Panasonic PT-VW345NZU, PT-VX415NZU User Manual
Operating Instructions
Functional Manual
LCD Projector
Model No.
PT-VW345NZ
Commercial Use
PT-VX415NZ
Thank you for purchasing this Panasonic Product.
This manual is intended for products manufactured from Nov. 2013 and beyond. ■
Before operating this product, please read the instructions carefully, and save this manual ■
for future use.
Before using your projector, be sure to read “Read this rst!” ( ■
pages 2 to 12).
Æ
ENGLISH
TQBJ0597-1
Read this rst!
Read this rst!
2 - ENGLISH
WARNING:
WARNING:
The sound pressure level at the operator position is equal or less than 70 dB (A) according to ISO 7779.
WARNING:
Remove the plug from the mains socket when this unit is not in use for a prolonged period of time.1.
To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualied 2.
service personnel.
Do not remove the earthing pin on the mains plug. This apparatus is equipped with a three prong earthing 3.
type mains plug. This plug will only t an earthing-type mains socket. This is a safety feature. If you are un-
able to insert the plug into the mains socket, contact an electrician. Do not defeat the purpose of the earthing
plug.
CAUTION:
Product information (for Turkey only)
THIS APPARATUS MUST BE EARTHED.
To prevent damage which may result in re or shock hazard, do not expose this appliance to rain
or moisture.
This device is not intended for use in the direct eld of view at visual display workplaces. To avoid
incommoding reexions at visual display workplaces this device must not be placed in the direct
eld of view.
The equipment is not intended for used at a video workstation in compliance BildscharbV.
To assure continued compliance, follow the attached installation instructions. This includes using
the provided power cord and shielded interface cables when connecting to computer or peripheral
devices. Also, any unauthorized changes or modications to this equipment could void the user's
authority to operate this device.
EEE Yönetmeliğine Uygundur.
EEE Complies with Directive of Turkey.
WARNING:
o
7
This is a device to project images onto a screen, etc., and is not intended for use as indoor lighting in a domestic
environment.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT
TO RAIN OR MOISTURE.
The lightning ash with arrowhead symbol, within an equilateral triangle, is intended to alert the
user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may
be of sufcient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the
product.
Directive 2009/125/EC
Importer's name and address within the European Union
Panasonic Marketing Europe GmbH
Panasonic Testing Center
Winsbergring 15, 22525 Hamburg, Germany
Read this rst!
ENGLISH - 3
CAUTION (North/Middle/South America and Taiwan)
CAUTION:
This equipment is equipped with a three-pin grounding-type power
plug. Do not remove the grounding pin on the power plug. This plug
will only t a grounding-type power outlet. This is a safety feature. If
you are unable to insert the plug into the outlet, contact an electrician.
Do not defeat the purpose of the grounding plug.
Do not remove
FCC NOTICE (USA)
Declaration of Conformity
Model Number: PT-VW345NZ, PT-VX415NZ
Trade Name: Panasonic
Responsible Party: Panasonic Corporation of North America
Address: Two Riverfront Plaza, Newark, NJ 07102-5490
Telephone number: (877)803-8492
E-mail: projectorsupport@us.panasonic.com
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
To assure continued compliance, follow the attached installation instructions and do not make any unauthorized
modications.
CAUTION:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the
following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/BD technician for help.
Any changes or modications not expressly approved by Panasonic Corp. of North America could void the
user's authority to operate this device.
This device is restricted to indoor use when operated in the 5.15 to 5.25 GHz frequency range.
The user may nd the booklet “Something About Interference” available from FCC local regional ofces helpful.
FCC Warning:
To assure continued FCC emission limit compliance, follow the attached installation instructions. This includes
using the provided power cord and shielded interface cables when connecting to computer or peripheral
devices. Also, any unauthorized changes or modications to this equipment could void the user's authority to
operate this device.
Read this rst!
4 - ENGLISH
FCC NOTICE (USA AND CANADA)
This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation of this device.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
This product is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range.
FCC and IC require this product to be used indoors for the frequency range 5.15 to 5.25 GHz to reduce the
potential for harmful interference to co-channel Mobile Satellite systems. High power radars are allocated
as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause
interference with and/or damage this product.
The available scientic evidence does not show that any health problems are associated with using low power
wireless devices.
There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless
devices emit low levels of radio frequency energy (RF) in the microwave range while being used.
Whereas high levels of RF can produce health effects (by heating tissue), exposure to low-level RF that does
not produce heating effects causes no known adverse health effects.
Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested
that some biological effects might occur, but such ndings have not been conrmed by additional research.
Wireless LAN adaptor has been tested and found to comply with FCC/IC radiation exposure limits set forth for
an uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to
OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules.
NOTIFICATION (Canada)
This class B digital apparatus complies with Canadian ICES-003.
Product Identication Marking is located on the bottom of the Wireless LAN Adaptor.
Federal Communication Commission (FCC) / IC Radiation Exposure Statement
This EUT is compliance with SAR for general population/uncontrolled exposure limits in ANSI/IEEE C95.11999/IC RSS-102 and had been tested in accordance with the measurement methods and procedures specied
in OET Bulletin 65 Supplement C/IEEE 1528. This equipment should be installed and operated with minimum
distance 0.5 cm between the radiator & your body.
CAUTION:
Be aware of the following limits before using the Wireless LAN Module.
To use the Wireless LAN Module, an access point needs to be obtained. •
Do not use the Wireless LAN Module to connect to any wireless network (SSID*) for which you do not have •
usage rights. Such networks may be listed as a result of searches. However, using them may be regarded
as illegal access.
*SSID is a name for identifying a particular wireless network for transmission.
Do not subject the Wireless LAN Module to high temperatures, direct sunlight or moisture. •
Do not bend, or subject the Wireless LAN Module to strong impacts. •
Do not disassemble or alter the Wireless LAN Module in any way. •
Do not attempt to install the Wireless LAN Module in any incompatible device. •
Do not remove the Wireless LAN Module from the host product during operations. •
Data transmitted and received over radio waves may be intercepted and monitored. •
To avoid malfunctions caused by radio wave interface, keep the host product away from the devices such as •
other wireless LAN devices, microwaves and the devices that use 2.4 GHz and 5 GHz signals when using
the Wireless LAN Module.
When noises occur due to the static electricity, etc., the host product might stop operating for the protection •
of the devices. In this case, turn the host product Off with Mains power On / Off switch, then turn it On again.
Depending on the area, this Wireless LAN Module may not be available. •
Read this rst!
ENGLISH - 5
WARNING:
Not for use in a computer room as dened in the Standard for the Protection of Electronic Computer/Data •
Processing Equipment, ANSI/NFPA 75.
For permanently connected equipment, a readily accessible disconnect device shall be incorporated in the •
building installation wiring.
For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily •
accessible.
Notice (USA only):
This product has a High Intensity Discharge (HID) lamp that contains mercury. Disposal may be regulated •
in your community due to environmental considerations. For disposal or recycling information, please visit
Panasonic website: http://www.panasonic.com/environmental or call 1-888-769-0149.
Notice (Singapore only):
Complies with IDA Standards ID : DB102345 •
NCC
802.11b/802.11g/BT警語:
第十二條 → 經型式認證合格之低功率射頻電機。非經許可，公司，商號或使用者均不得擅自變更頻率、加大功
率或變更原設計之特性及功能。
第十四條 → 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並
改善之無干擾時方得繼續使用。
前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波
輻射性電機設備之干擾。
802.11a 警語:
在5.25-5.35秭赫頻帶內操作之無線資訊傳輸設備，限於室內使用。（4.7.5）
本模組於取得認證後將依規定於模組本體標是審驗合格標籤。
系統廠商應於平臺上標示”本產品內含射頻模組： CCAI13LP2410T9”字樣。
(ii)
(i)
(ii)
(i)
Read this rst!
