Panasonic PT-AE1000E User Manual

Remote Control Operating Guide

rojecto

Features

Multiple home theatre system devices can be operated.

Devices such as projectors, DVD players/recorders, video decks, TVs, amplifiers, lighting device and electronic screens can be operated.

Remote control signals for other home theatre system devices can be set into this remote control.

Remote control signals for other home theatre system devices can be easily learnt.

Remote control signals for other home theatre system devices can be easily learnt for each corresponding button on this remote control.

Device codes can be entered

You can enter device codes to register several remote control signals all at once.

Home theatre system devices with unknown device codes can also be set.

The search function lets you search for device codes to use for setting.

Macro function makes operation even easier.

Using the operation macro function

A single button operation can invoke a maximum of 16 keypresses to carry out a total of 6 different operations for home theatre system devices.

Using the power supply macro function

A single button operation can turn the power supply for up to 8 different devices on and off at the same time.

Frequently-used functions can be programmed into function buttons.

Functions that you use often can be assigned to function buttons, so that these buttons can be used easily as shortcut buttons.

Customised display of frequently-used functions on the LCD is possible.

You can edit the characters that are used to indicate function buttons in the LCD, and you can also edit the device selection display.

P.3

P.6

P.7

P.8

P.10

P.12

P.13

P.14

Model No.

PT-AE1000

Contents

Names and functions of each part

Operation Quick Guide

Operating the projector Learning remote control signals directly from home theatre system devices Selecting and entering device codes Equipment code list

Setting remote control signals for home theatre systems

Learning remote control signals directly from home theatre system devices Selecting and entering device codes Setting home theatre system devices when you do not know the device code

Deleting home theatre equipment remote control signals

Deleting button functions one by one Deleting all settings all at once

Operating home theatre system devices with a single button press (operation macro function)

Setting the operation macro function Using the operation macro function Clearing the operation macro function

Turning the power for home theatre system devices on and off at once (power supply macro function)

Using the power supply macro function Setting the power supply macro function

Using the function buttons

Editing displays on the LCD

Editing the function button characters on the LCD Editing the device selection display

Appendices

LCD display list Remote control function list

Note:

Do not use the remote control to operate any other equipment apart from your home theatre system.

It may not be possible to operate some devices using this remote control.

(DELETE)

(OPS RESET)

１０

１２

１３１４

１５

２３

５

９

ع This remote control can be used to carry out simple setting operations for your home theatre system in addition to operating

the projector (PT-AE1000E).

ع Be sure to read this Remote Control Operating Guide carefully in order to use the devices safely. ع Also be sure to read the instructions for the projector and the home theatre system carefully when using the remote control. ع After reading this Operating Guide, keep it in a safe place for later reference

TQBJ0211

Names and functions of each part

Buttons shown in this colour are buttons that can be used for learnt functions.

Buttons that cannot be used for learnt functions LEARN, SETUP, system device selection Buttons that cannot be used for learnt functions when using a projector (PJ) MENU, ENTER, RETURN,



ًٕ

If you press any of the buttons marked as

Remote control emitter

Projector function only

This turns the projector power on and off when the projector's power is turned on

Liquid crystal display

The top shows the selected device, the bottom shows the functions of that device that can be operated.

If no remote control operations are carried out for 30 seconds or more, the LCD will switch off. If the LCD switches off while the device selection indicator for any component is flashing, the component that was last selected will be the one that will be operated.

Function buttons(A/B/C)

This displays menus

(※ p.15)

Projector function only

, the device selection will switch to "PJ".

(※"PJ" p.15)

This turns on button illumination for the remote control.

If no remote control operations are carried out for 30 seconds or more, the backlight will switch off. Once the backlight has turned off after 30 seconds, it can be turned back on by pressing any button. If you press a button to turn once more and then press it again within 30 seconds to turn the backlight off again, the backlight will not turn back on again when another button (other than "LIGHT") is pressed.

System device operation buttons

These buttons are used to operate system devices using preset functions for this remote control and also functions which have been learnt through signals from other remote controls.

Projector function only

This returns menu adjustment

These buttons are used for menu screen operations.

values to their factory defaults.

Projector function only

This adjusts the picture size and focus.

This switches the input source.

This switches the aspect ratio (the ratio between width and height of the screen).

This switches the picture mode.

This displays the input waveforms.

Note:

If operating the remote control by facing it directly towards the remote control receiver at the front of the projector,

the remote control should be within approximately 7 metres of the front of the remote control receiver. In addition, the remote control can be operated within an angle of +/- 30 degrees up, down or to the left or right. If there are any obstructions between the remote control and the remote control receiver, the remote control may not operate correctly. The projector can be operated by reflecting the signals from the remote control off the screen, but the operating

range for the remote control may be reduced as a result of losses in the amount of light reflected due to the characteristics of the screen.

This momentarily pauses images.

This sets the time to elapse before the power turns off automatically.

This displays the "MEMORY LOAD" menu.

