Panasonic MC-UG581-01 Service Manual
Vacuum Cleaner
MC-UG581-01
Order Number MAC1002001CE
Specifications are subject to change without notice for further improvement.
© 2010 PANASONIC HOME APPLIANCES
COMPANY OF AMERICA, DIVISION OF
PANASONIC CORPORATION OF NORTH
AMERICA. All rights reserved. Unauthorized copying
and distribution is a violation of law.
MC-UG581-01
CONTENTS
Page Page
1 WIRING DIAGRAM AND DRAWING 3
1.1. Wiring Diagram
1.2. PICTORIAL DIAGRAM
2 EXPLODED VIEW AND PARTS LIST
2.1. Body
2.2. Nozzle Housing
2.3. Packing Material
3 REPLACEMENT INSTRUCTIONS
3
4
5
5
7
9
3.1. Lower Plate Replacement
3.2. Belt Replacement
3.3. Agitator Assembly Replacement
3.4. NOZZLE HOUSING REPLACEMENT
3.5. Motor Replacement
10
10
10
10
11
11
2
1 WIRING DIAGRAM AND DRAWING
1.1. Wiring Diagram
MC-UG581-01
3
MC-UG581-01
1.2. PICTORIAL DIAGRAM
NOTE:
For general servicing, it is necessary to eliminate pinching of any wire during reassembly. After servicing any electrical
component or electrical enclosure, the vacuum cleaner should be reassembled and checked for dielectric breakdown or current
leakage.
Use part number AC79FCWZZ 000 (FIBERGLASS CLOTH TAPE) whenever original tape is removed.
4
Loading...