Panasonic KX-TG572SK, KX-TGF350, KX-TGF352, KX-TGF353 Operating Instruction

Operating Instructions
Digital Corded/Cordless Answering System
Model No.
KX-TGF350 KX-TGF352
KX-TG572SK
KX-TGF353
Model shown is KX-TGF350.
Before initial use, see “Getting Started” on page 8.
Thank you for purchasing a Panasonic product.
Please read these operating instructions before using the unit and save them for future reference.
Consulte “Guía Rápida Española”, página 57.
For assistance, visit our Web site: www.panasonic.com/support for customers in the U.S.A. or Puerto Rico.
Please register your product: www.panasonic.com/prodreg
TGF35x(en)_1205_ver041.pdf 1 2014/12/05 21:38:29
Introduction
Model composition ..............................................3
Accessory information ........................................3
Important Information
For your safety ....................................................5
Important safety instructions ...............................6
For best performance .........................................6
Other information ................................................6
Specifications ......................................................7
Getting Started
Setting up ............................................................8
Controls ............................................................11
Display icons .....................................................12
Language settings ............................................12
Date and time ...................................................13
Recording your greeting message ....................13
Other settings ...................................................13
Making/Answering Calls
Making calls ......................................................14
Answering calls .................................................15
Useful features during a call .............................15
Intercom
Intercom ............................................................18
Call Block
Using the MCALL BLOCKN button ....................19
Storing unwanted callers ..................................19
Phonebook
Phonebook ........................................................22
Speed dial .........................................................24
One-touch dial buttons ......................................25
Programming
Menu list ...........................................................27
Alarm ................................................................32
Silent mode .......................................................33
Baby monitor .....................................................33
Other programming ...........................................35
Registering a unit ..............................................36
Caller ID Service
Using Caller ID service .....................................37
Caller list ...........................................................37
Answering System
Answering system .............................................39
Turning the answering system on/off ................39
Greeting message ............................................39
Listening to messages ......................................40
Advanced new message alerting features ........41
Remote operation .............................................43
Answering system settings ...............................44
Useful Information
Voicemail service ..............................................46
Wall mounting ...................................................47
Error messages ................................................49
Troubleshooting ................................................49
FCC and other information ...............................54
Guía Rápida Española
Guía Rápida Española ......................................57
Appendix
Customer services ............................................61
Warranty (For United States and Puerto
Rico) .................................................................62
Index
Index..................................................................64
2

Table of Contents

TGF35x(en)_1205_ver041.pdf 2 2014/12/05 21:38:29

Model composition

Series Model No.
Base unit Handset
Part No. Part No. Quantity
KX-TGF350 series KX-TGF350 KX-TGF350 KX-TGFA30 1
KX-TGF352 KX-TGF350 KX-TGFA30 2
KX-TG572SK KX-TGF350 KX-TGFA30 2
KX-TGF353 KX-TGF350 KX-TGFA30 3

Accessory information

Supplied accessories
No. Accessory item/Part number
Quantity
KX-TGF350 KX-TGF352
KX-TG572SK
KX-TGF353
A AC adaptor/PNLV226Z 1 1 1 B
Telephone line cord
*1
1 1 1
C
Desk stand/Wall mounting adaptor
*2, *3
1 1 1
D
Corded handset
*4
1 1 1
E
Corded handset cord
*5
1 1 1
F
Rechargeable batteries
*6
2 4 6
G
Handset cover
*7, *8
1 2 3
H
Belt clip
*9
1 2 3
I
Charger
*10
1 2 3
*1 PQJA10075Z (Transparent cord), PQJA10075Y (Black cord) *2 The desk stand/wall mounting adaptor comes attached to the base unit. *3 PNKL1051Z2 (White), PNKL1051Z1 (Black) *4 PNLXP1012Y (Champagne gold), PNLXP1005Y (Metallic black) *5 PQJA212M (White), PQJA212V (Black) *6 See page 4 for replacement battery information. *7 The handset cover comes attached to the handset. *8 PNYNTGFA30NR (White), PNYNTGA680BR (Black) *9 PNKE1268Z3 (White), PNKE1268Z1 (Black) *10 PNLC1040ZN (Champagne gold), PNLC1040ZB (Black)
A
B C D E
F G H I
For assistance, please visit www.panasonic.com/support
3

Introduction

TGF35x(en)_1205_ver041.pdf 3 2014/12/05 21:38:29
Additional/replacement accessories
Please contact your nearest Panasonic dealer for sales information (page 61).
Accessory item Model number/Specifications
Rechargeable batteries
HHR-4DPA
*1
R To order, please visit
www.panasonic.com/batterystore
Battery type: – Nickel metal hydride (Ni-MH) – 2 x AAA (R03) size for each handset
Headset KX-TCA60, KX-TCA93, KX-TCA400, KX-TCA430
T-adaptor KX-J66
Range extender
KX-TGA405
*2
Key detector
KX-TGA20
*3
*1 Replacement batteries may have a different capacity from that of the supplied batteries. *2 By installing this unit, you can extend the range of your phone system to include areas where
reception was previously not available. This product can be purchased online. Please visit our Web site: www.panasonic.com/RangeExtender
*3 By registering the key detector (4 max.) to a Panasonic Digital Cordless Phone and attaching it to an
easy-to-lose item in advance, you can locate and find the mislaid item to which the key detector is attached. Please visit our Web site: www.panasonic.net/pcc/products/telephone/p/tga20/
Other information
R Design and specifications are subject to change without notice. R The illustrations in these instructions may vary slightly from the actual product.
Expanding your phone system
Handset (optional): KX-TGFA30
You can expand your phone system by registering optional handsets (6 max.) to a single base unit. R Optional handsets may be a different color from that of
the supplied handsets.
4
For assistance, please visit www.panasonic.com/support
Introduction
TGF35x(en)_1205_ver041.pdf 4 2014/12/05 21:38:29

