Panasonic PT-53WX52 User Manual

HDTVProjectionMonitor OperatingInstructions

PT-47WX42 PT-47WX52

PT-53WX42 PT-53WX52

PT-56WX42 PT-56WX52

Forassistance,pleasecall:1-888-VIEW-PTVorsend e-mailto:consumerproducts@panasonic.com(USAonly)

TQB2AA0420-1 20418 PRINTEDINUSA

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WA RNIN G: To reduce the risk of electric shock do not remove cover or back.

No user-serviceable par ts i nside. Refer se rvicing t o qual ifie d servi ce per sonnel.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO

FCC CAUTION:

ENVIRONMENTAL NOTICE:

The lightning f lash with arrow head within a triangle is intended to tell the user that parts inside the product are a risk of electric shock to persons.

The exclamation p oint within a triangle is intended to tell the user that important operating and servicing instructions are in the papers with the appliance.

NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

ANY CHANGES OR MODIFICATIONS TO THIS PTV RECEIVER NOT EXPRESSLY APPROVED BY MATSUSHITA ELECTRIC CORPORATION OF AMERICA COULD CAUSE HARMFUL INTERFERENCE, WHICH

WOULD VOID THE USER’S AUTHORITY TO OPERATE THIS EQUIPMENT.

THIS PRODUCT UTILIZES CATHODE RAY TUBES (CRT) AND OTHER COMPONENTS THAT CONTAIN LEAD. DISPOSAL OF THESE MATERIALS MAY BE REGULATED IN YOUR COMMUNITY DUE TO ENVIRONMENTAL CONSIDERATIONS. FOR DISPOSAL OR RECYCLING INFORMATION PLEASE CONTACT YOUR LOCAL AUTHORITIES, OR THE ELECTRONICS INDUSTRIES ALLIANCE: <HTTP://WWW.EIAE.ORG.>

This product incorporates U.S. Patent 6,266,098 B1; Issue date: July 24, 2001; assigned to Matsushita Electric Corporation of America; other U.S. and foreign patents pending.

Manufactured under license from BBE Sound, Inc. Licensed by BBE Sound, Inc. under USP4638258 and 4482866.

High Definition Sound

Read these instructions completely before operating television. Contents are subject to change without notice or obligation.

BBE and BBE symbol are registered trademarks of BBE Sound, Inc.

INFORMATION REGARDING CONVERGENCE

In the projection television, the image is formed by projecting 3 different color images (red, green and blue) onto the projection screen . Convergence refers to the alignment of red, green and blue images on the projection screen. When these images a re properly aligned (converged), you see a sharp and vibrant col or image. Sometimes, the three

images may require alignment. This is due to the effect of earth’s magnetic field on the projection tubes. Normally, adjustment is not necess ary after the initi al ali gnment a t the cen ter of the s creen. It i s possi ble to cor rect the c olor fr ingi ng on other areas of the screen by using the but tons on the remo te control and by followin g the on-scr een instruc tions in th e set-up menu. Please converge the images before using the television for the first time. The following diagram shows examples of a misali gned ima ge and a prope rly al igned image. Please refer to pages 35 and 36 for detailed procedure on how to adjust convergence.

Misconverged image

Properly aligned image

1 l

ABLE OF CONTENTS

Congratulations.........................................................3

Customer Record ......................................................................3

Care and Cleaning.................. ....... ...... ....... ...... ...... ....... ...... ......3

Specifications ................................ ...... ......................................3

Installation..................................................................4

Television Location....................................................................4

Optional Cable Connections......................................................4

AC Power Supply Cord..............................................................4

Cable / Antenna Connection......................................................4

Care and Cleaning.....................................................5

Feature Comparison Chart .......................................6

Auto Set Up Menu......................................................7

Optional Equipment Connections ...........................8

VCR .........................................................................................8

Cable Box...................................... ...... ....... ...... ...... ....... ...... ......9

VCR and Cable Box ..................................................................9

Amplifier (TO AUDIO AMP).....................................................10

Front Control Panel .................................................................10

Program Out (PROG OUT) .....................................................11

Digital TV - Set-Top Box (DTV-STB) or DVD Players.............11

Special Remote Buttons.........................................12

PIP and Split Operations.........................................13

Remote Control Operation (models PT-47WX42,

PT-53WX42, and PT-56WX42..............................16

Mode Operational Key Chart ..................................................17

Programming the Remote .......................................................19

Programming Without a Code.................................................19

Component Codes.................. ....... ...................................... ....20

Remote Control Operation (models PT-47WX52,

PT-53WX52, and PT-56WX52..............................22

Mode Operational Key Chart ..................................................23

Programming the Remote .......................................................25

Programming Without a Code.................................................25

Component Codes.................. ....... ...................................... ....27

Roller Guide Menu™ Navigation............................30

Roller Guide Icons............................................ ..... ..32

Roller Guide Icon Menus.........................................................32

Icon Menus Operation.............................................33

V-Chip Menu Operation...........................................43

Troubleshooting Chart............................................49

Limited Warranty.....................................................50

Customer Services Directory.................................52

Index .........................................................................53

2 l

ONGRATULATIONS

Congratulations

Your new HDTV Projection Monitor features state-of-the-art technolog y for high quality picture and sound with c omplete audio/video connections for your home theater system. Your Projection TV is designed to give you many years of enjoyment. It was thoroughly tested and tuned at the factory for best performance.

Customer Record

The model and serial number of this product are located on the back of the TV set. You should note the model and serial number in the space provided and retain as a permanent record of your purchase. This will aid in identifi cation in the event of theft or loss. Product registration for U.S. customers is available at: www.prodreg.com/panasonic.

Model Number

Serial Number

Specifications

Power Source

Component Input (Y / PB / PR)

PT-47WX42 (4.2A) PT-47WX52 (4.2A) PT-53WX42 (4.2A) PT-53WX52 (4.2A) PT-56WX42 (4.2A) PT-56WX52 (4.2A)

Channel Capability - 181 VHF-12; UHF-56; Cable-113

Video Input Jacks 1Vp-p, 75 Ohm, Phono Jack Type Audio Input Jacks 500mV RMS 47K Ohm

Video Output Jack 1Vp-p, 75 Ohm, Phono Jack Type

Audio Output Jacks 0-2.0V RMS 4.7K Ohm

S-Video Input Jacks S-Video (Y-C) Connector

120V AC, 60Hz

75 Ohm, Phono Jack Type

Specifications are subject to change without notice or obligation

3 l

NSTALLATION

Installation

Television Location

This unit can be used as an entertainment center. Consult your dealer for available options.

r Avoid excessive sunlight or bright lights, including reflections. r Keep away from excessive heat or moisture. Inadequate ventilation may cause internal component failure. r Fluorescent lighting may reduce remote control transmitting range. r Keep away from magnetic equipment, including motors, fans and external sp eakers.

Optional Cable Connections

Shielded audio and video cables should be used between components. For best results:

r Use 75-ohm coaxial shielded cables. r Use appropriate input and output connectors, that match your component connectors. r Avoid long cables to minimize interference.

AC Power Supply Cord

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT OF AC OUTLET AND FULLY

INSERT. DO NOT USE A PLUG WITH A RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSU RE.

PROTECT POWER CORDS FROM BEING WALKED ON, ROLLED OVER, CRIMPED, BENT, OR PINCHED, PARTICULARLY AT PLUGS, CONVENIENCE RECEPTACLES, AND THE POINT WHERE THEY EXIT FRO M T HE APPARATUS.

Cable / Antenna Connection

For proper reception, either a cable or antenna connection is required.

Cable Connection

Connect the cable supplied by your local cable company to ANT1 connection on back of television. Select cable mode and ANT1 in SET UP menu under Prog Chan (Program Channels).

Note: A cable converter box may be required for proper reception. Check with your local cable company for

compatibility requirements.

