Panasonic KX-TGA272S User Manual

Preparation Basic Operation Advanced Operation Useful Information

2.4GHz Expandable Cordless Handset

Operating Instructions

Model No. KX-TGA272S

Pulse-or-tone dialing capability

PLEASE READ BEFORE USE AND SAVE.

Panasonic World Wide Web address: http://www.panasonic.com

for customers in the USA or Puerto Rico

Charge the battery for about 15 hours before initial use.

The KX-TGA272S will only work with the Panasonic KX-TG2700/ KX-TG2720/KX-TG2730/KX-TG2740 Cordless Phone System.

Caller ID Compatible

Accessories

(included) For extra orders, call 1-800-332-5368.

Charger Unit (p. 8) Charger Order No. PQLV30015ZB AC Adaptor

Order No. KX-TCA1-G (KX-TCA1)

one

Battery

(p. 7, 60)

Order No. N4HHGMB00001

(HHR-P103)

one

Handset Cover (p. 7, 60)

Order No. PQKK10129Z1

one

Thank you for purchasing your new Panasonic cordless telephone.

Attach your purchase receipt here.

Preparation Basic Operation Advanced Operation Useful Information

For assistance, please call: 1-800-211-PANA(7262)

Contents

For assistance, please call: 1-800-211-PANA(7262)

Preparation

Location of Controls .....................4

Display............................................6

Installation .....................................7

Installing the Battery ....................7

Connection ...................................8

Battery Charge..............................8

Registration .................................10

Clock Setting ...............................11

Date and Time ............................11

Turning the Alarm ON .................12

Programmable Settings ..............14

Programming Guidelines.............14

Function Menu Table ..................15

Auto Talk Feature .......................16

Ringer Volume ............................16

Ringer Tone ................................18

LCD Contrast ..............................19

LCD Backlight .............................20

Basic Operation

Making Calls ................................21

Answering Calls ..........................25

Caller ID Service..........................26

Using the Caller List ...................27

Viewing the Caller List ................27

Calling Back from the Caller List

......28

Editing the Caller’s Phone Number

..29 Storing Caller List Information

in the Directory............................31

Erasing Caller List Information....32

Advanced Operation

Directory.......................................32

Storing Names and Numbers .....32

Dialing from the Directory ...........35

Editing .........................................36

Erasing ........................................37

Sending the Directory .................38

Intercom .......................................40

Transferring a Call.......................41

Using the Other Line During a Conversation (For KX-TG2720/KX-TG2740 Users)

..........42

Conference...................................43

Call Share ...................................44

Room Monitor Feature................44

Special Features..........................46

Muting Your Conversation ..........46

For Call Waiting Service Users

.....46

Temporary Tone Dialing (For Rotary or Pulse Service Users)

....46

FLASH Button .............................46

How to Use the PAUSE Button (For PBX Line/Long Distance Calls)

....47

Incoming Call Tone .....................47

Line Selection (For KX-TG2720/ KX-TG2740 Users)

.......................48

Mailbox Features (For KX-TG2730/ KX-TG2740 Users)

..........................49

Listening to Messages

(Remote Operation) ....................49

Transferring a Call to a Mailbox

.......51

Voice Mail Service (For KX-TG2700/ KX-TG2720 Users)

..........................52

Other Programmable Settings

......53

Base Unit Settings (For KX-TG2700/ KX-TG2720/KX-TG2730 Users)

........53

Telephone System Settings ........54

Answering System Settings

(For KX-TG2730 Users)..............56

Voice Mail Programming (For KX-TG2700/KX-TG2720 Users)

....59

Useful Information

Battery Replacement...................60

Canceling Registration/

Re-registration.............................62

Canceling the Handset

Registration .................................62

Re-registering the Handset ........63

Troubleshooting ..........................64

FCC and Other Information ........65

Speciﬁcations ..............................66

Index .............................................67

Location of Controls

Back

TIO

CALL WAIT

CLEAR

-T

FLASH

REDIAL

PAU

(TONE) Button (p. 46)

(TALK) Button (p. 21, 25, 28, 35)

TALK Indicator (p. 21, 24, 25)

Button (p. 14, 43)

CONF

(Conference)

/FUNCTION

Microphone

Charge Contacts (p. 9)

