Panasonic M16eG Specification
Model
Name
Model
No.
Switch-M16eG
Product Specification
PN28160K-ID
1. Summary
Switch-M16eG is an all Giga bit Ethernet Switching Hub with management function having 14 ports of
10/100/1000BASE-T and two pairs of 10/100/1000BASE-T port and SFP extension slot, one of which is selectable.
2. Feature
（1） Has wire-speed Layer 2 switching function.
（2） Ports 1 to 14 are 10/100/1000BASE-T ports corresponding to auto-negotiation.
Also their speed and communication mode can be switched by configuration.
Ports 15 and 16 can be used as a 10/100/1000BASE-T port corresponding to auto-negotiation or an SFP extension slot
exclusively.
Also their speed and communication mode can be switched by configuration.
（3） All twisted pair ports support straight/cross cable auto sensing function.
Simply connect devices with straight cables, whether it is a terminal or a network device.
(This function does not work if the port communication configuration is set at Fixed or Link Aggregation.
Ports 1 to 14 are set at MDI-X. (default))
（4） Has a loop detection function, which notifies when a loop occurs with the corresponding port LED and automatically
shuts down the looped port.
401-28160K-ID-SP02
Page 1 of 10
（5） Has a loop detection history function, which notifies when a loop occurs with the corresponding LED and enables a network
administrator to identify the looped port after the loop is removed.
（6） Fan less design solves noise problem or fan failure.
（7） Due to the ECO mode LED function, Port LED lamps (left) can be turned off to reduce power consumption.
（8） The IEEE802.1p compatible QoS function is supported.
（9） Has an internet mansion function, which ensures security between each port.
（10） Due to the loop detection/shutoff function, a port where loop has occurred can be automatically shut off to prevent loop failures.
When a port is shut off and recovered automatically, SNMP trap can be sent to notify the incident to the administrator.
Moreover, the port with a loop can be identified by loop notification on the LEDs on the main unit and referring the history
of loop on the setting screen.
（11） Has a port grouping function, which groups ports that are allowed to communicate with one another to limit communications
between different groups.
（12） Equipped with energy efficient Ethernet (EEE) conforming to IEEE802.3az (LPI).
When there is no data transmission at link up, the energy-saving state automatically starts so that power consumption
can be reduced on each port.
（13） Using Embedded power-saving mode, connection status is automatically detected and power consumption is minimized.
（14） Supports IEEE802.1Q tagging VLAN. Up to 256 groups of VLAN can be registered.
（15） Supports IEEE802.1X user authentication function (EAP-MD5/TLS/PEAP).
（16） Supports ZEQUO assist Plus. Processes from introduction to maintenance can be performed easily.
Date issued
July 12, 2016
Panasonic Life Solutions Networks Co., Ltd.
Date revised
Oct. 1, 2020
Model
Name
Model
No.
Switch-M16eG
PN28160K-ID
3. Rated/Environmental Conditions
3-1. Power supply
3-2. Power consumption
3-3. Operating environment Temperature: 0 - 50℃
3-4. Storage environment
3-5. EMC compliance CISPR 22
3-6. Safety compliance IEC 60950-1
3-7. Environment compliance
401-28160K-ID-SP02
Product Specification
Page 2 of 10
AC100-240V, 50/60Hz, 0.5A (with a built-in power supply)
Normally, Max.13.2W, Min.6.4W
Humidity: 20 - 80%RH （no condensation）
Temperature: -20 - 70℃
Humidity: 10 - 90%RH （no condensation）
EN 55022 Class A
AS/NZS CISPR22 Class A
VCCI Class A
EN 61000-3-2, EN 61000-3-3
CISPR 24
EN 55024
IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5,
IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-11
EN 60950-1
RoHS compliant
4. Form
4-1. Form and materials/colors
4-2. Mass（Weight） 2,200g
Dimensions ：44mm（Height）×330mm（Width）×230mm（Depth）
（Excluding protruding sections）
Case material ：SECC
Color : Main unit: Green 03, Front face: Black 03,
Face plate label: Black 04
Date issued
Date revised
July 12, 2016
Panasonic Life Solutions Networks Co., Ltd.
Oct. 1, 2020
Model
Name
Model
No.
Switch-M16eG
PN28160K-ID
5. Hardware Specifications
401-28160K-ID-SP02
Product Specification
Page 3 of 10
5-1. Interface
5-2. Switching mode
5-3. Terminal emulator
connection
Twisted pair port 1-16 ：RJ45 connector （*1）
Transmitting and receiving network system
：IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX
IEEE802.3ab 1000BASE-T
Transmission speed ：10/100Mbps, full/half duplex
：1000Mbps, full duplex
Compatible cable ：Twisted pair cable
（At least equivalent to EIA/TIA568 category 5e）
Maximum transmission distance ：100m
Auto-Negotiation ：Communication speed and full/half duplex are
automatically recognized.
The setting can be fixed to 10Mbps, 100Mbps,
and full duplex or half duplex.
*1 Embedded power saving mode detects the connection status automatically
and saves power consumption to minimum.
SFP extension slot 15,16
SFF-8472（DMI：Diagnostic Monitoring Interface）
*Select either of RJ45 or SFP for use
Optional Accessories ：1000BASE-SX SFP Module （PN54021K-ID）
1000BASE-LX SFP Module （PN54023K-ID）
Switching method ：Store and Forward
Switching capacity ：32Gbps
Packet transfer capability ：Non-blocking
Max 1,488,000pps/port（1000Mbps）
Max 148,800pps/port（100Mbps）
Max 14,880pps/port（10Mbps）
MAC Address table ：Max 8K entry/unit
Buffer memory ：512K Byte/unit
Flow control ：half-duplex Back pressure
full-duplex IEEE802.3x
Aging timeout ：10 to 1,000,000 sec. (Default: 300 sec.)
Jumbo frame supported ：9KB
Transmittable frames ：EAP,BPDU
Console port ：RJ45 connector 1 port
Transmission mode ：RS-232C（ITU-TS V.24）
Emulation mode ：VT100
Communication configuration ：9,600bps, 8bit, None Parity control,
Stop bit 1 bit
Date issued
Date revised
July 12, 2016
Panasonic Life Solutions Networks Co., Ltd.
Oct. 1, 2020
Loading...