Panasonic KX-TGF340, KX-TGF342, KX-TGF343, KX-TGF344, KX-TGF345 Operating Instruction
Operating Instructions
Digital Cordless Answering System
Model No.
KX-TGF340
KX-TGF342
KX-TGF343
KX-TGF344
KX-TGF345
Model shown is KX-TGF340.
Before initial use, see “Getting Started”
on page 9.
Thank you for purchasing a Panasonic product.
Please read these operating instructions before using the unit and save them for
future reference.
Consulte “Guía Rápida Española”, página 62.
For assistance, visit our Web site: www.panasonic.com/support for customers in
the U.S.A. or Puerto Rico.
Please register your product: www.panasonic.com/prodreg
TGF34x_en_1201_ver043.pdf 1 2014/12/01 16:22:15
Introduction
Model composition .......................................3
Accessory information ..................................3
Important Information
For your safety .............................................5
Important safety instructions ........................6
For best performance ...................................6
Other information .........................................7
Specifications ...............................................8
Getting Started
Setting up .....................................................9
Controls ......................................................11
Display icons ..............................................12
Language settings ......................................13
Date and time .............................................13
Recording your greeting message .............14
Other settings .............................................14
Making/Answering Calls
Making calls ...............................................15
Answering calls ..........................................16
Useful features during a call
.......................16
Intercom .....................................................18
Power backup operation ............................19
Call Block
Using the MCALL BLOCKN button .............21
Storing unwanted callers ............................21
Phonebook
Phonebook .................................................24
Speed dial ..................................................26
Programming
Menu list .....................................................28
Alarm ..........................................................35
Silent mode ................................................35
Baby monitor ..............................................36
Other programming ....................................38
Registering a unit .......................................38
Caller ID Service
Using Caller ID service ...............................40
Caller list ....................................................40
Answering System
Answering system ......................................43
Turning the answering system on/off .........43
Greeting message ......................................43
Listening to messages ...............................44
Advanced new message alerting
features ......................................................45
Remote operation .......................................47
Answering system settings .........................48
Useful Information
Voicemail service .......................................50
Wall mounting ............................................51
Error messages ..........................................53
Troubleshooting .........................................54
FCC and other information .........................59
Guía Rápida Española
Guía Rápida Española ...............................62
Appendix
Customer services .....................................67
Warranty (For United States and Puerto
Rico) ...........................................................68
Index
Index...........................................................70
2
Table of Contents
TGF34x_en_1201_ver043.pdf 2 2014/12/01 16:22:17
Model composition
Series Model No.
Base unit Handset
Part No. Part No. Quantity
KX-TGF340
series
KX-TGF340 KX-TGF340 KX-TGFA30 1
KX-TGF342 KX-TGF340 KX-TGFA30 2
KX-TGF343 KX-TGF340 KX-TGFA30 3
KX-TGF344 KX-TGF340 KX-TGFA30 4
KX-TGF345 KX-TGF340 KX-TGFA30 5
Accessory information
Supplied accessories
No.
Supplied handset qty.
1 unit*12 units*23 units*34 units*45 units
*5
Accessory item/
Part number
Accessory quantity
A AC adaptor/PNLV226Z 1 1 1 1 1
B
Telephone line cord
*
6
1 1 1 1 1
C Wall mounting adaptor/
P
NKL1038Z1
1 1 1 1 1
D
Rechargeable batteries
*
7
2 4 6 8 10
E
Handset cover
*8
/
PNYNTGA680BR
1 2 3 4 5
F Belt clip/PNKE1268Z1 1 2 3 4 5
G Charger/PNLC1040ZB – 1 2 3 4
*1 KX-TGF340
*2 KX-TGF342
*3 KX-TGF343
*4 KX-TGF344
*5 KX-TGF345
*6 PQJA10075Y (Black cord), PQJA10075Z (Transparent cord)
*7 See page 4 for replacement battery information.
*8 The handset cover comes attached to the handset.
A
B C D E F
For assistance, please visit www.panasonic.com/support
3
Introduction
TGF34x_en_1201_ver043.pdf 3 2014/12/01 16:22:17
G
Additional/replacement accessories
Please contact your nearest Panasonic dealer for sales information (page 67).
Accessory item Model number/Specifications
Rechargeable
batteries
HHR-4DPA
*1
R To order, please visit
www.panasonic.com/batterystore
Battery type:
– Nickel metal hydride (Ni-MH)
– 2 x AAA (R03) size for each handset
Headset KX-TCA60, KX-TCA93, KX-TCA400, KX-TCA430
T-adaptor KX-J66
Range extender
KX-TGA405
*
2
Key detector
KX-TGA20
*3
*1 Replacement batteries may have a different capacity from that of the supplied batteries.