For your safety

To prevent severe injury and loss of life/property, read this section carefully before using the product to ensure proper and safe operation of your product.
WARNING
Power connection
R Use only the power source marked on the product. R Do not overload power outlets and extension cords.
This can result in the risk of fire or electric shock.
R Completely insert the AC adaptor/power plug into the
power outlet. Failure to do so may cause electric shock and/or excessive heat resulting in a fire.
R Regularly remove any dust, etc. from the AC adaptor/
power plug by pulling it from the power outlet, then wiping with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc. resulting in a fire.
R Unplug the product from power outlets if it emits
smoke, an abnormal smell, or makes an unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped emitting and contact us at www.panasonic.com/contactinfo
R Unplug from power outlets and never touch the inside
of the product if its casing has been broken open.
R Never touch the plug with wet hands. Danger of
electric shock exists.
Installation
R To prevent the risk of fire or electrical shock, do not
expose the product to rain or any type of moisture.
R Do not place or use this product near automatically
controlled devices such as automatic doors and fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident.
R Do not allow the AC adaptor or telephone line cord to
be excessively pulled, bent or placed under heavy objects.
Operating safeguards
R Unplug the product from power outlets before cleaning.
Do not use liquid or aerosol cleaners.
R Do not disassemble the product. R Do not spill liquids (detergents, cleansers, etc.) onto
the telephone line cord plug, or allow it to become wet at all. This may cause a fire. If the telephone line cord plug becomes wet, immediately pull it from the telephone wall jack, and do not use.
R Do not excessively pull the corded handset cord from
the base unit. This may cause the base unit to fall, resulting in injury.
Medical
R Consult the manufacturer of any personal medical
devices, such as pacemakers or hearing aids, to determine if they are adequately shielded from external RF (radio frequency) energy. (The product operates in
the frequency range of 1.92 GHz to 1.93 GHz, and the RF transmission power is 115 mW (max.).)
R Do not use the product in health care facilities if any
regulations posted in the area instruct you not to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
CAUTION
Installation and location
R Never install telephone wiring during an electrical
storm.
R Never install telephone line jacks in wet locations
unless the jack is specifically designed for wet locations.
R Never touch uninsulated telephone wires or terminals
unless the telephone line has been disconnected at the network interface.
R Use caution when installing or modifying telephone
lines.
R The AC adaptor is used as the main disconnect device.
Ensure that the AC outlet is installed near the product and is easily accessible.
R This cordless handset is unable to make calls when:
– the handset batteries need recharging or have failed. – there is a power failure.
Ni-MH rechargeable batteries
R We recommend using the batteries noted on page 4.
USE ONLY rechargeable Ni-MH batteries AAA (R03) size.
R Do not mix old and new batteries. R Do not open or mutilate the batteries. Released
electrolyte from the batteries is corrosive and may cause burns or injury to the eyes or skin. The electrolyte is toxic and may be harmful if swallowed.
R Exercise care when handling the batteries. Do not
allow conductive materials such as rings, bracelets, or keys to touch the batteries, otherwise a short circuit may cause the batteries and/or the conductive material to overheat and cause burns.
R Charge the batteries provided with or identified for use
with this product only, in accordance with the instructions and limitations specified in this manual.
R Only use a compatible base unit (or charger) to charge
the batteries. Do not tamper with the base unit (or charger). Failure to follow these instructions may cause the batteries to swell or explode.
Attention:
A nickel metal hydride battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY (1-800-822-8837) for information on how to recycle this battery.
For assistance, please visit www.panasonic.com/support
5

Important Information

TGF35x(en)_1205_ver041.pdf 5 2014/12/05 21:38:29
Note when using alkaline batteries for power backup
R The batteries should be used correctly, otherwise the
unit may be damaged due to battery leakage.
R Do not charge, short-circuit, disassemble, or heat the
batteries.
R Do not dispose of batteries in a fire. R Remove all the batteries when replacing. R Do not mix old, new or different types of batteries. R It is recommended that batteries are replaced annually. R It is recommended that batteries are replaced after a
power outage.