This displays the "COLOUR MANAGEMENT" menu.

This displays the "PICTURE ADJUSTMENT" menu.

2 - ENGLISH

Operation Quick Guide

Operatinon

Operating the projector

Press "DEVICE"to select the projector,

and then press "ENTER".

(Example: When “DVD” is selected)

Alternatively, press any one of the buttons marked as "Projector function only".

Operating the home theatre system

Press "DEVICE", tilt the button to select the device to be operated, and then press

"ENTER".

Operation will change from home theatre system devices to the projector.

Learning remote control signals directly from home theatre system devices

Operations can be learnt for buttons one by one.

Note:

Remote control signals that are not infrared-type (wave

format) signals cannot be recorded. It may not be possible to record some types of signal.

There is a limit to the number of buttons that can be learnt. The maximum number will vary depending on the remote

control signals that are learnt, but generally the maximum number of keys that can be learnt is about 80. It may not be possible to learn remote control signals

correctly if the remote control's batteries are nearly spent.

Using the learning function

Press "LEARN" for 3 seconds or more and then press "ENTER".

Press "DEVICE"to select the home theatre

system device to be set.

(Example: When “DVD” is selected)

Perforation

Note:

At the time of purchase, the remote control is programmed

with remote control signals for Panasonic products. If the devices you are using cannot be operated by using

the default settings, refer to “Setting remote control signals for home theatre systems” ( p.5-) The default settings for USER1-3 are for these settings to

be empty. If device selection is set to "PJ", the home theatre system



buttons can be used to operate other home theatre system devices. Refer to "Remote control function list" .

(Example: When “DVD” is selected)

Press the button for the desired operation.

(Example: When playback is selected)

Place the projector’s remote control next to

the emitter of the home theatre system’s remote control.

Approx.

5 cm

Press the button on the projector’s remote

control that you would like to learn, and after "LEARNING?" is displayed, press the corresponding button on the home theatre system device’s remote control.

Projector’s

((

remote control

Example: When learning the

()

function of the playback button

If “ERROR” is displayed.

To learn another button, repeat step 4. If an operation macro has been assigned to the function button, signals cannot be learnt for that button.

If “ERROR” is displayed, return to step 4.

Home theatre system’s

))

remote control

After 5 seconds

You can tear off this page along the perforation to use it as a quick reference guide.

To finish, press "SETUP", and then check operation.

ENGLISH - 3

Operation Quick Guide

Selecting and entering device codes

You can have all remote control signals for a home theatre system device learnt all at once by entering the device code for that device.

Note:

Two or more equipment codes cannot be entered for the

same item of equipment. Equipment codes cannot be entered for “PJ”.

For device codes which have a remote control signal for

controlling the power supply, the remote control signal for the power supply will be transmitted when the device code is selected. Turn on the power supply for the device to be operated, and point the remote control towards it to test.

Setting method

Press "SETUP" for 3 seconds or more.

Select the equipment that you would like to set, and then press "Enter".

(Example: When selecting “DVD”)

Select the desired equipment code while referring to “Equipment code list”, and

then press "ENTER".

Note:

If the home theatre system cannot be operated with the code you have entered, enter the next equipment code that is listed.

If the home theatre system does not support this function, it will not operate when the buttons are pressed.

Equipment code list

Manufacturer

name

<DVD> DVD/DVD-R

Panasonic 0490, 0503, 0703, 1010, 1011, 1362, 1462, 1490, 1762, 1834, 1908 DENON 0490, 1634 GE 0522, 0717 HITACHI 0573, 0664, 0695 JVC 0503, 0539, 0623, 0867, 1164, 1940 LG 0591, 0741, 0790, 0869 Marantz 0539 MITSUBISHI 0521, 1403 ONKYO 0503, 0627, 1627 Philips 0503, 0539, 0646, 0675, 1818 Pioneer 0490, 0525, 0571, 0631, 1965 SAMSUNG 0490, 0573, 1075 SANYO 0670, 0695 SHARP 0630, 0675, 0752, 1256 SONY 0533, 0573, 0864, 1033, 1070, 1431 TOSHIBA 0503, 0695, 1045, YAMAHA 0490, 0539, 0545, 0646

Panasonic 0226, 0616, 0836, 1244, 1515, 1516, 1562 GE 0048, 0226, 0320 HITACHI 0000, 0037, 0042, 0081 JVC 0045, 0067, 0081 Kenwood 0067 LG 0037, 0042, 0045 MITSUBISHI 0000, 0043, 0048, 0067, 0081, 0642 Philips 0000, 0081, 0226, 0618, 0739 Pioneer 0042, 0067, 0081 SAMSUNG 0045, 0432, 0739 SANYO 0048, 0067, 0104, 0348 SHARP 0037, 0048 SONY 0000, 0032, 0034, 0636, 1972 TOSHIBA 0042, 0043, 0045, 0067, 0081, 0352, 0432, 1503, 1972 Victor 0067