*2 By installing this unit, you can extend the range of your phone system to include areas
where reception was previously not available. This product can be purchased online. Please
visit our Web site: www.panasonic.com/RangeExtender
*3 By registering the key detector (4 max.) to a Panasonic Digital Cordless Phone and
attaching it to an easy-to-lose item in advance, you can locate and find the mislaid item to
which the key detector is attached. Please visit our Web site:
www.panasonic.net/pcc/products/telephone/p/tga20/
Other information
R Design and specifications are subject to change without notice.
R The illustrations in these instructions may vary slightly from the actual product.
Expanding your phone system
Handset (optional): KX-TGFA30
You can expand your phone system by
registering optional handsets (6 max.) to a
single base unit.
R Optional handsets may be a different color
from that of the supplied handsets.
4
For assistance, please visit www.panasonic.com/support
Introduction
TGF34x_en_1201_ver043.pdf 4 2014/12/01 16:22:17
For your safety
To prevent severe injury and loss of life/
property, read this section carefully before
using the product to ensure proper and safe
operation of your product.
WARNING
Power connection
R Use only the power source marked on the
product.
R Do not overload power outlets and
extension cords. This can result in the risk
of fire or electric shock.
R Completely insert the AC adaptor/power
plug into the power outlet. Failure to do so
may cause electric shock and/or excessive
heat resulting in a fire.
R Regularly remove any dust, etc. from the
AC adaptor/power plug by pulling it from
the power outlet, then wiping with a dry
cloth. Accumulated dust may cause an
insulation defect from moisture, etc.
resulting in a fire.
R Unplug the product from power outlets if it
emits smoke, an abnormal smell, or makes
an unusual noise. These conditions can
cause fire or electric shock. Confirm that
smoke has stopped emitting and contact us
at www.panasonic.com/contactinfo
R Unplug from power outlets and never touch
the inside of the product if its casing has
been broken open.
R Never touch the plug with wet hands.
Danger of electric shock exists.
Installation
R To prevent the risk of fire or electrical
shock, do not expose the product to rain or
any type of moisture.
R Do not place or use this product near
automatically controlled devices such as
automatic doors and fire alarms. Radio
waves emitted from this product may cause
such devices to malfunction resulting in an
accident.
R Do not allow the AC adaptor or telephone
line cord to be excessively pulled, bent or
placed under heavy objects.
Operating safeguards
R Unplug the product from power outlets
before cleaning. Do not use liquid or
aerosol cleaners.
R Do not disassemble the product.
R Do not spill liquids (detergents, cleansers,
etc.) onto the telephone line cord plug, or
allow it to become wet at all. This may
cause a fire. If the telephone line cord plug
becomes wet, immediately pull it from the
telephone wall jack, and do not use.
Medical
R Consult the manufacturer of any personal
medical devices, such as pacemakers or
hearing aids, to determine if they are
adequately shielded from external RF
(radio frequency) energy. (The product
operates in the frequency range of
1.92 GHz to 1.93 GHz, and the RF
transmission power is 115 mW (max.).)
R Do not use the product in health care
facilities if any regulations posted in the
area instruct you not to do so. Hospitals or
health care facilities may be using
equipment that could be sensitive to
external RF energy.
CAUTION
Installation and location
R Never install telephone wiring during an
electrical storm.
R Never install telephone line jacks in wet
locations unless the jack is specifically
designed for wet locations.
R Never touch uninsulated telephone wires or
terminals unless the telephone line has
been disconnected at the network interface.
R Use caution when installing or modifying
telephone lines.
R The AC adaptor is used as the main
disconnect device. Ensure that the AC
outlet is installed near the product and is
easily accessible.
For assistance, please visit www.panasonic.com/support
5
Important Information
TGF34x_en_1201_ver043.pdf 5 2014/12/01 16:22:17
R This product is unable to make calls when:
– the handset batteries need recharging or
have failed.
– there is a power failure.
Battery
R We recommend using the batteries noted
on page 4. USE ONLY rechargeable
Ni-MH batteries AAA (R03) size.
R Do not mix old and new batteries.
R Do not open or mutilate the batteries.
Released electrolyte from the batteries is
corrosive and may cause burns or injury to
the eyes or skin. The electrolyte is toxic and
may be harmful if swallowed.
R Exercise care when handling the batteries.
Do not allow conductive materials such as
rings, bracelets, or keys to touch the
batteries, otherwise a short circuit may
cause the batteries and/or the conductive
material to overheat and cause burns.
R Charge the batteries provided with or
identified for use with this product only, in
accordance with the instructions and
limitations specified in this manual.
R Only use a compatible base unit (or
charger) to charge the batteries. Do not
tamper with the base unit (or charger).
Failure to follow these instructions may
cause the batteries to swell or explode.
Attention:
A nickel metal hydride battery that is
recyclable powers the product you have
purchased.
Please call 1-800-8-BATTERY
(1-800-822-8837) for information on how to
recycle this battery.
