Panasonic PT-VW360EJ User Manual
Operating Instructions
Functional Manual
LCD Projector
Model No.
PT-VW360
PT-VX430
Commercial Use
Thank you for purchasing this Panasonic product.
■ This manual is intended for products manufactured from Sep. 2018 and beyond.
■ Before operating this product, please read the instructions carefully, and save this manual
for future use.
■ Before using your projector, be sure to read “Read this rst!” (x pages 4 to 12).
ENGLISH
DPQP1211ZD/X1
Contents
Contents
Read this first! ............................................4
Chapter 1 Preparation
Precautions for use ................................................. 16
Cautions when transporting .................................. 16
Cautions when installing ....................................... 16
Security ................................................................ 18
Notes on using wireless connection ..................... 18
Application software supported by the projector .. 19
Storage ................................................................. 20
Disposal ................................................................ 20
Cautions on use ................................................... 20
Accessories .......................................................... 21
Optional accessories ............................................ 22
About your projector ............................................... 23
Remote control ..................................................... 23
Projector body ...................................................... 24
Preparing the remote control ................................. 27
Inserting and removing batteries .......................... 27
When using the system with multiple projectors .. 27
Attaching the lens cap ............................................ 28
Chapter 2 Getting Started
Setting up ................................................................. 30
Installation mode .................................................. 30
Parts for ceiling mount (optional) .......................... 31
Screen size and throw distance ........................... 31
Connecting ............................................................... 34
Before connecting ................................................ 34
Connecting example : AV equipment ................... 35
Connecting example : Computers ........................ 36
Chapter 3 Basic Operations
Powering on/off ....................................................... 38
Connecting the power cord .................................. 38
Power indicator ..................................................... 38
Powering on the projector .................................... 39
When the initial setting screen is displayed .......... 40
Making adjustments and selections ..................... 41
Powering off the projector .................................... 42
Direct Power Off function ..................................... 42
Projecting ................................................................. 43
Selecting the input signal ..................................... 43
How to adjust the state of the image .................... 44
Adjusting adjustable feet ...................................... 45
Basic operations by using the remote control ..... 46
Using the AV mute function .................................. 46
Using the mute function ........................................ 46
Controlling the volume of the speaker .................. 46
Using the freeze function ...................................... 46
Using the auto setup function ............................... 47
Using the screen adjustment function .................. 47
Using the digital zoom function ............................ 48
Using the presentation timer function ................... 48
Using the FUNCTION button ................................ 49
Using the Daylight View function .......................... 49
Setting the ID number of the remote control ........ 49
Chapter 4 Settings
Menu navigation ...................................................... 52
Navigating through the menu ............................... 52
Main menu ............................................................ 53
Sub-menu ............................................................. 54
[PICTURE] menu ...................................................... 56
[PICTURE MODE] ................................................ 56
[CONTRAST] ........................................................ 56
[BRIGHTNESS] .................................................... 56
[COLOR] ............................................................... 56
[TINT] ................................................................... 57
[SHARPNESS] ..................................................... 57
[COLOR TEMPERATURE] ................................... 57
[IRIS] .................................................................... 57
[ADVANCED MENU] ............................................ 58
[DAYLIGHT VIEW] ................................................ 58
[DIGITAL CINEMA REALITY] ............................... 59
[NOISE REDUCTION] .......................................... 59
[TV-SYSTEM] ....................................................... 59
[RGB/YPBPR] / [RGB/YCBCR] ................................ 59
[POSITION] menu .................................................... 61
[REALTIME KEYSTONE] ..................................... 61
[SCREEN ADJUSTMENT] ................................... 61
[SHIFT] ................................................................. 63
[DOT CLOCK]....................................................... 64
[CLOCK PHASE] .................................................. 64
[OVER SCAN] ...................................................... 65
[ASPECT] ............................................................. 65
[FRAME LOCK] .................................................... 66
[LANGUAGE] menu ................................................. 67
Changing the display language ........................... 67
[DISPLAY OPTION] menu ....................................... 68
[ON-SCREEN DISPLAY] ...................................... 68
[HDMI SIGNAL LEVEL] ........................................ 69
[CLOSED CAPTION SETTING] (Only for
NTSC, 480i YCBCR input) .................................. 69
[SCREEN SETTING] ........................................... 70
[STARTUP LOGO] ................................................ 70
[AUTO SETUP SETTING] .................................... 71
[SIGNAL SEARCH] .............................................. 71
[BACK COLOR] .................................................... 71
[WIDE MODE] ...................................................... 71
[SXGA MODE] ...................................................... 71
[P-TIMER] ............................................................. 72
2 - ENGLISH
Contents
[OTHER FUNCTIONS] ......................................... 73
[PROJECTOR SETUP] menu .................................. 74
[STATUS] ..............................................................74
[COMPUTER1 INPUT SETTING]......................... 74
[COMPUTER2 SELECT] ...................................... 74
[PROJECTOR ID] ................................................. 75
[INITIAL START UP] ............................................. 75
[PROJECTION METHOD] .................................... 75
[HIGH ALTITUDE MODE] ..................................... 75
[LAMP POWER] ................................................... 76
[ECO MANAGEMENT] ......................................... 76
[EMULATE] ........................................................... 78
[FUNCTION BUTTON] ......................................... 78
[AUDIO SETTING] ............................................... 78
[TEST PATTERN] ................................................. 80
[FILTER COUNTER]............................................. 80
[INITIALIZE ALL] .................................................. 81
[SECURITY] menu ................................................... 82
[PASSWORD] ....................................................... 82
[PASSWORD CHANGE] ...................................... 82
[TEXT DISPLAY] .................................................. 82
[TEXT CHANGE] .................................................. 83
[MENU LOCK] ...................................................... 83
[MENU LOCK PASSWORD] ................................ 83
[CONTROL DEVICE SETUP] ............................... 83
[NETWORK/USB] menu .......................................... 85
[WIRED LAN] ....................................................... 85
[NAME CHANGE] ................................................. 85
[NETWORK CONTROL] ...................................... 86
[AMX D.D.] ........................................................... 86
[Crestron Connected(TM)] .................................... 86
[MEMORY VIEWER LIGHT] ................................. 86
[STATUS] ..............................................................88
[INITIALIZE] .......................................................... 88
Chapter 6 Maintenance
Lamp and Warning Indicators .............................. 115
When an indicator lights up .................................115
Maintenance/replacement..................................... 116
Before performing maintenance/replacement .....116
Maintenance ........................................................116
Replacing the unit ................................................116
Troubleshooting .................................................... 120
Chapter 7 Appendix
Technical Information ........................................... 122
PJLink protocol ................................................... 122
Control commands via LAN ................................ 123
<SERIAL IN> terminal ........................................ 125
[MENU LOCK PASSWORD] operations ............ 127
List of compatible signals ................................... 128
Specications ........................................................ 130
Dimensions ............................................................ 133
Ceiling mount bracket safeguards....................... 134
Index ....................................................................... 135
Chapter 5 Operation of Function
Memory Viewer function ......................................... 90
Images that can be played back with the
Memory Viewer function .................................... 90
Cautions on using USB Memory .......................... 90
Displaying the Memory Viewer screen ................. 91
Playing the pictures .............................................. 91
Executing the slide ............................................... 91
Termination of the Memory Viewer ....................... 91
USB display function .............................................. 92
When using on a Windows computer ................... 92
When using Mac ................................................... 93
Network connection ................................................ 94
Connecting with wired LAN .................................. 94
Connecting with wireless LAN .............................. 95
About Presenter Light ............................................. 97
Web control function ............................................... 99
Computer that can be used .................................. 99
Accessing from the web browser ......................... 99
ENGLISH - 3
Read this rst!
