Panasonic KX-TGL462 Operating Instructions
TGL46x_QG(en).fm Page 1 Tuesday, November 10, 2015 2:51 PM
Model No. KX-TGL460/KX-TGL462
KX-TGL463
Quick Guide
Connections
Base unit
1
Connect the AC adaptor to the unit by pressing the plug firmly.
2
Fasten the cord by hooking it.
3
Connect the AC adaptor to the power outlet.
4 Connect the telephone line cord to the unit, then to the single-line telephone jack (RJ11C) until you hear a click.
5
A DSL/ADSL filter (not supplied) is required if you have a DSL/ADSL service.
Note:
L
Use only the supplied Panasonic AC adaptor PNLV226.
3
4
5
Charger
1 Connect the AC adaptor to the power outlet.
4
Printed in Vietnam
1
2
1
PNQW4847ZA TT1115WK0
1
1
2
TGL46x_QG(en).fm Page 2 Tuesday, November 10, 2015 2:51 PM
Battery installation/Battery charging
Charge for about 7 hours.
2
Note:
L USE ONLY rechargeable Ni-MH batteries AAA (R03) size
L Do NOT use alkaline/manganese/Ni-Cd batteries.
L Confirm correct polarities (S, T).
L Follow the directions on the display to set up the unit.
L Confirm “Charging” is displayed
()
.
Operating tips
Soft keys
By pressing a soft key, you can select the feature
shown directly above it on the display. Pay attention
to the display to see what functions the soft keys are assigned
during operation.
Volume key
Press
{+}
or
{-}
−
adjusting the ringer volume.
−
adjusting the receiver or speaker volume while talking.
Navigator key
− {^}, {V}, {<}, or {>}: Scroll through various lists and items.
− {^} (Mute): Put the call on mute.
− {<} k: View the phonebook entry.
−{>
}
(Redial/CID: Caller ID): View the redial list or caller list.
−
{V}
(Call Block): View the call block list.
repeatedly when:
().
{<}
{^}
{>}
{V}
– 2 –
TGL46x_QG(en).fm Page 3 Tuesday, November 10, 2015 2:51 PM
Date and time (Handset)
1 {MENU}(1)1
2 Enter the current month, date, and year. s {OK}
3 Enter the current hour and minute (12-hour clock format).
4 *: Select “AM” or “PM”. s {SAVE} s {OFF}
Recording your greeting message of the answering system for
the landline (Handset)
You can record your own greeting message instead of using a pre-recorded greeting message.
1 {MENU}(3)2 s {r}: “Yes” s {SELECT}
2 After a beep sounds, hold the handset about 20 cm (8 inches) away and speak clearly into
the microphone (2 minutes max.).
3 Press {STOP} to stop recording. s {OFF}
Link to cell
You can connect your base unit and cellular phone using Bluetooth® wireless technology, so that
you can make or answer cellular calls using your phone system. For more details, please visit our
Web site: http://shop.panasonic.com/bluetooth-phone
L Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit
during a cellular call, you may hear noise. For best performance, we recommend placing the
cellular phone between 0.6 m to 3 m (2 feet to 10 feet) away from the base unit.
1
2
1 Cell line
2 Cell phone service providers
Trademarks
L The Bluetooth
and any use of such marks by Panasonic Corporation is under license.
L All other trademarks identified herein are the property of their respective owners.
®
word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.,
– 3 –
Loading...