6 - ENGLISH
To remove the battery
1. Press the guide and lift the cover. 2. Remove the batteries.
Brazil Only
Brasil Apenas
Manuseio de baterias usadas
BRASIL
Após o uso, as pilhas e /ou baterias deverão
ser entregues ao estabelecimento comercial
ou rede de assistência técnica autorizada.
Cobrir os terminais positivo (+) e negativo (-) com uma fita isolante adesiva, antes de depositar numa
caixa destinada para o recolhimento. O contato entre partes metálicas pode causar vazamentos,
gerar calor, romper a blindagem e produzir fogo. (Fig. 1)
Fig. 1
Como isolar os terminais
Não desmonte, não remova o invólucro, nem amasse a bateria. O gás liberado pela bateria pode irritar a
garganta, danicar o lacre do invólucro ou o vazamento provocar calor, ruptura da blindagem e produzir fogo
devido ao curto circuito dos terminais. Não incinere nem aqueça as baterias, elas não podem car expostas
a temperaturas superiores a 100 °C (212 °F). O gás liberado pela bateria pode irritar a garganta, danicar
o lacre do invólucro ou o vazamento provocar calor, ruptura da blindagem e produzir fogo devido ao curto
circuito dos terminais provocado internamente.
Evite o contato com o liquido que vazar das baterias. Caso isto ocorra, lave bem a parte afetada
com bastante água. Caso haja irritação, consulte um médico.
Remoção das baterias
Fita Isolante
Fita Isolante
1. Pressione a guia e levante a tampa. 2. Remova as baterias.
Read this rst!
ENGLISH - 7
WARNING:
POWER
The wall outlet or the circuit breaker shall be installed near the equipment and shall be easily accessible when problems occur. If the following problems occur, cut off the power supply immediately.
Continued use of the projector in these conditions will result in re or electric shock.
If foreign objects or water get inside the projector, cut off the power supply. z
If the projector is dropped or the cabinet is broken, cut off the power supply. z
If you notice smoke, strange smells or noise coming from the projector, cut off the power supply. z
Please contact an Authorized Service Center for repairs, and do not attempt to repair the projector yourself.
During a thunderstorm, do not touch the projector or the cable.
Electric shocks can result.
Do not do anything that might damage the power cord or the power plug.
If the power cord is used while damaged, electric shocks, short-circuits or re will result.
Do not damage the power cord, make any modications to it, place it near any hot objects, bend it
z
excessively, twist it, pull it, place heavy objects on top of it or wrap it into a bundle.
Ask an Authorized Service Center to carry out any repairs to the power cord that might be necessary.
Insert the power plug securely into the wall outlet.
If the plug is not inserted correctly, electric shocks or overheating will result.
Do not use anything other than the provided power cord. z
Do not use the provided power cord for other electrical equipment. z
Do not use plugs which are damaged or wall outlets which are coming loose from the wall. z
Clean the power plug regularly to prevent it from becoming covered in dust.
Failure to observe this will cause a re.
If dust builds up on the power plug, the resulting humidity can damage the insulation.
z
If not using the projector for an extended period of time, pull the power plug out from the wall outlet.
z
Pull the power plug out from the wall outlet and wipe it with a dry cloth regularly.
Do not handle the power plug with wet hands.
Failure to observe this will result in electric shocks.
Do not overload the wall outlet.
If the power supply is overloaded (ex., by using too many adapters), overheating may occur and re will result.
ON USE/INSTALLATION
Do not place liquid containers on top of the projector.
If water spills onto the projector or gets inside it, re or electric shocks will result.
If any water gets inside the projector, contact an Authorized Service Center.
Do not place the projector on soft materials such as carpets or sponge mats.
Doing so will cause the projector to overheat, which can cause burns, re or damage to the projector.
Do not set up the projector in humid or dusty places or in places where the projector may come into
contact with oily smoke or steam, ex. a bathroom.
Using the projector under such conditions will result in re, electric shocks or components deterioration. Components deterioration (such as ceiling mount brackets) may cause the projector which is mounted on the ceiling
to fall down.
Do not install this projector in a place which is not strong enough to take the full weight of the projector or on top of a surface which is sloped or unstable.
Failure to observe this will cause projector to fall down or tip over the projector, and severe injury or damage
could result.
Do not place another projector or other heavy objects on top of the projector.
Failure to observe this will cause the projector to become unbalanced and fall, which could result in damage or
injury. The projector will be damaged or deformed.
Installation work (such as ceiling mount bracket) should only be carried out by a qualied technician.
If installation is not carried out and secured correctly it can cause injury or accidents, such as electric shocks.
Do not use anything other than an authorized ceiling mount bracket. z
Be sure to use the wire provided with the projector mount bracket for ceiling mount as an extra safety mea- z
sure to prevent the projector from falling down (Install in a different location to the ceiling mount bracket).
Do not cover the air intake port or the air exhaust port.
Doing so will cause the projector to overheat, which can cause re or damage to the projector.
Do not place the projector in narrow, badly ventilated places. z
Do not place the projector on cloth or papers, as these materials could be drawn into the air intake port. z
Read this rst!
8 - ENGLISH
WARNING:
Do not place your hands or other objects close to the air exhaust port.
Doing so will cause burns or damage your hands or other objects.
Heated air comes out of the air exhaust port. Do not place your hands or face, or objects which cannot z
withstand heat close to this port.
Do not look and place your skin into the lights emitted from the lens while the projector is being used.
Doing so can cause burns or loss of sight.
Strong light is emitted from the projector’s lens. Do not look or place your hands directly into this light. z
Be especially careful not to let young children look into the lens. In addition, turn off the power and discon- z
nect the power plug when you are away from the projector.
Do not insert any foreign objects into the projector.
Doing so will cause re or electric shocks.
Do not insert any metal objects or ammable objects into the projector or drop them onto the projector. z
Never attempt to remodel or disassemble the projector.
High voltages can cause re or electric shocks.
For any inspection, adjustment and repair work, please contact an Authorized Service Center. z
Do not project an image with the lens cap attached.
Doing so can cause re.
Do not allow metal objects, ammable objects, or liquids to enter inside of the projector. Do not allow
the projector to get wet.
Doing so may cause short circuits or overheating, and result in re, electric shock, or malfunction of the projec-
tor.
Do not place containers of liquid or metal objects near the projector. z
If liquid enters inside of the projector, consult your dealer. z
Particular attention must be paid to children. z
Use the ceiling mount bracket specied by Panasonic.
Defects in the ceiling mount bracket will result in falling accidents.
Attach the supplied safety cable to the ceiling mount bracket to prevent the projector from falling down. z
ACCESSORIES
Do not use or handle the batteries improperly, and refer to the following.
Failure to observe this will cause burns, batteries to leak, overheat, explode or catch re.
Use AAA/R03 or AAA/LR03 batteries. z
Do not use unspecied batteries. z
Do not disassemble dry cell batteries. z
Do not heat the batteries or place them into water or re. z
Do not allow the + and z
laces or hairpins.
