Panasonic KX-T2373FX User Manual

Integrated Telephone System

Model No.

KX-T2373FXW

Pulse-or-tone dialing capability

Operating Instructions

PLEASE READ BEFORE USE AND SAVE.

Preparation Basic Operation Advanced Operation

Useful Information

PQQX13327ZA-BM-105.6.66:12PMページ1

Before Initial Use

2

Thank you for purchasing your new Panasonic integrated
telephone.

Accessories

(included)

∑ Handset . . . . . . . . . . . . . . . one

(p. 5)

∑ Telephone Line Cord . . . . . one

(p. 5)

∑ Handset Cord. . . . . . . . . . . one

(p. 5)

∑ Wall Mounting Adaptor . . . . one

(p. 9)

For your future reference

Serial No. Date of purchase

(found on the bottom of the unit)

Name and address of dealer

PQQX13327ZA-BM-105.6.66:12PMページ2

Location of Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Installing the Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Connecting the Handset/Telephone Line Cord . . . . . . . . . . . . . 15

Connecting a Communication Device . . . . . . . . . . . . . . . . . . . . 16

Programming Summary of Preparations . . . . . . . . . . . . . . . . . . 17

Selecting the Dialing Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Selecting the Ringer Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Wall Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Making Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Answering Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Speed Dialer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Storing Phone Numbers in Memory. . . . . . . . . . . . . . . . . . . . . . 12

Dialing a Stored Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

One-Touch Dialer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Storing Phone Numbers in Memory. . . . . . . . . . . . . . . . . . . . . . 14

Dialing a Stored Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Special Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

For Call Waiting Service Users . . . . . . . . . . . . . . . . . . . . . . . . . 17

Temporary Tone Dialing

(For Rotary or Pulse Service Users) . . . . . . . . . . . . . . . . . . . . 17

How to Use the PAUSE Button

(For Analog PBX Line/Long Distance Service Users) . . . . . . . 17

Muting Your Conversation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Turning Music Played During the Hold ON/OFF . . . . . . . . . . . . 18

FLASH Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Setting the PIN Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Dial Lock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Call Restriction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Using the Optional Headset. . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Battery Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Before Requesting Help. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

3

Preparation Basic Operation Advanced Operation

Useful Information

Contents

Preparation

Basic Operation

Advanced Operation

Useful Information

PQQX13327ZA-BM-105.6.66:12PMページ3

4

Location of Controls

ABC

DEF

JKL

MNO

GHI

TUV

WXYZ

PQRS

PAUSE

REDIAL

FLASH

HOLD

VOLUMEVOLUME

MUTEMUTE

PROGRAM

MIC

S

P

-

P

H

O

N

E

DIAL LOCKDIAL LOCK

AUTO/AUTO/

LOWERLOWER

(TONE) Button (p. 17)

(FLASH) Button (p. 17, 19)

VOLUME

(_) (^)

Buttons (p. 10)

RINGER Selector (p. 8)

(PROGRAM) Button (p. 7, 12)

(PAUSE) Button (p. 17)

(REDIAL) Button (p. 10)

One-Touch Auto
Dial Buttons (p. 14)

(DIAL\LOCK) Button (p. 21)

(AUTO/LOWER)

Button (p. 12, 15)

(HOLD) Button (p. 11)

MIC (Microphone)
(p. 10, 11)

(MUTE) Button and Indicator

(p. 7, 18)

(SP-PHONE/HEADSET) Button and Indicator (p. 10, 11, 24)

Headset Jack (p. 23)

Ringer Indicator (p. 11)

EMERGENCYEMERGENCY

TONE

HEADSETHEADSET

IT

S

PQQX13327ZA-BM-205.6.66:12PMページ4

Preparation

5

Settings

“

≥Use only a Panasonic Handset for the KX-T2373FXW.

Connecting the Handset/Telephone Line
Cord

After connection, lift the handset to check for a dial tone.

To Single-Line
Telephone Jack

Handset Cord

Handset

Telephone Line
Cord

1. Press down in the direction of the
arrow and remove the cover.

2. Install the batteries in the proper
order as shown, matching the
correct polarity.

3. Close the battery cover.

Installing the Batteries

+

-

-

+

+

-

1

2

≥Batteries are not included in the unit.
≥Install three high quality “LR6” Alkaline or “R6” Manganese batteries. We

recommend to use Alkaline batteries.
Battery life is: —about six months in use of Alkaline batteries.

—about three months in use of Manganese batteries.

≥Battery life may depend on usage conditions and ambient temperature.