Panasonic 0037, 0108, 0208, 0226, 0508, 0548, 0650, 0853, 1333, 1334, 1650 Bang & Olufsen 0565 GE 0093, 0178, 0560, 0625 HITACHI 0037, 0108, 0178, 0480, 0481, 0508, 0548, 0576, 0578, 1037 JVC 0093, 0508, 0606, 0650, 0653 LG 0037, 0108, 0178, 0556, 0714 MITSUBISHI 0037, 0093, 0108, 0178, 0512, 0556, 1037, 1171 Philips 0037, 0108, 0178, 0512, 0556 Pioneer 0037, 0170, 0512, 0760 SAMSUNG 0037, 0093, 0178, 0208, 0226, 0370, 0556, 0587, 0618, 1060, 1458 SANYO 0108, 0170, 0208, 0370, 0508 SHARP 0093, 0650, 1163, 1165, 1193, 1453 SONY 0037, 0093, 0170, 0650, 1167, 1505, 1651 Thomson 0037, 0335, 0560, 0625 TOSHIBA 0093, 0195, 0508, 0618, 0650, 0714, 1163, 1429, 1508 Victor 0650, 0653

Equipment code

<VCR> VCR

<TV> TV

Manufacturer

name

<CBL> Cable Converter

Panasonic 0000, 0008, 0107, 0375, 1488, 1758, 1759, 1760 Fujitsu 1497 LG 0144 Motorola 0476, 1376, 1483 NEC 1496 Pioneer 0144, 0533, 1500, 1877 Scientific Atlanta 0008, 0237, 0477, 1877 SONY 1006 TOSHIBA 0000

<SAT> Satellite Receiver

Panasonic 0247, 0701, 0847, 1104, 304, 1320, 1404, 1508, 1747, 1748, 1751, 1752, 1753, 1754, 1761, 1762, 1763 GE 0392 HITACHI 0819, 1284 JVC 0775, 1507 Marantz 0200 Pionnier 0329, 0352, 0853, 1308 SAMSUNG 0853, 1108, 1142, 1243, 1293, 1458, 1570 SONY 0282, 0639, 0847, 0853, 1639 Thomson 0392, 0713, 0820, 0847, 0853, 1175, 1291 TOSHIBA 0819, 1749

Audio Amplifier/Receiver

Panasonic 0309, 1288, 1308, 1316, 1518, 1548, 1633, 1763, 1764, 1765 Aiwa 0121, 1089 Bang & Olufsen 0799 BOSE 0674, 1357, 1629 DENON 0121, 1104, 1360 JVC 0074, 0331, 1495 KENWOOD 0186, 0712, 1313 Marantz 0891, 1089, 1189, 1269, 1289 ONKYO 0135, 1298, 1320 Philips 0891, 1089, 1189, 1269, 1289, 1673 Pioneer 0013, 0186, 1023, 1459, 1623, 1656 SAMSUNG 1424 SANYO 1801 SHARP 0186, 1614 SONY 0689, 1112, 1158, 1441, 1622, 1658, 1722, 1759, 1822, 1858 Technics 0309, 1308, 1309, 1518, 1633, 1763, 1765 TOSHIBA 0135 Victor 0074, 0331 YAMAHA 0176, 0186, 0354, 0712, 0848, 1276, 1331

OS 1954 Kikuchi 1951 Stewart 1951 NAVIO

Lutron 0318, 0597

Equipment code

2047

Perforation

4 - ENGLISH

You can tear off this page along the perforation to use it as a quick reference guide.

Setting remote control signals for home theatre systems

This remote control is programmed with remote control signals for Panasonic products at the time of purchase. If you would like to operate devices from other manufacturers, or if your Panasonic products cannot be operated, the following setting operations will be required.

Note:

Setting remote control signals for home theatre systems

To operate home theatre system devices other than the projector, set the remote control signals for operating those devices into the remote control.

Learning remote control signals directly from home theatre system devices

You can freely assign the remote control signals for your home theatre system devices to the buttons of this remote control one by one.

Do not use the learning function to record remote control signals from other learning remote controls that have been learnt by those remote controls. If this is done, operating errors may result.

If no operations are carried out for 60 seconds or more during the setup stage, operation will time out and the setting mode will be cancelled.

㧼㧢

Selecting and entering device codes

You can have all remote control signals learnt all at once by entering the device code which appears in the device code list .

㧼㧣

Setting home theatre system devices when you do not know the device code

For home theatre system devices for which you do not know the device code, you can use the search function to search or and set the device code.

㧼㧤

Deleting home theatre equipment remote control signals

You can delete remote control signals which have been programmed into the remote control.

Deleting settings for each button one by one (DELETE)

Deleting settings all at once (OPS RESET)

㧼㧥

Tip

If you would like to cancel a setting before it is complete··

Press "SETUP". Press "RETURN".

To return to the previous step in an operation

Tip

ENGLISH - 5

+ 11 hidden pages