Antenna Connections

• For proper reception of VHF/UHF channels, an external antenna is required. For best reception an outdoor antenna is recommended.

• Connect home antenna to ANT1 connection on back of television. Select TV mode and ANT1 in the

SET UP menu under Prog Chan.

Polarized plug

Incoming Cable from

Cable Company

75 Ohm VHF/UHF

on back of PTV

ncoming Cable from

Home Antenna

Cable Preset

Cable Mode is preset at the factory. Antenna users must change to TV Mode and ANT 1 in the Set Up menu.

4 l

ARE AND CLEANING

Care and Cleaning

Projection Screen (T urn set Off) (For Models PT-47WX52, PT-53WX52 and PT-56WX52)

The projection screen is a high precision lens system which has a protective screen. The protective screen is fully washable with the following precautions: r Use a mild soap solution or window cleaner and a clean cloth.

• DO NOT USE ABRASIVE CLEANERS.

• Do not use laundry detergent or automatic dishwasher soap.

• Do not use alcohol, ammonia, or petroleum based products.

r Avoid excessive moisture and wipe dry.

• Prevent solution from running into the receiver below.

r Avoid bumping or scraping the screen.

Note: Do not spray any type of cleaning fluid directly on the screen.

Projection Screen (Turn set Off) (For Models PT-47WX42, PT-53WX42 and PT-56WX42)

The projection screen is a high precision lens system which does not attract dust. r Occasional dusting with a feather duster or very soft brush using only up and down motions.

• Never rub across the screen using a side to side motion.

r Infrequent washing with a very weak solution of dishwashing soap using a soft, lint-free clean cloth.

• DO NOT USE ABRASIVE CLEANERS.

• Do not use window or glass cleaner, laundry detergent, automatic dishwasher soap, or abrasive cleaners.

• Do not use alcohol, ammonia, or petroleum based products.

r Avoid excessive moisture and wipe dry.

• Prevent solution from running into the receiver below.

r Avoid bumping or scraping the screen.

• Protect the very fine grooves on the screen which transport the picture.

Note: Do not spray any type of cleaning fluid directly on the screen.

Cabinet and Remote Control

r For cabinets and remote con trol, use a soft cloth dampened with water o r a mild detergent solut ion. Avoid excessive

moisture and wipe dry.

r Do not use benzene, thinner or other petroleum based products.

5 l

EATURE COMPARISON CHART

Feature Comparison Chart

MODELS

SPECIAL

AUDIO

A/V

FEATURES

JACKS

PT-47WX42

PT-47WX52

PT-53WX42

PT-53WX52

FEATURES

MENU LANGUAGE ENG/SPAN/FR

PROTECTIVE SCREEN

2 TUNER SPLIT

2 TUNER PIP

VIDEO INPUT SKIP

CLOSED CAPTIONING

V-CHIP CAPABILITY

DIGITAL SCAN RATE

NTSC LINE - DOUBLER

VIDEO NORM AUDIO NORM

STEREO

AI SOUND

BASS/BALANCE/TREBLE

SURROUND

BBE

A/V PROGRAM OUT

r r r r r r

r r r

r r r r r r r r r r r r

r r r r r r

r r r r r r r r r r r r

1080i, 480p

480p 480p 480p 480p 480p 480p

r r r r r r r r r r r r

r r r r r r

r r r r r r r r r r r r r r r r r r

1080i, 480p

A/V IN (REAR/FRONT) 4 (3/1) 4 (3/1) 4 (3/1) 4 (3/1) 4 (3/1) 4 (3/1)

AUDIO OUT

S-VHS INPUT (REAR/FRONT)

COMPONENT INPUT

r r r r r r

2/1 2/1 2/1 2/1 2/1 2/1 2 2 2 2 2 2

PT-56WX42

1080i, 480p

PT-56WX52

1080i, 480p

IMPORTANT INFORMATION REGARDING THE USE OF VIDEO GAMES, COMPUTERS, OR OTHER FIXED IMAGE DISPLAYS.

WARNING: The marking or retained image on the picture tube resulting from viewing fixed image is not an operating defect and as such is not covered by Warranty.

The projection television is designed to display constantly moving images on the screen. Continuous viewing of stationary images such as letter box pictures on standard screen TVs ( with top/bottom bars), n on-expanded s tandard (4:3) pictures on wide screen TVs (with si de bars s hown on each side of a n image), stock mark et report bars (ticker run ning at the bottom of the screen), video game patterns, fixed scoreboards, bright station logos, on-line (internet) or repetitive computer style patterns should be limited.

The extended use of fi xed image program mat erial can cause a perm anent picture tube dam age,

shown as a “shadow im age” viewable on normal program s. This type of irreversible pic ture tube deterioration can be limited by performing the following steps:

• Limit the display of fixed image program material to no more than 15% of total viewing time per week.

• Turn the power off when not in use.

6 l

UTO SET UP MENU

Auto Set Up Menu

For your convenience, Auto Set up menu will be displayed on screen when the set is turned on for the first time. If needed, follow the menus and procedures for setting up the features.

r IDIOMA/LANGUE - To change menu language to ENGLISH, SPANISH or FRENCH.

AUTO SET UP

IDIOMA/LANGUE

AUTO PROGRAM CONVERGENCE

PRESS ACTION TO EXIT

r MODE - To select TV (antenna) or CABLE mode depending on the signal source.

AUTO SET UP

IDIOMA/LANGUE

AUTO PROGRAM CONVERGENCE

PRESS ACTION TO EXIT

ENGLISH

CABLEMODE

ENGLISH

CABLEMODE

r Press VOL u to select English, Spanish or French.

u u

r Press VOL u to select TV or CABLE.

u u

r AUTO PROGRAM - To automatically program all channels with a signal.

AUTO SET UP

IDIOMA/LANGUE

AUTO PROGRAM

CONVERGENCE

PRESS ACTION TO EXIT

ENGLISH

CABLEMODE

r Press VOL u to start Auto Programming.

u u

r CONVERGENCE -To adjust the center convergence, if needed.

AUTO SET UP

IDIOMA/LANGUE

AUTO PROGRAM

CONVERGENCE

PRESS ACTION TO EXIT

ENGLISH

CABLEMODE

r Press VOL u to display Convergence adjustment menu.

u u

Note: Refer to page 35 for setting Convergence, if needed.

7 l

PTIONAL EQUIPMENT CONNECTIONS

Optional Equipment Connections

VCR Connection

Follow this diagram when connecting your television to a VCR only.

VCR

CONNECTIONS ON BACK OF THE PTV

VIDEO OUT

AUDIO OUT

ANT INANT OUT

ANT 1

Incoming Cable

SPLIT OUT

ANT 2

VIDEO

AUDIO

COMPONENT

VIDEO INPUTS

SVIDEO

INPUT 1INPUT 2INPUT

CABLES NOT SUPPLIED

Note: The remote control must be programmed with supplied codes to operate the VCR.

Viewing a television program Procedure

1. Select ANT1 in the SET UP menu under Prog Chan (Program Channels).

2. Tune the television to the television program you want to view.

Viewing a video Procedure

r Option A

1. Select ANT1 in the SET UP menu under Prog Chan.

2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected to your VCR.

3. Begin the video.

r Option B

1. Select ANT2 in the SET UP menu under Prog Chan.

2. Tune the television to Channel 3 or 4, depending on your VCR.

3. Begin the video.

Recording a television program Procedure

r Option A (Recording and viewing the same program)

1. Select ANT2 in the SET UP menu under Prog Chan.

2. Tune the television to Channel 3 or 4, depending on your VCR.

3. Using the VCR, tune to the television program you want to record.

4. Begin recording.

r Option B (Recording one program while viewing another program)

1. Select ANT1 in the SET UP menu under Prog Chan.

2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected to your VCR.

