Panasonic PV-IQ604, PV-IQ504 Owner’s Manual

Panason,c

Palrncol,dci , IQ

Camcorder

Operating Instructions

(PV-IQ604 shown)

PV-IQ504

PV-IQ604

Before attempting to connect, operate or adjust this product, please read these instructions thoroughly. Spanish Quick Use Guide is included. Gufa para r&pida consulta en espaSol est& incluida.

Consists of PV-IQ504D/PV-A16

Consists of PV-IQ604D/PV-A16

VQTW0465

Thattk you lbr choosing Panttsonic!

You have purchased one of the most sophisticated and reliable products on the market

today. Used properly, we're sure it will bring you

and your family years of enjoyment. Please take time to fill inthe information at right. The serial

number is on the tag located on the underside of your Palmcorder. Be sure to retain this manual as your convenient Palmcorder information source.

These accessories are provided in order to set up

or use your Palmcorder.

1 pc. AC Adaptor (PV-A16)

with DC Power Cable

1 pc. Battery Pack (PV-BP15: PV-IQ504) (PV-BP17: PV-IQ604)

/Date of Purchase

Dealer Purchased From

Dealer Address

Dealer Phone No.

Model No.

Serial No.

5W Color Enhancement Light (VUAW0481) (PV-L5)

(supplied: PV-IQ604) (optional: PV-IQ504)

1 pc. Audio/Video Cable (VJAW0020)

1 pc. VHS PlayPak (PV-P1) and one "AA" battery

(VYMW0_

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

Your Compact VHS Palmcorder is designed to

record and play back in Standard Play (SP) and Super Long Play (SLP) modes. You can also play a Compact VHS Palmcorder recording on your VHS VCR using the VHS PlayPak supplied.

CAUIlON; 10 RI:DLJGk 1HE RISKOF LLECIH_C ,SHOCK,

DO NOT R_MOV1ECOVER (OR BACK)

NO USER-SERVICEABLE pARTS IN._

REFER SERVI<_N(3TO QUAUREO SERVICE RERSONNEL

1 pc. 8-Function Remote (VSQW0009) with one

CR2025 Battery

Remotehas beenloaded with battery

and comes stored in Palmcorder.

See page 18.

1 pc. CR2025 Clock

Battery (VSBW0004)

This Palmcorder is equipped with the HQ System

to provide excellent video pictures, and is

compatible with standard VHS equipment. It is recommended that only cassette tapes that have been tested and inspected for use in VCR machines with the _]_] and/or _ mark be

used. This symbol warns the user that uninsulated

voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is

dangerous to make any kind of contact with any inside part of this unit.

This symbol alerts the user that important

literature concerning the operation and

maintenance of this unit has been included.

Therefore, it should be read carefully in order to avoid any problems.

1 pc. Shoulder Strap (VYCW0038)

Read Instructions -- All the safety and operating instructions should be read before the unit is operated.

Retain Instructions -- The safety and operating instructions should be retained for future reference.

Heed Warnings -- All warnings on the unit and in the

operating instructions should be adhered to.

Follow Instructions -- All operating and maintenance instructions should be followed.

Cleaning -- Unplug this video unit from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a dry cloth for cleaning.

Attachments -- Do not use attachments not recommended by the video product manufacturer as they

may be hazardous.

Water and Moisture -- Do not use this video unit near water -- for example near a bath tub, wash bowl, kitchen

sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.

Accessories -- Do not place this video unit on an

unstable cart, stand, tripod, bracket, or table. The video

unit may fall, causing serious injury to a child or adult, and serious damage to the unit. Use only with a cart, stand, tripod, bracket, or table recommended by the

manufacturer, or sold with the video unit. Any mounting of the unit should follow the manufacturer's instructions

and should use a mounting

accessory recommended by the

manufacturer. An appliance and cart

combination should be moved with

care. Quick stops, excessive force,

and uneven surfaces may cause the

appliance and cart combination to

overturn.