Do not store or carry batteries together with metallic objects. z
Store the batteries in a plastic bag and keep them away from metallic objects. z
Make sure the polarities (+ and z
Do not use a new battery together with an old battery or mix different types of batteries. z
Do not use batteries with the outer cover peeling away or removed. z
Remove the empty batteries from the remote control at once. z
Insulate the battery using tape or something similar before disposal. z
Do not allow children to reach the batteries (AAA/R03 or AAA/LR03 type).
The battery can cause personal injury if swallowed. z
If swallowed, seek medical advice immediately. z
If the battery uid leaks, do not touch it with bare hands, and take the following measures if necessary.
Battery uid on your skin or clothing could result in skin inammation or injury. z
Rinse with clean water and seek medical advice immediately.
Battery uid coming in contact with your eyes could result in loss of sight. z
In this case, do not rub your eyes. Rinse with clean water and seek medical advice immediately.
-
terminals of the batteries to come into contact with metallic objects such as neck-
-
) are correct when inserting the batteries.
Read this rst!
ENGLISH - 9
WARNING:
Do not disassemble the lamp unit.
If the lamp breaks, it could cause injury.
Lamp replacement
The lamp has high internal pressure. If improperly handled, an explosion and severe injury or accidents will
result.
The lamp can easily explode if struck against hard objects or dropped. z
Before replacing the lamp, be sure to disconnect the power plug from the wall outlet. z
Electric shocks or explosions can result if this is not done.
When replacing the lamp, turn the power off and allow the lamp it to cool for at least 1 hour before handling z
it otherwise it can cause burns.
Do not allow infants or pets to touch the remote control unit.
Keep the remote control unit out of the reach of infants and pets after using it. z
Do not use the supplied power cord with devices other than this projector.
Using the supplied power cord with devices other than this projector may cause short circuits or overheat- z
ing, and result in electric shock or re.
Remove the depleted batteries from the remote control promptly.
Leaving them in the unit may result in uid leakage, overheating, or explosion of the batteries. z
CAUTION:
POWER
When disconnecting the power cord, be sure to hold the power plug and power connector.
If the power cord itself is pulled, the lead will become damaged, and re, short-circuits or serious electric
shocks will result.
When not using the projector for an extended period of time, disconnect the power plug from the wall
outlet and remove the batteries from the remote control.
Disconnect the power plug from the wall outlet before carrying out any cleaning and replacing the unit.
Electric shocks can result if this is not done.
ON USE/INSTALLATION
Do not place heavy objects on top of the projector.
Failure to observe this will cause the projector to become unbalanced and fall, which could result in damage or
injury. The projector will be damaged or deformed.
Do not put your weight on this projector.
You could fall or the projector could break, and injury will result.
Be especially careful not to let young children stand or sit on the projector. z
Do not place the projector in extremely hot locations.
Doing so will cause the outer casing or internal components to deteriorate, or result in re.
Take particular care in locations exposed to direct sunlight or near stoves. z
Always disconnect all cables before moving the projector.
Moving the projector with cables still attached can damage the cables, which will cause re or electric shocks to
occur.
Never plug headphones and earphones into VARIABLE AUDIO OUT jack.
Excessive sound pressure from earphones and headphones can cause hearing loss.
ACCESSORIES
Do not use the old lamp unit.
If used it could cause lamp explosion.
If the lamp has broken, ventilate the room immediately. Do not touch or bring your face close to the
broken pieces.
Failure to observe this will cause the user to absorb the gas which was released when the lamp broke and which
contains nearly the same amount of mercury as uorescent lamps, and the broken pieces will cause injury.
If you believe that you have absorbed the gas or that the gas has got into your eyes or mouth, seek medical z
advice immediately.
Ask your dealer about replacing the lamp unit and check the inside of the projector. z
Read this rst!
10 - ENGLISH
13A250V
BS1363/A
HE-8
N
ASA
L
IMPORTANT: THE MOULDED PLUG (U.K. only)
FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.
This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 13 amp fuse
is tted in this plug. Should the fuse need to be replaced, please ensure that the replacement fuse has a rating
of13 amps and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark or the BSI mark on the body of the fuse.
If the plug contains a removable fuse cover, you must ensure that it is retted when the fuse is replaced. If you
lose the fuse cover, the plug must not be used until a replacement cover is obtained. A replacement fuse cover
can be purchased from an Authorised Service Center.
If the tted moulded plug is unsuitable for the mains socket in your home, then the fuse should be
removed and the plug cut off and disposed of safely. There is a danger of severe electrical shock if the
cut off plug is inserted into any 13 amp socket.
If a new plug is to be tted, please observe the wiring code as shown below.
If in any doubt, please consult a qualied electrician.
WARNING:
THIS APPLIANCE MUST BE EARTHED.
IMPORTANT:
The wires in this mains lead are coloured in accordance with the following code:
Green - and - Yellow: Earth
Blue: Neutral
Brown: Live
As the colours of the wire in the mains lead of this appliance may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows.
The wire which is coloured GREEN - AND - YELLOW must be connected to the terminal in the
plug which is marked with the letter E or by the Earth symbol or coloured GREEN or GREEN AND - YELLOW.
The wire which is coloured BLUE must be connected to the terminal in the plug which is marked
with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal in the plug which is marked
with the letter L or coloured RED.
How to replace the fuse: Open the fuse compartment with a screwdriver and replace the fuse.
Trademarks r
Windows f
Corporation in the United States and other countries.
Macintosh and Mac, Mac OS, OS X, and Safari are trademarks of Apple Inc., registered in the United States and other f
countries.
HDMI, the HDMI logo and High-Denition Multimedia Interface is a trademark or registered trademark of HDMI f
Licensing LLC.
PJLink f
RoomView, Crestron RoomView are registered trademarks of Crestron Electronics, Inc, and Crestron Connected f
Fusion RV are trademarks of Crestron Electronics, Inc.
Adobe, Adobe Flash Player and Adobe Reader are trademarks or registered trademarks of Adobe Systems Inc. in the United f
States and/or other countries.
Some of the fonts used in the on-screen menu are Ricoh bitmap fonts, which are manufactured and sold by Ricoh Company, f
Ltd.
Miracast is a trademark of Wi-Fi Alliance. f
Android is a registered trademark of Google Inc. f
iPad, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. f
Other names, company names or product names used in these operating instructions are the trademarks or registered f
trademarks of their respective holders.
Please note that the operating instructions do not include the ® and ™ symbols.
Illustrations in these operating instructions r
Note that illustrations of the projector and screens may differ from the ones you actually see. f
Page references r
In these instructions, references to pages are indicated as: ( f Æ page 00).
Term r
In these instructions, the “Wireless remote control unit” accessory is referred to as the “Remote control”. f
®
, Windows Vista®, Internet Explorer® and PowerPoint® are registered trademarks or trademarks of Microsoft
™
is a trademark or pending trademark in Japan, the United States, and other countries and regions.
™
and
Read this rst!
ENGLISH - 11
Declaration of Conformity
Declaration of Conformity (DoC)
This equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Customers can download a copy of the original DoC for this product from our DoC server: http://www.doc.panasonic.de
Contact in the EU: Panasonic Services Europe, a Division of Panasonic Marketing Europe GmbH, Panasonic Testing Centre,
Winsbergring 15, 22525 Hamburg, F.R.Germany
This product is intended to be used in the following countries.
Austria, Belgium, Bulgaria, Czech, Cyprus, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovenia, Slovak, Spain, Sweden, Switzerland, UK &
Croatia
Konformitätserklärung (KE)
Dieses Gerät entspricht den grundlegenden Anforderungen und den weiteren entsprechenden Vorgaben der Richtlinie 1999/5/EU.