Important safety instructions
When using your product, basic safety
precautions should always be followed to
reduce the risk of fire, electric shock, and
injury to persons, including the following:
1. Do not use this product near water for
example, near a bathtub, washbowl,
kitchen sink, or laundry tub, in a wet
basement or near a swimming pool.
2. Avoid using a telephone (other than a
cordless type) during an electrical storm.
There may be a remote risk of electric
shock from lightning.
3. Do not use the telephone to report a gas
leak in the vicinity of the leak.
4. Use only the power cord and batteries
indicated in this manual. Do not dispose of
batteries in a fire. They may explode.
Check with local codes for possible special
disposal instructions.
SAVE THESE INSTRUCTIONS
For best performance
Base unit location/avoiding noise
The base unit and other compatible Panasonic
units use radio waves to communicate with
each other.
R For maximum coverage and noise-free
communications, place your base unit:
– at a convenient, high, and central
location with no obstructions between
the handset and base unit in an indoor
environment.
– away from electronic appliances such as
TVs, radios, personal computers,
wireless devices, or other phones.
– facing away from radio frequency
transmitters, such as external antennas
of mobile phone cell stations. (Avoid
putting the base unit on a bay window or
near a window.)
R Coverage and voice quality depends on the
local environmental conditions.
6
For assistance, please visit www.panasonic.com/support
Important Information
TGF34x_en_1201_ver043.pdf 6 2014/12/01 16:22:17
R If the reception for a base unit location is
not satisfactory, move the base unit to
another location for better reception.
Environment
R Keep the product away from electrical noise
generating devices, such as fluorescent
lamps and motors.
R The product should be kept free from
excessive smoke, dust, high temperature,
and vibration.
R The product should not be exposed to
direct sunlight.
R Do not place heavy objects on top of the
product.
R When you leave the product unused for a
long period of time, unplug the product from
the power outlet.
R The product should be kept away from heat
sources such as heaters, kitchen stoves,
etc. It should not be placed in rooms where
the temperature is less than 0 °C (32 °F) or
greater than 40 °C (104 °F). Damp
basements should also be avoided.
R The maximum calling distance may be
shortened when the product is used in the
following places: Near obstacles such as
hills, tunnels, underground, near metal
objects such as wire fences, etc.
R Operating the product near electrical
appliances may cause interference. Move
away from the electrical appliances.
Routine care
R Wipe the outer surface of the product
with a soft moist cloth.
R Do not use benzine, thinner, or any
abrasive powder.
Other information
CAUTION: Risk of explosion if battery is
replaced by an incorrect type. Dispose of used
batteries according to the instructions.
Notice for product disposal, transfer,
or return
R This product can store your private/
confidential information. To protect your
privacy/confidentiality, we recommend that
you erase information such as phonebook
or caller list entries from the memory before
you dispose of, transfer, or return the
product.
Notice
For assistance, please visit www.panasonic.com/support
7
Important Information
TGF34x_en_1201_ver043.pdf 7 2014/12/01 16:22:17
Specifications
R Standard:
DECT 6.0 (Digital Enhanced Cordless
Telecommunications 6.0)
R Frequency range:
1.92 GHz to 1.93 GHz
R RF transmission power:
115 mW (max.)
R Power source:
120 V AC, 60 Hz
R Power consumption:
Base unit:
Standby: Approx. 1.0 W
Maximum: Approx. 4.3 W
Charger:
Standby: Approx. 0.1 W
Maximum: Approx. 1.8 W
R Operating conditions:
0 °C – 40 °C (32 °F – 104 °F), 20 % – 80 %
relative air humidity (dry)
8
For assistance, please visit www.panasonic.com/support
Important Information
TGF34x_en_1201_ver043.pdf 8 2014/12/01 16:22:17
Setting up
Connections
n Base unit
Connect the AC adaptor to the unit by
pressing the plug firmly.
Fasten the cord by hooking it.
Connect the AC adaptor to the power
outlet.
Connect the telephone line cord to the
unit, then to the single-line telephone jack
(RJ11C) until you hear a click.
A DSL/ADSL filter (not supplied) is
required if you have a DSL/ADSL service.
Note:
R Use only the supplied Panasonic AC
adaptor PNLV226.
1
2
5
3
4
4
n Charger
Connect the AC adaptor to the power
outlet.
1
Battery installation
R USE ONLY rechargeable Ni-MH batteries
AAA (R03) size (
1
).
R Do NOT use alkaline/manganese/Ni-Cd
batteries.
R Confirm correct polarities (
, ).
1
R Follow the directions on the display to set
up the unit.
For assistance, please visit www.panasonic.com/support
9
Getting Started
TGF34x_en_1201_ver043.pdf 9 2014/12/01 16:22:17
Battery charging
Charge for about 7 hours.
R Confirm “Charging” is displayed (
1
).
R When the batteries are fully charged,
“Fully charged” is displayed.
1
Note when setting up
Note for connections
R The AC adaptor must remain connected at
all times. (It is normal for the adaptor to feel
warm during use.)