Read this rst!
WARNING:
WARNING: To prevent damage which may result in re or shock hazard, do not expose this appliance to rain
The sound pressure level at the operator position is equal or less than 70 dB (A) according to ISO 7779.
WARNING:
1. Remove the plug from the mains socket when this unit is not in use for a prolonged period of time.
2. To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualied
service personnel.
3. Do not remove the earthing pin on the mains plug. This apparatus is equipped with a three prong earthing
type mains plug. This plug will only t an earthing-type mains socket. This is a safety feature. If you are unable to insert the plug into the mains socket, contact an electrician. Do not defeat the purpose of the earthing
plug.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT
WARNING:
THIS APPARATUS MUST BE EARTHED.
or moisture.
This device is not intended for use in the direct eld of view at visual display workplaces. To avoid
incommoding reexions at visual display workplaces this device must not be placed in the direct
eld of view.
The equipment is not intended for used at a video workstation in compliance BildscharbV.
TO RAIN OR MOISTURE.
RISK OF ELECTRIC SHOCK. DON’T OPEN.
Indicated on the projector
The lightning ash with arrowhead symbol, within an equilateral triangle, is intended to alert the
o
7
WARNING:
WARNING: Do not look at the light emitted from the lens while the projector is being used.
user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may
be of sufcient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the
product.
TURN THE POWER OFF AND DISCONNECT THE POWER PLUG FROM THE WALL OUTLET
BEFORE REPLACING THE LAMP UNIT.
Indicated on the projector
WARNING: Do not place objects in front of the lens while the projector is being used.
4 - ENGLISH
Read this rst!
CAUTION: To assure continued compliance, follow the attached installation instructions. This includes using
the provided power cord and shielded interface cables when connecting to computer or peripheral
devices. Also, any unauthorized changes or modications to this equipment could void the user's
authority to operate this device.
This is a device to project images onto a screen, etc., and is not intended for use as indoor lighting in a
domestic environment.
Directive 2009/125/EC
Importer's name and address within the European Union
Panasonic Marketing Europe GmbH
Panasonic Testing Centre
Winsbergring 15, 22525 Hamburg, Germany
CAUTION (North/Middle/South America)
This equipment is equipped with a three-pin grounding-type power plug. Do not
remove the grounding pin on the power plug. This plug will only t a grounding-type
power outlet. This is a safety feature. If you are unable to insert the plug into the
outlet, contact an electrician. Do not defeat the purpose of the grounding plug.
Do not remove
FCC NOTICE (USA)
Declaration of Conformity
Model Number: PT-VW360, PT-VX430
Trade Name: Panasonic
Responsible Party: Panasonic Corporation of North America
Address: Two Riverfront Plaza, Newark, NJ 07102-5490
General Contact: http://www.panasonic.com/support
Projector Contact: https://panasonic.net/cns/projector/
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
To assure continued compliance, follow the attached installation instructions and do not make any unauthorized
modications.
CAUTION:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the
following measures:
f Reorient or relocate the receiving antenna.
f Increase the separation between the equipment and receiver.
f Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
f Consult the dealer or an experienced radio/BD technician for help.
The user may nd the booklet “Something About Interference” available from FCC local regional ofces helpful.
FCC Warning:
To assure continued FCC emission limit compliance, follow the attached installation instructions. This includes
using the provided power cord and shielded interface cables when connecting to computer or peripheral
devices. Also, any unauthorized changes or modications to this equipment could void the user’s authority to
operate this device.
ENGLISH - 5
Read this rst!
WARNING (USA and Canada)
• Not for use in a computer room as dened in the Standard for the Protection of Electronic Computer/Data
Processing Equipment, ANSI/NFPA 75.
• For permanently connected equipment, a readily accessible disconnect device shall be incorporated in the
building installation wiring.
• For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily
accessible.
NOTIFICATION (Canada)
This class B digital apparatus complies with Canadian ICES-003.
Contains mercury / Contenu avec mercure
For more information on safe handling
procedures, the measures to be taken in
case of accidental breakage and safe
disposal options visit:
ec.gc.ca/mercure-mercury/.
Dispose of or recycle in accordance with
applicable laws.
Pour plus de renseignements sur les
procédures de manutention sécuritaire, les
mesures à prendre en cas de bris accidentel et
les options d’élimination sécuritaire visitez:
ec.gc.ca/mercure-mercury/.
Mettez au rebut ou recyclez conformément
aux lois applicables.
NOTIFICATION (USA)
• This product has a High Intensity Discharge (HID) lamp that contains mercury. Disposal may be regulated
in your community due to environmental considerations. For disposal or recycling information, please visit
Panasonic website: http://www.panasonic.com/environmental or call 1-888-769-0149.
6 - ENGLISH
Read this rst!
IMPORTANT: THE MOULDED PLUG
FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.
This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 13 amp fuse
is tted in this plug. Should the fuse need to be replaced, please ensure that the replacement fuse has a rating
of 13 amps and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark or the BSI mark on the body of the fuse.
If the plug contains a removable fuse cover, you must ensure that it is retted when the fuse is replaced. If you
lose the fuse cover, the plug must not be used until a replacement cover is obtained. A replacement fuse cover
can be purchased from an Authorised Service Center.
If the tted moulded plug is unsuitable for the mains socket in your home, then the fuse should be removed and
the plug cut off and disposed of safely. There is a danger of severe electrical shock if the cut off plug is inserted
into any 13 amp socket.
If a new plug is to be tted, please observe the wiring code as shown below.
If in any doubt, please consult a qualied electrician.
WARNING: THIS APPLIANCE MUST BE EARTHED.
IMPORTANT: The wires in this mains lead are coloured in accordance with the following code:
Green - and - Yellow: Earth
Blue: Neutral
Brown: Live
As the colours of the wire in the mains lead of this appliance may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows.
The wire which is coloured GREEN - AND - YELLOW must be connected to the terminal in the
plug which is marked with the letter E or by the Earth symbol or coloured GREEN or GREEN AND - YELLOW.
The wire which is coloured BLUE must be connected to the terminal in the plug which is marked
with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal in the plug which is marked
with the letter L or coloured RED.
How to replace the fuse: Open the fuse compartment with a screwdriver and replace the fuse.