Kunden können eine Kopie der Original-KE für dieses Produkt von unserem KE-Server herunterladen: http://www.doc.panasonic.de
Kontaktadresse in der EG: Panasonic Services Europe, a Division of Panasonic Marketing Europe GmbH, Panasonic Testing Centre,
Winsbergring 15, 22525 Hamburg, F.R.Germany
Dieses Produkt ist für den Einsatz in den folgenden Ländern vorgesehen.
Österreich, Belgien, Bulgarien, Tschechische Republik, Zypern, Dänemark, Estland, Finnland, Frankreich, Deutschland, Griechenland,
Ungarn, Island, Irland, Italien, Lettland, Litauen, Luxemburg, Malta, Niederlande, Norwegen, Polen, Portugal, Rumänien, Slowenien,
Slowakei, Spanien, Schweden, Schweiz, Großbritannien und Kroatie
Déclaration de Conformité (DC)
Cet appareil est conforme aux exigences essentielles et aux autres dispositions pertinentes de la Directive 1999/5/EC.
Les clients peuvent télécharger une copie de la DC originale pour ce produit à partir de notre serveur DC: http://www.doc.panasonic.de
Coordonnées dans l’UE : Panasonic Services Europe, a Division of Panasonic Marketing Europe GmbH, Panasonic Testing Centre,
Winsbergring 15, 22525 Hamburg, F.R.Germany
Ce produit est conçu pour l’utilisation dans les pays suivants.
Autriche, Belgique, Bulgarie, République Tchéquie, Chypre, Danemark, Estonie, Finlande, France, Allemagne, Grèce, Hongrie, Islande,
Irlande, Italie, Lettonie, Lituanie, Luxembourg, Malte, Pays-Bas, Norvège, Pologne, Portugal, Roumanie, Slovénie, Slovaquie, Espagne,
Suède, Suisse, Royaume-Uni et Croatie
Declaración de conformidad (DC)
Este equipo cumple con los requisitos esenciales asi como con otras disposiciones de la Directiva 1999/5/CE.
El cliente puede descargar una copia de la DC original de este producto desde nuestro servidor DC: http://www.doc.panasonic.de
Contacto en la U.E.: Panasonic Services Europe, a Division of Panasonic Marketing Europe GmbH, Panasonic Testing Centre,
Winsbergring 15, 22525 Hamburg, F.R.Germany
Este producto ha sido desarrollado para el uso en los siguientes países.
Austria, Bélgica, Bulgaria, República Checa, Chipre, Dinamarca, Estonia, Finlandia, Francia, Alemania, Grecia, Hungría, Islandia, Irlanda,
Italia, Letonia, Lituania, Luxemburgo, Malta, Holanda, Noruega, Polonia, Portugal, Rumania, Eslovenia, Eslovaquia, España, Suecia,
Suiza, el Reino Unido y Croacia
Dichiarazione di conformità (DoC)
Questo apparato é conforme ai requisiti essenziali ed agli altri principi sanciti dalla Direttiva 1999/5/CE.
I clienti possono scaricare la copia del DoC originale per questo prodotto dal nostro server DoC: http://www.doc.panasonic.de
Contatto nella EU: Panasonic Services Europe, a Division of Panasonic Marketing Europe GmbH, Panasonic Testing Centre,
Winsbergring 15, 22525 Hamburg, F.R.Germany
I prodotti sono stati prodotti per l’uso nei seguenti paesi.
Austria, Belgio, Bulgaria, Repubblica Ceca, Cipro, Danimarca, Estonia, Finlandia, Francia, Germania, Grecia, Irlanda, Islanda, Italia,
Lettonia, Lituania, Lussembugo, Malta, Olanda, Norvegia, Polonia, Portogallo, Romania, Regno Unito, Slovenia, Slovacchia, Spagna,
Svezia, Svizzera, Ungheria, Croazia
Important Safety Notice
Important
Information
Read this rst!
12 - ENGLISH
Features of the Projector
Easy Setting Function
Quick Steps
For details, see the corresponding pages.
This projector is installed with a camera, ▶
[FOCUS ASSIST], [SCREEN FIT] and
[COLORBOARD] will be adjusted in order
when you press the <EASY SETTING>
button on the control panel.
The position of image will be corrected ▶
automatically when you press the
<AUTO SETUP> button on the remote
control.
Wireless Projection Function
This function allows you to output video ▶
and audio from multiple computers by
using the application software "Wireless
Manager ME6.0".
This function is to project the displayed ▶
images on the Miracast-certied device
to the projector through the wireless LAN
connection.
Useful Functions for Presentations
Set up your projector. 1.
(Æpage 31)
Connect with other devices. 2.
(Æpage 35)
Connect the power cord. 3.
(Æpage 40)
Power on. 4.
(Æpage 42)
Make initial settings. 5.
page 24)
(
Æ
Take this step when you power on for the rst time after f
purchasing the projector.
Memory viewer function allows you to ▶
project video and still images which are
stored in USB memory without using
computer.
Connect the projector to a computer with ▶
a USB cable, the USB display function of
the application software "Wireless Manager
ME6.0" allows you to output video and
audio.
Select the input signal. 6.
(Æpage 44)
Adjust the image. 7.
(Æpage 44)
ENGLISH - 13
Contents
14 - ENGLISH
Contents
Contents
Read this first! ............................................2
Declaration of Conformity ......................................11
Chapter 1 Preparation
Precautions for use ................................................. 17
Cautions when transporting .................................. 17
Cautions when installing ....................................... 17
Security ................................................................ 18
Disposal ................................................................ 18
Cautions on use ................................................... 19
Notes on Using Wireless Connection ................... 20
Accessories .......................................................... 22
Contents of the supplied CD-ROM ....................... 23
Optional accessories ............................................ 23
Start-up display ....................................................... 24
Initial setting (display language) ........................... 24
Initial setting (projector setup) .............................. 24
About your projector ............................................... 25
Remote control ..................................................... 25
Projector body ...................................................... 26
Using the remote control ........................................ 29
Inserting and Removing batteries ......................... 29
Setting Remote control ID numbers ..................... 29
Chapter 2 Getting Started
Setting up ................................................................. 31
Installation mode .................................................. 31
Parts for ceiling mount (Optional) ......................... 31
Screen size and throw distance ........................... 32
Adjusting adjustable feet ...................................... 34
Connecting ............................................................... 35
Before connecting ................................................ 35
Connecting example : AV equipment ................... 37
Connecting example : Computers ........................ 37
Connecting example : Audio ................................. 38
Chapter 3 Basic Operations
Powering on/off ....................................................... 40
Connecting the power cord .................................. 40
ON(G)/STANDBY(R) indicator.............................. 41
Powering On the Projector ................................... 42
Making adjustments and selections ..................... 42
Powering Off the Projector ................................... 43
Direct Power Off function ..................................... 43
Projecting ................................................................. 44
Selecting the input signal ..................................... 44
How to adjust the state of the image .................... 44
Adjusting the projected image via EASY
SETTING function ............................................. 45
Basic operations by using the remote control ..... 47
Be sure to read “Read this rst!” from page 2.