11.

Grounding or Polarization --This video unit may be equipped with either a polarized 2-wire AC (Alternating Current) line plug (a plug having one blade wider than the other) or 3-wire grounding type plug, a plug having a third (grounding) pin.

The 2-wire polarized plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug.

If the plug still fails to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

The 3-wire grounding type plug will fit into a grounding

type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding type plug.

12.

Power-Cord Protection -- Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords of plugs, convenience receptacles, and the point where they exit from the unit.

13.

Outdoor Antenna Grounding -- If an outside antenna or cable system is connected to the video unit, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Part 1 of the Canadian Electrical Code, in

USA Section 810 of the National Electrical Code, provides information with respect to proper grounding of

the mast and supporting structure, grounding of the lead- in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for

the grounding electrode.

Ventilation -- Slots and openings in the cabinet are

provided for ventilation and to ensure reliable operation

of the video unit and to protect it from overheating. These

openings must not be blocked or covered. Never place

the video unit on a bed, sofa, rug, or other similar

surface, or near or over a radiator or heat register. This

video unit should not be placed in a built-in installation

such as a bookcase or rack unless proper ventilation is

provided or the manufacturer's instructions have been

adhered to.

10. Power Sources -- This video unit should be operated only from the type of power source indicated on the

marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or

local power company. For video units intended to be

operated from battery power, or other sources, refer to the operating instructions.

ANTENNA

,L'I"_ LEAD IN

WIRE

_GROUNZ)

.,,_DISCHARG E UNIT

_ I (.ECSECT,ON81_ol

_ANTENNA

IJ_"==='-aR°°"°c°'"Ps

NEC -- NATIONAL ELECTRICAL CODE (NEC ART 250, PART H)

14. Lightning -- For added protection of this video unit receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it

from the wall outlet and disconnect the antenna or cable

system. This will prevent damage to the video unit due to lightning and power-line surges.

15. Power Lines --An outside antenna system should not be located in the vicinity of overhead power lines or other

electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep

from touching such power lines or circuits as contact with

them might be fatal.

16. Overloading -- Do not overload wall outlets and extension cords as this can result in a risk of fire or

electric shock.

17. Objects and Liquids -- Never push objects of any kind into this video unit through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any

kind onto the video unit.

18. Servicing -- Do not attempt to service this video unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19. Damage Requiring Service -- Unplug ttliS video unit from the wall outlet and refer servicing to qualified service

personnel under the following conditions: a. When the power-supply cord or plug is damaged. b. If any liquid has been spilled onto, or objects have

fallen into the video unit.

c. If the video unit has been exposed to rain or water. d. If the video unit does not operate normally by

following the operating instructions. Adjust only those

controls that are covered by the operating instructions, as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the video unit to its normal operation.

e. If the video unit has been dropped or the cabinet has

been damaged.

f. When the video unit exhibits a distinct change in

performance -- this indicates a need for service.

20.

Replacement Parts -- When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have

the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric shock or other hazards.

21.

Safety Check-- Upon completion of any service or repairs to this video unit, ask the service technician to perform safety checks to determine that the video unit is

in safe operating order.

USE & LOCATION

• TO AVOID SHOCK HAZARD ... Your Camcordel al_d power supply should not be exposed to rain or moisture.

Do not connect the power supply or operate your Camcorder if it gets wet. Your Camcorder has been designed for outdoor use, however it is not designed to sustain direct exposure to water, rain, sleet, snow, or a direct splashing from a pool or even a cup of coffee. Do not attempt to disassemble this unit. There are no user serviceable parts inside. Unplug your Camcorder from the power supply before cleaning.

• DO NOT AIM YOUR CAMCORDER AT THE SUN OR OTHER BRIGHT OBJECTS

• DO NOT EXPOSE YOUR CAMCORDER TO EXTENDED HIGH TEMPERATURE ... Such as, in direct

sunlight, inside a closed ear, next to heater, etc... This action could permanently damage the internal parts of your Camcorder.