Antenna

(OFF) Button

(p. 14, 21, 27, 49)

(HOLD/CLEAR)

(INTERCOM/TRANSFER)

Button (p. 24, 40, 41, 42)

(PAUSE/REDIAL)

Button (p. 23, 47)

Receiver

(FLASH/CALL!WAIT)

Button (p. 46)

Front

SNOOZE/

ALARM

SP-PHO

(SNOOZE/ALARM) Button (p. 11, 13, 14, 27, 35, 49)

Navigator Key ( , , , ) (p. 5, 11, 14, 23, 27, 33)

Speaker

(Speakerphone) Button (p. 21, 25, 28, 35)

Soft Keys (p. 5, 10, 12, 14, 22, 29, 45, 46, 49)

Display (p. 6)

Preparation

For assistance, please call: 1-800-211-PANA(7262)

Charger unit

How to use the Navigator key

This key has four active areas that are indicated by arrows.

•Pressing the up and down arrows allows you

•– to scroll through a list of settings, the Caller List and your

personal directory,

•– to adjust the ringer and the speaker/receiver volumes, or

•– to select characters or numbers when entering directory

items or setting the clock.

•Pressing the right arrow allows you to enter the directory list or to select your menu choices.

Throughout these Operating Instructions, the Navigator key is indicated by the arrows Ö, Ñ, Ü or á.

How to use the soft keys:

Three soft keys are used to select functions displayed directly below the keys. Functions displayed below the keys will change depending on the state of usage and which base unit model (KX-TG2700/KX-TG2720/ KX-TG2730/KX-TG2740) this handset is registered to.

To operate “ ”, press the left soft key.

To operate “ ”, press the right soft key.

•

When a function does not appear below a soft key, the soft key will not work.

ALARM

FUNCTION

PRIVACY

[2]

CHARGE

Charge Contacts (p. 9)

CHARGE Indicator (p. 8)

AC Adaptor (p. 8)

JAN.10

12:00AM

FUNCTION

ALARM

(Example)

APR.10 8:00AM

12:00AM

FUNCTION

ALARM

APR.10 8:00AM

12:00AM

FUNCTION

ALARM

PRIVACY

[2]

IN USE

For KX-TG2700/KX-TG2730 users

&' ( ) *

#The prompts on the top line will show corresponding functions of the

three soft keys which are located directly above the display (p. 5). Ex. The soft key above “” will work as key.

$The time is displayed while the handset is not in use. The display shows

the dialed number, call status, programming options and directory items etc. “” with the extension numbers will be displayed during an intercom (p. 40) or a conference call (p. 43), or while using the Room Monitor feature (p. 45). If you subscribe to a Caller ID service, caller information will be displayed. “Received calls” will be displayed when new calls have been received.

%“”(IN USE icon), or “” and “” (Line stations icons) function

as follows.

“SP” appears when using the speakerphone during an intercom call or a conference call, while listening to messages (for KX-TG2730/KX-TG2740 users) or when monitoring a room from the speaker.

'“” (directory icon)

appears

when storing, viewing, sending or

receiving the directory items (p. 32).

(“PRIVACY” indicates the Call Privacy mode is on (p. 44). The base unit

and other handsets cannot join your conversation.

)The battery icon indicates the battery strength (p. 8). *The extension number of the handset is displayed after the handset has

been registered to the base unit (p. 10, 63).

+“” is displayed with the set time when you set the alarm (p. 13).

L1IN USE

FUNCTIONFUNCTION

Display

Off (invisible) The line is free. On The line is being used. Flashing

A call is on hold within this system (handset or base unit). The Answering System is responding to a call (for KX-TG2730/KX-TG2740 users

Flashing quickly

A call is being received.

PRIVACY

[2]

For KX-TG2720/KX-TG2740 users

%&' ( )*

L1 L2

Preparation

For assistance, please call: 1-800-211-PANA(7262)

Installation

Installing the Battery

A rechargeable Nickel-Metal Hydride (Ni-MH) battery powers the handset. Install the battery and charge it for about 15 hours before initial use (p. 8).

Push up on the triangle of the battery holder to release (#), and bring down the holder ($).

Insert the battery into the handset as shown, matching the correct polarity.

Bring up the holder and insert the tab into the slot. Press down the top of the holder until it clicks into position.

