Panasonic PN25488-TH Product Specification

Model Name
Model No.
GA-AS48TPoE+
Product Specification
PN25488-TH
401-25488-TH-SP02
Page 1 of 8
1. Summary
GA-AS48TPoE+ has 50 ports which are 10BASE-T/100BASE-TX/1000BASE-T compatible ports.
Ports 1 to 48 (twisted pair ports) support IEEE802.3at PoE power supply functions.
2. Feature
(1) Ports 1 to 50 (twisted pair ports) are 10BASE-T/100BASE-TX/1000BASE-T corresponding to auto-negotiation.
(2) The twisted pair ports 1 to 48 can supply power conforming with IEEE802.3at. They can supply a maximum of 30 W of power per port,
and the device total can supply a maximum of 336 W of power.
(3) All of the twisted pair ports are equipped with straight/cross cable automatic detection functions. Straight cables can be used to make
interconnections without distinctions between the terminals and network devices having to be made. (The factory default is for ports 1 to 48 to have MDI-X be fixed.)
(4) If equipped with IEEE802.3az (LPI) compatible Energy Efficient Ethernet functions (hereinafter EEE), and if data is transmitted when
linked up, the energy efficient state will be moved to, whereas each port can suppress power consumption.
(5) Automatically detects the connection states via the equipped energy efficiency mode, and suppresses power consumption to required
levels.
(6) VLAN function allows free grouping of up to 256 VLANs.
(7) The IEEE802.1p compatible QoS function is supported.
(8) Has an Internet Mansion function, which ensures security between each door.
(9) The Switching Hub settings can be configured via a web browser. Since the IP address is not set when the Switching Hub is shipped
from the factory, it can be changed by connecting the computer and the Switching Hub which have the ZEQUO assist Plus that is on the CD-ROM installed on them with the twisted pair cables.
Date issued
Date revised
May. 12, 2017
Oct. 1, 2020
Model Name
Model No.
GA-AS48TPoE+
PN25488-TH
3. Rated/Environmental Conditions
3-1. Power supply
3-2. Power consumption
3-3. Operating environment
3-4. Storage environment
3-5. EMC compliance
3-6. Safety compliance IEC 60950-1
3-7. Environment compliance
4. Form
4-1. Form and materials/colors
4-2. Mass(Weight) 6,050g
401-25488-TH-SP02
Product Specification
Page 2 of 8
AC100-240V, 50/60Hz, 4.0A (with a built-in power supply)
Normally, Max.435.2W (51.4W when not supplying power), Min.33.3W Temperature: 0 - 40℃(※)
Humidity: 20 - 80%RH (no condensation)
Temperature: -20 - 70℃ Humidity: 10 - 90%RH (no condensation)
CISPR 22 Class A, EN 55022 Class A, EN 55032 Class A AS/NZS CISPR22 Class A VCCI Class A EN 61000-3-2, EN 61000-3-3 CISPR 48, EN 55048 IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-11
EN 60950-1
RoHS compliant
Dimensions :44mm(Height)×440mm(Width)×386mm(Depth)
(Excluding protruding sections) Case material :SECC Color : Main unit: Green 03, Front face: Black 03,
Face plate label: Black 04
5. Hardware Specifications
5-1. Interface
Twisted pair port 1-50 :RJ45 connector ※1 Transmitting and receiving network system :IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX
IEEE802.3ab 1000BASE-T Energy Efficient Ethernet :IEEE802.3az (LPI) ※2 Transmission speed :10/100Mbps full/half duplex,
1000Mbps full duplex,
Compatible cable :Twisted pair cable
(At least equivalent to EIA/TIA568 category 5e)
If there is Category 3 cable used in a
connection, the communication at a speed of 10Mbps can not be established. You must use category 5e or higher
crossover cable. Maximum transmission distance :100m Auto-Negotiation :Communication speed and full/half duplex
are automatically recognized. The setting can be fixed to 10Mbps, 100Mbps, 1000Mbps and full duplex or half duplex.
Up to 336 W of power can be supplied to ports 1 to 48 in total. (Maximum power supplied to a port: 30.0W) ※1 Automatically detects the connection states via the equipped Power Saving Mode,
and suppresses power consumption to required levels.
Factory default : Half
※2 Port 1-48 equipped with IEEE802.3az (LPI) compatible Energy Efficient Ethernet
functions(hereinafter EEE), and if data is transmitted when linked up, the energy efficient state will be moved to, whereas each port can suppress power consumption. Factory default : Enable
Date issued
Date revised
May. 12, 2017
Oct. 1, 2020
Model Name
Model No.
GA-AS48TPoE+
PN25488-TH
5. Hardware Specifications
401-25488-TH-SP02
Product Specification
Page 3 of 8
5-2. Switching mode
5-3. LED display
Switching method :Store and Forward Switching capacity :96.0Gbps Packet transfer capability :Non-blocking
Max 14,880pps/port(10Mbps) Max 148,800pps/port(100Mbps)
Max 1,488,000pps/port(1000Mbps) MAC Address table :Max 16K entry/unit Buffer memory :1.5M Byte/unit Flow control :half-duplex Back pressure
full-duplex IEEE802.3x Aging timeout :10to 1,000,000 sec. Jumbo frame supported :9KB Transmittable frames :EAP, BPDU HOL Blocking
(1)POWER(Power)LED
Green Light :Power is ON Off :Power is OFF
(2)STATUS (status) LED
Green Light : System is normally operating Green Blink : After powering on, and the system startup is completed,
blinks for five minutes
Orange Light : System is starting up
Orange Blink: System is malfunctioning
(3) PoE LIM. (PoE limit) LED
Off : Supplies power in a range of 0 – 329 W
Green Light : Supplies power in a range of 329 W – 336 W Green Blink : When the requested power supply capacity exceeds 336 W
(overload of the device overall)
(4) Port LED (Left)
LINK/ACT (ports 1-50) LED Green Light : Link is established. Green Blink : Data is being sent/received. Off : No terminal is connected.
5-4. Cascade connections
5-5. FAN Installed
Date issued
Date revised
May. 12, 2017
Oct. 1, 2020
(5) Port LED (Right)
PoE (ports 1-48) LED Green Light : Power is supplied normally. Green Blink : Overload power supply Off : Power is not supplied or PoE receiving equipment is not connected.
Port 1-50 corresponding to the Auto MDI / MDI-X (Allowed change by the setting for the application) The factory default is for ports 1 to 48 are fixed to be MDI-X.
Loading...
+ 5 hidden pages