3. Using the VCR, tune to the television program you want to record.

4. Begin recording.

5. Press the TV/VIDEO button on the remote control to switch back to TV mode.

6. Tune the television to the television program you want to view.

PROG OUT

AMP

VIDEO

Use either the S-Video or Video connection.

TO AUDIO

8 l

Cable Box Connection

Follow this diagram when connecting your television to a cable box only.

PTIONAL EQUIPMENT CONNECTIONS

CONNECTIONS ON BACK OF THE PTV

AUDIO

VIDEO

COMPONENT

VIDEO INPUTS

SVIDEO

INPUT 1INPUT 2INPUT

PROG OUT

AMP

VIDEO

TO AUDIO

CABLE BOX

INCOMING CABLE

ANT IN

ANT OUT

CABLES NOT SUPPLIED

ANT 1

SPLIT OUT

ANT 2

Note: The remote control must be programmed with supplied codes to operate the cable box.

Viewing a premium (scrambled) cable channel Procedure

1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).

2. Tune the television to Channel 3.

3. Using the cable box, tune to the premium cable channel you want to view.

Note: To use special features such as Favorite Channels and Channel Captions ANT1 must be selected in the SET UP menu under

Prog Chan.

VCR and Cable Box Connection

Follow this diagram when connecting your television to both a VCR and a cable box.

VCR

VIDEO OUT

CONNECTIONS ON BACK OF THE PTV

VIDEO

SVIDEO

PROG OUT

AMP

VIDEO

AUDIO

COMPONENT

VIDEO INPUTS

INPUT 1INPUT 2INPUT

AUDIO

CABLE BOX

ANT OUT

ANT IN

AUDIO OUT

ANT OUTANT IN

Incoming Cable

SPLIT OUT

CABLES NOT SUPPLIED

ANT 1

ANT 2

Note: The remote control must be programmed with supplied codes to operate the VCR and cable box.

Viewing a premium (scrambled) cable channel Procedure

1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).

2. Tune the television to Channel 3.

3. Using the cable box, tune to the premium cable channel you want to view.

Note: To use special features such as Favorite Channels and Channel Captions ANT1 must be selected in the SET UP menu under

Prog Chan.

9 l

PTIONAL EQUIPMENT CONNECTIONS

VCR and Cable Box Connection (Contd.)

Recording a premium (scrambled) cable channel Procedure

1. Select ANT2 in the SET UP menu under Prog Chan.

2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected to your VCR.

3. Turn the VCR ON.

4. Tune the VCR to Channel 3 or 4, depending on the switch setting on the back of VCR.

5. Using your cable box, tune to the premium cable channel you want to record.

6. Begin recording.

Note: To view a different channel while recording:

• Select ANT1 in the SET UP menu under Prog Chan.

• Press the TV/VIDEO button on the remote control to TV mode.

• Tune the television to a television program (except another premium cable channel).

Amplifier Connection (TO AUDIO AMP)

To listen through a separate stereo system, connect an external audio amplifier TO AUDIO AMP outputs on back of television.

Note: TO AUDIO AMP terminals cannot be connected directly to external speakers.

Audio Adjustments

1. Select SPEAKERS ON located in the onscreen AUDIO menu.

2. Set amplifier volume to minimum.

3. Adjust television volume to desired level.

4. Adjust amplifier volume to match the television.

5. Select SPEAKERS OFF & VARIABLE AUDIO OUT from AUDIO menu.

6. Volume, mute, bass, treble and balance are now controlled through the television.

Note: Select SPEAKERS OFF & FIXED AUDIO OUT to control audio functions through the external amplifier.

CONNECTIONS ON BACK OF TV

CABLES NOT SUPPLIED

External Amplifier

ANT 1

SPLIT OUT

ANT 2

AUDIO

VIDEO

COMPONENT

VIDEO INPUTS

SVIDEO

INPUT 1INPUT 2INPUT

PROG OUT

AMP

VIDEO

TO AUDIO

Front Control Panel

The front control panel can be used to access menus and switch video mode when the remote control is not available.

ON/OFF INDICA TOR

POWER ON/OFF

Note: The S-VIDEO connection provides higher quality picture. It

overrides VIDEO 4 connections. Use INPUT 4, AUDIO L and R with S-VIDEO connection.

A second VCR, Camcorder, a video disc player, video game equipment or DSS equipment can al so be connected to th e video inputs. See the optional equipment manual for details.

Procedure

1. Connect equipment to front Audio/Video input jacks.

Press TV/VIDEO button to select VIDEO 4 input mode.

3. Operate optional equipment as instructed in equipment manual.

10 l

Note: The ON/OFF indicator LED (red) will be lit when set is on.

POWER

VOLUME

CHANNEL

ACTION TV/VIDEO

S-VIDEO

VIDEO4 L-AUDIO-R

CAMCORDER

PTIONAL EQUIPMENT CONNECTIONS

Program Out Connection (PROG OUT)

To use the television audio and video with optional equipment, connect the PROG OUT and TO AUDIO AMP connections on the back of the television.

CONNECTIONS ON BACK OF TV

VIDEO

ANT 1

SPLIT OUT

ANT 2

AUDIO

COMPONENT

VIDEO INPUTS

SVIDEO

INPUT 1INPUT 2INPUT

PROG OUT

AMP

VIDEO

TO AUDIO

CABLES NOT SUPPLIED

MONITOR

VCR

Procedure

1. Connect optional equipment to PROG OUT and TO AUDIO AMP terminals.

2. PROG OUT terminal display is the same as onscreen display.

3. See optional equipment manual for further instructions for recording and monitoring.

Digital TV - Set-Top Box (DTV-STB) or DVD Connection

This television is capable of displaying 1080i and 480p DTV signals when connected to a DTV Tuner set-top-box (STB). In order to view DTV programming, the STB must be connected to the component video inputs (Y, P

DTV signal must be available in your area. Select the output of the STB to either 1080i or 480p.

, PR) of the television. A

This television also utili zes a progressive scan doubler, which de-interlaces the NTS C signal and progr essively sca ns the image. This allo ws you to sit close to the TV a nd not see the thin bl ack horizo ntal lines ( venetian blin d effect) asso ciated with interlaced TV pictures.

Use this diagram to connect the Panasonic DTV-STB (Digital TV-Set-Top Box) or DVD Player to the back of your TV.

TERMINALS ON BACK OF DTV-STB OR DVD PLAYER

DTV INPUT TERMINALS ON BACK OF TV

CABLES NOT SUPPLIED

DIGITAL TV OUTPUT

MAIN

VIDEO

L-AUDIO-R

-VIDEO

PRP

R-AUDIO-L

NTSC OUTPUT

ANT 1

S-VIDEO

SPLIT OUT

ANT 2

AUDIO

VIDEO

COMPONENT

VIDEO INPUTS

SVIDEO

INPUT 1INPUT 2INPUT

PROG OUT

AMP

VIDEO

TO AUDIO

Note: There are 2 sets of three video inputs, Y, PB, and PR. Separate compone nt c olo r inputs provide luminance and c olo r separation.

Use the L (left) and R (right) audio inputs.

11 l

PECIAL REMOTE BUTTONS

Special Remote Buttons

ASPECT Button

Customer Options depending on Component Input Signal

INPUT SIGNAL DISPLAY ON SCREEN ASPECT BUTTON OPTIONS

1080i 16:9 only no options 480p (16:9) Default to 16:9 4:3, Full or Zoom (see below)

480p (4:3)

480i Default to JUST mode 4:3, Full, Just or Zoom (see below)

The ASPECT butt on on the remote control lets you choose one of fo ur display modes, depending on the format of th e received signal and your preferences.

Note: Will stretch picture horiz.

