Panasonic PMEH8 Operating Instructions

Manufactured by:

for

Before attempting to connect or operate this product, please read these instructions completely.

INDOOR SPECIALTY HOUSING

81-IN3033-9922

Installation and
Operating Instructions

Models Include: PMEH8

SPECIFICATIONS:

HOUSING BODY: PMEH8, 14-gauge steel with an ivory

powdercoat finish

WINDOW: PMED8, 3/16" clear lexan
MOUNTING PLATE: 18 gauge steel
NOTE: Max. storage space is 8"
(Panasonic 1/3" Camera Class with
Panasonic Fixed Focal Lens Series)

use only class #2 power supplies

GENERAL INSTRUCTIONS:

1. Carefully remove unit from box. Refer to Figure 1 for
dimensions of the housing.

2. Remove the housing top by removing the (4) #8-32 bolts
using a Phillips screwdriver.

3. Install the camera on the camera bracket by using the
1/4-20 bolt provided. Position of the camera bracket is
adjustable depending upon the camera size and viewing
angle.

4. Position housing in desired location and mark location of
the four mounting holes.

5. Pass electrical and video cables through the access hole in
the back of the housing. There are two knockouts in the
bottom of the housing if needed.

6. Secure housing in place (hardware not included).

7. Adjust camera angle and tighten camera bracket.

8. Attach housing top back to the housing using the (4) #8-32
bolts.

Figure 1

11.0"

5.625"

4.625"

QTY. PART NUMBER DESCRIPTION

A 1 30-VL1281* PMEH8 HOUSING TOP
B 1 30-VL1310 PMEH8 MOUNTING PLATE
C 1 WDCEM20* REPLACEMENT WINDOW FOR PMEH8
D 4 90-BTSES01* 8-32x1/2 SS SECURITY HEAD SCREW
E 2 90-BTHH11 1/4-20 X 1/2 HEX HD ZINC
F 2 92-WSFL01 1/4 SAE FLAT WASHER 18-8 SS
G 2 92-WSSL01 1/4 SPLIT LOCKWASHER 18-8 SS
H 1 30-VL787 CE20C CAMERA MOUNT BRKT
I 2 90-BTSR21 6-32 X 1/4" RD PHILLIPS SS

IMPORTANT SAFEGUARDS

1. Read Instructions - All the safety and operating
instructions should be read before the unit is operated.

2. Retain instructions - The safety and operating
instructions should be retained for future reference.

3. Heed Warnings - All warnings on the unit and in the
operating instructions should be adhered to.

4. Follow Instructions - All operating and user instructions
should be followed.

5. Electrical Connections - Only a qualified electrician
should make electrical connections.

6. Attachments - Do not use attachments not recom
mended by the product manufacturer as they may
cause hazards.

7. Cable Runs - All cable runs must be within permissible
distance.

8. Mounting - This unit must be properly and securely
mounted to a supporting structure capable of sustaining
the weight of the unit. Accordingly,

a. The installation should be made by a qualified

service person and should conform to all local
codes
b. Care should be exercised to select suitable hard

ware to install the unit, taking into account both

the composition of the mounting surface and the

weight of the unit. Be sure to periodically examine

the unit and the supporting structure to make sure

that the integrity of the installation is intact.

Failure to comply with the foregoing could result in the
unit separating from the support structure and falling,
with resultant damages or injury to anyone or anything
struck by the falling unit.

SAFETY PRECAUTIONS

CAUTION

RISK OF ELECTRIC

SHOCK!

CAUTION: TO REDUCE THE RISK OF

ELECTRICAL SHOCK, DO NOT EXPOSE

COMPONENTS TO WATER OR MOISTURE.

The lightning flash with an arrowhead
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of non-insulated "
dangerous voltage" within the
product's enclosure that may be of
sufficient magnitude to constitute a
risk of electric shock to persons.

The exclamation point within an
equilateral triangle is intended to
alert the user to presence of
important operating and
maintenance (servicing) instructions
in the literature accompanying the
appliance.

UNPACKING

.

Unpack carefully. Electronic components can be dam­aged if improperly handled or dropped.

If an item appears to have been damaged in shipment,
replace it properly in its carton and notify the shipper.

Be sure to save:

1. The shipping carton and packaging material. They are
the safest material in which to make future shipments of
the equipment.

2. These Installation and Operating Instructions.

SERVICE

For service on Panasonic/Videolarm equipment contact:

Panasonic Technical Center
54 West Gude Dr.
Rockville MD 20850-1150

Phone: [phone]
Fax: [phone]

PANASONIC TECHNICAL SUPPORT

1-800-528-6747

9:00 AM - 5:00 PM EASTERN TIME