Important safety instructions

When using your product, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
1. Do not use this product near water for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement or near a swimming pool.
2. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.
3. Do not use the telephone to report a gas leak in the vicinity of the leak.
4. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions.
SAVE THESE INSTRUCTIONS

For best performance

Base unit location/avoiding noise
The base unit and other compatible Panasonic units use radio waves to communicate with each other. R For maximum coverage and noise-free
communications, place your base unit: – at a convenient, high, and central location with no
obstructions between the cordless handset and base unit in an indoor environment.
– away from electronic appliances such as TVs,
radios, personal computers, wireless devices, or other phones.
– facing away from radio frequency transmitters, such
as external antennas of mobile phone cell stations. (Avoid putting the base unit on a bay window or near a window.)
R Coverage and voice quality depends on the local
environmental conditions.
R If the reception for a base unit location is not
satisfactory, move the base unit to another location for better reception.
Environment
R Keep the product away from electrical noise generating
devices, such as fluorescent lamps and motors.
R The product should be kept free from excessive
smoke, dust, high temperature, and vibration.
R The product should not be exposed to direct sunlight.
R Do not place heavy objects on top of the product. R When you leave the product unused for a long period
of time, unplug the product from the power outlet.
R The product should be kept away from heat sources
such as heaters, kitchen stoves, etc. It should not be placed in rooms where the temperature is less than 0 °C (32 °F) or greater than 40 °C (104 °F). Damp basements should also be avoided.
R The maximum calling distance may be shortened when
the product is used in the following places: Near obstacles such as hills, tunnels, underground, near metal objects such as wire fences, etc.
R Operating the product near electrical appliances may
cause interference. Move away from the electrical appliances.
Routine care R Wipe the outer surface of the product with a soft
moist cloth.
R Do not use benzine, thinner, or any abrasive powder.

Other information

CAUTION: Risk of explosion if battery is replaced by an
incorrect type. Dispose of used batteries according to the instructions.
Notice for product disposal, transfer, or return
R This product can store your private/confidential
information. To protect your privacy/confidentiality, we recommend that you erase information such as phonebook or caller list entries from the memory before you dispose of, transfer, or return the product.
Notice
6
For assistance, please visit www.panasonic.com/support
Important Information
TGF35x(en)_1205_ver041.pdf 6 2014/12/05 21:38:29

Specifications

R Standard:
DECT 6.0 (Digital Enhanced Cordless Telecommunications 6.0)
R Frequency range:
1.92 GHz to 1.93 GHz
R RF transmission power:
115 mW (max.)
R Power source:
120 V AC, 60 Hz
R Power consumption:
Base unit:
Standby: Approx. 0.7 W Maximum: Approx. 3.0 W
Charger:
Standby: Approx. 0.1 W Maximum: Approx. 1.8 W
R Operating conditions:
0 °C – 40 °C (32 °F – 104 °F), 20 % – 80 % relative air humidity (dry)
For assistance, please visit www.panasonic.com/support
7
Important Information
TGF35x(en)_1205_ver041.pdf 7 2014/12/05 21:38:29

Setting up

Connections
n Base unit
Connect the AC adaptor to the unit by pressing the plug firmly. Connect the telephone line cord to the unit until you hear a click. Fasten the AC adaptor cord and the telephone line cord by hooking it. Connect the AC adaptor to the power outlet. Connect the telephone line cord to the single-line telephone jack (RJ11C) until you hear a click. A DSL/ADSL filter (not supplied) is required if you have a DSL/ADSL service. Connect the corded handset cord to the corded handset and the base unit until you hear a click.
7
7
1
4 6
5
1
2
3 3
3
Note:
R Use only the supplied Panasonic AC adaptor
PNLV226.
R Follow the directions on the display to set up
the unit.
n Charger
Connect the AC adaptor to the power outlet.
1
Handset battery installation
R USE ONLY rechargeable Ni-MH batteries AAA
(R03) size (
1
).
R Do NOT use alkaline/manganese/Ni-Cd
batteries.
R Confirm correct polarities (
, ).
1
R Follow the directions on the display to set up
the unit.
8
For assistance, please visit www.panasonic.com/support