Input Signal

480i or 480p

4:3

480i or 480p

ZOOM

Default to FULL mode

ASPECT

Image on

16:9 Screen Size

4:3, Full or Zoom (see below)

Explanation

This will display a 4:3 picture at its standard 4:3 size with gray side bars. (Not recommended for viewing 4:3 pictures, may cause a permanent

image on screen if displayed for a prolonged period of time.)

This will expand the 4:3 picture uniformly (width and height) to full screen width and then reposition the picture vertically. (Recommended for

letterbox pictures.)

480i or 480p

480i

FULL

JUST

This will show picture at full screen size. (Recom men ded for anamorphic pictures.)

This will stretch the right and left edges of a 4:3 picture to fill the screen. The center of the screen will have aspect correction applied.

The size of the picture will depend on the original signal. (Recommended for regular TV viewing.)

BBE Button

Press this button to turn the BBE® sound feature On or Off. BBE® Sound technolog y enhances s peech intell igibility and restores the dynamic range of musical passages to provide outstanding natural sound.

SAP Button

Press this button t o let you cy cle through d ifferent audio mo des. If you a re receiv ing a ster eo program and you press the SAP button, you can cycle between STEREO and MONO.

12 l

PIP

AND SPLIT OPERATION

PIP and Split Operation

PIP Operation

This television includ es a two- tu ner Pic tur e In Picture (PIP) feature. This al lo ws y ou to wat ch two ( 2) li ve br oad ca sts at th e same time with or without an external video source such as a VCR, cable box, etc.

r Connect incoming cable to ANT 1 input on back of TV r Press PIP button to display PIP frame.

Main Picture

r Select channels for the PI P frame by pressing . r Select channels for the Main picture by pressing

or use the remote control numeric keypad.

r Press SWAP button to switch the PIP and MAIN PICTURE

source.

RECALL

r Press to view picture source status.

Note:

PIP Frame

Audio is from Main Picture only.

r Press PIP button to cancel PIP frame.

Split Operation

This feature lets you watch two different channels side by side with or without an external video source.

r Press SPLIT button to display Split screen. r Select channels for the Split screen by pressing

PIP CH

Main Picture with Audio

Note:

Split Picture no Audio

Audio is from Main Picture only.

r Select channels for the Main picture by pressing

or use the remote control numeric keypad.

r Press SWAP button to switch the SPLIT SCREEN and MAIN

PICTURE source.

r Press to view picture source status.

RECALL

r Press SPLIT button to cancel Split screen.

PIP CH

PIP and Split Operation With a Cable Box

To view premium (scrambled) cable channels through your cable box in the Main Picture:

Note: Use this procedure if you want to watch pre miu m cable channels in the M ain Picture while viewing a tele vision program or video

in the PIP or Split frame.

Procedure

r Select ANT 2 in the SET UP menu under Prog Chan (Program Channels). r Tune PTV to Channel 3. r Press PIP or SPLIT button on the remote control to display the PIP or Split frame.

Note: Audio is from the Main Picture only.

r Verify the Cable box is ON. r Choose channels for the Main Picture by tuning the cable box.

PIP CH

r Choose channels for the PIP or Split frame by pressing .

Note: Swap is not available when using the cable box to tune channels. If your cable box has video output, it can be

connected to the PTV to allow you to use all PIP or Split functions. See the equipment manual for more information.

13 l

PIP

AND SPLIT OPERATION

PIP and Split Operation (contd.)

TV/VIDEO Button (PIP and Split)

Press when PIP or Split frame is displayed to select desired input mode

CH #

Main Picture

CH #

Main Picture

COMPONENT 1 CO MPONENT 2 V IDE O 1

PIP Frame

COMPONENT 1

Split Frame

Search Button (PIP and Split)

This feature lets you scan through all available channels.

Main Picture

VIDEO 4

Search Frames

VIDEO 2VIDEO 3VIDEO 4

COMPONENT 2 VIDEO 1

VIDEO 2VIDEO 3

r Press PIP or SPLIT to display PIP or Split frame. r Press SEARCH button to display search frames.

r Press SEARCH again to stop search feature. PIP

or Split frame channel will be the last active search frame.

r Press PIP or SPLIT button to cancel PIP or Split

frame.

Move Button (PIP only)

This feature is used to move PIP frame to one of four corners.

Main Picture

PIP Frame

r Press PIP button to display PIP frame. r Press MOVE button to position PIP frame to desired

corner.

r Press PIP button to cancel PIP frame.

PIP MIN and PIP MAX Buttons

While PIP frame is displayed, press PIP MIN or PIP MAX button to vary the size of PIP frame.

r Press PIP button to display PIP frame.

MAX

PIP MIN PIP MAX

r Press or to size PIP frame.

Main Picture

MIN

r Press PIP to cancel PIP frame.

14 l

PIP and Split Operation (contd.)

FREEZE

Freeze Button (PIP and Split)

This feature is used to stop action in PIP or Split frame.

Main Picture

Main Picture Freeze Feature

This feature is used to stop action of the Main Picture in display it on a Split freeze frame.

Main Picture

Freeze frame

Main Picture Freeze frame

PIP or Split.

r Press PIP or SPLIT to display PIP or Split frame.

FREEZE

r Press to stop PIP or Split frame action.

r Press again to continue action. r Press PIP or SPLIT to cancel PIP frame.

r To stop action for Main picture, press while

PIP or Split frame is n ot displayed.

r Main Picture freeze will be displayed in a PIP or Split

frame, depending on the selection in the Freeze menu located in Picture Other ADJ2 section (ref er to page 40).

r Press again to cancel Main Picture freeze

frame.

Note: While Main Picture freeze frame is displayed, only

TV/VCR

move button is active for PIP, all other PIP and Split buttons has no effect (see chart below).

PIP

AND SPLIT OPERATION

FREEZE

TV/VCR

PIP, Split and Freeze Mode Buttons Operational Chart

This chart indicates the buttons that are operational with PIP, Split or Main Picture Freeze mode.

REMOTE

BUTTONS

PIP MODE SPLIT MODE

PIP MIN Size Smaller No Effect No Effect PIP MAX Size Larger No Effect No Ef f ect FREEZE Freeze PIP Frame Freeze Split Frame Display or Delete PIP CH Change Channel Change Channel No Effect SEARCH Displays Search Frames Displays Search Frames No Effect PIP Displays PIP Frame Displays PIP Frame No Effect SPLIT Displays Split Frame Displays Split Frame No Effect MOVE Move PIP Frame No Effect Move PIP Frame SWAP Swap With Main Picture Swap With Main Picture No Effect

MAIN PICTURE FREEZE MODE

15 l

1 2

5 8 0

EMOTE CONTROL OPERATION (MODELS

PT -47WX42, PT-53WX42

AND

PT-56WX42)

Remote Control Operation (models PT-47WX42, PT-53WX42 and PT-56WX42)

POWER

Press to turn ON and OFF.

MUTE

Press to mute sound. Press to display and cancel CC (Closed Caption).

Press to select remote operation.

ACTION

Press to access menus.

TV/VIDEO

Press to select TV, Vi deo mode.

BBE

BBE - Press to turn on or off. MENU- Press to access DBS or DVD menus.

SAP

Press to access second audio program.

VOL VOL

Press to adjust TV sound and navigate in menus.

Press to select next or previous channel and navigate in menus.

RECALL

Press to display time, channel, sleep timer, and other options.

EXIT

DBS functions button.

GUIDE

SEARCH - Press for PIP Search. GUIDE - DBS functions button.

Press numeric keypad to select any channel.

R-TUNE

Press to switch to previously viewed channel or video mode.

Battery Installation

Use two AA batteries:

Remove battery cover by pushing in and up near arrow. Install batteries matching (+) and (-) polarity signs. Replace the battery cover.

Note:

Incorrect installation can cause battery leakage and corrosion that will damage the Remote Control

16 l

EUR7613Z40

Precautions

• Replace batt eries in pairs.