Slot

Ta b

Close the handset cover until it clicks into position.

Battery Charge

Place the handset on the charger and charge for about 15 hours before initial use.

•The CHARGE indicator lights, a beep sounds and “Charging” will be displayed.

Note: If a fully charged battery is disconnected from the unit and plugged in again, the LCD display will show

“”. Charge the battery for about 15 hours to obtain

full strength.

CHARGE Indicator

Connection

•USE ONLY WITH Panasonic AC ADAPTOR KX-TCA1 (Order No. KX-TCA1-G).

•The AC adaptor must remain connected at all times. (It is normal for the adaptor

to feel warm during use.)

Installation

AC Adaptor

Power Outlet (AC 120 V, 60 Hz)

Battery strength

You can check the battery strength on the handset display. The battery strength is as shown in the chart below.

Display prompt Battery strength

Fully charged

Medium

Low

Needs to be recharged.(ﬂashing)

Discharged

Preparation

For assistance, please call: 1-800-211-PANA(7262)

•The battery operating time may be shortened depending on usage conditions and ambient temperature.

•Clean the charge contacts of the handset and the charger with a soft, dry cloth once a month. Clean more often if the unit is subject to grease, dust or high humidity. Otherwise the battery may not charge properly.

•If the battery is fully charged, you do not have to place the handset on the charger until “Recharge battery” is displayed and/or “” ﬂashes. This will maximize the battery life.

•The battery cannot be overcharged.

Recharge

Recharge the battery when:

—

“Recharge battery” is displayed, —“ ” ﬂashes on the display, or —the handset beeps intermittently while it is in

use.

•

If you DO NOT recharge the handset battery for more than 15 minutes, the display will continually indicate “Recharge battery” and/or “” will ﬂash when the handset is lifted off the charger.

•

If the battery has been discharged, the handset will display “Charge for 15HRS” and “” when you place the handset on the charger. The handset will not work. Keep charging.

Battery information

After your Panasonic battery is fully charged (p. 8):

Operation Operating time

While in use (TALK)

While not in use (Standby)

While using the Reception Booster feature (p. 23)

Up to 3.5 hours

Up to 7 days

Up to 2.7 hours

Recharge battery

11:30AM

PRIVACY

[2]

Registration

The handset display shows the instructions as shown on the right.

Base unit: Press (MUTE).

•The MUTE indicator light ﬂashes.

Handset:

#Press the soft key ( ).

$Wait until a long beep sounds and the

display shows the registered number. The registration will be then complete.

•The registered number “[1]”to “[8]” is shown on the bottom right of the

display.

•You can stop registration by pressing (SNOOZE/ALARM) or (OFF) on the handset and pressing (MUTE) on the base unit.

•The displays will vary depending on which base unit model this handset is registered to.

Ex. Extension number 2

This cordless handset must be registered at the KX-TG2700/KX-TG2720/ KX-TG2730/KX-TG2740 base unit. The handset will be assigned the extension number at registration. Only one handset can be registered at a time. Make sure the base unit and the other handsets are not being

used. Registration must be completed within 1 minute.

To re-register a handset to a different base unit of the same model, see pages 62 and 63.

Press MUTE on base unit, then OK on handset to register handset

PRIVACY

[-]

Handset

Registering

PRIVACY

[-]

Handset [2]

Registered

PRIVACY

[2]

•The illustration of the base unit is the KX-TG2730.

(MUTE) Button and Indicator

O K

Soft Key (

O K

)

Press MUTE on base unit, then OK on handset to register handset [-]

O K

Preparation

For assistance, please call: 1-800-211-PANA(7262)

Clock Setting

Date and Time

Make sure the handset is not being used.

Press (SNOOZE/ALARM).

•

“Set date & time” is displayed if the clock has not been set yet.

Enter the year, month, day and time using

Ö, Ñ and á.

•

You can scroll to the desired number by pressing Ö or Ñ. To move forward, press á. To move backward, press Ü.

•If you enter a wrong year/month/day/time, move

to the desired ﬁeld by pressing Ü or á, then correct it by pressing Ö or Ñ.

•You can also enter the year, month, day and

time using the dialing buttons ((0) to (9)).

Select “AM” or “PM” by pressing Ö or Ñ.

