the speaker cones
if you have taken the nets off.
Caution
Use the speakers only with the recommended
•
system. Failure to do so may lead to damage to
the amplifier and/or the speakers, and may result
in the risk of fire. Consult a qualified service
person if damage has occurred or if you
experience a sudden change in performance.
Do not attach these speakers to walls or ceilings.
•
Dispose of used battery promptly. Keep away from children.
Do not disassemble and do not dispose of in fire.
Use
Remote control
signal sensor
30
Transmission
window
Aim at the sensor, avoiding obstacles, at a maximum range of 7
meters directly in front of the unit.
Keep the transmission window and the unit’s sensor free from dust.
•
Operation can be affected by strong light sources, such as direct
•
sunlight, and the glass doors on cabinets.
˚
30
˚
About 7 meters in front of
the signal sensor
Do not:
put heavy objects on the remote control.
•
take the remote control apart.
•
spill liquids onto the remote control.
•
5
RQT6734
Loading...