• Do not mix battery types (zinc carbon

• Do not recharge, heat, short-circuit,

ASPECT

PROG

ASPECT - Select picture size (ratio) to match programming format. PROG - Press to enter minor number in a compound number.

*PIP MIN

REW

*SWAP PAUSE

*FREEZE

TV/VCR

*Split and PIP function buttons

Component function buttons

*SPLIT

PLAY

*MOVE

STOP

with alkaline). disassemble, or burn batteries.

*PIP CH

VCR /DBS CH

*PIP MAX

*PIP REC

EMOTE CONTROL OPERATION (MODELS

PT-47WX42, PT-53WX42

AND

PT-56WX42)

Mode Operational Key Chart

This chart defines the keys that a re operational in the selec ted component modes (TV, VCR, DBS, CABLE or DVD) after programming (if needed).

KEY NAME POWER SAP MUTE TV/VIDEO BBE/MENU CHAN UP CHAN DOWN VOL RIGHT VOL LEFT ACTION RECALL EXIT SEARCH/GUIDE 1 2 3 4 5 6 7 8 9 0

R-TUNE ASPECT

PROG PIP MIN

<<REW SIZE

PLAY PIP MAX

FF >> SWAP

PAUSE MOVE

STOP PIP/RECORD FREEZE/TV/VCR PIP CH

VCR/DBS CH

PIP CH VCR/DBS CH

TV MODE CABLE MODE DBS MODE

POWER POWER POWER

SAP ON/OFF - -

MUTE TV MUTE TV MUTE

INPUT SWITCH TV INPUT SWITCH TV INPUT SWITCH

BBE ON/OFF - DBS MENU CHANNEL UP CABLE CHANNEL UP DBS NAVIGATION UP CHANNEL DOWN CABLE CHANNEL DOWN DBS NAVIGATION DOWN

VOL + TV VOL + DBS NAVIGATION RIGHT VOL - TV VOL - DBS NAVIGATION LEFT ACTION - DBS MENU DISPLAY TV DISPLAY DBS PROG. INFO

- - DBS EXIT

PIP OR SPLIT SEARCH - DBS GUIDE

DIGIT 1 DIGIT 1 DIGIT 1 DIGIT 2 DIGIT 2 DIGIT 2 DIGIT 3 DIGIT 3 DIGIT 3 DIGIT 4 DIGIT 4 DIGIT 4 DIGIT 5 DIGIT 5 DIGIT 5 DIGIT 6 DIGIT 6 DIGIT 6 DIGIT 7 DIGIT 7 DIGIT 7 DIGIT 8 DIGIT 8 DIGIT 8 DIGIT 9 DIGIT 9 DIGIT 9 DIGIT 0 DIGIT 0 DIGIT 0

PREVIOUS CHAN OR VIDEO MODE

TV ASPECT - DBS PROGRAM

TV PIP MIN - -

TV PIP SIZE - -

TV PIP ON / OFF - -

TV PIP/SPLIT SWAP - -

MOVE PIP - -

TV PIP ON / OFF - -

PIP OR SPLIT FREEZE - -

PIP OR SPLIT CHANNEL

DOWN

TV PIP OR SPLIT

CHANNEL UP

CABLE PREVIOUS

CHANNEL

- DBS CHANNEL DOWN

- DBS CHANNEL UP

PREVIOUS DBS CHANNEL

17 l

EMOTE CONTROL OPERATION (MODELS

Mode Operational Key Chart (contd.)

KEY NAME

POWER SAP MUTE BBE/MENU TV/VIDEO CHAN UP CHAN DOWN VOL RIGH T VOL LEFT ACTION

RECALL EXIT

SEARCH/GUIDE 1 2 3 4 5 6 7 8 9 0 R-TUNE ASPECT/PROG PIP MIN

<<REW SPLIT

PLAY PIP MAX

FF>> SWAP

PAUSE MOVE

STOP PIP/RECORD FREEZE/TV/VCR PIP CH

VCR/DBS CH

PIP CH VCR/DBS CH

PT -47WX42, PT-53WX42

VCR MODE DVD MODE

POWER POWER

- -

TV MUTE TV MUTE

- -

TV INPUT SWITCH TV INPUT SWITCH

- NEXT CHAPTER

- PREVIOUS CHAPTER

TV VOLUME + NAVIGATION RIGHT

TV VOLUME - NAVIGATION LEFT

- -

ONSCREEN VCR

DISPLAY

- -

VCR REWIND SKIP SEARCH REW <<

VCR PLAY DVD PLAY

VCR FF SKIP SEARCH FF>>

VCR PAUSE DVD STILL

VCR STOP DVD STOP

VCR RECORD -

TV/VCR SWITCH OPEN/CLOSE

VCR CHANNEL

DOWN

VCR CHANNEL UP SLOW +

DVD DISPLAY

SLOW -

AND

PT-56WX42)

18 l

EMOTE CONTROL OPERATION (MODELS

PT-47WX42, PT-53WX42

AND

PT-56WX42)

Programming The Remote

The Universal Remote Control ca n be programmed to operate many manufacturers’ co mponents, using the component function buttons for VCR, DVD, CABLE or DBS. Follow the procedures for programming your Remote Control with or without a code for the component.

Default Modes For Remote Control

Device Operates Default

TV TV (Panasonic Only) Panasonic TV Codes VCR VCR (Preset) Panasonic VCR Codes DBS DBS (Preset) Panasonic DBS Codes CABLE CABLE (Preset) Panasonic DBS Codes DVD DVD, CD (Preset) Panasonic DVD Codes

Determine the manufacturer of the component and look in the table for the code.

Programming With a Code

Procedure

• Confirm that the external component is plugged in and operating.

• Turn the component off.

• Press and together, for at least 5 seconds.

ACTION

• Press appropriate component button on the Remote Control VCR, DVD, CABLE or DBS.

• Enter the 3-digit component code using the Remote Control numeric keypad (0 ~ 9 buttons).

POWER

• Press the Remote Control to test the component. If the procedure was successful, the component will turn on.

POWER

Helpful Hints: Unsuccessful Code

If the component does not operate with the Remote Control, repeat the procedure using another code. (Some brands have multiple codes). If an incorrect code is entered, or if the procedure takes longer than 30 seconds, the programming will fail.

Programming Without A Code

This procedure searches all codes and is called the “sequence method.”

• Confirm that the external component is plugged in and on.

• Turn the component off.

• Press and together, for at least 5 seconds.

• Press appropriate component button on the Remote Control.

• Press to move forward to the next code. Press to move backward.

• Press the Remote Control to test the component. If the procedure was successful, the component will turn on.

ACTION

VOL

Note: Repeat the above steps until the component code is found. It may take many attempts before the correct code

is found.

• After the code is found, press to store the code.

POWER

VOL

POWER

ACTION

19 l

EMOTE CONTROL OPERATION (MODELS

PT -47WX42, PT-53WX42

AND

PT-56WX42)

Component Codes

The Universal Remo te Control i s capable of operating many component brands after ent ering a c ode. Som e components may not operate because t he codes are not available due to limited memory. The Universal Remot e Control does not control all features found in each model.

Write the code numbers from tables in this space. This will serve as a reference if you need to program your Remote Control.