•You can also press (*) to select “AM” or “PM”.

Press the soft key ( ).

•A beep sounds and the clock starts working.

•If 3 beeps sound, the setting is invalid. Start again from step 2.

•To exit the programming mode, press (SNOOZE/ALARM) or (OFF)

•You can exit the programming mode any time by pressing (SNOOZE/ALARM) or (OFF)

•When entering the time using the dialing buttons, you cannot enter numbers greater than 12. Do not use military time. (To set 13:00 hours, enter “0100”, and select “PM”.)

To check the date and time

While the handset is not being used, press

(SNOOZE/ALARM).

•The date will be displayed above the time.

•The display will light for a few seconds. To make the

display stay lit with the handset on the charger while not in use (standby mode), turn the LCD backlight mode on (p. 20).

SAVE

Date:2002.08.10 Time:09:30 AM

=Date&Time

Charging

Set date & time

Date:2002.08.10 Time:09:30 PM

=Date

&Tim

SAVE

Date:2002.01.01 Time:12:00 AM

=Date&Time

SAVE

AUG.10

11:30AM

FUNCTION

ALARM

Ex. Aug. 10, 2002, 9:30

Ex. Handset on Charger

For Caller ID service users (p. 26)

•The Caller ID information will reset the clock after the ﬁrst ring if the adjusted time is incorrect.

•

If the clock has not previously been set, the Caller ID information will not adjust the clock.

•

The Caller ID information will automatically adjust the clock for daylight saving time.

Clock Setting

Turning the Alarm ON

The handset has an alarm clock. You can set the alarm to ring at the set time. The alarm will ring for 10 minutes and will automatically stop if you do not stop it (p. 13).

Make sure the handset is not being used.

Press (SNOOZE/ALARM).

Within 5 seconds, press the soft key ().

#Scroll to the desired hour by pressing Ö

or Ñ, and press á.

$Scroll to the desired minute by pressing

Ö or Ñ, and press á.

•To move between the hour and minute, press Ü or á. You can change the hour/minute by pressing Ö or Ñ.

•

You can also enter the hour or minute by using the dialing buttons ((0) to (9)).

ALARM

AUG.10

11:30AM

FUNCTION

ALARM

OFF ON

Set alarm

12:00 AM

Tim

To adjust the date and time

1. Press (SNOOZE/ALARM).

•You can also press (CONF/FUNCTION) to directly

enter the function menu (p. 15) and go to step 3.

2. Within 5 seconds, press the soft key ().

3. Scroll to “Date and time” by pressing Ö or Ñ, and press á.

4. Adjust the date and time, using Ö, Ñ, Ü or

á.

5. Press the soft key ( ).

SAVE

FUNCTION

---------------

Save directory

Ringer setting

Date and time

Copy directory

AUG.10

11:30AM

FUNCTION

ALARM

Set alarm

06:30 AM

=Time

Ex. Set time: 6:30

Preparation

For assistance, please call: 1-800-211-PANA(7262)

Select “AM” or “PM” by pressing Ö or Ñ.

•You can also press (*) to select “AM” or “PM”.

Press the soft key ( ) to turn the alarm on.

•

A beep sounds and “” is displayed.

•When you are using the handset or a call is being received, the alarm will ring after you end the operations or the handset stops ringing for the in-coming call.

To stop the alarm

While the alarm is ringing, you can stop it temporarily by pressing (SNOOZE/ALARM). The alarm will then start ringing again in 9 minutes. The SNOOZE function can be used repeatedly.

To stop the alarm completely, you need to turn the SNOOZE mode off. Press (SNOOZE/ALARM), then the soft key ( ).

•A beep sounds and “SNOOZE” will disappear.

•To turn the SNOOZE mode off while the alarm is

ringing, press (SNOOZE/ALARM), then press the soft key ( ). You have 20 seconds to press the soft key ( ). Otherwise “” will disappear and you cannot use the soft key ( ). In that event press (SNOOZE/ALARM), then press the soft key ( ) within 5 seconds.

•The alarm will ring daily until you turn it off.

To turn the alarm OFF

1. Press (SNOOZE/ALARM), and within 5

seconds, press the soft key ( ).

2. Press the soft key ( ).

•A beep sounds and “” will disappear.