Using the AUTO SETUP function ......................... 47
Using the KEYSTONE button ............................... 47
Controlling the volume of the speaker .................. 48
Using the FUNCTION button ................................ 48
Switching the input signal ..................................... 48
Using the MEMORY VIEWER function ................ 49
Using the Miracast function .................................. 49
Using the Panasonic APPLICATION function ...... 49
Using the PAGE UP/PAGE DOWN buttons .......... 49
Using the DIGITAL ZOOM function ...................... 50
Using the FREEZE function ................................. 50
Using the AV MUTE function ................................ 51
Using the P IN P function ..................................... 51
Using the P-TIMER function ................................. 52
Using the MUTE function ..................................... 52
Chapter 4 Settings
Menu Navigation ...................................................... 54
Navigating through the menu ............................... 54
Resetting adjustment values to the factory
default ................................................................ 55
Main menu ............................................................ 55
Sub menu ............................................................. 56
[PICTURE] menu ...................................................... 58
[PICTURE MODE] ................................................ 58
[CONTRAST] ........................................................ 58
[BRIGHTNESS] .................................................... 59
[COLOR] ............................................................... 59
[TINT] ................................................................... 59
[SHARPNESS] ..................................................... 59
[COLOR TEMPERATURE] ................................... 60
[IRIS] .................................................................... 60
[ADVANCED MENU] ............................................ 60
[DAYLIGHT VIEW] ................................................ 61
[DIGITAL CINEMA REALITY] ............................... 61
[NOISE REDUCTION] .......................................... 61
[TV-SYSTEM] ....................................................... 62
[RGB/YPBPR]/[RGB/YCBCR] ................................ 62
[POSITION] menu .................................................... 63
[KEYSTONE] ........................................................ 63
[SHIFT] ................................................................. 64
[DOT CLOCK]....................................................... 65
[CLOCK PHASE] .................................................. 65
[OVER SCAN] ...................................................... 65
[ASPECT] ............................................................. 66
[FRAME LOCK] .................................................... 66
[LANGUAGE] menu ................................................. 67
[LANGUAGE] ....................................................... 67
[DISPLAY OPTION] menu ....................................... 68
[ON-SCREEN DISPLAY] ...................................... 68
[HDMI SIGNAL LEVEL] ........................................ 69
[CLOSED CAPTION SETTING] ........................... 69
[SCREEN SETTING] ........................................... 70
ENGLISH - 15
Contents
[STARTUP LOGO] ................................................ 70
[AUTO SETUP SETTING] .................................... 71
[SIGNAL SEARCH] .............................................. 71
[BACK COLOR] .................................................... 71
[WIDE MODE] ...................................................... 71
[SXGA MODE] ...................................................... 71
[P-TIMER] ............................................................. 72
[P IN P] ................................................................. 73
[OTHER FUNCTIONS] ......................................... 73
[PROJECTOR SETUP] menu .................................. 74
[STATUS] .............................................................. 74
[COMPUTER2 SELECT] ...................................... 74
[PROJECTOR ID] ................................................. 74
[INITIAL START UP] ............................................. 75
[PROJECTION METHOD] .................................... 75
[HIGH ALTITUDE MODE] ..................................... 75
[LAMP POWER] ................................................... 76
[ECO MANAGEMENT] ......................................... 76
[EMULATE] ........................................................... 77
[FUNCTION BUTTON] ......................................... 78
[AUDIO SETTING] ............................................... 78
[EASY SETTING] ................................................. 80
[TEST PATTERN] ................................................. 80
[FILTER COUNTER]............................................. 80
[INITIALIZE ALL] .................................................. 81
[SECURITY] menu ................................................... 82
[PASSWORD] ....................................................... 82
[PASSWORD CHANGE] ...................................... 82
[TEXT DISPLAY] .................................................. 83
[TEXT CHANGE] .................................................. 83
[MENU LOCK] ...................................................... 83
[MENU LOCK PASSWORD] ................................ 83
[CONTROL DEVICE SETUP] ............................... 84
[NETWORK/USB] menu .......................................... 85
Conrmation of the network information ............... 85
[WIRED LAN] ....................................................... 85
[WIRELESS LAN] ................................................. 86
[CONNECTION LOCK] ........................................ 89
[NAME CHANGE] ................................................. 89
[PASSWORD] ....................................................... 89
[PASSWORD CHANGE] ...................................... 89
[NETWORK CONTROL] ...................................... 90
[AMX D. D.] .......................................................... 90
[Crestron Connected(TM)] .................................... 90
[LIVE MODE CUT IN] ........................................... 90
[MULTI-LIVE] ........................................................ 90
[MEMORY VIEWER] ............................................ 91
[STATUS] .............................................................. 91
[INITIALIZE] .......................................................... 91
Network connections ............................................ 91
Connecting with Wired LAN ................................. 93
Connecting with Wireless LAN ............................. 93
Accessing from the Web browser ......................... 95
Memory Viewer function ......................................110
About Miracast(TM) .............................................113
Chapter 5 Maintenance
LAMP and WARNING Indicators .......................... 115
When an indicator lights up .................................115
Replacement .......................................................... 116
Before performing maintenance/replacement .....116
Maintenance ........................................................116
Replacing the unit ................................................116
Attaching the Lens Cap .......................................119
Troubleshooting .................................................... 120
FAQ ......................................................................... 121
Chapter 6 Appendix
Technical Information ........................................... 123
PJLink protocol ................................................... 123
Control commands via LAN ................................ 124
Serial terminal .................................................... 126
Two window display combination list .................. 129
List of compatible signals ................................... 130
Specications ........................................................ 132
Dimensions ............................................................ 134
Ceiling mount bracket safeguards....................... 135
Glossary ................................................................. 136
Software License ................................................... 138
Software information regarding this product ....... 138
Index ....................................................................... 139
Chapter 1 Preparation
This chapter describes things you need to know or check before using the projector.
16 - ENGLISH
Chapter 1 Preparation - Precautions for use
Precautions for use
Cautions when transporting
When transporting the projector, hold it securely by its bottom and avoid excessive vibration and impacts. Doing so may f
damage the internal parts and result in malfunctions.
Do not transport the projector with the adjustable feet extended. Doing so may damage the adjustable feet. f
Cautions when installing
Do not set up the projector outdoors. r
The projector is designed for indoor use only. f
Do not use under the following conditions. r
Places where vibration and impacts occur such as in a car or vehicle: Doing so may damage the internal parts and result in f
malfunctions.
Near the exhaust of an air conditioner or near lights (studio lamps, etc.) where temperature changes greatly (Operating f
environment Æ page 133): Doing so may shorten the life of the lamp or result in deformation of the outer case and
malfunctions.
Near high-voltage power lines or near motors: Doing so may interfere with the operation of the projector. f
Be sure to ask a specialized technician when installing the product to a ceiling. r
This requires an optional ceiling mount bracket.
Model No.: ET-PKV100H (for high ceilings), ET-PKV100S (for low ceilings),
ET-PKV101B (Projector Mount Bracket).
When using the projector in the elevation of below 1 400 m (4 593'), make sure [HIGH r
ALTITUDE MODE] is set to [OFF].
Failure to do so may shorten the life of the internal parts and result in malfunctions.
When using the projector in the elevation of above 1 400 m ( r
4 593'
) and below 2 000 m
(6 562'), make sure [HIGH ALTITUDE MODE] is set to [HIGH1].
Failure to do so may shorten the life of the internal parts and result in malfunctions.
When using the projector in the elevation of above 2 000 m (6 562') and below 2 700 m r
(8 858'), make sure [HIGH ALTITUDE MODE] is set to [HIGH2].
Failure to do so may shorten the life of the internal parts and result in malfunctions.
Do not install the projector at elevations of 2 700 m (8 858') or higher above sea level. r
Failure to do so may shorten the life of the internal parts and result in malfunctions.
