Panasonic PN25048-ID Specification

Model	GA-AS4TPoE+		401-25048-ID-SP02
Name		Product Specification
Model	PN25048-ID		Page 1 of 7
No.

1. Summary

GA-AS4TPoE+ has six ports which are 10BASE-T/100BASE-TX/1000BASE-Tcompatible ports. Ports 1 to 4 (twisted pair ports) support IEEE802.3at PoE power supply functions.

2. Feature

1 Ports 1 to 6 (twisted pair ports) are 10BASE-T/100BASE-TX/1000BASE-Tcorresponding to auto-negotiation.

2 The twisted pair ports 1 to 4 can supply power conforming with IEEE802.3at. They can supply a maximum of 30 W of power per port, and the device total can supply a maximum of 62 W of power.

3 All of the twisted pair ports are equipped with straight/cross cable automatic detection functions. Straight cables can be used to make interconnections without distinctions between the terminals and network devices having to be made.

(The factory default is for ports 1 to 4 to have MDI-X be fixed.)

4 If equipped with IEEE802.3az (LPI) compatible Energy Efficient Ethernet functions (hereinafter EEE), and if data is transmitted when linked up, the energy efficient state will be moved to, whereas each port can suppress power consumption.

5 Automatically detects the connection states via the equipped energy efficiency mode, and suppresses power consumption to required levels.

6 VLAN function allows free grouping of up to 256 VLANs.

7 The IEEE802.1p compatible QoS function is supported.

8 Has an Internet Mansion function, which ensures security between each door.

9 The Switching Hub settings can be configured via a web browser. Since the IP address is not set when the Switching Hub is shipped from the factory, it can be changed by connecting the computer and the Switching Hub which have the ZEQUO assist Plus that is on the CD-ROM installed on them with the twisted pair cables.

	Date issued	Nov. 7, 2016	Panasonic Life Solutions Networks Co., Ltd.
	Date revised	Oct. 1, 2020

Model		GA-AS4TPoE+						401-25048-ID-SP02
Name						Product Specification
Model		PN25048-ID							Page 2 of 7
No.
3.	Rated/Environmental Conditions
	3 1.	Power supply		AC100-240V, 50/60Hz, 1.7A (with a built-in power supply)
	3 2.	Power consumption			Normally, Max.77.1W 6.3W when not supplying power , Min.4.3W
	3 3.	Operating environment			Temperature: 0 - 50
					Humidity:		20 - 80%RH no condensation
	3 4.	Storage environment			Temperature: -20 - 70
					Humidity:		10 - 90%RH no condensation
	3 5.	EMC compliance			CISPR 22 Class A, EN 55022 Class A, CISPR 32 Class A, EN 55032 Class A
					AS/NZS CISPR22 Class A
					VCCI Class A
					EN 61000-3-2, EN 61000-3-3
					CISPR 24, EN 55024
					IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5,
					IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-11
	3 6.	Safety compliance		IEC 60950-1
				EN 60950-1
	3 7.	Environment compliance			RoHS compliant
4.	Form
	4 1.	Form and materials/colors		Dimensions			44mm Height ×210mm Width ×210mm Depth
							Excluding protruding sections
				Case material			SECC
				Color			: Main unit: Green 03, Front face: Green 03,
							Face plate label: Green 02
	4 2.	Mass Weight		1,700g

5. Hardware Specifications

5 1. Interface

Twisted pair port 1-6	RJ45 connector	1
Transmitting and receiving network system
	IEEE802.3	10BASE-T
	IEEE802.3u	100BASE-TX
	IEEE802.3ab	1000BASE-T
Energy Efficient Ethernet	IEEE802.3az (LPI) 2
Transmission speed	10/100Mbps full/half duplex,
	1000Mbps full duplex,
Compatible cable	Twisted pair cable
	At least equivalent to EIA/TIA568 category 5e
	If there is Category 3 cable used in a
	connection, the communication at a
	speed of 10Mbps can not be established.
	You must use category 5e or higher
	crossover cable.
Maximum transmission distance	100m
Auto-Negotiation	Communication speed and full/half duplex
	are automatically recognized.
	The setting can be fixed to 10Mbps, 100Mbps,
	1000Mbps and full duplex or half duplex.

Up to 62 W of power can be supplied to ports 1 to 4 in total. (Maximum power supplied to a port: 30.0W)

1 Automatically detects the connection states via the equipped Power Saving Mode, and suppresses power consumption to required levels.

Factory default : Half

2 Port 1-4 equipped with IEEE802.3az (LPI) compatible Energy Efficient Ethernet functions(hereinafter EEE), and if data is transmitted when linked up, the energy efficient state will be moved to, whereas each port can suppress power consumption. Factory default : Enable

	Date issued	Nov. 7, 2016	Panasonic Life Solutions Networks Co., Ltd.
	Date revised	Oct. 1, 2020

Model

GA-AS4TPoE+

401-25048-ID-SP02

Name

Product Specification

Model

PN25048-ID

Page 3 of 7

No.

5. Hardware Specifications

5 2.

Switching mode

Switching method

Store and Forward

Switching capacity

12.0Gbps

Packet transfer capability

Non-blocking

Max 14,880pps/port 10Mbps

Max 148,800pps/port 100Mbps

Max 1,488,000pps/port 1000Mbps

MAC Address table

Max 8K entry/unit

Buffer memory

512K Byte/unit

Flow control

half-duplex

Back pressure

full-duplex

IEEE802.3x

Aging timeout

10 to 1,000,000 sec.

Jumbo frame supported

9KB

Transmittable frames

EAP, BPDU

5 3.

LED display

1 POWER Power LED

Green Light Power is ON

Off

Power is OFF

2 STATUS (Status) LED

Green Light System is normally operating

Green Blink : After powering on, and the system startup is completed,

blinks for five minutes

Orange Light System is starting up

Orange Blink System is malfunctioning

3 PoE LIM. (PoE limit) LED

Off

: Supplies power in a range of 0 – 55 W

Green Light : Supplies power in a range of 55 W – 62 W

Green Blink : When the requested power supply capacity exceeds 62 W

(overload of the device overall)

4 Port LED (Left)

LINK/ACT (ports 1-6) LED

Green Light : Link is established.

Green Blink : Data is being sent/received.

Off

: No terminal is connected.

5 Port LED (Right)

PoE (ports 1-4) LED

Green Light : Power is supplied normally.

Green Blink : Overload power supply

Off

: Power is not supplied or PoE receiving equipment is not connected.

LED(Left)

LED(Right)

5 4.

Cascade connections

Port 1-6 corresponding to the Auto MDI / MDI-X

(Allowed change by the setting for the application)

The factory default is for ports 1 to 4 are fixed to be MDI-X.

5 5.

FAN

Not installed

	Date issued	Nov. 7, 2016	Panasonic Life Solutions Networks Co., Ltd.
	Date revised	Oct. 1, 2020