ENGLISH - 7
Read this rst!
WARNING:
POWER
The wall outlet or the circuit breaker shall be installed near the equipment and shall be easily accessible when problems occur. If the following problems occur, cut off the power supply immediately.
Continued use of the projector in these conditions will result in re or electric shock.
z If foreign objects or water get inside the projector, cut off the power supply.
z If the projector is dropped or the cabinet is broken, cut off the power supply.
z If you notice smoke, strange smells or noise coming from the projector, cut off the power supply.
Please contact an Authorized Service Center for repairs, and do not attempt to repair the projector yourself.
During a thunderstorm, do not touch the projector or the cable.
Electric shocks can result.
Do not do anything that might damage the power cord or the power plug.
If the power cord is used while damaged, electric shocks, short-circuits or re will result.
zDo not damage the power cord, make any modications to it, place it near any hot objects, bend it
excessively, twist it, pull it, place heavy objects on top of it or wrap it into a bundle.
Ask an Authorized Service Center to carry out any repairs to the power cord that might be necessary.
Completely insert the power plug into the wall outlet and the power connector into the projector
terminal.
If the plug is not inserted correctly, electric shocks or overheating will result.
zDo not use plugs which are damaged or wall outlets which are coming loose from the wall.
Do not use anything other than the provided power cord.
Failure to observe this will result in re or electric shocks. Please note that if you do not use the provided power
cord to ground the device on the side of the outlet, this may result in electric shocks.
Clean the power plug regularly to prevent it from becoming covered in dust.
Failure to observe this will cause a re.
zIf dust builds up on the power plug, the resulting humidity can damage the insulation.
zIf not using the projector for an extended period of time, pull the power plug out from the wall outlet.
Pull the power plug out from the wall outlet and wipe it with a dry cloth regularly.
Do not handle the power plug and power connector with wet hands.
Failure to observe this will result in electric shocks.
Do not overload the wall outlet.
If the power supply is overloaded (ex., by using too many adapters), overheating may occur and re will result.
ON USE/INSTALLATION
Do not place the projector on soft materials such as carpets or sponge mats.
Doing so will cause the projector to overheat, which can cause burns, re or damage to the projector.
Do not set up the projector in humid or dusty places or in places where the projector may come into
contact with oily smoke or steam.
Using the projector under such conditions will result in re, electric shocks or deterioration of components. Oil
may also distort the plastic and the projector could fall such as when mounted on the ceiling.
Do not install this projector in a place which is not strong enough to take the full weight of the projector or on top of a surface which is sloped or unstable.
Failure to observe this will cause projector to fall down or tip over the projector, and severe injury or damage
could result.
Installation work (such as ceiling mount bracket) should only be carried out by a qualied technician.
If installation is not carried out and secured correctly, it can cause injury or accidents, such as electric shocks.
z Be sure to use the wire provided with the ceiling mount bracket as an extra safety measure to prevent the
projector from falling down. (Install in a different location to the ceiling mount bracket.)
Do not install the projector in a location where people pass through.
People may bump into the projector or trip on the power cord, which may result in re, electric shock, or injury.
Do not cover the air intake/exhaust ports.
Doing so will cause the projector to overheat, which can cause re or damage to the projector.
z Do not place the projector in narrow, badly ventilated places.
z Do not place the projector on cloth or papers, as these materials could be drawn into the air intake port.
z Provide at least 1 m (39-3/8") of space between any walls or objects and the exhaust port, and at least
50 cm (19-11/16") of space between any walls or objects and the intake port.
8 - ENGLISH
Read this rst!
WARNING:
Do not place your hands or other objects close to the air exhaust port.
Doing so will cause burns or damage your hands or other objects.
z Heated air comes out of the air exhaust port. Do not place your hands or face, or objects which cannot
withstand heat close to this port.
Do not look at or place your skin into the lights emitted from the lens while the projector is being used.
Doing so can cause burns or loss of sight.
z Strong light is emitted from the projector’s lens. Do not look at or place your hands directly into this light.
z Be especially careful not to let young children look into the lens. In addition, turn off the power and discon-
nect the power plug when you are away from the projector.
Never attempt to remodel or disassemble the projector.
High voltages can cause re or electric shocks.
z For any inspection, adjustment and repair work, please contact an Authorized Service Center.
Do not allow metal objects, ammable objects, or liquids to enter inside of the projector. Do not allow
the projector to get wet.
Doing so may cause short circuits or overheating, and result in re, electric shock, or malfunction of the projector.
z Do not place containers of liquid or metal objects near the projector.
z If liquid enters inside of the projector, consult your dealer.
z Particular attention must be paid to children.
Use the ceiling mount bracket specied by Panasonic.
Using the ceiling mount bracket other than the specied one will result in falling accidents.
z Attach the supplied safety cable to the ceiling mount bracket to prevent the projector from falling down.
ACCESSORIES
Do not use or handle the batteries improperly, and refer to the following.
Failure to observe this will cause burns, batteries to leak, overheat, explode or catch re.
z Do not use unspecied batteries.
z Do not charge dry cell batteries.
z Do not disassemble dry cell batteries.
z Do not heat the batteries or place them into water or re.
z Do not allow the + and - terminals of the batteries to come into contact with metallic objects such as neck-
laces or hairpins.
z Do not store or carry batteries together with metallic objects.
z Store the batteries in a plastic bag and keep them away from metallic objects.
z Make sure the polarities (+ and -) are correct when inserting the batteries.
z Do not use a new battery together with an old battery or mix different types of batteries.
z Do not use batteries with the outer cover peeling away or removed.
Do not allow children to reach the batteries.
Accidentally swallowing them can cause physical harm.
z If swallowed, seek medical advice immediately.
If the battery uid leaks, do not touch it with bare hands, and take the following measures if necessary.
z Battery uid on your skin or clothing could result in skin inammation or injury.
Rinse with clean water and seek medical advice immediately.
z Battery uid coming in contact with your eyes could result in loss of sight.
In this case, do not rub your eyes. Rinse with clean water and seek medical advice immediately.
Do not remove unspecied screws during the lamp unit replacement.
Doing so can cause electric shocks, burns, or injury.
Do not disassemble the lamp unit.
If the lamp breaks, it could cause injury.
Lamp replacement
The lamp has high internal pressure. If improperly handled, an explosion and severe injury or accidents will
result.
z The lamp can easily explode if struck against hard objects or dropped.
z Before replacing the lamp unit, be sure to turn the power off and to disconnect the power plug from the wall
outlet.
Electric shocks or explosions can result if this is not done.
z When replacing the lamp unit, turn the power off and allow the lamp to cool for at least one hour before
handling it otherwise it can cause burns.
Remove the depleted batteries from the remote control promptly.
z Leaving them in the unit may result in uid leakage, overheating, or explosion of the batteries.
ENGLISH - 9
Read this rst!
CAUTION:
POWER
When disconnecting the power cord, be sure to hold the power plug and power connector.
