Panasonic KX-TGA271B, KX-TGA271V User Manual

2.4GHz Expandable Cordless Handset

Model No.

KX-TGA271B/KX-TGA271V/KX-TGA271W

Installation Manual

PLEASE READ BEFORE USE AND SAVE.

This handset is an accessory cordless handset, for use with Panasonic base units KX-TG2700/KX-TG2720/KX-TG2730/KX-TG2740/KX-TG2750/KX-TG2770/KX-FPG381. This installation manual only describes the steps necessary to start up the handset. Please read the KX-TG2700/KX-TG2720/KX-TG2730/KX-TG2740/KX-TG2750/ KX-TG2770/KX-FPG381 operating instructions for further details.

Accessories (included) For extra orders, call 1-800-332-5368.

Charger Unit ...................................one

Charger

AC Adaptor

Order No.

Order No. KX-TCA1-G (KX-TCA1)

PQLV30014XB (Black) PQLV30014ZW (White)

Handset Cover................................one

Order No. PQKK10130Y3 (Black)

PQKK10130Y2 (Violet) PQKK10130Y1 (White)

Installation!

Connecting the Charger unit

AC Adaptor

Power Outlet (AC 120 V, 60 Hz)

Battery ...............................one

Order No. N4HHGMB00001

or N4HHGMB00005 (HHR-P103)

Belt Clip .............................one

Order No.

PQKE10349Z2 (Black) PQKE10349Z1 (White)

•USE ONLY WITH Panasonic AC ADAPTOR KX-TCA1 (Order No. KX-TCA1-G).

•The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.)

Installing the battery

Insert the battery into the handset as shown, matching the correct polarity (#). Press the battery down until it places into the compartment ($). Close the cover.

For assistance, please call: 1-800-211-PANA(7262)

– 1 –

PQQX13372XB-BM S0402-5053

Charging the battery

O K

[-] Press MUTE on base unit, then OK on handset to register handset

Place the handset on the charger and charge for about 15 hours before initial use.

• The CHARGE indicator lights, a beep sounds and “Charging” will be displayed.

• Recharge the battery when:

– “

Recharge battery” is displayed,

– “ ” flashes on the display, or – the handset beeps intermittently while it is in use.

•

If the battery has been discharged, the handset will display “Charge for 15HRS” and “ ” when you place the handset on the charger. The handset will not work. Keep charging.

Charge Contacts

Handset battery information

CHARGE Indicator

After your Panasonic battery is fully charged:

Operation Operating time

While in use (TALK)

While not in use (Standby)

While using the Reception Booster feature

Up to 3.5 hours Up to 7 days Up to 2.7 hours

When using the 2-Way Radio mode with the battery fully charged:

Operation Operating time

While in use (TALK)

While not in use (Standby)

• Clean the charge contacts of the handset and the charger with a soft, dry cloth

once a month. Clean more often if the unit is subject to grease, dust or high humidity. Otherwise the battery may not charge properly.

Up to 3.5 hours Up to 9 hours

Belt Clip!

You can hang the handset on your belt or pocket using the belt clip.

To attach the belt clip

To remove the belt clip

While pressing the top of the clip (A), pull the right edge in the direction of the arrow (B).

– 2 –

Registration!

O K

[-] Press MUTE on base unit, then OK on handset to register handset

This cordless handset must be registered to a KX-TG2700/KX-TG2720/ KX-TG2730/KX-TG2740/KX-TG2750/KX-TG2770/KX-FPG381 base unit. The handset will be assigned the extension number at registration. Only one handset can be registered at a time.

Make sure the base unit and the other handsets are not being used. Registration must be completed within 1 minute.

Soft key ( )

(MUTE) Button and Indicator

•The illustration of the base unit is the KX-TG2730.

The handset display shows the instructions as shown on the right.

Base unit: Press (MUTE).

•The MUTE indicator light flashes.

•On the KX-FPG381, “HS REGISTRATION” is

displayed.

Handset:

#Press the right soft key ( ).

$Wait until a long beep sounds and the display

shows the registered number. The registration will be then complete.

PRIVACY

Press MUTE on base unit, then OK on handset to register handset

PRIVACY

[-]

Handset

Registering

Ex. Extension number 2

PRIVACY

[2]

Handset [2]

Registered

•The registered number “[1]” to “[8]” is shown on the top right of the display.

•

You can stop registration by pressing (OFF) on the handset and pressing (MUTE) on the base unit.

To cancel the handset registration, please see the KX-TG2700/KX-TG2720/ KX-TG2730/KX-TG2740/KX-TG2750/KX-TG2770/KX-FPG381 Operating

Instructions.

For assistance, please call: 1-800-211-PANA(7262)

– 3 –

+ 7 hidden pages