Panasonic PCH9 Operating Instructions
1
Manufactured by:
81-IN3040-9922
Before attempting to connect or operate this product, please read these instructions completely.
for
MODEL: Indoor Corner Housings
PCH9
STANDARD INSTALLATION PROCEDURE
Remove equipment from box, contents include:
1 Corner mount housing
1 Camera bracket
1 Toolhead driver for security fastener (One tool per
housing)
NOTE: Max. storage space ia 9.5"
(Panasonic 1/3" Camera Class with
Panasonic Vari-Focal Lens Series)
RISK OF ELECTRICAL SHOCK, DO NOT EXPOSE
!
THIS APPLIANCE TO RAIN OR MOISTURE.
1. Remove contents from box.
2. Loosen security fasteners with toolhead driver and open
front half of housing.
3. Housing window is shipped with a self adhesive paper on
both sides to protect it from scratching. Carefully run a sharp
razor blade around the outside perimeter of the window and
peel off paper.
4. Camera bracket can be mounted into housing two differÂent ways depending on camera size and desired angle. (see
figure 1)
5. Place housing in corner and mark the location of the (4)
mounting holes.
6. Pass electrical and video cable through hole provided in
back of housing.
Use only with Class 2 Power Supply.
!
7. Mount housing by bolting to wall.
8. Make electrical and camera connections.
9. Adjust camera angle and tighten camera bracket. Do not
remove nuts to adjust bracket, just loosen.
10. Close housing and tighten security fasteners.
PRODUCT INSTRUCTIONS
FIGURE #
BOLT HERE
OR
BOLT HERE
1. Read Instructions - All the safety and operating instructions
!
should be read before the unit is operated.
2. Retain Instructions - The safety and operating instructions
should be retained for future reference.
3. Heed Warnings - All warnings on the unit and in the operating
instructions should be adhered to.
4. Follow Instructions - All operating and user instructions should
be followed.
5. Electrical Connections - Only a qualified electrician should
make electrical connections.
6. Attachments - Do not use attachments not recommended by the
product manufacturer as they may cause hazards.
7. Cable Runs - All cable runs must be within permissible distance.
8. Mounting - This unit must be properly and securely mounted to
a supporting structure capable of sustaining the weight of the
unit. Accordingly:
a. The installation should be made by a qualified service person
and should conform to all local codes.
b. Care should be exercised to select suitable hardware to install
the unit, taking into account both the composition of the
mounting surface and the weight of the unit. Be sure to
periodically examine the unit and the supporting structure to
make sure that the integrity of the installation is intact. Failure
to comply with the foregoing could result in the unit separating
from the support structure and falling, with resultant damages
or injury to anyone or anything struck by the falling unit.
SAFETY PRECAUTIONSIMPORTANT SAFEGUARDS
CAUTION
RISK OF
ELECTRIC SHOCK!
CAUTION: TO REDUCE THE RISK OF
ELECTRICAL SHOCK, DO NOT EXPOSE
COMPONENTS TO WATER OR MOISTURE.
The lightning flash with an arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of non-insulated
"dangerous voltage" within the product's
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to
!
UNPACKING
Unpack carefully. Electronic components can be
damaged if improperly handled or dropped. If an item
appears to have been damaged in shipment, replace it
properly in its carton and notify the shipper.
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
Be sure to save:
1. The shipping carton and packaging material. They are the
safest material in which to make future shipments of the
equipment.
2. These Installation and Operating Instructions.
SERVICE
For service on Panasonic/Videolarm equipment contact:
Panasonic Technical Center
54 West Gude Dr.
Rockville MD 20850-1150
Phone: 301-762-5125
Fax: 301-251-0347
PANASONIC TECHNICAL SUPPORT
1-800-528-6747
9:00 AM - 5:00 PM EASTERN TIME
- 2 -
Loading...