Getting Started

TGF35x(en)_1205_ver041.pdf 8 2014/12/05 21:38:30
Handset battery charging
Charge for about 7 hours. R Confirm Charging” is displayed (
1
).
R When the batteries are fully charged, “Fully
charged is displayed.
1
Handset battery level
Icon Battery level
High
Medium
Low
Needs charging.
Empty
Panasonic Ni-MH battery performance (supplied batteries)
Operation Operating time
In continuous use
13 hours max.
*1
Not in use (standby)
12 days max.
*1
*1 If eco mode is on.
Note:
R Actual battery performance depends on usage
and ambient environment.
Base unit battery installation (for power backup)
You can insert 2 AAA (R03) batteries (not supplied) into the base unit that will power the unit temporarily in the event of a power failure.
Important:
R The following batteries can be used with the
base unit: – Rechargeable Ni-MH batteries
*1, *2
(including
the batteries used in your handset(s))
– Standard (non-rechargeable) alkaline
batteries
*3
R Do NOT use manganese batteries. R Confirm correct polarities ( , ).
*1 The base unit can fully charge Ni-MH batteries
in about 15 hours.
*2 We recommend using HHR-4DPA batteries
(page 4).
*3 Only insert alkaline batteries once a power
failure occurs. Remove the alkaline batteries when power is restored.
1 Disconnect the telephone line cord (A). 2 Open the battery cover (B). 3 Install the batteries in the battery compartment
(C).
4 Close the cover, then reconnect the telephone
line cord (D).
B
C
D
A
Note:
R If your phone service provider requires
additional devices in order to make and receive calls, such as a modem, you may still not be able to make and receive calls even if the base unit’s backup power feature is functioning.
Base unit battery status when a power failure occurs
Icon Battery status
Power backup mode is on.
Battery power is low.
*1
For assistance, please visit www.panasonic.com/support
9
Getting Started
TGF35x(en)_1205_ver041.pdf 9 2014/12/05 21:38:30
*1
If
begins flashing on the base unit, replace the batteries with new ones as soon as possible. If you replace Ni-MH batteries with alkaline batteries, insert the Ni-MH batteries into the base unit again after the power is restored so that they will be recharged.
Battery saving mode setting
This feature allows the base unit to reduce its power consumption by limiting the available functions and therefore extend battery life during a power failure. The following settings are available: – On: The unit will work as a standard
telephone. Only the corded handset can be used to make and receive calls. (You cannot use the base unit display, phonebook, one-touch dial, answering system, speakerphone, etc.) The base unit display is blank.
Off (default): You can use the full functions
of the base unit, but battery life is not extended. The brightness level for the base unit display is lowered.
Base unit
1 MMENUN#150 2 M
bN: Select the desired setting.
3 MSAVEN a MEXITN
Note:
R Once the battery saving mode is set to On,
the unit rings with the volume level 1 even if the ringer volume for the base unit is set to Off” to let you know an incoming call is being received.
Panasonic Ni-MH battery performance (optional batteries) when operating on backup battery power
Operation
Saving mode
Off On
In continuous use 2 hours
max.
7 hours max.
Not in use (standby) 3 hours
max.
8 hours max.
Note:
R Battery performance depends on the type of
batteries.
R Actual battery performance depends on usage
and ambient environment.
Note when setting up
Note for connections
R The AC adaptor must remain connected at all
times. (It is normal for the adaptor to feel warm during use.)
R The AC adaptor should be connected to a
vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected.
Note for Ni-MH battery installation
R Handset: Use the supplied rechargeable
batteries.
R Handset/Base unit: For replacement, we
recommend using the Panasonic rechargeable batteries noted on page 4, 5.
Note for battery charging
R It is normal for the handset to feel warm during
charging.
R Clean the charge contacts of the handset, base
unit, and charger with a soft and dry cloth once a month. Before cleaning the unit, disconnect from power outlets and any telephone line cords. Clean more often if the unit is exposed to grease, dust, or high humidity.
Intelligent eco mode
This feature automatically reduces handset power consumption by suppressing handset transmission power when the handset is close to the base unit. R When this feature is activated,
is displayed.
R Eco mode is turned off when the clarity booster
is activated (page 16).
10
For assistance, please visit www.panasonic.com/support
Getting Started
TGF35x(en)_1205_ver041.pdf 10 2014/12/05 21:38:30

Controls

Handset
I
K
L
H
M
E
D
C
F
G
B
A
J
Belt clip holes Speaker M N (TALK) Headset jack Dial keypad (*: TONE) MZN (SP-PHONE: Speakerphone) Microphone Receiver Display
MOFFN MFLASHN MCALL WAITN MCALL BLOCKN
Charge contacts
n Control type
Soft keys By pressing a soft key, you can select the feature shown directly above it on the display.
Navigator keyMDN, MCN, MFN, or MEN: Scroll through various
lists and items.
– VOL. (Volume: MDN or MCN): Adjust the
receiver or speaker volume while talking.
MFN : View the phonebook entry. – MEN REDIAL: View the redial list. – MCN CID (Caller ID): View the caller list.
Base unit
A
G H I
EA B DC
F
F
U
N
L
B
P
R
S T
K
M
J
O
Corded handset Receiver Speaker Display
R The display can be moved back and forth to
select the desired angle.
ONE-TOUCH DIAL buttons Microphone
MSPEED DIALN MFLASHN MCALL WAITN MHOLDN MLOCATORN MINTERCOMN R You can locate a misplaced handset by
pressing MLOCATORN.
Dial keypad (*: TONE)
MEXITN MREDIALN MPAUSEN MMUTEN MZN (SP-PHONE: Speakerphone)
SP-PHONE indicator
MCALL LOGN R You can access the caller list/redial list by
pressing MCALL LOGN.
For assistance, please visit www.panasonic.com/support
11
Getting Started
TGF35x(en)_1205_ver041.pdf 11 2014/12/05 21:38:30
MCALL BLOCKN M N (ANSWER ON/OFF)
ANSWER ON/OFF indicator
MERASEN M N (PLAY/STOP)
Message indicator Desk stand/Wall mounting adaptor
R The adaptor is a removable attachment for
desk stand or wall mounting use (page 47).
n Control type
Soft keys
By pressing a soft key, you can select the feature shown directly above it on the display.
Navigator key
– M
DN, MCN, M N, or M N: Scroll through
various lists and items. – VOL. (Volume: MDN or MCN): Adjust the
receiver or speaker volume while talking. – M N/M N: Repeat/skip messages during
playback.