R The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of
the adaptor may cause it to become
disconnected.
Note for battery installation
R Use the supplied rechargeable batteries.
For replacement, we recommend using the
Panasonic rechargeable batteries noted on
page 4, 6.
Note for battery charging
R It is normal for the handset to feel warm
during charging.
R Clean the charge contacts of the handset,
base unit, and charger with a soft and dry
cloth once a month. Before cleaning the
unit, disconnect from power outlets and any
telephone line cords. Clean more often if
the unit is exposed to grease, dust, or high
humidity.
Battery level
Icon Battery level
High
Medium
Low
Needs charging.
Empty
Panasonic Ni-MH battery
performance (supplied batteries)
Operation Operating time
In continuous use
13 hours max.
*1
Not in use (standby)
12 days max.
*1
*1 If eco mode is on.
Note:
R Actual battery performance depends on
usage and ambient environment.
Intelligent eco mode
This feature automatically reduces handset
power consumption by suppressing handset
transmission power when the handset is close
to the base unit.
R When this feature is activated,
is
displayed.
R Eco mode is turned off when the clarity
booster is activated (page 17).
10
For assistance, please visit www.panasonic.com/support
Getting Started
TGF34x_en_1201_ver043.pdf 10 2014/12/01 16:22:17
Controls
Handset
I
K
L
H
M
J
A
B
E
D
C
F
G
Belt clip holes
Speaker
M N (TALK)
Headset jack
Dial keypad (*: TONE)
MZN (SP-PHONE: Speakerphone)
Microphone
Receiver
Display
MOFFN
MFLASHNMCALL WAITN
MCALL BLOCKN
Charge contacts
n Control type
Soft keys
By pressing a soft key, you can select the
feature shown directly above it on the
display.
Navigator key
– M
DN, MCN, MFN, or MEN: Scroll through
various lists and items.
– VOL. (Volume: MDN or MCN): Adjust the
receiver or speaker volume while talking.
– MFN W: View the phonebook entry.
– MEN REDIAL: View the redial list.
– MCN CID (Caller ID): View the caller list.
For assistance, please visit www.panasonic.com/support
11
Getting Started
TGF34x_en_1201_ver043.pdf 11 2014/12/01 16:22:17
Base unit
A
PO
B
E
F
D
G
J
H
I
K
L
M
N
B C
A
Charge contacts
Speaker
Display
MHOLDN
MREDIALN MPAUSEN
MFLASHN MCALL WAITN
MZN (SP-PHONE: Speakerphone)
SP-PHONE indicator
MERASEN
MANSWER ON/OFFN
ANSWER ON/OFF indicator
MLOCATORN MINTERCOMN
R You can locate a misplaced handset
by pressing MLOCATORN.
MEXITN
M N (PLAY/STOP)
Message indicator
MCALL BLOCKN
Desk stand/Wall mounting adaptor
R The adaptor is a removable
attachment for desk stand or wall
mounting use (page 51).
Microphone
Dial keypad (*: TONE)
n Control type
Soft keys
By pressing a soft key, you can select the
feature shown directly above it on the
display.
Navigator key
– M
DN, MCN, M
N, or M N: Scroll through
various lists and items.
– VOL. (Volume: M
DN or MCN): Adjust the
speaker volume while talking.
– M
N/M N: Repeat/skip messages
during playback.
Display icons
Handset display items
Item Meaning
Within base unit range
Out of base unit range
The line is in use.
R When flashing:
The call is put on hold.
R When flashing rapidly: An
incoming call is now being
received.
Eco mode is on. (page 10)
Noise reduction is set.
(page 17)
Equalizer is set. (page 17)
Z Speakerphone is on.
(
page 15)
Ringer volume is off.
(page 30)
Silent mode is on. (page 35)
Call sharing mode is off.
(page 32)
Alarm is on. (page 35)
Handset number
Battery level
Blocked call (page 21)
12
For assistance, please visit www.panasonic.com/support
Getting Started
TGF34x_en_1201_ver043.pdf 12 2014/12/01 16:22:17
Item Meaning
Clarity booster is on.
(page 17)
Baby monitor is activated. The
name/number displayed next
to the icon indicates the
monitoring unit. (page 36)
In use
Answering system is being
used by another handset or the
base unit.
Line in
use
Someone is using the line.
Base unit display items
Item Meaning
Ringer volume is off.
(page 33)
Silent mode is on. (page 35)
Call sharing mode is off.
(page 32)
“Greeting Only” is
selected. Caller messages are
not recorded. (page 49)
Blocked call (page 21)
In use
Answering system is being
used by a handset.
Line in
use
Someone is using the line.
Language settings
Display language
You can select either “English” or
“Español” as the display language. The
default setting is “English”.
Handset / Base unit
1 MMENUN#110
2 M
bN: Select the desired setting. a
MSAVEN
3 Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Voice guidance language
You can select either “English” or
“Español” as the voice guidance language
of the answering system. The default setting is
“English”.
