TG78xx_(en)_QG.fm Page 1 Monday, December 10, 2012 7:20 PM
Model No. KX-TG7841/KX-TG7842/KX-TG7843
KX-TG7844/KX-TG7845/KX-TG365SK
KX-TG7871/KX-TG7872/KX-TG7873
Quick Guide
KX-TG7874/KX-TG7875/KX-TG385SK
Connections
Base unit for KX-TG7841 series
L Use only the supplied Panasonic AC adaptor PNLV226.
Press plug
firmly.
“Click”
Correct Incorrect
*DSL/ADSL filter (not supplied) is required if you have DSL/ADSL service.
Hook
To single-line
telephone jack
(RJ11C)
DSL/ADSL filter*
“Click”
To power
outlet
Base unit for KX-TG7871 series
L Use only the supplied Panasonic AC adaptor PNLV234.
“Click”“Click”
To single-line
telephone jack
(RJ11C)
DSL/ADSL filter*
*DSL/ADSL filter (not supplied) is required if you have DSL/ADSL service.
Printed in China
“Click”
To power
outlet
PNQW3431ZA TT1212MG1122 (E)
TG78xx_(en)_QG.fm Page 2 Monday, December 10, 2012 7:20 PM
Connections
Charger
Battery installation/Battery charging
Charge for about 7 hours.
Rechargeable Ni-MH ONLY
Note:
L USE ONLY Ni-MH batteries AAA (R03) size.
L Do NOT use Alkaline/Manganese/Ni-Cd batteries.
L Confirm correct polarities (S, T).
To power outlet
Confirm
is displayed.
“Charging”
– 2 –
TG78xx_(en)_QG.fm Page 3 Monday, December 10, 2012 7:20 PM
Operating tips
Soft keys
This unit features soft keys. By pressing a soft key, you can select the feature shown directly above
it on the display. Pay attention to the display to see what functions the soft keys are assigned
during operation.
Navigator key
Handset:
− {^}, {V}, {<}, or {>}: Scroll through various lists and items.
− ? (Volume: {^} or {V}): Adjust the receiver or speaker volume while talking.
− {<} C: View the phonebook entry.
− {>} REDIAL: View the redial list.
− {V} CID (Caller ID): View the caller list.
Base unit:
− {^}, {V}, {7}, or {8}: Scroll through various lists and items.
− VOL. (Volume: {^} or {V}): Adjust the speaker volume while talking.
− {7}/{8}: Repeat/skip messages during playback.
Handset
Base unit
Volume up
{^}
{<}{>}
{V}
Volume down
Volume up
{^}
{7}{8}
{V}
Volume down
Date and time (Handset)
1 {MENU}(1)1
2 Enter the current month, date, and year. s {OK}
3 Enter the current hour and minute (12-hour clock format).
4 *: Select “AM” or “PM”. s {SAVE} s {OFF}
Recording your greeting message for the answering system
for the landline (Handset)
If you use a pre-recorded greeting message, you do not need to record your own greeting
message.
1 {MENU}(3)2 s {r}: “Yes” s {SELECT}
2 After a beep sounds, hold the handset about 20 cm (8 inches) away and speak clearly into
the microphone (2 minutes max.).
3 Press {STOP} to stop recording. s {OFF}
– 3 –