Display icons

Handset display items
Item Meaning
Within base unit range
Out of base unit range
The line is in use. R When flashing:
The call is put on hold.
R When flashing rapidly: An
incoming call is now being received.
Eco mode is on. (page 10)
Noise reduction is set. (page 16)
Equalizer is set. (page 16)
Z Speakerphone is on. (page 14)
Ringer volume is off. (page 29)
Silent mode is on. (page 33)
Call sharing mode is off. (page 31)
Alarm is on. (page 32)
Handset number
Battery level
Item Meaning
Blocked call (page 19)
Clarity booster is on. (page 16)
Baby monitor is activated. The name/number displayed next to the icon indicates the monitoring unit. (page 33)
In use
Answering system is being used by another handset or the base unit.
Line in use
Someone is using the line.
Base unit display items
Item Meaning
The line is in use. R When flashing:
The call is put on hold.
R When flashing rapidly: An
incoming call is now being received.
Ringer volume is off. (page 29)
Silent mode is on. (page 33)
Call sharing mode is off. (page 31)
Greeting only” is selected. Caller messages are not recorded. (page 45)
Power backup mode is on. (page 9)
Blocked call (page 19)
In use
Answering system is being used by the handset.
Line in use
Someone is using the line.

Language settings

Display language
You can select either English” or “Español as the display language. The default setting is
English”.
Handset / Base unit
1 MMENUN#110 2 M
bN: Select the desired setting. a MSAVEN
12
For assistance, please visit www.panasonic.com/support
Getting Started
TGF35x(en)_1205_ver041.pdf 12 2014/12/05 21:38:30
3 Proceed with the operation for your unit.
Handset: MOFFN Base unit: MEXITN
Voice guidance language
You can select either English” or “Español as the voice guidance language of the answering system. The default setting is English”. You can configure this setting using either the base unit or one of the handsets.
Handset / Base unit
1 MMENUN#112 2 M
bN: Select the desired setting. a MSAVEN
3 Proceed with the operation for your unit.
Handset: MOFFN Base unit: MEXITN

Date and time

You can configure this setting using either the base unit or one of the handsets.
Handset / Base unit
1 MMENUN#101 2 Enter the current month, date, and year by
selecting 2 digits for each. Example: July 12, 2015 07 12 15
3 MOKN 4 Enter the current hour and minute (12-hour
clock format) by selecting 2 digits for each. Example: 9:30 09 30
5 Proceed with the operation for your unit.
Handset: *: Select “AM” or “PM”. Base unit: MAM/PMN: Select “AM” or “PM”.
6 MSAVEN 7 Proceed with the operation for your unit.
Handset: MOFFN Base unit: MEXITN
Note:
R When English is selected as the display
language, 12-hour clock format is used. When Spanish is selected, 24-hour clock format is used.

Recording your greeting message

You can record your own greeting message instead of using a pre-recorded greeting message. See page 39 for details. You can configure this setting using either the base unit or one of the handsets.
Handset / Base unit
1 MMENUN#302 2 M
bN: “Yes a MSELECTN
3 Record a greeting message. a MSTOPN 4 Proceed with the operation for your unit.
Handset: MOFFN Base unit: MEXITN

Other settings

Dialing mode
If you cannot make calls, change this setting according to your telephone line service. The default setting is Tone”.
Tone: For tone dial service.Pulse: For rotary/pulse dial service.
You can configure this setting using either the base unit or one of the handsets.
Handset / Base unit
1 MMENUN#120 2 M
bN: Select the desired setting. a MSAVEN
3 Proceed with the operation for your unit.
Handset: MOFFN Base unit: MEXITN
For assistance, please visit www.panasonic.com/support
13
Getting Started
TGF35x(en)_1205_ver041.pdf 13 2014/12/05 21:38:30

Making calls

Using the handset
1 Lift the handset and dial the phone number.
R To correct a digit, press MCLEARN.
2 M
N
3 When you finish talking, press MOFFN or place
the handset on the charger.
Using the speakerphone
1 Dial the phone number and press M
ZN.
2 When you finish talking, press MOFFN.
Note:
R To switch back to the receiver, press M
ZN/M
N.
Making a call using the redial list
The last 5 phone numbers dialed are stored in the redial list (each 48 digits max.).
1 M
EN REDIAL
2 M
bN: Select the desired phone number.
3 M
N
Erasing a number in the redial list
1 M
EN REDIAL
2 M
bN: Select the desired phone number. a
MERASEN
3 M
bN: “Yes a MSELECTN
4 MOFFN
Using the base unit
1 Dial the phone number.
R To correct a digit, press MCLEARN.
2 Lift the corded handset. 3 When you finish talking, place the corded
handset on the cradle.
Note:
R You can also dial the phone number after lifting
the corded handset.
R While on a call, you can switch from the base
unit to the cordless handset as follows. The call sharing mode must be on (page 31).
A Handset: Press M
N.
B Base unit: Place the corded handset on the cradle. When the speakerphone is used, press MZN.
Using the speakerphone
1 During a conversation with the corded
handset, press M
ZN to turn on the
speakerphone. R You can place the corded handset on the
cradle.
R Speak into the base unit microphone.
2 When you finish talking, press M
ZN.
Note:
R To switch to the receiver, lift the corded handset.
Making a call using the redial list
The last 10 phone numbers dialed are stored in the redial list (each 48 digits max.).
1 MREDIALN 2 M
bN: Select the desired phone number.
3 Lift the corded handset.
Note:
R In step 1, you can also access the redial list as
follows:
MCALL LOGN a M
bN: Outgoing call a
MSELECTN
Erasing a number in the redial list
1 MREDIALN 2 M
bN: Select the desired phone number. a
MERASEN
3 M
bN: “Yes a MSELECTN
4 MEXITN
Adjusting the receiver or speaker volume
Handset / Base unit
Press M
DN or MCN repeatedly while talking.
Pause (for PBX/long distance service users)
A pause is sometimes required when making calls using a PBX or long distance service. When storing a calling card access number and/or PIN in the phonebook, a pause is also needed (page 24).
14
For assistance, please visit www.panasonic.com/support