If the power cord itself is pulled, the lead will become damaged, and re, short-circuits or serious electric
shocks will result.
When not using the projector for an extended period of time, disconnect the power plug from the wall
outlet.
Failure to do so may result in re or electric shock.
Disconnect the power plug from the wall outlet before carrying out any cleaning and replacing the unit.
Failure to do so may result in electric shock.
ON USE/INSTALLATION
Do not place heavy objects on top of the projector.
Failure to observe this will cause the projector to become unbalanced and fall, which could result in damage or
injury. The projector will be damaged or deformed.
Do not put your weight on this projector.
You could fall or the projector could break, and injury will result.
z Be especially careful not to let young children stand or sit on the projector.
Do not place the projector in extremely hot locations.
Doing so will cause the outer casing or internal components to deteriorate, or result in re.
z Take particular care in locations exposed to direct sunlight or near heaters.
Do not install the projector in a location where salt pollution or corrosive gas may occur.
Doing so may result in falling due to corrosion. Also, it may result in malfunctions.
Do not place objects in front of the lens while the projector is being used.
Do not block the projection by placing an object in front of the projection lens.
Doing so can cause re, damage to an object, or malfunction of the projector.
z Strong light is emitted from the projector’s lens.
Do not stand in front of the lens while the projector is being used.
Doing so can cause damage and burns to clothing.
z Strong light is emitted from the projector’s lens.
Always disconnect all cables before moving the projector.
Moving the projector with cables still attached can damage the cables, which will cause re or electric shocks to
occur.
When mounting the projector on the ceiling, keep mounting screws and power cord from contact with
metal parts inside the ceiling.
Contact with metal parts inside the ceiling can cause electric shocks.
Never plug headphones and earphones into <VARIABLE AUDIO OUT> terminal.
Excessive sound pressure from earphones and headphones can cause hearing loss.
Do not project an image with the lens cap attached.
Doing so can cause re.
ACCESSORIES
Do not use the old lamp unit.
If used it could cause lamp explosion.
If the lamp has broken, ventilate the room immediately. Do not touch or bring your face close to the
broken pieces.
Failure to observe this will cause the user to absorb the gas which was released when the lamp broke and which
contains nearly the same amount of mercury as uorescent lamp, and the broken pieces will cause injury.
z If you believe that you have absorbed the gas or that the gas has got into your eyes or mouth, seek medical
advice immediately.
z Ask your dealer about replacing the lamp unit and check the inside of the projector.
10 - ENGLISH
Read this rst!
CAUTION:
When not using the projector for an extended period of time, remove the batteries from the remote
control.
Failure to observe this will cause the batteries to leak, overheat, catch re or explode, which may result in re or
contamination of surrounding area.
Do not open the desiccant bag, or do not eat the contents.
If swallowed the contents of the desiccant bag accidentally, it may cause bad result to your body.
z If the desiccant gets into your eyes or mouth, immediately rinse with clean water and seek medical advice.
z Be especially careful not to let children reach the desiccant.
MAINTENANCE
Ask your dealer about cleaning inside the projector once a year.
Continuous use while dust is accumulated inside the projector may result in re.
z For cleaning fee, ask your dealer.
ENGLISH - 11
Read this rst!
(i)
(ii)
(i)
(ii)
To remove the battery
1. Press the guide and lift the cover. 2. Remove the batteries.
(ii)
(i)
Brazil Only
Brasil Apenas
Manuseio de baterias usadas
BRASIL
Após o uso, as pilhas e /ou baterias deverão
ser entregues ao estabelecimento comercial
ou rede de assistência técnica autorizada.
Cobrir os terminais positivo (+) e negativo (-) com uma ta isolante adesiva, antes de depositar numa caixa
destinada para o recolhimento. O contato entre partes metálicas pode causar vazamentos,
gerar calor, romper a blindagem e produzir fogo. (Fig. 1)
Fig. 1
Como isolar os terminais
Não desmonte, não remova o invólucro, nem amasse a bateria. O gás liberado pela bateria pode irritar a
garganta, danicar o lacre do invólucro ou o vazamento provocar calor, ruptura da blindagem e produzir fogo
devido ao curto circuito dos terminais. Não incinere nem aqueça as baterias, elas não podem car expostas a
temperaturas superiores a 100 °C (212 °F). O gás liberado pela bateria pode irritar a garganta, danicar o lacre
do invólucro ou o vazamento provocar calor, ruptura da blindagem e produzir fogo devido ao curto circuito dos
terminais provocado internamente.
Evite o contato com o liquido que vazar das baterias. Caso isto ocorra, lave bem a parte afetada com bastante
água. Caso haja irritação, consulte um médico.
Fita Isolante
Fita Isolante
Remoção das baterias
1. Pressione a guia e levante a tampa. 2. Remova as baterias.
(ii)
(i)
12 - ENGLISH
rTrademarks, etc.
f Windows, Internet Explorer and Microsoft Edge are registered trademarks or trademarks of Microsoft
Corporation in the United States and other countries.
f Mac, OS X, macOS, iPad, iPhone, iPod touch and Safari are trademarks of Apple Inc., registered in the United
States and other countries.
f The terms HDMI and HDMI High-Denition Multimedia Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
f PJLink™ is a registered trademark or pending trademark in Japan, the United States, and other countries and
regions.
f RoomView and Crestron RoomView are registered trademarks of Crestron Electronics, Inc.
Crestron ConnectedTM and Fusion RV are trademarks of Crestron Electronics, Inc.
f IOS is a trademark and registered trademark of Cisco in the United States and other countries and is used
under license.
f Android is a trademark of Google Inc.
f Adobe, Adobe Flash Player and Adobe Reader are trademarks or registered trademarks of Adobe Systems Inc.
in the United States and/or other countries.
f Some of the fonts used in the on-screen menu are Ricoh bitmap fonts, which are manufactured and sold by
Ricoh Company, Ltd.
f Other names, company names or product names used in these operating instructions are the trademarks or
registered trademarks of their respective holders.
Please note that the operating instructions do not include the ® and ™ symbols.
rSoftware information regarding this product
This product incorporates the following software.
(1) the software developed independently by or for Panasonic Corporation,
(2) the software owned by third party and licensed to Panasonic Corporation,
(3) the software licensed under the GNU General Public License, Version 2.0 (GPL V2.0),
(4) the software licensed under the GNU LESSER General Public License, Version 2.1 (LGPL V2.1), and/or
(5) open source software other than the software licensed under the GPL V2.0 and/or LGPL V2.1.
The software categorized as (3) - (5) are distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY, without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
PURPOSE. Please refer to the detailed terms and conditions thereof shown in the attached CD-ROM.
At least three (3) years from delivery of this product, Panasonic will give to any third party who contacts us at
the contact information provided below, for a charge no more than our cost of physically performing source code
distribution, a complete machine-readable copy of the corresponding source code covered under GPL V2.0,
LGPL V2.1 or the other licenses with the obligation to do so, as well as the respective copyright notice thereof.