Handset
1 MMENUN#112
2 M
bN: Select the desired setting.
3 MSAVEN a MOFFN
Date and time
Handset
1 MMENUN#101
2 Enter the current month, date, and year
by selecting 2 digits for each.
Example: July 12, 2015
07 12 15
3 MOKN
4 Enter the current hour and minute
(12-hour clock format) by selecting 2
digits for each.
Example: 9:30
09 30
5 *: Select “AM” or “PM”.
6 MSAVEN a MOFFN
Note:
R When English is selected as the display
language, 12-hour clock format is used.
When Spanish is selected, 24-hour clock
format is used.
For assistance, please visit www.panasonic.com/support
13
Getting Started
TGF34x_en_1201_ver043.pdf 13 2014/12/01 16:22:17
Recording your greeting message
You can record your own greeting message
instead of using a pre-recorded greeting
message. See page 43 for details.
Handset
1 MMENUN#302
2 M
bN: “Yes” a MSELECTN
3 Record a greeting message. a MSTOPN
a MOFFN
Other settings
Dialing mode
If you cannot make calls, change this setting
according to your telephone line service. The
default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary/pulse dial service.
Handset
1 MMENUN#120
2 M
bN: Select the desired setting.
3 MSAVEN a MOFFN
14
For assistance, please visit www.panasonic.com/support
Getting Started
TGF34x_en_1201_ver043.pdf 14 2014/12/01 16:22:17
Making calls
Using the handset
1 Lift the handset and dial the phone
number.
R To correct a digit, press MCLEARN.
2 M N
3 When you finish talking, press MOFFN or
place the handset on the base unit or
charger.
Using the speakerphone
1 Dial the phone number and press M
ZN.
2 When you finish talking, press MOFFN.
Note:
R To switch back to the receiver, press M
ZN/
M
N.
Making a call using the redial list
The last 5 phone numbers dialed are stored in
the redial list (each 48 digits max.).
1 M
EN REDIAL
2 M
bN: Select the desired phone number.
3 M
N
Erasing a number in the redial list
1 M
EN REDIAL
2 M
bN: Select the desired phone number.
a MERASEN
3 M
bN: “Yes” a MSELECTN a MOFFN
Using the base unit
1 Dial the phone number.
R To correct a digit, press MCLEARN.
2 M
ZN
3 When the other party answers, speak into
the microphone.
4 When you finish talking, press M
ZN.
Note:
R While on a call, you can switch from the
base unit to the handset:
– Press M
N on the handset, then press
M
ZN on the base unit with the call
sharing mode on (page 32).
– If the handset is on the base unit, simply
lift it.
Making a call using the redial list
The last 10 phone numbers dialed are stored
in the redial list (each 48 digits max.).
1 MREDIALN
2 M
bN: Select the desired phone number.
3 M
ZN
Erasing a number in the redial list
1 MREDIALN
2 M
bN: Select the desired phone number.
a MERASEN
3 M
bN: “Yes” a MSELECTN
4 MEXITN
Adjusting the receiver or speaker
volume
Handset / Base unit
Press M
DN or MCN repeatedly while talking.
Pause (for PBX/long distance
service users)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 26).
Example: If you need to dial the line access
number “9” when making outside calls with a
PBX:
Handset
1 9 a M
DN (Pause)
2 Dial the phone number. a M N
For assistance, please visit www.panasonic.com/support
15
Making/Answering Calls
TGF34x_en_1201_ver043.pdf 15 2014/12/01 16:22:17
Base unit
1 9 a MPAUSEN
2 Dial the phone number. a M
ZN
Note for handset and base unit:
R A 3.5 second pause is inserted each time
you press MDN (Pause) on the handset or
MPAUSEN on the base unit.
Answering calls
Using the handset
1 Lift the handset and press M
N or M N
when the unit rings.
2 When you finish talking, press MOFFN or
place the handset on the base unit or
charger.
Any key answer: You can answer the call by
pressing any dial key.
Auto talk: You can answer calls simply by
lifting the handset (page 32).
Temporary handset ringer off: You can turn
the ringer off temporarily by pressing M
N.
Using the base unit
When a call is being received, the SP-PHONE
indicator flashes rapidly.
1 Press M
ZN when the unit rings.
2 Speak into the microphone.
3 When you finish talking, press M
ZN.
Adjusting the ringer volume
Handset / Base unit
Press M
DN or MCN repeatedly to select the
desired volume while ringing.
Useful features during a call
Hold
Handset
1 Press MMENUN during an outside call.
2 M
bN: “Hold” a MSELECTN
3 To release hold, press M
N.
R Another handset user can take the call
by pressing M
N.
R The base unit user can take the call by
pressing M
ZN.
Base unit
1 Press MHOLDN during an outside call.
2 To release hold, press M
ZN.
R A handset user can take the call by
pressing M
N.