Making/Answering Calls

TGF35x(en)_1205_ver041.pdf 14 2014/12/05 21:38:30
Example: If you need to dial the line access number “9” when making outside calls with a PBX:
Handset
1 9 a M
DN (Pause)
2 Dial the phone number. a M
N
Base unit
1 9 a MPAUSEN 2 Dial the phone number. 3 Lift the corded handset.
Note for handset and base unit:
R A 3.5 second pause is inserted each time you
press M
DN (Pause) on the handset or MPAUSEN
on the base unit.

Answering calls

Using the handset
1 Lift the handset and press M
N or MZN when
the unit rings.
2 When you finish talking, press MOFFN or place
the handset on the charger. Any key answer: You can answer the call by pressing any dial key. Auto talk: You can answer calls simply by lifting the handset (page 30). Temporary ringer off: You can turn the ringer off temporarily by pressing M
N.
Using the base unit
1 Lift the corded handset or press M
ZN when the
unit rings.
2 When you finish talking, place the corded
handset on the cradle. When the
speakerphone is used, press M
ZN.
Temporary ringer off: You can turn the ringer off temporarily by pressing M
N.
Adjusting the ringer volume
Handset / Base unit
Press M
DN or MCN repeatedly to select the desired
volume while ringing.

Useful features during a call

Hold
Handset
1 Press MMENUN during an outside call. 2 M
bN: “Hold” a MSELECTN
3 To release hold, press M
N.
R Another handset user can take the call by
pressing M
N.
R The base unit user can take the call by
lifting the corded handset.
Base unit
1 Press MHOLDN during an outside call.
R If you are using the corded handset, you
can place it on the cradle.
2 To release hold, lift the corded handset.
R A handset user can take the call by
pressing M
N.
Note for handset and base unit:
R While an outside call is on hold, the SP-PHONE
indicator flashes.
R After holding for 10 minutes, the call is
disconnected.
Mute
Handset / Base unit
1 Press MMUTEN during a call. 2 To return to the call, press MMUTEN.
Note:
R MMUTEN is a soft key visible on the display
during a call.
Flash
Handset / Base unit
MFLASHN allows you to use the special features of your host PBX such as transferring an extension call, or accessing optional telephone services.
Note:
R To change the flash time, see page 31.
For assistance, please visit www.panasonic.com/support
15
Making/Answering Calls
TGF35x(en)_1205_ver041.pdf 15 2014/12/05 21:38:30
For call waiting or Call Waiting Caller ID service users
To use call waiting or Call Waiting Caller ID, you must first subscribe with your phone service provider. This feature allows you to receive calls while you are already talking on the phone. If you receive a call while on the phone, you will hear a call waiting tone.
If you subscribe to both Caller ID and Call Waiting with Caller ID services, the 2nd caller’s
information is displayed on the handset or base unit that is in use after you hear the call waiting tone.
Handset / Base unit
1 Press MCALL WAITN to answer the 2nd call. 2 To switch between calls, press MCALL WAITN.
Note:
R Please contact your phone service provider for
details and availability of this service in your area.
Temporary tone dialing (for rotary/ pulse service users)
Handset / Base unit
Press * (TONE) before entering access numbers which require tone dialing.
Handset clarity booster
This feature can improve sound clarity when the handset is used in an area where there may be interference. During an outside call, this feature is turned on automatically when necessary. R When this feature is turned on,
is
displayed.
Handset noise reduction
This feature allows you to hear the voice of the person you are talking to more clearly, by reducing the surrounding noise coming from the other party’s telephone.
1 Press MMENUN while talking. 2 M
bN: “Noise reduction on or “Noise
reduction offa MSELECTN
Note:
R Depending on the environment where this
handset is being used, this feature may not be effective.
R This feature is not available while using the
speakerphone.
Handset equalizer
This feature clarifies the voice of the person you are talking to, producing a more natural-sounding voice that is easier to hear and understand.
1 Press MMENUN while talking. 2 MbN: “Equalizer” a MSELECTN 3 M
bN: Select the desired setting.
4 Press MOKN to exit.
Note:
R Depending on the condition and quality of your
telephone line, this feature may emphasize existing line noise. If it becomes difficult to hear, turn this feature off.
R This feature is not available while using the
speakerphone.
R When both the Equalizer” setting and noise
reduction are activated,
is shown on the
display.
Call share
You can join an existing outside call.
Handset
To join the conversation, press M N when the other unit is on an outside call.
Base unit
To join the conversation, lift the corded handset when the handset is on an outside call.
Note for handset and base unit:
R A maximum of 3 parties (including 1 outside
party) can join a conversation. (3-way
conference)
R To prevent other users from joining your
conversations with outside callers, turn call sharing mode off (page 31).
Transferring calls, conference calls
Outside calls can be transferred or a conference call with an outside party can be made:
16
For assistance, please visit www.panasonic.com/support
Making/Answering Calls
TGF35x(en)_1205_ver041.pdf 16 2014/12/05 21:38:30
– between 2 handsets – between a handset and the base unit
Handset
1 During an outside call, press MMENUN. 2 M
bN: “Intercom” a MSELECTN
3 M
bN: Select the desired unit. a MSELECTN
4 Wait for the paged party to answer.
R If the paged party does not answer, press
MBACKN to return to the outside call.
5 To complete the transfer:
Press MOFFN.
To establish a conference call:
MMENUN a MbN: Conference” a
MSELECTN
R To leave the conference, press MOFFN. The
other 2 parties can continue the conversation.
R To put the outside call on hold: MMENUN a
M
bN: Hold” a MSELECTN To resume the conference: MMENUN a M
bN: Conference a MSELECTN
R To cancel the conference: MMENUN a M
bN:
Stop conferencea MSELECTN You can continue the conversation with the outside caller.
Base unit
1 During an outside call, press MINTERCOMN.
When 2 or more handsets are registered:
M
bN: Select the desired unit. a MSELECTN
R To page all handsets, press 0 or wait for a
few seconds.
2 Wait for the paged party to answer.
R If paged party does not answer, press
MINTERCOMN to return to the outside call.
3 To complete the transfer:
Place the corded handset on the cradle. R The outside call is being routed to the
handset.
To establish a conference call:
Press MCONFN. R To leave the conference, place the corded
handset on the cradle. The other 2 parties can continue the conversation.
R To put the outside call on hold, press
MHOLDN. To resume the conference, press MCONFN.
For assistance, please visit www.panasonic.com/support
17
Making/Answering Calls
TGF35x(en)_1205_ver041.pdf 17 2014/12/05 21:38:30