VCR

DVD

DBS

CABLE

Codes For VCR

Brand Code

Admiral Aiwa 332 Akai 314, 315, 316, 329 Audio Dynamic 311, 339 Bell & Howell 305, 313 Broksonic 320, 326 Canon 323, 325 CCE 343 Citizen 306 Craig 305, 306, 329 Curtis Mathes 324, 345 Daewoo 301, 324, 343 DBX 310, 311, 339 Dimensia 345 Emerson 303, 319, 320, 325, 326, 343 Fisher 305, 307, 308, 309, 313 Funai 320, 326, 334 GE 324, 333, 345 Goldstar 306 Gradiente 334 Hitachi 300, 323, 345 Instant Replay 323, 324 Jensen 339 JVC 310, 311, 334,339 Kenwood 306, 310, 311, 339 LXI 300, 305, 306,307, 308, 309 Magnavox 323, 324, 331 Marantz 310, 311, 339 Marta 306 Memorex 309, 324 MGA 338, 340, 341, 347,348 Minolta 300, 345 Mitsubishi 338, 340, 341, 347, 348 Multitech 304, 347 NEC 310,311, 334, 339 Olympic 323, 324 Optimus 306, 321, 328, 335

335

Brand Code

Orion 320, 326 Panasonic 321,322, 323, 324 J.C. Penney 300,305, 310, 311, 324, 339, 345 Pentax 300,311, 345 Philco 320, 323, 324, 326, 331, 343 Philips 323, 324, 331 Pioneer 323

Proscan Quasar 321, 322, 323, 324

Radio Shack 305, 309, 324, 333, 336, 340 RCA Realistic 305, 309, 324, 336, 340

Samsung 302, 304, 333 Sansui 320, 326, 339, 352 Sanyo 305, 309, 313

Scott Sears 300, 305, 306, 307, 308

Sharp 335, 336 Shintom 317 Signature 2000 335 Singer 337 Sony 328, 329, 330 Sylvania 331, 324, 331 Tashiro 306 Tatung 310, 311, 339 Teac 310, 311, 339 Technics 321, 322, 323, 324 Teknika 324 Toshiba 301, 346 Vector Research 311 Wards 306, 309, 335, 336, 344 Yamaha 305, 310, 311, 339 Zenith 306,344

300, 301, 302, 323, 324, 331, 333, 345, 346

300, 301,302, 323, 324, 331, 333, 345, 346

301, 302, 304, 309, 320, 326, 338, 340, 347, 348

20 l

EMOTE CONTROL OPERATION (MODELS

Component Codes (contd.)

PT-47WX42, PT-53WX42

Codes for Cable Box

AND

PT-56WX42)

Brand Code

ABC 224 Archer 225, 232 Cableview 205, 232 Citizen 205, 222 Curtis 212, 213 Diamond 224, 225, 232 Eagle 229 Eastern 234 GC Brand 205,232 Gemini 222 General

Instrument/ Jerrold

Hamlin 212, 218, 240, 241, 242, 245 Hitachi 203, 224 Macom 20 3, 204, 205 Magnavox 233 Memorex 230 Movietime 205, 232 Oak 202, 237,239 Panasonic 209, 210, 214 Philips 206, 207, 228, 229, 230 Pioneer 201, 216

Pulsar 205, 232

211, 219, 220, 221, 222, 223, 224, 225, 226, 227

Brand Code

Puser RCA 215 Realistic 232 Regal 212, 218, 240, 241, 242, 245 Regency 234 Rembrandt 205, 232, 237 Samsung 205 Scientific Atlanta 211, 212, 213 Slmark 201, 205 Sprucer 205, 210 Stargate 205, 232 Teleview 201, 205 Texscan 244 Tocom 235 Toshiba 204 Unika 225, 232 Universal 222, 232 Videoway 206 Viewstar 229, 230 Zenith 200, 217 Zenith / Drake

Satellite

232

200

Brand Code

Denon 100 Ferguson 10 1 JVC 109 Mitsubishi 105 Nordmende 101 Panasonic 100 Philips 103 Pioneer 102 RCA 101

Brand Code

Dish Network (Echostar)

Echo Star 105 Express VU 105, 115 G.E. 106 G.I. (General

Instrument) Gradiente 114 Hitachi 103, 111, 112 HNS (Hughes) 103 Magnavox 101, 102

105, 115, 116

108

Codes for DVD

Codes for DBS

Brand Code

Saba Samsung 110 Sharp 108 Sony 104 Technics 100 Thomson 101 Toshiba 103

101

Yamaha 100 Zenith 107

Brand Code

Panasonic Philips 101, 102 Primestar 108 Proscan 106, 109, 110, 113 RCA 106, 109, 110, 1 13 Sony 107 Star Choice 103, 108 Toshiba 100 Uniden 101, 102

104

21 l

1 2

5 8 0

EMOTE CONTROL OPERATION (MODELS

PT -47WX52, PT-53WX52

AND

PT-56WX52)

Remote Control Operation (models PT-47WX52, PT-53WX52 and PT-56WX52)

POWER

LIGHT

Press to turn ON and OFF.

SAP

Press to access second audio program.

MUTE

Press to mute sound. Press to display and cancel CC (Closed Caption).

Press to select remote operation.

ACTION

Press to access menus.

TV/VIDEO

Press to select TV or input modes.

BBE

BBE - Press to turn on or off. MENU - Press to access DBS or DVD menus.

Press to illuminate remote buttons.

ASPECT

Select picture size (ratio) to match programming format.

VOL VOL

Press to adjust TV sound and navigate in menus.

CH CH

Press to select next or previous channel and navigate in menus.

RECALL

Press to display time, channel, sleep timer, and other options.

EXIT

DBS functions button.

GUIDE

DBS functions button.

PROG

PAGE

DBS page up/down and DVD skip -/+ buttons.

Press numeric keypad to select any channel.

R-TUNE

Press to switch to previously viewed channel or input modes.

Battery Installation

Use two AA batteries:

Remove battery cover by pushing in and up near arrow. Install batteries matching (+) and (-) polarity signs. Replace the battery cover.

Note:

Incorrect installation can cause battery leakage and corrosion that will damage the Remote Control

22 l

EUR7603Z30

Precautions

• Replace batt eries in pairs.

• Do not mix battery types (zinc carbon

• Do not recharge, heat, short-circuit,

Press to enter minor number in a compound number.

*PIP MIN

REW

PAUSE

*FREEZE

TV/VCR

*PIP

*Split or PIP function buttons

Component function buttons

PLAY

STOP

*PIP CH VCR CH

*SPLIT *MOVE

with alkaline). disassemble, or burn batteries.

*PIP MAX

REC

*SEARCH

OPEN/CLOSE

*SWAP

EMOTE CONTROL OPERATION (MODELS

PT-47WX52, PT-53WX52

AND

PT-56WX52)

Mode Operational Key Chart

This chart defines which keys that are operational after programming (if needed), while in the selected remote control mode TV, DTV, CABLE, DBS, VCR, DVD ...etc.

KEY NAME POWER SAP MUTE ASPECT TV/VIDEO CHAN UP CHAN DOWN VOL RIGHT VOL LEFT ACTION BBE/MENU RECALL EXIT PAGE DOWN PAGE UP GUIDE 1 2 3 4 5 6 7 8 9 0

R-TUNE PROG

PIP MIN <<REW

PLAY

PIP MAX

>>FF PAUSE STOP RECORD FREEZE/TV/VCR

PIP CH VCR CH

SEARCH OPEN/CLOSE

PIP SPLIT MOVE

SWAP LIGHT

TV MODE DTV MODE CABLE MODE DBS MODE

POWER POWER POWER POWER SAP ON/OFF - - MUTE TV MUTE CBL MUTE TV MUTE TV ASPECT DTV ASPECT - DBS ASPECT

INPUT SWITCH TV INPUT SWITCH TV INPUT SWITCH TV INPUT SWITCH CHANNEL UP - CABLE CHANNEL UP DBS NAVIGATION UP CHANNEL DOWN - CABLE CHANNEL DOWN DBS NAVIGATION DOWN

VOL + NAVIGATION RIGHT CABLE VOL + DBS NAVIGATION RIGHT VOL - NAVIGATION LEFT CABLE VOL - DBS NAVIGATION LEFT ACTION ACTION ENTER DBS ACTION