OFF

ALARM

STOP

STOPSTOP

STOP

OFF ON

Set alarm

06:30 AM

=Time

Set alarm

06:30 AM

Alarm ringing.

-----Alarm------

06:30AM

SNOOZE button pressed.

FUNCTION

STOP

ALARM

SNOOZE 06:30AM

06:30AM

STOP button pressed.

FUNCTION

ALARM

AUG.10 06:30AM

06:30AM

OFF ON

Set alarm

06:30 AM

=Time

Programmable Settings

Programming Guidelines

This unit has programmable functions. Most of them are selected from the function menu on the display (p. 15).

How to select a function item from the menu

Make sure the handset is not being used.

1. Press (SNOOZE/ALARM).

•You can also press (CONF/FUNCTION) to directly

enter the main menu and go to step 3.

2. Within 5 seconds, press the soft key ().

•

The main menu is displayed.

3. You can scroll through the menu by pressing

Ö or Ñ. Scroll to the desired item by

pressing Ö or Ñ, and press á to select the item.

•

If the item has a sub-menu I, it will be displayed. Select the sub-menu item. If the sub-menu I item has the sub-menu II, it will be displayed. Select the submenu II item.

4. You can then select the desired setting.

5. To save the setting, press the soft key ().

•When programming is complete, a conﬁrmation

tone sounds. The display will return to the main menu or the sub-menu I or the sub-menu II (if the function item is in the sub-menu I or in the submenu II). You can continue programming other items. To exit the menu, press (SNOOZE/ALARM) or (OFF).

Useful information:

•You can go back to the previous display by pressing Ü except when entering

characters or numbers. To return to the main menu from the sub-menu

or sub-

, press Ü.

•

You can exit the programming mode any time by pressing (SNOOZE/ALARM) or (OFF).

•If you do not press any buttons for 60 seconds, the handset will exit the

programming mode.

SAVE

FUNCTION

Save directory

Ringer setting

Date and time

---------------

Save directory

Ringer setting

AUG.10

11:30AM

FUNCTION

ALARM

Ex. Incoming Call Tone setting

SAVE

Incoming call

tone :2

Preparation

For assistance, please call: 1-800-211-PANA(7262)

Function Menu Table

The main menu is displayed ﬁrst. Menu items will vary depending on which base unit model (KX-TG2700/KX-TG2720/KX-TG2730/KX-TG2740) this handset is registered to.

Save directory

p. 32

p. 11

Ringer setting

Date and time

Copy directory

Initial setting

p. 16

p. 18

p. 47

Ringer volume

Ringer tone

Incoming call

p. 38

Copy 1 item

p. 39

Copy all items

p. 16

Auto talk

p. 44

Room monitor

p. 30

Caller ID edit

Set tel line

Registration

p. 48

Line selection

Set flash time

p. 19

LCD contrast

p. 20

LCD backlight

p. 55

Set line mode

Set answering

p. 57

Number of rings

p. 56

Recording time

p. 57

Remote code

p. 58

Set mailbox2&3

Set base unit

p. 53

Incoming call

p. 53

p. 54

Room monitor

p. 63

HS registration

p. 62

Deregistration

Main menu Sub-menu I Sub-menu II

(for Handset)

Voice mail

p. 60

VM tone detect

p. 59

Save VM access#

Line selection

(for KX-TG2720)

LCD setting

(for KX-TG2730)

(for KX-TG2700/KX-TG2720)

(for KX-TG2700/

KX-TG2720/KX-TG2730)

(for KX-TG2720/KX-TG2740)

* These items are programmed within the system.

p. 54

Set dial mode

Programmable Settings

Auto Talk Feature

The Auto Talk feature allows you to answer a call by lifting the handset off the charger without pressing or . If you want to use this feature, turn the feature ON. Your phone comes from the factory set to OFF.

Make sure the handset is not being used.

Press (SNOOZE/ALARM).

•

You can also press (CONF/FUNCTION) to directly enter the function menu and go to step 3.

Within 5 seconds, press the soft key ().

Scroll to “Initial setting” by pressing

Ö or Ñ, and press á.

Scroll to “Auto talk” by pressing Ö or

Ñ, and press á.

•The current setting is displayed.

Select “On” or “Off” by pressing Ö or Ñ.