Intercom

Intercom calls can be made: – between handsets – between a handset and the base unit
Note:
R When paging unit(s), the paged unit(s) beeps
for 1 minute.
R If you receive an outside call while talking on the
intercom, the interrupt tone sounds. – Handset: To finish intercom, press MOFFN.
To answer the call, press M
N.
Base unit: To finish intercom, place the
corded handset on the cradle. If the speakerphone is used, press M
ZN. To answer
the call, lift the corded handset. If the speakerphone is used, press MZN.
Making an intercom call
Handset
1 MMENUN a M
bN: “Intercom” a MSELECTN
2 M
bN: Select the desired unit. a MSELECTN
3 When you finish talking, press MOFFN.
Note:
R You can also use the MINTERCOMN soft key, if
displayed, to make intercom calls.
Base unit
1 Press MINTERCOMN.
When 2 or more handsets are registered:
M
bN: Select the desired unit. a MSELECTN
R To page all handsets, press 0 or wait for a
few seconds.
R Lift the corded handset if needed.
2 When you finish talking, press M
ZN or place
the corded handset on the cradle.
Answering an intercom call
Handset
1 Press M
N to answer the page.
2 When you finish talking, press MOFFN.
Base unit
1 Press M
ZN or lift the corded handset to answer
the page.
2 When you finish talking, press MZN or place
the corded handset on the cradle.
Turning auto intercom on/off
This feature allows the handset and base unit to answer intercom calls automatically when it is called. You do not need to press M
N, lift the
corded handset, or press M
ZN. When this feature
is set to On, the monitoring handset or base unit for the baby monitor feature (page 35) will also answer baby monitor calls automatically. The default setting is Off”.
Handset / Base unit
1 MMENUN#273 2 M
bN: Select the desired setting. a MSAVEN
3 Proceed with the operation for your unit.
Handset: MOFFN Base unit: MEXITN
18
For assistance, please visit www.panasonic.com/support

Intercom

TGF35x(en)_1205_ver041.pdf 18 2014/12/05 21:38:30
Using the MCALL BLOCKN button
You can press the MCALL BLOCKN button in the following situations to disconnect the current call and add a phone number to the call block list: – when an incoming call is being received – when an incoming call is being recorded by the
answering system – when talking on an outside call Once a phone number has been added to the call block list, the unit will block calls from that phone number in the future.
Handset / Base unit
1 Press MCALL BLOCKN under the situations
shown above.
2 Confirm the call block number and press
MYESN. R The call block number is stored in the call
block list, Caller blocked” is displayed, and then the call is disconnected.
Note:
R If the call has no phone number, the call is
blocked but it is not stored in the call block list. R The call block feature is not available for
intercom calls or calls received by call waiting. R Blocked calls are logged in the caller list.

