Panasonic PM-F64 User Manual

The connector connection type eliminates the extra work of soldering
and insulation processing. In addition, the connector used is a
commercially-available multi-purpose connector which is also currently

used by the DP-100 series of digital
pressure sensors.

Digital pressure sensor
DP-100 series

PM-64 SERIES

U-SHAPED MICRO PHOTOELECTRIC SENSOR

Determining the pallet position Sensing the starting point on a rotating

body

Sensing the starting point and overrun of a
moving body

The connector is built into the sensor. This greatly reduces the amount
of space taken up compared to previous products.

PM-64

Built-in Connector Type

25.4 mm

1.000 in

2.1 mm

0.083 in

( )

Previous model

PM-T64

PM-Y64

PM-R64

PM-F64

PM-L64

PM-K64

PM-T64

PM-Y64

PM-R64

PM-F64

PM-L64

PM-K64

SUNX also has multi-purpose connectors available for small-lot orders.
Model No.: CN-14A
Contents: Set of housings 10 & contacts 40
Connector attached cable is also available.
Model No.: CN-14A-C
Cable length:

1 m, 2 m, 3 m, 5 m 3.281 ft, 6.562 ft, 9.843 ft, 16.404 ft

Multi-purpose connectors

New concept

Built-in connector saves space!!

SPECIFICATIONS

Conforming to
EMC Directive

6 types are available for selection based on installation conditions.6 types are available for selection based on installation conditions.

Type

Model No.

Sensing range
Minimum sensing object
Repeatability
Supply voltage
Output

Output operation

Response time

Emitting element

5 mm 0.197 in (fixed)

0.8

1.8 mm 0.0310.071 in opaque object

0.01 mm 0.0004 in or less

5 to 24 V DC

10 % Ripple P-P 10 % or less

NPN open-collector transistor

Incorporated with 2 outputs: Light-ON / Dark-ON

Infrared LED (peak emission wavelength: 940 nm 0.037 mil, non-modulated)

Under light received condition: 20 !s or less
Under light interrupted condition: 100 !s or less

(response frequency: 1 kHz or more)

Small

Connector type

PM-K64 / PM-T64 / PM-L64 / PM-Y64 / PM-F64 / PM-R64

Contributes to space savings

Can be connected using commercially-available
connectors for higher reliability

22.3 mm

0.878 in

11 mm

0.433 in

( )

APPLICATIONS

Pallet is stopped
by sensing the
dog.

The starting point
can be sensed by
making a slit in the
rotating body.

Starting point
and overrun is
sensed using the
dog on the base.

26 mm

1.024 in

23 mm

0.906 in

Starting point

Starting point sensing

Overrun sensing

Overrun sensing

Dog

No.LCE-PM64-5 May, 2006

2431-1 Ushiyama-cho, Kasugai-shi, Aichi,
486-0901, Japan
Phone: [phone]
FAX: [phone]

SUNX Limited

Phone: [phone]
FAX: [phone]

Overseas Sales Dept.

http://www.sunx.co.jp/

All information is subject to change without prior notice.

DIMENSIONS (Unit: mm in)

Sensor Sensor

PM-K64 PM-T64

Sensor Sensor

PM-L64 PM-Y64

Sensor Sensor

PM-F64 PM-R64

Operation indicator
(Orange)

Beam axis width:

0.8 0.031
Center of
beam axis

Center of beam axis

2-"3.2 "0.126 mounting holes

6.8

0.268

7.4

0.291

3.2

0.126

2.1

0.083

2.1

0.083

5

0.197

7

0.276

13.8

0.543

2.6

0.102

20

0.787

20

0.787

3.7

0.146

1.7

0.067

26

1.024

Locking
part

Locking
part

3.5

0.138

"3.2 "0.126
mounting holes

Operation indicator (Orange)

Center of beam axis
and boss

5

0.197

2.5

0.098

3

0.118

9

0.354

7

0.276

8.2

0.323

2.6

0.102

Center of beam
axis and boss

"2.4 "0.094

Center of beam axis and boss

7

0.276

7

0.276

Center of beam axis

Center of beam axis

6.4

0.252

7.2

0.283

7

0.276

8.3

0.327

13.4

0.528

5

0.197

12.8

0.504

3.2

0.126

3.5

0.138

2.6

0.102

26.2

1.031

12.8

0.504

2.1

0.083

2-"3.2 "0.126 mounting holes

20

0.787

1.7 0.067

3.7 0.146

2-mounting oblong holes

Operation indicator (Orange)

Locking part

7

0.276

3

0.118

7

0.276

9

0.354

23

0.906

Center of beam axis

13.4

0.528

5

0.197

2.6

0.102

7.4

0.291

20

0.787

26

1.024

6.2

0.244

3.2

0.126

1.6

0.063

4.1

0.161

Operation indicator
(Orange)

2-mounting
oblong holes

2-mounting oblong holes

Connector attached cable CN-14A-C (Optional)

Connector attached cable
CN-14A-C (Optional)

Connector attached cable
CN-14A-C (Optional)

Locking part

Connector attached cable
CN-14A-C (Optional)

Connector attached cable
CN-14A-C (Optional)

Connector attached cable
CN-14A-C (Optional)

2-"3.5 "0.138 mounting holes

Operation indicator (Orange)
Locking part

Center of beam axis

Center of
beam axis

6.4

0.252

2.5

0.098

6.5

0.256

9

0.354

5

0.197

15.5

0.610

7

0.276

3.5

0.138

7

0.276

2.6

0.102

2.1

0.083

2.1

0.083

Beam axis width:

0.8 0.031

Beam axis width:

0.8 0.031

Beam axis width:

0.8 0.031

Beam axis width:

0.8 0.031

"3.2 "0.126
mounting holes

Operation indicator (Orange)

Center of beam
axis and boss

5

0.197

13.4

0.528

2.5

0.098

3

0.118

9

0.354

7

0.276

8.2

0.323

2.6

0.102

Center of beam axis
and boss

"2.4

"0.094

Center of beam axis and boss

7

0.276

7

0.276

Beam axis width:

0.8 0.031

2.1

0.083

PM-L64

PM-L64

Locking part

23

0.906

9

0.354

( )

13.4

0.528

13.7

0.539

13

0.512

( )

10.5

0.413

15.7

0.618

( )

15.5

0.610

9

0.354

20

0.787

22.7

0.894

( )

12.9

0.508

13.8

0.543

13.4

0.528

23

0.906

( )

16.3

0.642

14

0.551

16.3

0.642

14

0.551

( )

23

0.906

The CAD data in the dimensions can be downloaded from the SUNX website: http://www.sunx.co.jp/
The CAD data is available in 2-D (dxf) and 3-D (IGES, STEP and Parasolid) formats.