• AVOID SUDDEN CHANGES IN TEMPERATURE ... If the unit issuddenly moved from a cold place to a warm place, moisture may form on the tape and inside the unit.

• DO NOT LEAVE YOUR CAMCORDER OR THE POWER SUPPLY TURNED ON WHEN NOT IN USE

• STORAGE OF YOUR CAMCORDER ... Store and handle your Camcorder in a manner that will not subject it to

unnecessary movement (avoid shaking and striking). Your Camcorder contains a sensitive pick-up device which could be damaged by improper handling or storage.

CARE

• TO CLEAN YOUR CAMCORDER ... Do not use strong or abrasive detergents when cleaning your Camcorder body.

• TO PROTECT THE LENS ... Do nottouch the surface of the lens with your hand. Use a commercial camcorder lens solution and lens paper when cleaning the lens. Improper cleaning can scratch the lens coating.

• TO PROTECT THE FINISH OF YOUR CAMCORDER ... Before handling your Camcorder, make sure your hands and face are free from any chemical products such as suntan lotion as it may damage the finish.

Getting Started

Things You Should Know ........................................................................................................2

Important Safeguards and Precautions .............................................................................. 3

Palmcorder Accessory System ............................................................................................. 6

Attaching the Shoulder Strap ................................................................................................. 7

Supplying Power .........................................................................................................................8

Battery Care ................................................................................................................................ 10

Cassette Information ................................................................................................................11

Setting the Date/Time ..............................................................................................................12

Electronic Viewfinder Indications ......................................................................... 13

Color Enhancement Light (PV-IQ504: optional, PV-IQ604: supplied) ........................... 15

Basic Operation

Camera Recording ................................................................................................ 16

8-Function Remote Control .................................................................................. 18

Playback your Recordings .................................................................................................... 19

Special Features

Four Speed Power Zoom ............................................................................................................... 22

Audiofideo Fade In/Out ............................................................................................................... 22

Focusing ........................................................................................................................................ 23

High Speed Shutter ....................................................................................................................... 24

Backlight Button ............................................................................................................................. 24

Digital Zoom ................................................................................................................................... 25

Digital Electronic Image Stabilization System (D.E.I.S.) .................................................................. 26

Still/Strobe/Wide ............................................................................................................................. 27

Copying your Tapes (dubbing) ............................................................................. 28

For Your Information

Notes On Operations ............................................................................................ 29

Spanish Quick Use Guide/Guia Para Uso Rdpido ............................................... 31

Index of Controls ....................................................................................................................... 33

Index ..............................................................................................................................................37

Specifications ............................................................................................................................. 38

Before Requesting Service .................................................................................................... 39

This operating instruction book is designed for use with models PV-IQ504 and PV-IQ604.

Illustrations in this manual show the PV-IQ604. Features may vary, so please read carefully.

For inlolJ_latioll a lid Oldering instl uc[iol is, see the separate Selection Guide and Accessory Order Porto.

Power Supplies

Supplied Accessories

AC Adaptor

(PV-A16)

2.4Ah Battery Pack (with PV-IQ604)

(PV-BP17)

To Transport

Supplied Accessories

1.2Ah Battery Pack (with PV-IQ504)

(PV-BP15)

Optional Accessories

Car Battery Cord

(PV-C16)

Optional Accessories

Connection

Supplied Accessories Optional Accessories

Audio/Video Cable

(VJAW0020)

To Record and Playback

Supplied Accessories

VHS PlayPak

(PV-P1)

RF Adaptor

(PV-RF15)

Optional Accessories

Compact Video

Cassette Tape

(NV-TC20P,

NV-TC30P)

Shoulder Strap

(VYCW0038)

System Carrying Case

(PV-H18)

For Special Effects

To Enhance your Recording

Optional Accessories

5W Color Enhancement

Video Corrector

(PV-CCS0)

TO Copy your Tapes (with V_uleo/Audio)

Supplied Accessories

Audio/Video Cable

(VJAW0020)

VCR (not supplied)

Supplied Accessories Optional Accessories

Telephoto Lens

Light

(with PV-IQ604)

(PV-L5)

(PV-LT49)

Make sure the Battery Pack is not attached.