Do not tilt the projector or place it on its side. r
Do not tilt the projector body more than approximately ±40 degrees vertically or ±15 degrees horizontally. Over tilting may
result in shortening the life of the components.
Within 40°
Within 40°
Within 15°
Within 15°
ENGLISH - 17
Cautions when setting the projectors r
18 - ENGLISH
Chapter 1 Preparation - Precautions for use
Do not stack the projectors. f
Do not use the projector supporting it by the top. f
Do not block the ventilation ports (intake and exhaust) of the projector. f
Avoid heating and cooling air from the air conditioning system directly blow to the ventilation ports (intake and exhaust) of f
the projector.
over 500 mm
(19.69")
over 500 mm
(19.69")
Do not install the projector in a conned space. f
When placing the projector in a conned space, a ventilation and/or air conditioning system is required. Exhaust heat may
accumulate when the ventilation is not enough, triggering the protection circuit of the projector.
over 1 000 mm
(39.37")
over 200 mm
(7.87")
Security
Take safety measures against following incidents.
Personal information being leaked via this product. f
Unauthorized operation of this product by a malicious third party. f
Interfering or stopping of this product by a malicious third party. f
Security instruction (Æ pages 82, 89, 105)
Make your password as difcult to guess as possible. f
Change your password periodically. f
Panasonic or its afliate company never inquires a password directly to a customer. Do not tell your password in case you f
receive such an inquiry.
The connecting network must be secured by rewall or others. f
Set a password for web control and restrict the users who can log in f .
Disposal
When disposing of the product, ask your local authority or dealer about the correct methods of disposal.
The lamp contains mercury. When disposing of the used lamp unit, ask your nearest local authorities or dealer
about proper disposal of the unit.
Dispose of used batteries according to the instructions or your local disposal rule or guidelines.
ENGLISH - 19
Chapter 1 Preparation - Precautions for use
Cautions on use
To get a good picture quality r
Draw curtains or blinds over windows and turn off any lights near the screen to prevent outside light or light from indoor f
lamps from shining onto the screen.
Depending on where the projector is used, heated air from an exhaust port or warm or cold air from an air conditioner can f
cause a shimmering effect on screen.
Avoid use in locations where exhaust or streams of air from projector, other devices and air conditioners ow between the
projector and the screen.
The lens of projector is affected by the heat from the luminous source. Because of this, the focusing may not be stable right f
after the power is turned on. Focusing is stabled after projecting image for 30 minutes and longer.
Do not touch the surface of the projector lens with your bare hand. r
If the surface of the lens becomes dirty from ngerprints or anything else, this will be magnied and projected onto the screen.
Attach the supplied lens cap to the projection lens when you do not use the projector.
LCD Panel r
The display unit of this projector comprises three LCD panels. Although an LCD panel is a product of high-precision
technology, some of the pixels on the projected image may be missing or constantly lit. Please note that this is not a
malfunction.
Displaying a still image for a longer time may result in an after-image on the LCD panels. If this happens, display the all white
screen in the test pattern for an hour or more.
Optical components r
Operating the projector in an environment with high temperature or heavy exposure to dust or tobacco smoke will reduce the
service life of the optical components, such as the LCD panel and polarizing plate, and may necessitate their replacement
within less than one year of use. For details, consult your dealer.
Lamp r
The luminous source of the projector is a mercury lamp with high internal pressure.
A high pressure mercury lamp has following characteristics.
The brightness of the lamp will decrease by duration of usage. f
The lamp may burst with sound or shorten life by shock or chipping. f
The life of the lamp varies greatly depending on individual specicities and usage conditions. In particular, continuous use f
over 12 hours and frequent on/off switching of the power greatly deteriorate the lamp and affect the lamp life.
In rare cases, the lamp burst shortly after the projection. f
The risk of bursting increases when the lamp is used beyond its replacement cycle. Make sure to replace the lamp unit f
consistently. (“When to replace the lamp unit” (Æ page 118))
If the lamp bursts, gas contained inside of the lamp is released in a form of smoke. f
It is recommended to store replacement lamps for contingency. f
It is recommended to have authorized engineer or your dealer replace the lamp unit. f
20 - ENGLISH
Chapter 1 Preparation - Precautions for use
Notes on Using Wireless Connection
Wireless connection function of the projector uses radio waves in the 2.4 GHz / 5.0 GHz band.
A radio station license is not required, but be sure to read and fully understand the following items before use.
Do not use near other wireless equipment. r
The following equipment may use radio waves in the same band as the projector.
When the projector is used near these devices, radio wave interference may make communication impossible, or the
communication speed may become slower.
Microwave ovens, etc. f
Industrial, chemical and medical equipment, etc. f
In-plant radio stations for identifying moving objects such as those used in factory manufacturing lines, etc. f
Designated low-power radio stations f
If at all possible, avoid the use of cellular phones, TV sets or radios near the projector. r
Cellular phones, TV sets, radios and similar devices use different radio bands from the projector, so there is no effect on
wireless communication or the transmission and reception of these devices. However, radio waves from the projector may
produce audio or video noise.
Wireless communication radio waves cannot penetrate steel reinforcements, metal, r
concrete, etc.
Communication is possible through walls and oors made from materials such as wood and glass (except
wire mesh), but not through walls and oors made from steel reinforcements, metal, concrete, etc.
glass containing
Avoid using the projector in locations prone to static electricity. r
If the projector is used in a location prone to static electricity, such as on a carpet, the wireless LAN or wired LAN
connection may be lost. “Glossary” (Æpages 136 – 137)
If this happens, eliminate the source of static electricity or electromagnetic noise and reconnect to the wireless LAN or wired
LAN.
In rare cases static electricity or electromagnetic noise may make it impossible to establish a connection to the LAN.
If this happens, press the power button on the remote control or on the projector to power off the projector temporarily.
After <ON(G)/STANDBY(R)> indicator on the projector changes from lighting in orange to lighting/blinking in red/green,
power on the projector and reconnect to the LAN.
Using the projector outside the country r
It is forbidden to take the projector outside the country or region where you purchased it, so use it only in the said country
or region. Also, note that depending on countries or regions there are restrictions on the channels and frequencies at which
you can use the wireless LAN.
Available wireless LAN channels r
The channels (frequency range) that can be used differ according to the country or region. Refer to the table below.
Country or region Standard Channels used Frequency band (Center frequency)
Global
The frequency and channel differ depending on the country.
The passive scanning is performed by changing radio to the channel being scanned in each country.
Please use the wireless LAN feature in compliance with the laws of each country.
For France only
IEEE802.11a/n Passive scanning 5.180 GHz - 5.850 GHz
IEEE802.11b/g/n Passive scanning 2.412 GHz - 2.472 GHz
The wireless LAN feature of this projector shall exclusively be used inside buildings.
ENGLISH - 21
Chapter 1 Preparation - Precautions for use
About Wireless LANs
The advantage of a wireless LAN is that information can be exchanged between a PC or other such equipment and an
access point using radio waves as long as you are within range for radio transmissions.
On the other hand, because the radio waves can travel through obstacles (such as walls) and are available everywhere
within a given range, problems of the type listed below may occur if security-related settings are not made.
A malicious third-part may intentionally intercept and monitor transmitted data including the content of e-mail and f
personal information such as your ID, password, and/or credit card numbers.
A malicious third-party may access your personal or corporate network without authorization and engage in the f
following types of behavior.