BBE On or off STB MENU - STB MENU

DISPLAY STB PROGRAM INFO. TV DISPLAY STB PROG. INFO

- DTV EXIT - STB EXIT

- STB PAGE DOWN - STB PAGE DOWN

- STB PAGE UP - STB PAGE UP

- STB PRODGRAM GUIDE - DBS PRODGRAM GUIDE DIGIT 1 STB DIGIT 1 DIGIT 1 DIGIT 1 DIGIT 2 STB DIGIT 2 DIGIT 2 DIGIT 2 DIGIT 3 STB DIGIT 3 DIGIT 3 DIGIT 3 DIGIT 4 STB DIGIT 4 DIGIT 4 DIGIT 4 DIGIT 5 STB DIGIT 5 DIGIT 5 DIGIT 5 DIGIT 6 STB DIGIT 6 DIGIT 6 DIGIT 6 DIGIT 7 STB DIGIT 7 DIGIT 7 DIGIT 7 DIGIT 8 STB DIGIT 8 DIGIT 8 DIGIT 8 DIGIT 9 STB DIGIT 9 DIGIT 9 DIGIT 9 DIGIT 0 STB DIGIT 0 DIGIT 0 DIGIT 0

PREVIOUS CHAN OR VIDEO MODE

- DTV PROGRAM/DASH - STB PROGRAM/DASH

TV PIP MIN - - -

- - - -

TV PIP MAX - - -

- - - -

- - VCR RECORD STB RECORD

TV PIP OR SPLIT FREEZE - - STB/DTV/SAT SW

PIP OR SPLIT CHAN

SPLIT OR PIP SEARCH - - -

PIP ON/OFF - - SPLIT ON/ OFF - - MOVE PIP - - -

SWAP PIP OR SPLIT WITH

MAIN PICTURE

PREVIOUS DTV CHAN CABLE PREVIOUS STB PREVIOUS

- CABLE CHANNEL DOWN STB CHANNEL DOWN

- CABLE CHANNEL UP STB CHANNEL UP

- - -

REMOTE BUTTONS

23 l

EMOTE CONTROL OPERATION (MODELS

Mode Operational Key Chart (contd.)

KEY NAME VCR MODE

POWER SAP MUTE ASPECT

TV/VIDEO CHAN UP

CHAN DOWN

VOL RIGHT VOL LEFT

ACTION BBE/MENU

RECALL EXIT

PAGE DOWN

PAGE UP GUIDE 1 2 3 4 5 6 7 8 9 0

R-TUNE PROG

PIP MIN <<REW

PLAY PIP MAX

>>FF PAUSE STOP RECORD FREEZE/TV/

VCR VCR/DBS CHAN

VCR/DBS CHAN

SEARCH OPEN/

POWER POWER POWER POWER POWER POWER POWER

- - - - - - -

TV MUTE TV MUTE RCVR MUTE TV MUTE RCVR MUTE TV MUTE RCVR MUTE

- - - - - - -

TV INPUT SWITCH TV INPUT SWITCH TV INPUT SWITCH TV INPUT SWITCH TV INPUT SW TV INPUT SW

VCR CHANNEL UP NAVIGATION UP NEXT TRACK VCR CHANNEL UP - PVR UP TUNER +

VCR CHAN DOWN

TV VOLUME +

TV VOLUME - NAVIGATION LEFT

TV ACTION SELECT - TV ACTION - SELECT -

- DVD MENU - - - - -

ONSCREEN VCR

DISPLAY

- - - - - PVR Exit -

- SKIP - SKIP - - - - -

- SKIP+ SKIP+ - - - -

- TITLE NEXT TRACK - - PVR GUIDE DIGIT 1 1 CHAPT. TRACK 1 DIGIT 1 - DIGIT 1 AV 1 DIGIT 2 2 CHAPT. TRACK 2 DIGIT 2 - DIGIT 2 AV 2 DIGIT 3 3 CHAPT. TRACK 3 DIGIT 3 - DIGIT 3 AV 3 DIGIT 4 4 CHAPT. TRACK 4 DIGIT 4 - DIGIT 4 AV 4 DIGIT 5 5 CHAPT. TRACK 5 DIGIT 5 - DIGIT 5 CD DIGIT 6 6 CHAPT. TRACK 6 DIGIT 6 - DIGIT 6 TUNER DIGIT 7 7 CHAPT. TRACK 7 DIGIT 7 - DIGIT 7 PHONO DIGIT 8 8 CHAPT. TRACK 8 DIGIT 8 - DIGIT 8 TAPE DIGIT 9 9 CHAPT. TRACK 9 DIGIT 9 - DIGIT 9 AUX DIGIT 0 0 CHAPT. TRACK 0 DIGIT 0 - DIGIT 0 -

- - - - DECK A/B

- - - - -

VCR REWIND

VCR PLAY DVD PLAY CD PLAY VCR PLAY TAPE PLAY PVR PLAY -

VCR FF

VCR PAUSE DVD PAUSE CD STILL/PAUSE VCR PAUSE TAPE PAUSE PVR PAUSE -

VCR STOP DVD STOP CD STOP VCR STOP TAPE STOP PVR STOP -

VCR RECORD - - VCR RECORD TAPE RECORD PVR RECORD -

TV/VCR SWITCH - - TV/VCR SWITCH -

VCR CHANNEL

DOWN

VCR CHANNEL UP SLOW + REPLAY VCR CHANNEL UP - - CENTER +

- OPEN/CLOSE OPEN/CLOSE - OPEN/CLOSE QUICK SKIP -

CLOSE PIP SPLIT MOVE SWAP

- - - - - - -

LIGHT

(DVD) (CD)

NAVIGATION

DOWN

NAVIGATION

RIGHT

DVD DISPLA Y TIME FORMAT

SKIP RESEARCH

SLOW - RANDOM

DVD MODE

FF>>

PT -47WX52, PT-53WX52

(VCR2) (TAPE) (PVR)

PREVIOUS TRACK TV/RCVR VOLUME

TV/RCVR VOLUME

DOWN

RESEARCH

REWIND

REMOTE BUTTONS

VCR CHANNEL

DOWN

TV VOLUME +

TV VOLUME -

ONSCREEN VCR

DISPLAY

VCR REWIND TAPE REWIND PVR REWIND SURROUND -

VCR FF TAPE FF PVR FF SURROUND +

VCR CHANNEL

DOWN

AND

PT-56WX52)

AUX MODE

RCVR

VOLUME +

RCVR

VOLUME -

RCVR

MODE

RCVR INPUT

- PVR DOWN TUNER -

PVR RIGHT

PVR LEFT

- PVR ENTER -

REPLAY

ZONES

RETURN TO

LIVE

INSTAND

REPLAY

- - CENTER -

RCVR

VOLUME +

RCVR

VOLUME -

24 l

EMOTE CONTROL OPERATION (MODELS

PT-47WX52, PT-53WX52

AND

PT-56WX52)

Programming The Remote

The Universal Remote Control ca n be programmed to operate many manufacturers’ co mponents, using the component function buttons for VCR, DVD, AUX, RCVR, TV, DTV CABLE or DBS. Follow the procedures for programming your Remote Control with or without a code for the component.

Default Modes For Remote Control

Device Operates Default

TV TV (Panasonic Only) Panasonic TV Codes DTV DTV (Panasonic Only) Panasonic DTV Codes CABLE CABLE (Preset) Panasonic CABLE Codes DBS DBS (Preset) Panasonic DBS Codes VCR VCR (Preset) Panasonic VCR Codes DVD/CD DVD and CD (Preset) Panasonic DVD Codes

AUX RCVR Audio Receiver (Preset) Panasonic RCVR Code

Personal Video Recorders,

Tape and VCR2

Panasonic Personal Video

Recorders Code

Determine the manufacturer of the component and look in the table for the code.

Procedure

• Confirm that the external component is plugged and operating.

• Turn the component off.

• Press and together, for at least 5 seconds.