Note for handset and base unit:
R While an outside call is on hold, the
SP-PHONE indicator on the base unit
flashes.
R After holding for 10 minutes, the call is
disconnected.
Mute
Handset
1 Press MMUTEN during a call.
2 To return to the call, press MMUTEN.
Base unit
1 Press MMUTEN during a call.
R The SP-PHONE indicator flashes.
2 To return to the call, press MMUTEN.
Note for handset and base unit:
R MMUTEN is a soft key visible on the display
during a call.
16
For assistance, please visit www.panasonic.com/support
Making/Answering Calls
TGF34x_en_1201_ver043.pdf 16 2014/12/01 16:22:17
Flash
Handset / Base unit
MFLASHN allows you to use the special
features of your host PBX such as transferring
an extension call, or accessing optional
telephone services.
Note:
R To change the flash time, see page 32.
For call waiting or Call Waiting
Caller ID service users
To use call waiting or Call Waiting Caller ID,
you must first subscribe with your phone
service provider.
This feature allows you to receive calls while
you are already talking on the phone. If you
receive a call while on the phone, you will hear
a call waiting tone.
If you subscribe to both Caller ID and Call
Waiting with Caller ID services, the 2nd
caller’s information is displayed on the
handset or base unit that is in use after you
hear the call waiting tone.
Handset / Base unit
1 Press MCALL WAITN to answer the 2nd
call.
2 To switch between calls, press MCALL
WAITN.
Note:
R Please contact your phone service provider
for details and availability of this service in
your area.
Temporary tone dialing (for
rotary/pulse service users)
Handset / Base unit
Press * (TONE) before entering access
numbers which require tone dialing.
Handset clarity booster
This feature can improve sound clarity when
the handset is used in an area where there
may be interference. During an outside call,
this feature is turned on automatically when
necessary.
R When this feature is turned on,
is
displayed.
Handset noise reduction
This feature allows you to hear the voice of
the person you are talking to more clearly, by
reducing the surrounding noise coming from
the other party’s telephone.
1 Press MMENUN while talking.
2 MbN: “Noise reduction on” or
“Noise reduction off” a
MSELECTN
Note:
R Depending on the environment where this
handset is being used, this feature may not
be effective.
R This feature is not available while using the
speakerphone.
Handset equalizer
This feature clarifies the voice of the person
you are talking to, producing a more
natural-sounding voice that is easier to hear
and understand.
1 Press MMENUN while talking.
2 MbN: “Equalizer” a MSELECTN
3 M
bN: Select the desired setting.
4 Press MOKN to exit.
Note:
R Depending on the condition and quality of
your telephone line, this feature may
emphasize existing line noise. If it becomes
difficult to hear, turn this feature off.
R This feature is not available while using the
speakerphone.
R When both the “Equalizer” setting and
noise reduction are activated,
is
shown on the display.
Call share
You can join an existing outside call.
For assistance, please visit www.panasonic.com/support
17
Making/Answering Calls
TGF34x_en_1201_ver043.pdf 17 2014/12/01 16:22:17
Handset
To join the conversation, press M
N when
the other unit is on an outside call.
Base unit
To join the conversation, press M
ZN when the
handset is on an outside call.
Note for handset and base unit:
R A maximum of 3 parties (including 1 outside
party) can join a conversation using 2
extensions. (3-way conference)
R To prevent other users from joining your
conversations with outside callers, turn call
sharing mode off (page 32).
Transferring calls, conference
calls
Outside calls can be transferred or a
conference call with an outside party can be
made:
– between 2 handsets
– between a handset and the base unit
Handset
1 During an outside call, press MMENUN.
2 M
bN: “Intercom” a MSELECTN
3 M
bN: Select the desired unit. a MSELECTN
4 Wait for the paged party to answer.
R If the paged party does not answer,
press MBACKN to return to the outside
call.
5 To complete the transfer:
Press MOFFN.
To establish a conference call:
MMENUN a M
bN: “Conference” a
MSELECTN
R To leave the conference, press MOFFN.
The other 2 parties can continue the
conversation.
R To put the outside call on hold:
MMENUN a M
bN: “Hold” a
MSELECTN
To resume the conference: MMENUN
a M
bN: “Conference” a MSELECTN
R To cancel the conference: MMENUN a
M
bN: “Stop conference” a
MSELECTN
You can continue the conversation
with the outside caller.
Base unit
1 During an outside call, press
MINTERCOMN.
When 2 or more handsets are
registered:
– To page a specific handset, enter the
handset number.
– To page all handsets, press 0 or wait
for a few seconds.
2 Wait for the paged party to answer.
R If paged party does not answer, press
MINTERCOMN to return to the outside
call.
3 To complete the transfer:
Press M
ZN.
R The outside call is being routed to the
handset.
To establish a conference call:
Press MCONFN.
R To leave the conference, press MZN.
The other 2 parties can continue the
conversation.