Press the soft key ( ).

•A beep sounds.

•To exit the programming mode, press (SNOOZE/ALARM) or (OFF).

•You can exit the programming mode any time by pressing (SNOOZE/ALARM) or

(OFF)

•In order to view Caller ID information after you lift up the handset to answer a call,

leave the Auto Talk feature OFF.

Ringer Volume

You can program the ringer volume to HIGH, MEDIUM, LOW or OFF. Your phone comes from the factory set to HIGH. For KX-TG2700/KX-TG2730 users:

If set to OFF, the handset will not ring for external calls, and for internal calls it will ring at the LOW level.

For KX-TG2720/KX-TG2740 users: You can select the ringer volume for each line. If set to OFF, the handset will not ring for the line(s). The ringer volume for internal calls follows the higher level of the two lines. When the ringer volume is off for both lines, the handset will ring at the LOW level for internal calls.

SAVE

FUNCTION

Copy directory

Initial setting

---------------

Save directory

Ringer setting

LCD setting

Auto talk

Room monitor

AUG.10

11:30AM

FUNCTION

ALARM

Auto talk

:Off

SAVE

Make sure the handset is not being used.

Press (SNOOZE/ALARM).

•

You can also press (CONF/FUNCTION) to directly enter the function menu and go to step 3.

Within 5 seconds, press the soft key ().

Scroll to “Ringer setting” by pressing Ö or Ñ, and press á.

Press á at “Ringer volume”.

For KX-TG2700/KX-TG2730 users: Go to step 6.

For KX-TG2720/KX-TG2740 users: Press Ö (Line 1) or Ñ (Line 2) to select the line.

Select the desired volume by pressing Ö or Ñ.

•Each time you press Ö or Ñ, the

volume will change and ring.

•To turn the ringer OFF:

press Ö repeatedly until “Off ?” is displayed.

Press the soft key ( ).

•A beep sounds.

To turn the ringer ON:

Press Ñ in step 6, and press the soft key ().

•The ringer will sound at the LOW level.

•

You can exit the programming mode any time by pressing (SNOOZE/ALARM)

(OFF)

•You can also select the ringer volume while an external call is being received.

Press Ö or Ñ while the handset is just ringing.

SAVE

FUNCTION

Preparation

For assistance, please call: 1-800-211-PANA(7262)

Save directory

Ringer setting

Date and time

---------------

Ringer volume

Ringer tone

---------------

Save directory

Ringer setting

Ringer volume

=Line1F=Line2

For KX-TG2720/ KX-TG2740 users

AUG.10

11:30AM

FUNCTION

ALARM

HIGH

MEDIUM

OFF

Ringer volume

Low High

Ringer volume

Low High

Ringer volume

RingerOff ?

LOW

SAVE

Ringer volume

Low High

Ex. Registered to KX-TG2700/KX-TG2730

Programmable Settings

Ringer Tone

You can select the ringer tone out of 6 patterns. When an external call is being received, the handset rings in the selected tone. For KX-TG2700/KX-TG2730 users: The ringer tone is preset to “1”. For KX-TG2720/KX-TG2740 users: Line 1 is preset to “1” and Line 2 is preset to “2”.

Make sure the handset is not being used.

Press (SNOOZE/ALARM).

•

You can also press (CONF/FUNCTION) to directly enter the function menu and go to step 3.

Within 5 seconds, press the soft key ().

Scroll to “Ringer setting” by pressing

Ö or Ñ, and press á.

Scroll to “Ringer tone” by pressing Ö or

Ñ, and press á.

For KX-TG2700/KX-TG2730 users: Go to step 6.

For KX-TG2720/KX-TG2740 users: Press Ö (Line 1) or Ñ (Line 2) to select the line.

Select the desired ringer tone by pressing

Ö or Ñ.

•

Each time you press Ö or Ñ, the tone will change and ring. If the ringer volume has been set to OFF, the handset will not ring (p. 16).

•You can also select the ringer tone by pressing

the dialing button (1) to (6).

Press the soft key ( ).

•A beep sounds.

•To exit the programming mode, press (SNOOZE/ALARM) or (OFF).

•

You can exit the programming mode any time by pressing (SNOOZE/ALARM) or (OFF)

•You cannot change the ringer tone for internal calls.