Pinch the tabs together on either side of the clasp and open the buckle.

Unhook the strap from the Buckle Catch.

Thread the strap ends through the Strap Attachment Rings. Then re-hook them onto

the Buckle Catch.

_Hand Strap_

Snap the clasp shut to lock the strap in place.

Pull a loop of the strap loose from the buckle, then pull the strap firmly through

the buckle to adjust the length.

Adjust the length to the size ot your hand

using the illustration at left as a guide.

II _

.................. I

Indicator

3 (A)

(B)'

_aotntnfir/mCha rgiMgrke_'_r_

Charge the Battery Pack fully before operation.

Plug in the AC Adaptor. 8A_ER*

Insert the Battery Slide the top of the Battery forward then

press down until itlocks with a click.

• BatteryPackchargesinabout1 hour.(PV-IQ504)

• BatteryPackchargesinabout2 hours.(PV-IQ604)

Remove the Battery

(A) Slide Battery forward.

(B) Lift up and out. BATTERY

• With a fully chargedBattery Pack, you will haw

about 0.8 hourof continuoususe. (PV-IQ504)

• Witha fully chargedBattery Pack,you willhav_ about 1.5hoursof continuoususe. (PV-IQ604)

Use the Battery completely before recharging.

Note:

After recharging the Battery Pack about 5

times, use the BATTERY REFRESH feature as explained on page 10.

*Use this marker as a reminder to yourself

when the battery is fully charged or in need of a charge. This marker performs no

function and is for your reference only.

POWER CHARGE

,,1/

Power Indicator

POWER CHARGE

ChargeIndicator lightsup.

POWER CHARGE

o o (____

Charge Indicatorgoes out when charging is done.(About one hour.)

REFRESH

lights up.

BA'I-rERY REFRESH

REFRESH

To Attach the Battery

Align the battery with the top oi th_ mounting surface and press it firmly into

place until it locks with a click.

To Remove the Battery

While sliding the BATTERY RELEASE button, remove the Battery from the

mounting surface.

_ooC_nput

nnectorj/

Power Indicator Lamp

_c output__ _ __

_onnectorJ []

DC Input "_

onnecto_)

Connect the DC Output on the AC Adaptor to the DC Input on the

Palmcorder with the DC Power Cable

(supplied).

Plug in the AC Adaptor.

• The Power indicator will light up.

POWER CHARGE

Note:

AC Adaptor does not function while

charging the Battery.

BATTERY

REFRESH

]

Connect a PV-C16 Car Battery Cord to the DC Input of the Palmcorder.

Cigarette Lighter_

ocket (12V) .i/

Ciigarette

ghter Plug

Start your car engine and then insert the Car Battery Cord plug into your cigarette lighter socket.

• There is a fuse located in the lighter plug end of the cord.

Should fuse replacement be necessary use the exact current rating (in amps).

Note:

This cord can only be used in vehicles

equipped with DO 12V (negative ground) batteries.

Use only the specified car battery cord.

This feature completely discharges the

Battery before recharging begins. To keep your Battery in top condition,

use Refresh after about every 5 charges.

Ni-Cd

A'I-I'ENTION:

The product that you have purchased is powered by a rechargeable battery. The battery is recyclable. At the end of its useful

life, under various state and local laws, it

may be illegal to dispose of this battery into

the municipal waste stream. Check with your

local solid waste officials for details in your

area for recycling options or proper disposal.

Caution:

• Charge only with specified charger.

• The battery pack can be charged with!n a temperature range of 32° F (0° C) and 104°

F (40° C).

• The battery pack may be warm after

charging or just after use. This is normal.