R To put the outside call on hold, press
MHOLDN. To resume the conference,
press MCONFN.
Intercom
Intercom calls can be made:
– between handsets
– between a handset and the base unit
Note:
R When paging unit(s), the paged unit(s)
beeps for 1 minute.
R If you receive an outside call while talking
on the intercom, the interrupt tone sounds.
– Handset: To finish intercom, press
MOFFN. To answer the call, press M
N.
– Base unit: To finish intercom, press
M
ZN. To answer the call, press MZN
again.
18
For assistance, please visit www.panasonic.com/support
Making/Answering Calls
TGF34x_en_1201_ver043.pdf 18 2014/12/01 16:22:17
Making an intercom call
Handset
1 MMENUN a M
bN: “Intercom” a
MSELECTN
2 M
bN: Select the desired unit. a MSELECTN
3 When you finish talking, press MOFFN.
Note:
R You can also use the MINTERCOMN soft
key, if displayed, to make intercom calls.
Base unit
1 Press MINTERCOMN.
When 2 or more handsets are
registered:
– To page a specific handset, enter the
handset number.
– To page all handsets, press 0 or wait
for a few seconds.
2 When you finish talking, press M
ZN.
Answering an intercom call
Handset
1 Press M
N to answer the page.
2 When you finish talking, press MOFFN.
Base unit
1 Press M
ZN to answer the page.
2 When you finish talking, press M
ZN.
Turning auto intercom on/off
This feature allows the handset or base unit to
answer intercom calls automatically when it is
called. You do not need to press M
N or
M
ZN. When this feature is set to “On”, the
monitoring handset or base unit for the baby
monitor feature (page 36) will also answer
baby monitor calls automatically. The default
setting is “Off”.
Handset / Base unit
1 MMENUN#273
2 MbN: Select the desired setting. a
MSAVEN
3 Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Power backup operation
When a power failure occurs, the charged
handset temporarily supplies power to the
base unit (power backup mode). This allows
you to make and receive calls using a handset
during a power failure. The base unit will not
perform any other functions. However, some
functions such as Caller ID and phonebook
are available only when using a handset other
than the handset supplying power to the base
unit. You can program “Power failure”
and the default setting is “Auto” (page 32).
Important:
R If a handset is not placed on the base unit
when a power failure occurs, “Base no
power Press OFF” is displayed. After
pressing MOFFN on the handset, place it on
the base unit to start power backup mode.
R Power backup mode will not work if the
battery level of the power supplying
handset is
or .
R Do not lift the power supplying handset
from the base unit during power backup
mode.
Panasonic Ni-MH battery
performance (supplied batteries)
during power backup mode
When the batteries are fully charged,
operating time of the handset in power backup
mode varies depending on usage.
– Continuous use of the handset in power
backup mode: 1.5 hours max.
– Continuous use of the handset other than a
handset in power backup mode: 2 hours
max.
– Not in use in power backup mode: 2 hours
max.
For assistance, please visit www.panasonic.com/support
19
Making/Answering Calls
TGF34x_en_1201_ver043.pdf 19 2014/12/01 16:22:17
Making calls during a power
failure
n When only 1 handset is registered:
1 Lift the handset and dial the phone
number.
2 Within 1 minute, place the handset on
the base unit.
R Wait until speakerphone is turned
on automatically and the call is
made.
3 When the other party answers the call,
keep the handset on the base unit and
talk using the speakerphone.
4 When you finish talking, press MOFFN.
n When 2 or more handsets are registered:
You should leave one handset on the base
unit for supplying the power, and use
another handset for making calls.
Note:
R The range of the base unit is limited during
a power failure. Please use the handset
close to the base unit.
Making a call using the redial list
n When only 1 handset is registered:
1 Lift the handset.
2 M
EN REDIAL
3 M
bN: Select the desired phone number.
4 Within 1 minute, place the handset on
the base unit.
R Wait until speakerphone is turned
on automatically and the call is
made.
n When 2 or more handsets are registered:
You should leave one handset on the base
unit for supplying the power, and use
another handset for making calls.
Making a call using the phonebook
There must be at least 2 handsets
registered to the base unit in order for the
phonebook feature to be used during a
power failure.
You should leave one handset on the base
unit for supplying the power, and use another
handset for making calls.
Answering calls during a power
failure
n When only 1 handset is registered:
1 When the unit rings, keep the handset
on the base unit and press M
N or
M
ZN.
R Speakerphone is turned on.
2 When you finish talking, press MOFFN.
n When 2 or more handsets are registered:
When the unit rings, use a handset which is
not supplying power to the base unit.
R Do not use or lift the handset which is
placed on the base unit during power
backup mode.
Note:
R The range of the base unit is limited during
a power failure. Please use the handset
close to the base unit.