SAVE

FUNCTION

---------------

Save directory

Ringer setting

Save directory

Ringer setting

Date and time

Ringer volume

Ringer tone

Incoming call

For KX-TG2720/ KX-TG2740 users

Ringer tone

=Line1F=Line2

SAVE

Ringer tone

AUG.10

11:30AM

FUNCTION

ALARM

Ex. Registered to KX-TG2700/KX-TG2730

Preparation

For assistance, please call: 1-800-211-PANA(7262)

LCD Contrast

You can program the handset LCD contrast (6 levels). Your phone comes from the factory set to level 3.

Make sure the handset is not being used.

Press (SNOOZE/ALARM).

•

You can also press (CONF/FUNCTION) to directly enter the function menu and go to step 3.

Within 5 seconds, press the soft key ().

Scroll to “Initial setting” by pressing

Ö or Ñ, and press á.

Press á at “LCD setting”.

Press á at “LCD contrast”.

Select the desired contrast by pressing Ö or Ñ.

•Each time you press Ö or Ñ, the LCD

contrast will change.

•The number of steps shows the LCD contrast level.

Press the soft key ( ).

•A beep sounds.

•To exit the programming mode, press

(SNOOZE/ALARM) or (OFF).

•You can exit the programming mode any time by pressing (SNOOZE/ALARM) or (OFF)

SAVE

FUNCTION

---------------

LCD setting

Auto talk

---------------

LCD contrast

LCD backlight

LCD contrast

Low High

LCD contrast

Low High

Level 6

Level 4

Level 1

Copy directory

Initial setting

---------------

Save directory

Ringer setting

SAVE

LCD contrast

Low High

AUG.10

11:30AM

FUNCTION

ALARM

Programmable Settings

LCD Backlight

To keep the display lit on the handset while the unit is not in use (standby mode) and it is charging, turn the LCD backlight mode ON.

Your phone

comes from the factory set to

OFF.

Make sure the handset is not being used.

Press (SNOOZE/ALARM).

•You can also press (CONF/FUNCTION) to

directly enter the function menu and go to step 3.

Within 5 seconds, press the soft key ().

Scroll to “Initial setting” by pressing

Ö or Ñ, and press á.

Press á at “LCD setting”.

Scroll to “LCD backlight” by pressing Ö or Ñ, and press á.

Select “On” or “Off” by pressing Ö or Ñ.

Press the soft key ( ).

•A beep sounds.

•To exit the programming mode, press

(SNOOZE/ALARM) or (OFF).

•You can exit the programming mode any time by pressing (SNOOZE/ALARM) or (OFF)

•Regardless of the LCD backlight mode setting, the display will light for a few seconds if any button is pressed or if the handset is lifted from the charger. Then the backlight will go out (p. 24).

SAVE

FUNCTION

---------------

Save directory

Ringer setting

Copy directory

Initial setting

---------------

LCD setting

Auto talk

LCD contrast

LCD backlight

---------------

SAVE

LCD backlight

:Off

AUG.10

11:30AM

FUNCTION

ALARM

Basic Operation

For assistance, please call: 1-800-211-PANA(7262)For assistance, please call: 1-800-211-PANA(7262)

For KX-TG2700/KX-TG2730 users

Press .

(The TALK indicator lights and

“Talk” is displayed.)

Dial a phone number, using the dialing buttons.

•The dialed number is displayed.

•After a few seconds, the display will show the

length of the call.

When the other party answers, talk into the microphone.

To hang up, press if using the speakerphone, or press

(OFF)

Off 00-01-08

Making Calls

*Line soft keys ( and

) are operative only for KX-TG2720/KX-TG2740 users.

LINE2

LINE1

Ex. Speakerphone mode

SP-phone

=Booster

PRIVACY

[2]

IN USE

MUTE

PRIVACY

-T

CONF

FLASH

OFF

TALK

PAUSE

and TALK Indicator

Microphone

(OFF)

(PAUSE/REDIAL)

, , ,

Display

Soft Key ( )*

LINE2

Dialing Buttons

Soft Key ( )*

LINE1

(HOLD/CLEAR)

SP-phone 00-00-00

=Booster

CALL WAIT

SP-phone

1112222

+ 47 hidden pages