Contact Information: oss-cd-request@gg.jp.panasonic.com
rIllustrations in these operating instructions
f Illustrations of the projector, screen, and other parts may vary from the actual product.
f Illustrations displayed on the computer screen may differ depending on the computer type and its operating
system.
f Illustrations of the projector with the power cord attached are only examples. The shape of the supplied power
cords varies depending on the country where you purchased the product.
rPage references
f Reference pages in this manual are indicated as: (Æ page 00).
rTerm
f In this manual, the “Wireless remote control unit” accessory is referred to as the “Remote control”.
ENGLISH - 13
Features of the Projector
Comfortable viewing in a bright
environment
▶ The high contrast ratio 20 000 : 1 is
achieved in a compact body.
▶ The low noise level 29 dB*1 supports
comfortable viewing during quiet scenes.
▶ Even if projected under a bright light,
the images can be corrected to optimum
vividness by using the <DAYLIGHT VIEW>
button on the remote control.
*1 When [LAMP POWER] is set to [ECO]
Abundant image correction function
Quick Steps
For details, see the corresponding pages.
1. Set up your projector.
(x page 30)
2. Connect with other devices.
(Æ page 34)
3. Connect the power cord.
(x page 38)
▶ Keystone correction, corner correction and
curved correction functions allow you to
correct the image to t the screen.
Useful function for presentations
▶ The Memory Viewer function enables you
to project still images stored in the USB
memory without using a computer.
4. Power on.
(x page 39)
5. Make initial settings.
(x page 40)
fTake this step when you power on for the rst time after
purchasing the projector.
6. Select the input signal.
(x page 43)
14 - ENGLISH
7. Adjust the image.
(x page 44)
Chapter 1 Preparation
This chapter describes things you need to know or check before using the projector.
ENGLISH - 15
Chapter 1 Preparation - Precautions for use
Precautions for use
Cautions when transporting
f When transporting the projector, hold it securely by its bottom and avoid excessive vibration and impacts. They
may damage the internal parts and result in malfunctions.
f Do not transport the projector with the adjustable feet extended. Doing so may damage the adjustable feet.
f Do not move or transport the projector with the wireless module (Model No.: ET-WML100) of the optional
accessories attached. Doing so may damage the wireless module.
Cautions when installing
rDo not set up the projector outdoors.
The projector is designed for indoor use only.
rDo not set up the projector in the following locations.
f Places where vibration and impacts occur such as in a car or vehicle: Doing so may damage the internal parts
and result in malfunctions.
f Location close to sea or where corrosive gas may occur: The projector may fall due to corrosion. Also, failure to
do so may shorten the life of the components and result in malfunction.
f Near the exhaust of an air conditioner: Depending on the conditions of use, the screen may uctuate in rare
cases due to the heated air from the air exhaust port or the hot or cooled air from the air conditioner. Make sure
that the exhaust from the projector or other equipment, or the air from the air conditioner does not blow toward
the front of the projector.
f Places with sharp temperature uctuations such as near lights (studio lamp): Doing so may shorten the life of
the luminous lamp, or result in deformation of the outer case due to heat, which may cause malfunctions.
Follow the operating environment temperature of the projector.
f Near high-voltage power lines or near motors: Doing so may interfere with the operation of the projector.
rAsk a qualied technician or your dealer for the installation work such as installing to
a ceiling, etc.
To ensure projector performance and safety, ask a qualied technician or your dealer when installing to a ceiling
or in a high place.
rFocus adjustment
The projection lens is thermally affected by the light from the light source, making the focus unstable in the period
just after switching on the power. It is recommended that the images be projected continuously for at least 30
minutes before the focus is adjusted.
rWhen using the projector in the elevation of below 1 400 m (4 593'), make sure [HIGH
ALTITUDE MODE] is set to [OFF].
Failure to do so may shorten the life of the internal parts and result in malfunctions.
rWhen using the projector in the elevation of above 1 400 m (4 593') and below 2 000 m
(6 562'), make sure [HIGH ALTITUDE MODE] is set to [HIGH1].
Failure to do so may shorten the life of the internal parts and result in malfunctions.
rWhen using the projector in the elevation of above 2 000 m (6 562') and below 2 700 m
(8 858'), make sure [HIGH ALTITUDE MODE] is set to [HIGH2].
Failure to do so may shorten the life of the internal parts and result in malfunctions.
rDo not install the projector at elevations of 2 700 m (8 858') or higher above sea level.
Failure to do so may shorten the life of the internal parts and result in malfunctions.
r Do not tilt the projector or place it on its side.
Do not tilt the projector body more than approximately ±40° vertically or ±15° horizontally. Over tilting may result in
shortening the life of the components.
16 - ENGLISH
Chapter 1 Preparation - Precautions for use
The angle that can be corrected through [POSITION] menu → [SCREEN ADJUSTMENT] → [KEYSTONE] is
within ±35°. If the vertical tilt of the projector with respect to the screen surface exceeds 35°, vertical trapezoidal
distortion may not be fully corrected.
Within 40°
Within 40°
Within 15°
Within 15°
rCautions when setting the projectors
f Use the adjustable feet only for the oor standing installation and for adjusting the angle. Using them for other
purposes may damage the projector.
f If you want to install the projector with a method other than desk/oor setup using the adjustable feet or ceiling
mount with the ceiling mount accessories, use the three screw holes for ceiling mounting (as shown below) to x
the projector.
(Screw: M4; Depth of the screw hole: 8 mm (5/16"); Torque: M4 1.25 ± 0.2 N·m)
In addition, always keep a gap of more than 20 mm (25/32") between the bottom of the projector and installation
surface.
Make sure that there is no clearance between the screw holes for ceiling mount on the projector bottom and the
installation surface by inserting spacers (metallic) of at least 20 mm (25/32″) between them.
Installation surface
Adjustable feet
Air intake port
(bottom)
Over 20 mm
(25/32″)
fMake sure the air ow into the air intake
port (bottom), failure to do so may cause the
projector cannot work.
The positions of adjustable feet and the
screw holes for ceiling mounting
Screw holes for
ceiling mounting
(M4)
f Do not stack the projectors.
f Do not use the projector supporting it by the top.
f Do not block the ventilation ports (intake and exhaust) of the projector.
f Avoid heating and cooling air from the air conditioning system directly blow to the ventilation ports (intake and
exhaust) of the projector.
Over 500 mm
(19-11/16")
Over 1 000 mm
(39-3/8")
Over 7 mm
(9/32")
Over 500 mm
(19-11/16")
Over 200 mm
(7-7/8")
ENGLISH - 17
Chapter 1 Preparation - Precautions for use
f Do not install the projector in a conned space.
When placing the projector in a conned space, a ventilation and/or air conditioning system is required. Exhaust
heat may accumulate when the ventilation is not enough, triggering the protection circuit of the projector.
f Panasonic takes no responsibility for any damage to the product caused by an inappropriate choice of location
for installing the projector, even if the warranty period of the product has not expired.