20
For assistance, please visit www.panasonic.com/support
Making/Answering Calls
TGF34x_en_1201_ver043.pdf 20 2014/12/01 16:22:17
Using the MCALL BLOCKN
button
You can press the MCALL BLOCKN button in
the following situations to disconnect the
current call and add a phone number to the
call block list:
– when an incoming call is being received
– when an incoming call is being recorded by
the answering system
– when talking on an outside call
Once a phone number has been added to the
call block list, the unit will block calls from that
phone number in the future.
Handset / Base unit
1 Press MCALL BLOCKN under the
situations shown above.
2 Confirm the call block number and press
MYESN.
R The call block number is stored in the
call block list, “Caller blocked” is
displayed, and then the call is
disconnected.
Note:
R If the call has no phone number, the call is
blocked but it is not stored in the call block
list.
R The call block feature is not available for
intercom calls or calls received by call
waiting.
R Blocked calls are logged in the caller list.
Storing unwanted callers
The unit can block calls by storing the desired
items in the call block list beforehand (Caller
ID subscribers only).
– “Block a single number”*1/“Block
a single #”*2: The unit blocks calls from
specific phone numbers stored in the call
block list.
– “Block range of numbers”*1/“Block
range of #”*2: The unit blocks calls that
begin with a number stored in the call block
list, such as a toll-free phone number prefix
or certain area codes.
– “Block unknown CID”*1/“Block
unknown”*2: The unit blocks calls that
have no phone number.
*1 Handset
*2 Base unit
Single phone numbers and ranges of numbers
can be stored in the call block list up to 250
items in total.
Blocking unwanted callers:
When a call is received, the unit rings briefly
*1
while caller information is being received.
If the caller’s phone number matches an entry
in the call block list, the unit emits no sound to
the caller, and disconnects the call.
*1 If you do not want this one ring to sound,
select “No” in “Setting not to ring once for
blocked call” (page 22).
Storing a single phone number
Important:
R We recommend storing 10 digits (including
the area code). If only 7 digits are stored, all
numbers that have the same last 7 digits
will be blocked.
Adding call blocked numbers from
the caller list
Handset
1 M
CN CID
2 M
bN: Select the entry to be blocked.
R To edit the number: MMENUN a MbN:
“Edit” a MSELECTN
Press MEDITN repeatedly until the
phone number is shown in the 10-digit
format. a MSAVEN a M
bN: “Call
block” a MSELECTN a Go to step
4.
3 MCALL BLOCKN
4 M
bN: “Yes” a MSELECTN
5 Edit the phone number if necessary (24
digits max.).
6 MSAVEN a MOFFN
For assistance, please visit www.panasonic.com/support
21
Call Block
TGF34x_en_1201_ver043.pdf 21 2014/12/01 16:22:18
Base unit
1 MCIDN
2 M
bN: Select the entry to be blocked.
R To edit the number: Press MEDITN
repeatedly until the phone number is
shown in the 10-digit format.
3 MCALL BLOCKN
4 MbN: “Yes” a MSELECTN
5 Edit the phone number if necessary (24
digits max.).
6 MSAVEN a MEXITN
Adding call blocked numbers
manually
Handset
1 MCALL BLOCKN
2 M
bN: “Block a single number” a
MSELECTN
3 MMENUN a M
bN: “Add” a MSELECTN
4 Enter the phone number (24 digits max.).
5 MSAVEN a MOFFN
Base unit
1 MCALL BLOCKN
2 M
bN: “Block a single #” a
MSELECTN
3 MADDN
4 Enter the phone number (24 digits max.).
5 MSAVEN a MEXITN
Storing a range of number
Handset
1 MCALL BLOCKN
2 M
bN: “Block range of numbers” a
MSELECTN
3 MMENUN a M
bN: “Add” a MSELECTN
4 Enter the desired number (2-8 digits).
5 MSAVEN a MOFFN
Base unit
1 MCALL BLOCKN
2 M
bN: “Block range of #” a
MSELECTN
3 MADDN
4 Enter the desired number (2-8 digits).
5 MSAVEN a MEXITN
Blocking incoming calls that
have no phone number
You can block calls when no phone number is
provided, such as private callers or out of area
calls.
Handset
1 MCALL BLOCKN
2 M
bN: “Block unknown CID” a
MSELECTN
3 M
bN: Select the desired setting. a
MSAVEN a MOFFN
Base unit
1 MCALL BLOCKN
2 M
bN: “Block unknown” a MSELECTN
3 M
bN: Select the desired setting. a
MSAVEN a MEXITN
Setting not to ring once for
blocked call
If you do not want the unit to sound one ring
for calls from phone numbers stored in the call
block list, select “No”. The default setting is
“Yes”.
Handset
1 MCALL BLOCKN
2 M
bN: “One ring for blocked call”
a MSELECTN
3 M
bN: Select the desired setting. a
MSAVEN a MOFFN
22
For assistance, please visit www.panasonic.com/support
Call Block
TGF34x_en_1201_ver043.pdf 22 2014/12/01 16:22:18
Loading...