• Do not use an insufficiently charged or worn

out battery pack.

Place the Battery into the AC Adaptor.

BATTERY REFRESH

Press the BATTERY REFRESH button. The Charging indicator will flash when

discharging begins and stop flashing when

complete.

• Should you accidentally press the BATTERY REFRESH button, remove the

battery pack and then re-insert it to begin charging.

• It takesabout5 hourswhenbothBatteryRefresh andchargingareperformed.(PV-IQ504)

• Ittakesabout10 hourswhenboth Battery Refreshandchargingare performed.(PV-IQ604)

To avoid damage to the

Battery Pack:

• Do not drop or jar the battery pack.

• Use the battery pack with specified units only.

• If the battery pack is used in extremely high temperatures, a safety device will

automatically prevent operation.

Safety precautions:

• Do not get the battery near, or dispose of in, fire.

• Do not directly connect (short circuit) the positive (+) and negative (-) terminals.

• Never attempt to disassemble or reassemble the battery pack.

To insure longer battery life:

• While not in use, remove battery pack from the Palmcorder and AC Adaptor and store in a cool, dark, dry place.

• Keep the battery pack terminals clean.

Use tapes with the _ mark in this unit.

Tape Speed Selector

Position

SP (Standard Play) SLP (Super Long Play)

T-20

20 Minutes One Hour

Cassette type

T-30 T-40

30 Minutes 40 Minutes

One Hour Two Hours 30 Minutes

Connect the Palmcorder to a power source.

]

Turn the Tape Wheel in the direction of the arrow until there is no slack.

TAPE

EJECT

Slide the TAPE EJECT switch to open the door.

Sliding tab

Insert the cassette vertically with the

window facing away from the Palmcorder

body.

Press PUSH TO CLOSE to close the door.

Cassettes have a record tab to ensure that recordings are not accidentally erased.

A To prevent accidental erasure

Break offthe tab with a screwdriver. (Some tapes have a sliding tab.)

g To record again

Cover the hole with cellophane tape.

The date and time is calculated, including leap

year, up to Dec. 31, 2089. This function operates on a miniature battery (supplied).

1 2

i How to remove the Battery.

_{_) O Bendthe locktab outward.

REPLACE BATTERY WITH PANASONIC PART NO. VSBW0004 (CR2025) ONLY. USE OF ANOTHER

BATTERY MAY PRESENT A RISK OF FIRE OR EXPLOSION. CAUTION-BATTERY MAY EXPLODE IF

MISTREATED. DISPOSE OF USED BATTERY PROMPTLY. KEEP AWAY FROM CHILDREN.

DO NOT RECHARGE, DISASSEMBLE OR DISPOSE OF IN FIRE.

Q Removethe battery.

While pinching the stopper tabs, pull the tray out of the Battery Compartment.

Insert the battery (supplied) into the Battery tray with the _) mark facing down until it snaps into place.

• Do not reverse the polarity.

Replace the Battery tray so that the small triangle marks meet.

Note:

replacing the battery.

i ake sure your Palmcorder is off when

Keep the Battery out of the reach of children since swallowing it may be harmful.

is discharged, or missing, the words

i hen the Battery is installed improperly,

"CLOCK BATTERY" appears on the EVF. Battery life is approximately 5 years.

CLOCK

2,4

Connect the Palmcorder to a power source.

Set the POWER switch to VCR or

CAMERA.

ROWER

'_R CAMERA

sssE.,ect,tosta I

the first portion flashing, l,, .,

Press SET repeatedly (or hold down)

to enter the desired numbers. Then, press SEL(ect) to fix that portion

and move to the next.

Repeat until the hour, minute, month, day and year have been entered.

Press SEL(ect) again to lock in

all the settings and start the clock. Press DISPLAY twice to O,SPLAV

remove display from EVF. (_ Note:

Whenever "12:00AM JAN. 1 1994" appears,

it indicates that the clock needs adjustment.

+ 26 hidden pages