Security
When using this product, take safety measures against following incidents.
f Personal information being leaked via this product.
f Unauthorized operation of this product by a malicious third party.
f Interfering or stopping of this product by a malicious third party.
Take sufcient security measures.
f Make your password as difcult to guess as possible.
f Change your password periodically. The password can be set in [SECURITY] menu → [PASSWORD
CHANGE].
f Panasonic Corporation or its afliate companies will never ask for your password directly. Do not divulge your
password in case you receive such inquiries.
f The connecting network must be secured by rewall or others.
f Set a password for the web control and restrict the users who can log in. The web control password can be set
on the [Change password] page of the web control screen.
rSecurity cautions for using the wireless LAN product
The advantage of a wireless LAN is that information can be exchanged between a PC or other such equipment
and an access point using radio waves as long as you are within range for radio transmissions.
On the other hand, because the radio waves can travel through obstacles (such as walls) and are available
everywhere within a given range, problems of the type listed below may occur if security-related settings are not
made sufciently.
f Communication content leak
The following communication information may be leaked by a malicious third party who intentionally intercept
the transmitted data.
g Personal information such as your ID, password, and/or credit card numbers
g The e-mail content
f Unauthorized access
A malicious third party may access your personal or corporate network without authorization and engage in the
following types of behavior.
g Retrieve personal and/or secret information (information leak)
g Spread false information by impersonating a particular person (spoong)
g Overwrite intercepted communications and issue false data (tampering)
g Spread harmful software such as a computer virus and crash your data and/or system (system crash)
Since most wireless LAN adapters or access points are equipped with security features to take care of these
problems, you can reduce the possibility of these problems occurring when using this product by making the
appropriate security settings for the wireless LAN device.
Some wireless LAN devices may not be set for security immediately after purchase. To decrease the possibility of
occurrence of security problems, before using any wireless LAN devices, be absolutely sure to make all securityrelated settings according to the instructions given in the operation manuals supplied with them.
Depending on the specications of the wireless LAN, a malicious third party may be able to break security settings
by special means.
Panasonic advises customers to thoroughly understand the risk of using this product without making security
settings, and recommends that the customers make security settings at their own discretion and responsibility.
Notes on using wireless connection
Wireless connection function of the projector uses radio waves in the 2.4 GHz band.
A radio station license is not required, but be sure to read and fully understand the following items before use.
The wireless module (Model No.: ET-WML100) of optional accessories must be installed when you want to use
the wireless LAN function of the projector.
18 - ENGLISH
Chapter 1 Preparation - Precautions for use
rDo not use near other wireless equipment.
The following equipment may use radio waves in the same band as the projector.
When the projector is used near these devices, radio wave interference may make communication impossible, or
the communication speed may become slower.
f Microwave ovens, etc.
f Industrial, chemical and medical equipment, etc.
f In-plant radio stations for identifying moving objects such as those used in factory manufacturing lines, etc.
f Designated low-power radio stations
r If at all possible, avoid the use of cellular phones, TV sets or radios near the projector.
Cellular phones, TV sets, radios and similar devices use different radio bands from the projector, so there is no
effect on wireless communication or the transmission and reception of these devices. However, radio waves from
the projector may produce audio or video noise.
r Wireless communication radio waves cannot penetrate steel reinforcements, metal,
concrete, etc.
Communication is possible through walls and oors made from materials such as wood and glass (except glass
containing wire mesh), but not through walls and oors made from steel reinforcements, metal, concrete, etc.
r Avoid using the projector in locations prone to static electricity.
If the projector is used in a location prone to static electricity, the wireless LAN or wired LAN connection may be
lost.
If the static electricity or noise make it impossible to establish a connection with the LAN, disconnect the power
plug from the outlet after turning off the projector power, eliminate the source of static electricity or noise, then turn
on the projector.
rUsing the projector outside the country
Note that depending on countries or regions, there are restrictions on the channels and frequencies at which you
can use the wireless LAN.
Application software supported by the projector
The projector supports following application software. For details or downloading each application software, visit
the Panasonic website (https://panasonic.net/cns/projector/).
f Logo Transfer Software
This application software transfers the original image, such as company logo, which is projected at the start, to
the projector.
f Multi Monitoring & Control Software
This application software monitors and controls the multiple display devices (projector and at panel display)
connected to an intranet.
f Early Warning Software
This plug-in software monitors the status of the display devices and their peripherals within an intranet, and
noties of abnormality of such equipment and detects the signs of possible abnormality. “Early Warning
Software” is preinstalled in the “Multi Monitoring & Control Software”. To use the early warning function of
this plug-in software, install “Multi Monitoring & Control Software” in the PC to be used. By enabling the early
warning function, it will notify of the approximate time to replace the consumables for the display devices,
to clean each part of the display devices, and to replace the components of the display devices, allowing to
execute maintenance in advance.
The early warning function can be used by registering maximum of 2048 display devices free of charge for
90 days after installing the “Multi Monitoring & Control Software” into a PC. To continuously use after the 90
days, it is necessary to purchase the license of “Early Warning Software” (ET-SWA100 Series) and perform
the activation. Also, depending on the type of license, the number of display devices that can be registered for
monitoring varies. For details, refer to the Operating Instructions of “Multi Monitoring & Control Software”.
f Presenter Light Software
This application software compatible with Windows computers transmits the computer screen to the projector
via wireless LAN or wired LAN.
f Wireless Projector
This application software for iOS/Android is used to project les such as PDF or image by transmitting to the
projector via wireless LAN.
ENGLISH - 19
Chapter 1 Preparation - Precautions for use
Storage
When storing the projector, keep it in a dry room.
Disposal
To dispose of the product, ask your local authorities or dealer for correct methods of disposal.
The luminous lamp contains mercury. When disposing of used lamp units, contact your local authorities or dealer
for correct methods of disposal.
Cautions on use
rTo get a good picture quality
In order to view a beautiful image in higher contrast, prepare an appropriate environment. Draw curtains or blinds
over windows and turn off any lights near the screen to prevent outside light or light from indoor lamp from shining
onto the screen.
rDo not touch the surface of the projector lens with your bare hands.
If the surface of the projection lens becomes dirty from ngerprints or anything else, this will be magnied and
projected onto the screen.
It is recommended to attach the supplied lens cap to the projection lens when you do not use the projector.
rLCD panel
The LCD panel is precision-made. Note that in rare cases, pixels of high precision could be missing or always
lit. Note that such phenomena do not indicate malfunction. If still images are projected for a long time, a residual
image may remain on the LCD panel. Note that the residual image may not disappear.
rOptical parts
When the operating environment temperature is high or in environments where lots of dust, cigarette smoke, etc.
is present, the replacement cycle of the LCD panel, polarizing plate and other optical parts may be shorter even if
used for less than one year. Consult your dealer for details.
rLuminous lamp
The light source of the projector is a mercury lamp with high internal pressure.
