Panasonic PT-56HX40CB, PT-56HX40B, PT-56HX40, PT-51HX40CB, PT-51HX40B Owner’s Manual

...
Panason,c
ColorVideoProjectionSystem Operating Instructions
PT-51HX40
PT-61HX40 PT-56HX40
ISSUE 0
TQB2AA0342 00320
PRINTED IN USA
Congratulations
Your new ProjectionTelevision(PTV) features state-of-the-arttechnology for high
quality picture and sound with complete audio/video connectionsfor your home
theater system.Your PTV isdesignedto give you many years of enjoyment. It was thoroughly testedand tuned atthefactoryfor best performance.
Customer Record
The model and serial number of this product are located on the back of the PTV. You shouldnote the model and serial number in the space provided andretain as a permanent
recordof your purchase. Thiswill aid in identification in the event oftheft or loss. Product registratonfor U.S. customersis available at: www.prodreg.com/panasonic.
Care and Cleaning
Projection Screen (Tum PTV Off)
CONGRATULATIONS
Model Number
Serial
Number
Specifications
"I'Veprojectionscreen is a highprecisionlens system whichhas a protectivescreen. The protectivescreen isfully washablewiththe followingprecautions:
[3 Use a mildsoap solutionor windowcleaner and a clean cloth.
DO NOT USE ABRASIVECLEANERS.
Do notuse laundrydetergentor automaticdishwashersoap.
Do notuse alcohol, ammonia,orpetroleum based products.
[3 Avoidexcessive moisture endwipe dry.
Preventsolution from runningintothe receiverbelow.
I-I Avoidbumpingor scrapingthe screen.
Cabinet and Remote Control
rl For cabinetsand remotecontrol, use a soft cloth dampenedwithwater or a mild
detergentsolution. Avoidexcessivemoistureand wipe dry.
t'l Do not usebenzene, thinneror otherpetroleum based products.
Power Source
PT.51HX40 (3.SA)
PT.r=6HX40(3.6A)
PT-61HX40 (3.6A)
Chain=CapahaW.181
4 Video Input Jacks
sA=eo=e=
Video Output Jack
=_ outp.tJa=_,
Component Input(Y/Pal PR)
H..,,
tVp-p, "/5Ohm, PhonoJackType
1Vp-p, 75 Ohm, Phono Jack Type
120V AC, 60Hz
VHF-12; UHF,ro6;Cable-125
500mV RMS47K Ohm
i
0-2J)V RMS4.7K Ohm
75 Ohm,PhonoJackType
s-woo:_'-c)
Specifications are subject to change without notice or obligation.
=i
Optional Equipment Connections
VCR Connection
Follow this diagram when connectingyour television to a VCR only.
INSTALLATION
_VCR
CABLES NOT SUPPLIED
IncomingCable
Note: The remote control must be programmed with supplied codes to operate the VCR. See
Programming the Remote Controlin the Remote Control Quick Reference Guide.
TERMINALSON BACK OF PTV
V_mwinga television program
Procedure
1. Select ANT1 in the SET UP menu under ProgChen (Program Channels).
2. Tune the television to the television programyou wantto view.
Viewing a video
Procedure
o option A
1. Select ANT1 in the SET UP menu under Prog Chen (Program Channels).
2. Press the TVNIDEO button on the remote control to select the video input (VIDEO 1,
VIDEO 2, etc.) connected to your VCR.
3. Begin the video.
O Option B
1. Select ANT2 in the SET UP menu under ProgChart (Program Channels).
2. Tune the television to Channel 3 or 4, dependingon yourVCR.
3. Beginthe video.
Recording a television program Procedure
C] Option A (Recording and viewing the same program)
1. Select ANT2 in the SET UP menu under ProgChan (Program Channels).
2. Tune the television to Channel 3 or 4, depending on your VCR,
3. Using the VCR, tune to the television programyouwant to record.
4. Begin recording.
_l Option B (Recording one programwhileviewing another program)
1. Select ANT1 inthe SET UP menu under ProgChart (Program Channels),
2. Press the W/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc,) connected to yourVCR.
3. Using the VCR, tune tothe television programyou want to record.
4. Begin recording.
5. Press the W/VIDEO buttonon the remote controlto switchbackto TV mode.
6. Tune the television to the television programyou wantto view.
la
INSTALL4 TION
Optional Equipment Connections (Cont.)
Open the door on the PTV front panel to use the connectionsfor your optional
equipment(Palmcorder,VCR, or other video components).Select input4 mode by
pressing TVN1DEO button.
CONNECTIONS OF FRONT OF PTV
Cable Box Connection Followfinisdiagramwhenconnectingyourtele_siontoa cableboxonly.
"_' O O @ 0
TERMINALSON BACKOF PTV
Cable Box
@ @
l INPUT OUTPUT 1
t-t
IncondngCab_from CabkaCompany
Note: The remote control must be programmed with suppl'_d codes to operate the cable
box. See Programming the Remote Control in the Remote Control Quick Reference
Guide.
Viewing a premium (ecramblec0 cable channel
Procedure
1. Select ANT2 in _e SET UP menu under Prog Chan (Program Channels).
2. Tune _e televisk_n to Channel 3.
3. Using finecable box, tune to the premium cable channel you want to _ew.
im
Note: To use special features such as Favorite Channels and Channel Captions (see Special
Features section for more information), ANT1 must be selected in the SET UP menu under Prog Chan.
Loading...
+ 16 hidden pages