Retrieve personal and/or secret information (information leak)
Spread false information by impersonating a particular person (spoong)
Overwrite intercepted communications and issue false data (tampering)
Spread harmful software such as a computer virus and crash your data and/or system (system crash)
Since most wireless LAN adapters or access points are equipped with security features to take care of these problems,
you can reduce the possibility of these problems occurring when using this product by making the appropriate security
settings for the wireless LAN device.
Some wireless LAN devices may not be set for security immediately after purchase. To decrease the possibility of
occurrence of security problems, before using any wireless LAN devices, be absolutely sure to make all security-related
settings according to the instructions given in the operation manuals supplied with them.
Depending on the specications of the wireless LAN, a malicious third-party may be able to break security settings by
special means.
Please contact Panasonic if you need help taking care of security settings or other such.
If you cannot perform security settings for your wireless LAN by yourself, please contact the Panasonic Support Center.
Panasonic asks customers to thoroughly understand the risk of using this product without making security settings, and
recommends that the customer make security settings at their own discretion and responsibility.
Notice about AVC/VC-1/MPEG-4
This product is licensed under the AVC Patent Portfolio License, VC-1 Patent Portfolio License and MPEG-4 Visual Patent
Portfolio License for the personal use of a consumer or other uses in which it does not receive remuneration to (i) encode
video in compliance with the AVC Standard, VC-1 Standard and MPEG-4 Visual Standard ("AVC/VC-1/MPEG-4 Video")
and/or (ii) decode AVC/VC-1/MPEG-4 Video that was encoded by a consumer engaged in a personal activity and/or was
obtained from a video provider licensed to provide AVC/VC-1/MPEG-4 Video. No license is granted or shall be implied for
any other use. Additional information may be obtained from MPEG LA, LLC. See http://www.mpegla.com
22 - ENGLISH
Chapter 1 Preparation - Precautions for use
Accessories
Make sure the following accessories are provided with your projector. Numbers enclosed < > show the number of accessories.
Wireless remote control unit <1>
(N2QAYA000068) (N2QAYA000067)
PT-VW345NZ
PT-VX415NZ
Power cord
CD ROM <1>
(TXFQB02VLK6)
AAA/R03 or AAA/LR03 battery <2>
(TXFSX02UXRZ)
(TXFSX02UYAZ) VGA cable <1>
(K1HY15YY0012)
(
for remote control unit)
(TXFSX02UFEZ) String <1>
(6103504711)
(TXFSX02UTRZ) Lens cap <1>
(TKKL5568)
Attention
After unpacking the projector, discard the power cord cap and packaging material properly. f
Do not use the supplied power cord for devices other than this projector. f
For lost accessories, consult your dealer. f
Store small parts in an appropriate manner, and keep them away from young children. f
Note
The type and number of the power cord depend on the country in which you purchased the product. f
The model numbers of accessories are subject to change without prior notice. f
ENGLISH - 23
Chapter 1 Preparation - Precautions for use
Contents of the supplied CD-ROM
The contents of the supplied CD-ROM are as follow.
Operating Instructions – Functional Manual
Operating Instructions – Multi Projector Monitoring & Control Software
Operating Instructions – Logo Transfer Software
Operating Instructions – Wireless Manager ME6.0
Instruction/list (PDF)
Software
List of Compatible Projector Models
Software license
Multi Projector Monitoring & Control
Software (Windows)
Logo Transfer Software (Windows)
Wireless Manager ME6.0 (Windows/
Mac)
This is a list of projectors that are compatible with the software contained in the
CD-ROM and their restrictions.
GNU GENERAL PUBLIC LICENSE,
GNU LESSER GENERAL PUBLIC
LICENSE
This software allows you to monitor and
control multiple projectors connected to
the LAN.
This software allows you to transfer
original images, such as company logos
to be displayed when projection starts, to
the projector.
This software allows you to send com-
puter screen displays over wireless/wired
LAN.
Optional accessories
Options Model No.
Ceiling Mount Bracket
Projector Mount Bracket
Replacement Lamp Unit
Replacement Filter Unit
Easy Wireless Stick
This product can be purchased in the U.S., Canada, Japan and the European Communities.*1 :
Note
The model numbers of optional accessories are subject to change without prior notice. f
1
*
ET-PKV100H (for high ceilings), ET-PKV100S (for low ceilings)
ET-PKV101B
ET-LAV300
ET-RFV300
ET-UW100
24 - ENGLISH
Chapter 1 Preparation - Start-up display
Start-up display
When the projector is switched on for the rst time after purchase as well as when [INITIALIZE ALL] is executed in the
[PROJECTOR SETUP] menu, then the initial setting screen is displayed. Set them in accordance with circumstances.
In other occasions, you can change the settings by menu operations.
Initial setting (display language)
Select the language to show on the screen.
Press 1) asqw to select the display language.
Press the <ENTER> button to proceed to the initial setting.2)
Initial setting (projector setup)
Set each item.
Press 1) as to select an item.
Press 2) qw to switch the setting.
PT-VW345NZ PT-VX415NZ
[PROJECTION METHOD] ( f
[SCREEN FORMAT] (Only for PT-VW345NZ f
[SCREEN POSITION] (Only for PT-VW345NZ f
[HIGH ALTITUDE MODE] ( f
page 75)
Æ
page 75)
Æ
page 70)
Æ
page 70)
Æ
Press the <ENTER> button.3)
Conrm the setting value and complete the initial setting. f
Note
If you press the <RETURN> button on the initial setting screen, you can go back to the previous screen. f
To continue operations after completed the initial settings, refer to “Selecting the input signal” ( f
page 44).
Æ
ENGLISH - 25
Chapter 1 Preparation - About your projector
About your projector
Remote control
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Remote control signal emitters1
<2 b> button
Turn the projector on.
<AUTO SETUP/CANCEL> button3
Automatically adjusts the image display position while
projecting the image. In addition, it acts as <CANCEL>
button when using the MEMORY VIEWER function.
(Æ page 47)
<MENU> button4
Open or close the On-Screen Menu. (Æ page 54)
<ENTER> button/5 asq(VOL -) w(VOL+) buttons
Navigate the menu display.
Adjust the volume.
<DEFAULT> button6
Resets the content of the sub-menu to the factory
default. (Æ page 55)
<COMPUTER 2> button7
Switches the COMPUTER2 signal to project.
<COMPUTER 1> button8
Switches the COMPUTER1 signal to project.
<Miracast> button9
Switches the Miracast signal to project. (Æ page 49)
<MEMORY VIEWER> button10
Switches the MEMORY VIEWER signal to project.
(Æ page 49)
<ID ALL> button11
Used to simultaneously control all the projectors with one
remote control for a system using multiple projectors.
(Æ page 29)
<ID SET> button12
Sets the ID number of the remote control to use for a
system using multiple projectors. (Æ page 29)
<D.ZOOM +/-> buttons13
Zoom in and out the images. (Æ page 50)
<PAGE UP/PAGE DOWN> buttons14
You can page up or page down les such as PowerPoint
through "Wireless Manager ME6.0". (Æ page 49)
18
19
20
21
22
23
24
25
26
27
28
29
This jack is not used for these
<MUTE> button15
Used to mute the audio. (Æ page 52)
<P IN P> button (Only for PT-VW345NZ)16
Operate the P IN P function. (Æ page 51)
<ON/OFF> switch17
When using the remote control, set this switch to “ON”. Set
it to “OFF” to avoid misoperation when it is not in use.
<18 v> button
Turn the projector off.
Remote control indicator19
Flashes if any button in the remote control is pressed.
<KEYSTONE> button20
Correct keystone distortion. (Æ page 47)
<RETURN> button21
Return to the previous menu or cancel the setting.