A high-pressure mercury lamp has the following characteristics.
f The luminance of the luminous lamp will decrease by duration of usage.
f The luminous lamp may burst with a loud sound or have its service life shortened because of shock, chipping, or
degradation due to cumulative runtime.
f The life of the luminous lamp varies greatly depending on individual specicities and usage conditions. In
particular, continuous use over 12 hours and frequent switching off/on of the power greatly deteriorate the
luminous lamp and affect the luminous lamp life.
f In rare cases, the luminous lamp burst shortly after the projection.
f The risk of bursting increases when the luminous lamp is used beyond its replacement cycle. Make sure to
replace the lamp unit consistently. (“When to replace the lamp unit” (x page 118), "Replacing the lamp unit"
(x page 118))
f If the luminous lamp bursts, gas contained inside of the luminous lamp is released in a form of smoke.
f It is recommended to store replacement lamp for contingency.
rComputer and external device connections
When connecting a computer or an external device, read this manual carefully regarding the use of power cords
and shielded cables as well.
20 - ENGLISH
Chapter 1 Preparation - Precautions for use
Accessories
Make sure the following accessories are provided with your projector. Numbers enclosed < > show the number of
accessories.
Wireless remote control unit <1>
(N2QAYA000154)
Power cord
(TXFSX02UXRZ)
(TXFSX02UYAZ)
CD-ROM <1>
(Operating Instructions are included.)
AAA/R03 or AAA/LR03 battery <2>
(for remote control unit)
String <1>
(6103504711)
Lens cap <1>
(TXFSX02UFEZ)
(TKKL5568-1)
RGB signal cable <1>
(K1HY15YY0012)
Attention
f After unpacking the projector, discard the power cord cap and packaging material properly.
f Do not use the supplied power cord for devices other than this projector.
f For lost accessories, consult your dealer.
f Store small parts in an appropriate manner, and keep them away from young children.
Note
(For lens cap)
f The type and number of the power cord depend on the country in which you purchased the product.
f The model numbers of accessories are subject to change without prior notice.
ENGLISH - 21
Chapter 1 Preparation - Precautions for use
Optional accessories
Options Model No.
ET-PKL100H (for high ceilings)
Ceiling Mount Bracket
Replacement Lamp Unit ET-LAV300
Replacement Filter Unit ET-RFV300
D-SUB - S Video conversion cable
Wireless Module ET-WML100
Early Warning Software
(Basic license/3-year license)
*1 This product cannot be purchased in some countries. For details, contact your dealer.
*2 The sufx of the Model No. differs according to the license type.
Note
f The model numbers of optional accessories are subject to change without prior notice.
ET-PKL100S (for low ceilings)
ET-PKV400B (Projector Mount Bracket)
ET-ADSV
*1
ET-SWA100 series
*2
22 - ENGLISH
Chapter 1 Preparation - About your projector
About your projector
Remote control
6
1
2
3
4
5
1 Power <v/b> button (v Standby / b Power on)
Sets the projector to the state where the projector is switched
off (standby mode). Also starts projection when the power is
switched off (standby mode).
2 Input selection buttons (<COMPUTER 1> / <COMPUTER 2>/
<HDMI 1/2> / <VIDEO> / <MEMORY VIEWER/USB DISPLAY/
NETWORK>)
Switches the input signal to project. (Æ page 43)
3 <MENU> button / <RETURN> button / asqw buttons /
<ENTER> button
Used to navigate through the menu screen. (x page 52)
The asqw buttons are also used to enter password or
characters for [SECURITY].
4 <FREEZE> button
Pauses the projected image and mute the audio temporarily.
(x page 46)
5 Number (<1> - <6>) buttons
Used for entering the ID number in a multiple projector
environment or a password.
6 Remote control signal transmitter
7 <AUTO SETUP> button
Used to perform automatic adjustment while projecting the
image (Æ page 47).
8 <MUTE> button
Used to mute the audio. (Æ page 46)
9 <AV MUTE> button
Used to turn off the audio and video temporarily. (Æ page 46)
7
8
9
10
11
12
13
14
10 <DAYLIGHT VIEW> button
Used to correct the image when the projector is used in a bright
surroundings. (Æ pages 49, 58)
11 <DEFAULT> button
Resets the content of the sub-menu to the factory default.
(Æ page 53)
12 <ID SET> button
Sets the projector ID on the remote control for a system using
multiple projectors. (x page 27)
13 <D.ZOOM+> button / <D.ZOOM-> button
Zooms in and out the images. (Æ page 48)
14 <VOL+> button / <VOL-> button
Adjusts the volume level of the built-in speaker or the audio
output. (Æ page 46)
15 <FUNCTION> button
Specifys a shortcut button for a frequently used operation.
(Æ page 49)
16 <ID ALL> button
Used to simultaneously control all the projectors with one
remote control when using multiple projectors. (x page 27)
17 <P-TIMER> button
Operate the P-TIMER function. (Æ page 48)
18 <SCREEN ADJ> button
Corrects the distortion of the projected image. (Æ page 47)
15
16
17
18
Attention
f Do not drop the remote control.
f Avoid contact with liquids.
f Do not attempt to modify or disassemble the remote control.
f Please observe the following contents that are described on
the back of the remote control unit (see the right picture).
g Do not use a new battery together with an old battery.
g Do not use unspecied batteries.
g Make sure the polarities (+ and -) are correct when inserting the batteries.
In addition, please read the contents that are related to batteries in the “Read this rst!”.
1.Do not use old battery with new one.
2.Do not use batteries other than the
type specified.
3.Be sure the batteries are inserted properly.
Caution label at the back of the remote control
ENGLISH - 23
Chapter 1 Preparation - About your projector
Note
f The remote control can be used within a distance of about 7 m (22'11-5/8") if pointed directly at the remote control signal receiver. The
remote control can control at angles of up to ± 30 ° vertically and ± 30 ° horizontally, but the effective control range may be reduced.
f If there are any obstacles between the remote control and the remote control signal receiver, the remote control may not operate correctly.
f You can operate the projector by reecting the remote control signal on the screen. The operating range may differ due to the loss of light
caused by the properties of the screen.
f When the remote control signal receiver is lit with a uorescent light or other strong light source, the projector may become inoperative. Set
the projector as far from the luminous source as possible.
Projector body
1
5
4
2 3
6 7 8 9 10 11
WARNING
Keep your hands and other objects away from the air exhaust port.
f Keep your hand and face away.
f Do not insert your nger.
f Keep heat-sensitive articles away.
Heated air from the air exhaust port can cause burns or external damage.
12
13
14
1 Zoom ring (Back)
Adjust the zoom.
2 Control panel and indicators (x page 25)
3 Lamp cover (x page 118)
The lamp unit is located inside.
4 Projection Lens
5 Focus ring (Front)
Adjust the focus.
6 Remote control signal receiver
7 Air exhaust port
8 Speaker
9 <AC IN> terminal
Connect the supplied power cord.