Storing unwanted callers

The unit can block calls by storing the desired items in the call block list beforehand (Caller ID subscribers only). – Block a single number”: The unit blocks
calls from specific phone numbers stored in the
call block list. – Block range of numbers”: The unit
blocks calls that begin with a number stored in
the call block list, such as a toll-free phone
number prefix or certain area codes. – Block unknown CID”: The unit blocks calls
that have no phone number. Single phone numbers and ranges of numbers can be stored in the call block list up to 250 items in total.
Blocking unwanted callers:
When a call is received, the unit rings briefly
*1
while caller information is being received.
If the caller’s phone number matches an entry in the call block list, the unit emits no sound to the caller, and disconnects the call. *1 If you do not want this one ring to sound,
select No” in “Setting not to ring once for blocked call” (page 20).
Storing a single phone number
Important:
R We recommend storing 10 digits (including the
area code). If only 7 digits are stored, all numbers that have the same last 7 digits will be blocked.
Adding call blocked numbers from the caller list
Handset
1 M
CN CID
2 M
bN: Select the entry to be blocked.
R To edit the number: MMENUN a MbN:
Edit a MSELECTN Press MEDITN repeatedly until the phone number is shown in the 10-digit format. a
MSAVEN a M
bN: Call block a
MSELECTN a Go to step 4.
3 MCALL BLOCKN 4 M
bN: “Yes a MSELECTN
5 Edit the phone number if necessary (24 digits
max.).
6 MSAVEN a MOFFN
Base unit
1 MCIDN 2 M
bN: Select the entry to be blocked.
R To edit the number: Press MEDITN
repeatedly until the phone number is shown in the 10-digit format.
3 MCALL BLOCKN 4 MbN: “Yes” a MSELECTN 5 Edit the phone number if necessary (24 digits
max.).
6 MSAVEN a MEXITN
Adding call blocked numbers manually
Handset
1 MCALL BLOCKN
For assistance, please visit www.panasonic.com/support
19

Call Block

TGF35x(en)_1205_ver041.pdf 19 2014/12/05 21:38:30
2 MbN: Block a single number a
MSELECTN
3 MMENUN a M
bN: Add a MSELECTN
4 Enter the phone number (24 digits max.). 5 MSAVEN a MOFFN
Base unit
1 MCALL BLOCKN 2 M
bN: Block a single number a
MSELECTN a MADDN
3 Enter the phone number (24 digits max.). 4 MSAVEN a MEXITN
Storing a range of number
Handset
1 MCALL BLOCKN 2 M
bN: Block range of numbers a
MSELECTN
3 MMENUN a M
bN: Add a MSELECTN
4 Enter the desired number (2-8 digits). 5 MSAVEN a MOFFN
Base unit
1 MCALL BLOCKN 2 M
bN: Block range of numbers a
MSELECTN
3 MADDN 4 Enter the desired number (2-8 digits). 5 MSAVEN a MEXITN
Blocking incoming calls that have no phone number
You can block calls when no phone number is provided, such as private callers or out of area calls.
Handset / Base unit
1 MCALL BLOCKN 2 M
bN: “Block unknown CID” a MSELECTN
3 M
bN: Select the desired setting. a MSAVEN
4 Proceed with the operation for your unit.
Handset: MOFFN Base unit: MEXITN
Setting not to ring once for blocked call
If you do not want the unit to sound one ring for calls from phone numbers stored in the call block list, select No. The default setting is Yes”.
Handset / Base unit
1 MCALL BLOCKN 2 M
bN: One ring for blocked call a
MSELECTN
3 M
bN: Select the desired setting. a MSAVEN
4 Proceed with the operation for your unit.
Handset: MOFFN Base unit: MEXITN
Viewing/editing/erasing call block numbers
Handset
1 MCALL BLOCKN 2 M
bN: “Block a single number or Block
range of numbersa MSELECTN
3 MbN: Select the desired entry.
R After viewing, press MOFFN to exit.
4 To edit a number:
MEDITN a Edit the number. a MSAVEN a MOFFN
To erase a number:
MERASEN a M
bN: Yes” a MSELECTN a
MOFFN
Base unit
1 MCALL BLOCKN 2 M
bN: “Block a single number or Block
range of numbersa MSELECTN
3 MbN: Select the desired entry.
R After viewing, press MEXITN to exit.
4 To edit a number:
MEDITN a Edit the number. a MSAVEN a MEXITN
To erase a number:
MERASEN a M
bN: Yes” a MSELECTN a
MEXITN
Note:
R When editing, press the desired dial key to add
digits and press MCLEARN to erase digits.
20
For assistance, please visit www.panasonic.com/support
Call Block
TGF35x(en)_1205_ver041.pdf 20 2014/12/05 21:38:31
Erasing all call block numbers
Handset / Base unit
1 MCALL BLOCKN 2 M
bN: “Block a single number or Block
range of numbersa MSELECTN
3 Proceed with the operation for your unit.
Handset: MMENUN a MbN: “Erase all” a MSELECTN Base unit: MERASEN
4 M
bN: “Yes a MSELECTN
5 M
bN: “Yes a MSELECTN
6 Proceed with the operation for your unit.
Handset: MOFFN Base unit: MEXITN
For assistance, please visit www.panasonic.com/support
21
Call Block
TGF35x(en)_1205_ver041.pdf 21 2014/12/05 21:38:31
Loading...
+ 47 hidden pages