ACTION

• Press appr op riate co mpo nen t butto n on the Rem ote Contr ol VCR , DVD ( CD), A UX ( VC R2 or TAPE), RCVR, DTV, CABLE or DBS.

• Enter the 3-digit component code us ing the Re mot e Con tro l n umer ic ke yp a d (0 ~ 9 butto ns) .

• Press the Remote Control to test the component. If the procedure was successful, the component will

turn on.

POWER

Helpful Hints: Unsuccessful Code

Programming Without A Code

This procedure searches all codes and is called the “sequence method.”

• Confirm that the external component is plugged in and on.

• Turn the component off.

• Press and together, for at least 5 seconds.

ACTION

• Press appropriate component button on the Remote Control.

• Press

VOL u to move forward to the next code. Press t VOL to move backward.

• Press the Remo te Contr ol to test the compo nent. If the pro cedure w as su cces sful, the co mponent will t urn on.

Note: Repeat the above steps until the component code is found. It may take many attempts before the correct code

is found.

• After the code is found, press to store the code.

POWER

ACTION

25 l

EMOTE CONTROL OPERATION (MODELS

PT -47WX52, PT-53WX52

AND

PT-56WX52)

Component Codes

Write the code numbers from tables in this space. This will serve as a reference if you need to program your Remote Control.

VCR

DVD

DVD (CD)

AUX (VCR 2)

AUX (TAPE)

RECEIVER

Brand Code

Admiral Aiwa 332 Akai 314, 315, 316, 329 Audio Dynamic 311, 339 Bell & Howell 305, 313 Broksonic 320, 326 Canon 323, 325 Citizen 306 Craig 305, 306, 329 Curtis Mathes 324, 345 Daewoo 301, 324, 343 DBX 310, 311, 339 Dimensia 345 Emerson 303, 319, 320, 325, 326, 343 Fisher 305, 307, 308, 309, 313 Funai 320, 326, 334 GE 324, 333, 345 Goldstar 306 Gradiente 334 Hitachi 300, 323, 345 Instant Replay 323, 324 Jensen 339 JVC 310, 311, 334, 339 Kenwood 306, 310, 311, 339 LXI 300, 305, 306, 307, 308, 309 Magnavox 323, 324, 331 Marantz 310, 311, 339 Marta 306 Memorex 309, 324 MGA 338, 340, 341, 347, 348 Minolta 300, 345 Mitsubishi 338, 340, 341, 347, 348 Multitech 304, 347 NEC 310,311, 334, 339 Olympic 323, 324 Optimus 306, 321, 328, 335

335

DTV CABLE DBS

Codes For VCR

Orion 320, 326 Panasonic 321, 322, 323, 324 J.C. Penney 300, 305, 310, 311, 324, 339, 345 Pentax 300, 311, 345 Philco 320, 323, 324, 326, 331, 343 Philips 323, 324, 331 Pioneer 323

Proscan Quasar 321, 322, 323, 32 4

Radio Shack 305, 309, 324, 333, 336, 340 RCA Realistic 305, 309, 324, 336, 340

Samsung 302, 304, 333 Sansui 320, 326, 339, 352 Sanyo 305, 309, 313

Scott Sears 300, 305, 306, 307, 308

Sharp 335, 336 Shintom 317 Signature 2000 335 Singer 317 Sony 328, 329, 330 Sylvania 323, 324, 331 Tashiro 306 Tatung 310, 311, 339 Teac 310, 311, 339 Technics 321, 322, 323, 324 Teknika 324 Toshiba 301, 346 Vector Research 311 Wards 306, 309, 335, 336, 344 Yamaha 305, 310, 311, 339 Zenith 306, 344

Brand Code

300, 301, 302, 323, 324, 331, 333, 345, 346

301, 302, 304, 309, 320, 326, 338, 340, 347, 348

26 l

EMOTE CONTROL OPERATION (MODELS

Component Codes (contd.)

PT-47WX52, PT-53WX52

Codes for Cable Box

AND

PT-56WX52)

Brand Code

ABC 124 Archer 125, 132 Cableview 105, 132 Citizen 105, 122 Curtis 112, 113 Diamond 124, 125, 132 Eagle 129 Eastern 134 GC Brand 105, 132 Gemini 122 General

Instrument/ Jerrold

Hamlin 112, 118, 140, 141, 142, 145 Hitachi 103, 124 Macom 10 3, 104, 105 Magnavox 133 Memorex 130 Movietime 105, 132 Oak 102, 137, 139 Panasonic 109, 110, 114 Philips 106, 107, 128, 129, 130 Pioneer 101, 116

Pulsar 105, 132

111, 119, 120, 121, 122, 123, 124, 125, 126, 127

Brand Code

Puser RCA 115 Realistic 132 Regal 112, 118, 140, 141, 142, 145 Regency 134 Rembrandt 105, 132, 137 Samsung 105 Scientific Atlanta 111, 112, 113 Slmark 101, 105 Sprucer 105, 110 Stargate 105, 132 Teleview 101, 105 Texscan 144 Tocom 135 Toshiba 104 Unika 125, 132 Universal 122, 132 Videoway 106 Viewstar 129, 130 Zenith 100, 117 Zenith / Drake

Satellite

132

100

Brand Code

Denon 100 Ferguson 101 JVC 109 Mitsubishi 105 Nordmende 101 Panasonic 100 Philips 103 Pioneer 102 RCA 101

Codes for DVD

Brand Code

Saba Samsung 110 Sharp 108 Sony 104 Technics 100 Thomson 101 Toshiba 103

Yamaha 100 Zenith 107

101

Codes for Personal Video Recorders

Brand Code

Panasonic Replay TV 100 Philips Tivo 101 Sony Tivo 102

27 l

EMOTE CONTROL OPERATION (MODELS

Component Codes (contd.)

PT -47WX52, PT-53WX52

Codes for DBS

AND

PT-56WX52)

Brand Code

Dish Network (Echostar)

Echo Star 105 Express VU 105, 115 G.E. 106 G.I. (General

Instrument) Gradiente 114 Hitachi 103, 111, 112 HNS (Hughes) 103 Magnavox 101, 102

Brand Code

Admiral 226 Aiwa 233, 235 Carver 229 Denon 242 Emerson 239 Fisher 205 Harman/Kardon 219, 220, 221, 223 Hitachi 207 Jensen 234 JVC 240, 241, 245 Kardon 223 Kenwood 200, 201, 211, 245 LXI/Sears 236 Magnavox 229, 232 Marantz 229 McIntosh 221 Nakamichi 210 Onkyo 214, 215 Optimus 208, 218, 220, 222

105, 115, 116

108

Codes for CD

Brand Code

Panasonic Phillips 101, 102 Primestar 108 Proscan 106, 109, 110, 113 RCA 106, 109, 110, 1 13 Sony 107 Star Choice 103, 108 Thoshiba 100 Uniden 101, 102

Brand Code

Panasonic 224, 225, 227 Philips 229, 230 Pioneer 208 Quasar 224, 225, 227 RCA 231, 237, 238, 247 Sansui 210, 246 Sanyo 205 Scott 210, 246 Sharp 242, 243 Sherwood 220 Sony 228 Soundesign 244 Teac 212, 216, 218 Technics 224, 225, 227 Victor 240, 241, 245 Yamaha 202,203, 204

104

28 l

+ 82 hidden pages

Panasonic PT-53WX52 User Manual

Table of Contents

Congratulations

Customer Record

Specifications

Installation

Television Location

Optional Cable Connections

AC Power Supply Cord

Cable / Antenna Connection

Care and Cleaning

Feature Comparison Chart

Auto Set Up Menu

Optional Equipment Connections

CABLE BOX

Front Control Panel

Special Remote Buttons

Mode Operational Key Chart

Programming The Remote

Programming Without A Code

Component Codes

Mode Operational Key Chart

Programming The Remote

Programming Without A Code