<FUNCTION> button22
Assigns a frequently used operation as a shortcut button.
<HDMI> button23
Switches the HDMI signal to project.
<Panasonic APP> button24
Switches the Panasonic APPLICATION signal to project.
<VIDEO/S-VIDEO> button25
Switches the VIDEO signal or S-VIDEO signal to project.
<FREEZE> button26
Pauses the projected image and mute the audio
temporarily. (Æ page 50)
Number buttons27
Act as number buttons. Use these buttons when setting
the remote control codes or entering the password.
<P-TIMER> button28
Operate the P-TIMER function. (Æ page 52)
<AV MUTE> button29
Used to turn off the audio and video temporarily.
(Æ page 51)
projector models.
1.Do not use old battery with new one.
2.Do not use batteries other than the
type specified.
3.Be sure the batteries are inserted properly.
26 - ENGLISH
Chapter 1 Preparation - About your projector
Attention
Do not drop the remote control. f
Avoid contact with liquids. f
Do not attempt to modify or disassemble the remote control. f
Please observe the following contents that are described on f
the back of the remote control unit (see the right picture).
1. Do not use a new battery together with an old battery.
2. Do not use unspecied batteries.
3. Make sure the polarities (+ and -) are correct when inserting the batteries.
In addition, please read the contents that are related to batteries in the "Read this rst!". f
Note
The remote control can be used within a distance of about 7 m (22.97') if pointed directly at the remote control signal f
receiver. The remote control can control at angles of up to ± 30 ° vertically and ± 30 ° horizontally, but the effective control
range may be reduced.
If there are any obstacles between the remote control and the remote control signal receiver, the remote control may not f
operate correctly.
You can operate the projector by reecting the remote control signal on the screen. The operating range may differ due to f
the loss of light caused by the properties of the screen.
When the remote control signal receiver is lit with a uorescent light or other strong light source, the projector may become f
inoperative. Set the projector as far from the luminous source as possible.
Projector body
1 2
4
5
6
3
8 9 10 11
7
WARNING
Keep your hands and other objects away from the air
exhaust port.
Keep your hand and face away. f
Do not insert your nger. f
Keep heat-sensitive articles away. f
Heated air from the air exhaust port can cause burns or
external damage.
Zoom ring (Back)1
Adjust the zoom.
Control Panel and Indicators (2 Æ page 27)
Lamp cover (3
The lamp unit is located inside.
Projection Lens 4
page 118)
Æ
12
13
Focus ring (Front)5
Adjust the focus.
Remote control signal receiver/Camera6
Air exhaust port7
Speaker8
<AC IN> terminal9
Connect the supplied power cord.
Rear terminals (10
Air intake port / Air lter cover (11 Æ page 116)
The air lter unit is inside.
Adjustable feet12
Adjust the projection angle.
Security Chain Hook 13
Attaches a burglar prevention cable, etc.
page 28)
Æ
Attention
Do not block the ventilation ports (intake and exhaust) of the projector. f
ENGLISH - 27
Chapter 1 Preparation - About your projector
Control panel and Indicators r
1
2
3
4
9
5
<1 v/b> button
Turns the projector on/off.
<ON(G)/STANDBY(R)> indicator2
Displays the status of the power.
<LAMP> indicator3
Lights red when the projection lamp reaches its end of
life.
<WARNING> indicator4
Indicates the abnormal conditions of the projector.
Ambient Luminance sensor5
Detects room's light and select proper image quality.
<MENU> button6
Displays the menu screen. (Æ page 54)
10
7
6
8
<ENTER> button7
Executes the selected item.
asqw8 buttons
Navigates the menu screen.
Adjusts the volume level (qw).
<INPUT SELECT> button9
Selects the input signal for projection. (Æ page 48)
<EASY SETTING/CANCEL> button10
Executes the EASY SETTING function.
In addition, it acts as <CANCEL> button when using the
MEMORY VIEWER function.
28 - ENGLISH
Chapter 1 Preparation - About your projector
Rear terminals r
1
7
2
8
9
<COMPUTER 1 IN> terminal1
This is the terminal to input RGB or YPBPR/YCBCR
signals.
<COMPUTER 2 IN/2 1 OUT> terminal
This is the terminal to input RGB signals or output the
RGB/YCBCR/YPBPR signals to external monitor.
<HDMI IN> terminal3
This is the terminal to input HDMI signals.
<USB B (DISPLAY)> terminal4
This terminal is used to connect the projector to the
computer with a USB cable when you want to use
the "USB diaplay" function of the application software
"Wireless Manager ME6.0".
For details, please refer to the "Operating InstructionsWireless Manager ME6.0" in CD-ROM.
<USB A (VIEWER)> terminal5
This terminal is to insert the USB memory directly.
<LAN> terminal6
This is the LAN terminal to connect to the network.
3 4 5 6
11
10
12
13
14
<SERIAL IN> terminal7
This is the RS-232C compatible terminal to externally
control the projector by connecting a computer.
<VIDEO IN> terminal8
This is the terminal to input video signals.
<AUDIO IN 3 (L/R)> terminal9
This is the terminal to input audio signals.
There are a left (L) terminal and a right (R) terminal.
<AUDIO IN 1> terminal10
This is the terminal to input audio signals.
<AUDIO IN 2 (MIC IN)> terminal11
This is the terminal to input audio signals. Or connect the
MIC to this terminal.
<VARIABLE AUDIO OUT> terminal12
This is the terminal to output audio signals input to the
projector.
<S-VIDEO IN> terminal13
This is the terminal to input s-video signals.
Security slot14
Attach the commercial shackle lock, manufactured by
Kensington, to protect your projector. Compatible with
the Kensington MicroSaver Security System.
Attention
When a LAN cable is directly connected to the projector, the network connection must be made indoors. f
(ii)
(i)
ENGLISH - 29
Chapter 1 Preparation - Using the remote control
Using the remote control
Inserting and Removing batteries
Fig. 1
Open the cover. (Fig. 1)1)
Insert batteries and close the cover (Insert the "2) m" side first.). (Fig. 2)
When removing the batteries, perform the steps in reverse order. f
Fig. 2
Setting Remote control ID numbers
When you use the system with multiple projectors, you can operate all the projectors simultaneously or each projector
individually using single remote control, if unique ID number is assigned to each projector.
After setting the ID number of the projector, set the same ID number to the remote control.
The factory default ID number of the projector is set to [ALL]. When using a single projector, press the <ID ALL> button on
the remote control. Also, you can control a projector by pressing the <ID ALL> button on the remote control even if you do not
know the projector ID.
How to set
Press the <ID SET> button on the remote control.1)
Within five seconds, press the one-digit ID number set on the projector using the number (<1> - <6>)2)
buttons.
If you press the <ID ALL> button, you can control the projectors regardless of the ID number setting of the projector. f
Attention
Since the ID number of the remote control can be set without the projector, do not press the <ID SET> button on the remote f
control carelessly. If the <ID SET> button is pressed and no number (<1> - <6>) buttons are pressed within ve seconds, the
ID number returns to its original value before the <ID SET> button was pressed.
The ID number set on the remote control will be stored unless it is set again. However, it will be erased if the remote control f
is left with dead batteries. Set the same ID number again when the batteries are replaced.
Note
Set the ID number of the projector from the [PROJECTOR SETUP] menu → [PROJECTOR ID]. ( f
page 74)
Æ
Chapter 2 Getting Started
This chapter describes things you need to do before using the projector such as the setup and
connections.
30 - ENGLISH
Loading...