10 Connecting terminals (x page 26)
11 Air intake port (Side) / Air lter cover (x page 116)
The air lter unit is inside.
12 Adjustable feet
Adjust the projection angle.
13 Air intake port (Bottom)
14 Security Chain Hook
Attaches a burglar prevention cable, etc.
Attention
f Do not block the ventilation ports (intake and exhaust) of the projector.
f If you turn the power off with the direct power off function with the projector installed upside-down, or if you turn the projector upside-down
after turning off the power using the direct power off function, do not put your hands or objects close to the air inlet (bottom) due to the back
ow of heated air from the air inlet(bottom). It may cause burns, injuries or deformation.
24 - ENGLISH
AUTO SETUP
Chapter 1 Preparation - About your projector
rControl panel and indicators
1
2
3
4
5
1 Power <v/b> button (v standby / b power on)
Sets the projector to the state where the projector is switched
off (standby mode). Also starts projection when the power is
switched off (standby mode).
2 Power indicator <ON(G)/STANDBY(R)>
Displays the status of the power.
3 Lamp indicator <LAMP>
Displays the status of the luminous lamp.
4 Warning indicator <WARNING>
Indicates the abnormal conditions of the projector.
5 Ambient Luminance sensor
6 <MENU> button
Displays or hides the main menu. (x page 52)
When the sub menu is displayed, pressing it will return to the
previous screen.
9
10
7
6
8
7 <ENTER> button
Determines and executes an item in the menu screen.
8 asqw buttons
Selects an item in the menu screen, changes the setting, and
adjusts the level.
Also used to enter a password in the [SECURITY] menu or enter
characters.
9 <INPUT SELECT> button
Selects the input signal for projection. (x page 43)
10 <AUTO SETUP> button
Automatically adjusts the screen display position when projecting
the image. (x page 47)
ENGLISH - 25
rConnecting terminals
1 2 3 4 5 6
Chapter 1 Preparation - About your projector
7 8 9 10 11
1 <LAN> terminal
This is the LAN terminal to connect to the network.
2 <USB A (VIEWER/WIRELESS)> terminal
When using the Memory Viewer function, attach the USB
memory directly to this terminal. (x page 90)
Please attach the wireless module (Model No.: ET-WML100)
directly to this terminal when using the wireless LAN function.
(x page 95)
3 <USB B (DISPLAY)> terminal
This terminal is used to connect the projector to the computer
with a USB cable when you want to use the USB display
function.
4 <COMPUTER 1 IN> terminal
This is the terminal to input RGB signals, YCBCR/YPBPR signals,
or Y/C signals.
5 <COMPUTER 2 IN/1 OUT> terminal
This is the terminal to input RGB signals or YCBCR/YPBPR
signals. It can also output the signals input from <COMPUTER 1
IN> terminal to an external device.
6 <HDMI 1 IN> terminal / <HDMI 2 IN> terminal
These are the terminals to input HDMI signal.
7 <SERIAL IN> terminal
This is the RS-232C compatible terminal to externally control the
projector by connecting a computer.
8 <VIDEO IN> terminal
This is the terminal to input video signals.
9 <AUDIO IN 3 (L/R)> terminal
This is the terminal to input audio signals.
Left input (L) and right input (R) are provided for the <AUDIO IN
3> terminal.
10 <AUDIO IN 1> terminal / <AUDIO IN 2> terminal
These are the terminals to input audio signals.
11 <VARIABLE AUDIO OUT> terminal
This is the terminal to output the input audio signal to the
projector.
Attention
f When a LAN cable is directly connected to the projector, the network connection must be made indoors.
26 - ENGLISH
(i)
(ii)
Chapter 1 Preparation - Preparing the remote control
Preparing the remote control
Inserting and removing batteries
(ii)
(i)
Fig.1
1) Open the cover. (Fig. 1)
2) Insert batteries and close the cover. (Insert the "m" side first.) (Fig. 2)
f When removing the batteries, perform the steps in reverse order.
Fig.2
When using the system with multiple projectors
When you use the system with multiple projectors, you can operate all the projectors simultaneously or each
projector individually by using single remote control, if a unique ID number is assigned to each projector.
When you want to set the ID number, at rst you need to complete the Initial setting, and then after setting the ID
number of the projector, set the ID number on the remote control. About Initial setting, please refer to “When the
initial setting screen is displayed” (x page 40).
The factory default ID number of the unit (the projector and the remote control) is set to [ALL], you can control with
this setting. If necessary, please set the ID number to the remote control and the projector. About how to set the ID
number of the remote control, please refer to “Setting the ID number of the remote control” (x page 49).
Note
f Set the ID number of the projector from the [PROJECTOR SETUP] menu → [PROJECTOR ID] (x page 75).
ENGLISH - 27
Chapter 1 Preparation - Attaching the lens cap
Attaching the lens cap
When moving this projector or while not using it over an extended period of time, it is recommended to attach the
lens cap to avoid contaminating the lens.
To prevent loss of the lens cap, please attach the lens cap with the string of accessories according to the following
procedures.
1) Thread the thinner end of the string through the hole on the lens cap.
Lens cap
String
2) Thread the other side (the side with larger ring) of the string through the hole at the bottom of the
projector and fasten it.
(ii)
(i)
28 - ENGLISH
Chapter 2 Getting Started
This chapter describes things you need to do before using the projector such as the setup and
connections.
ENGLISH - 29
Chapter 2 Getting Started - Setting up
Setting up
Installation mode
There are four ways to set up the projector. Set the [PROJECTOR SETUP] menu → [PROJECTION METHOD]
(x page 75) depending on the installation location.
Setting on a desk/oor and projecting forward Setting on a desk/oor and projecting from rear
(Using the translucent screen)
Menu item Method Menu item Method
[PROJECTION METHOD] [AUTO] or [FRONT/DESK] [PROJECTION METHOD] [REAR/DESK]
Mounting on the ceiling and projecting forward Mounting on the ceiling and projecting from rear
(Using the translucent screen)
Menu item Method Menu item Method
[PROJECTION METHOD] [AUTO] or [FRONT/CEILING] [PROJECTION METHOD] [REAR/CEILING]
Note
f The projector has a built-in angle sensor. The attitude of the projector is automatically detected by setting the [PROJECTOR SETUP] menu
→ [PROJECTION METHOD] to [AUTO]. For rear projection, set the [PROJECTION METHOD] to [REAR/DESK] or [REAR/CEILING].
rAngle sensor
The range of installation posture detected by the projector’s built-in angle sensor is as follows.
In case of [AUTO], when the projector is placed with the top side upward within ±40° from the horizontal plane, it
will switch to [FRONT/DESK] automatically; when the projector is placed with the top side downward within ±30°
from the horizontal plane, it will switch to [FRONT/CEILING] automatically.
40°
40°
30°
30°
[FRONT/CEILING] [FRONT/DESK]
30 - ENGLISH
:
Projection direction
Loading...