≥Make sure to install the batteries for the following features to operate properly:

≥—Buttons’ function when the handset is on the cradle
≥—Speakerphone (p. 10, 11)
≥—Programming (p. 7)

PQQX13327ZA-BM-205.6.66:12PMページ5

LINE

DATA

≥Computer
≥Modem
≥Fax
≥Answering machine

To Single-Line
Telephone Jack

Connecting a Communication Device

If you connect a communication device (computer, modem, fax,
answering machine, etc.) to the telephone line, you can connect it through
this unit using the DATA jack.

After connecting the handset and telephone line cord (p. 5), connect the
communication device telephone line cord to the DATA jack.

≥Make sure the communication device is not in use before using this unit (making

calls, storing phone numbers in memory etc.) or the communication device may
not operate properly.

6

“

Settings

PQQX13327ZA-BM-205.6.66:12PMページ6

LINE

DATA

7

Preparation

“

Programming Summary of Preparations

You can program the following functions. See the corresponding pages
for function details.

Make sure that a call is not put on hold.

Press (MUTE).

Press (PROGRAM) to store the setting.

Press (PROGRAM).

≥To set the call restriction, press (1). (page 22)
≥To change the flash time, press (2). (page 19)
≥To select the dialing mode, press (3). (page 8)
≥To turn on/off music played during the hold, press (4).

(page 18)

≥To change the PIN code for the dial lock and call restriction,

press (5). (page 20)

≥You can exit the programming mode any time by pressing (PROGRAM).
≥If you do not press any buttons for 60 seconds, the unit will return to the standby

mode.

PQQX13327ZA-BM-205.6.66:12PMページ7

8

Selecting the Dialing Mode

You can select the dialing mode by programming. If you have touch tone
service, set to “Tone”. If rotary or pulse service is used, set to “Pulse”.
Your phone comes from the factory set to “Tone”.

Make sure that a call is not put on hold.

1

Press (PROGRAM).

≥The MUTE indicator flashes.

2

Press (MUTE).

3

Press (3).

4

To select “Pulse”, press (2).
or
To select “Tone”, press (1).

5

Press (PROGRAM).

≥A long beep sounds.
≥The MUTE indicator light goes out.
≥The unit will return to the standby mode.

“

Settings

RINGER Selector:

Set to HIGH, LOW or
OFF.
≥When set to OFF, the

unit will not ring.

HIGH

RINGER

OFF

LOW

Selecting the Ringer Volume

You can select the ringer volume to HIGH, LOW or OFF. Your phone
comes from the factory set to HIGH.

(PROGRAM)

(MUTE) and Indicator

PQQX13327ZA-BM-205.6.66:12PMページ8

9

Preparation

Wall Template

8.3 cm

To temporarily set the handset
down during a conversation,
place it as shown here.

Wall Mounting

This unit can be mounted on a wall.

1

Pull down the handset hook until it locks,
so the tab holds the handset.

2

Tuck the telephone line cord inside
the wall mounting adaptor, and
push it in the direction of the arrow.

≥“UP” should be facing upward.

3

Install screws using the wall
template below. Connect the
telephone line cord. Mount the
unit, and slide down.

Screws

8.3 cm

To Single-Line
Telephone Jack

PQQX13327ZA-BM-205.6.66:12PMページ9

During speakerphone operation

For best performance, please note the following:

≥Talk alternately with the other party in a quiet room.
≥If the other party has difficulty hearing you, press VOLUME (_) to decrease

the speaker volume.

≥You can switch to the handset by lifting it up. To switch back to the

speakerphone, press (SP-PHONE/HEADSET).

10

Using the speakerphone

1

Press (SP-PHONE/HEADSET).

≥The indicator lights.

2

Dial a phone number.

≥If you misdial, press

(SP-PHONE/HEADSET) and
start again from step 1.

3

When the other party
answers, talk into the MIC
(microphone).

4

To hang up, press

(SP-PHONE/HEADSET).

≥The indicator light goes out.

To redial the last number dialed

Using the handset: Lift the handset ¤ press (REDIAL).
Using the speakerphone: Press (SP-PHONE/HEADSET) ¤ press (REDIAL).

Making Calls

You can make a call by simply lifting the handset. To hang up, place the
handset on the cradle.

VOLUME (_), (^)

(HOLD)

(REDIAL)

MIC

(SP-PHONE/HEADSET)
and Indicator

Automatic Redial:

When using the speakerphone, the unit redials the last dialed number up to
15 times within a 10-minute period if the line is busy. During redial, the
SP-PHONE/HEADSET indicator light flashes.

To adjust the handset volume (4 levels) or the speaker
volume (8 levels) while talking

To increase, press VOLUME (^).
To decrease, press VOLUME (_).

PQQX13327ZA-BM-305.6.66:21PMページ10

11

Basic Operation

Answering Calls

While a call is being received, the unit rings and the ringer indicator
flashes. You can answer it by simply lifting the handset.

Using the speakerphone

1

Press (SP-PHONE/HEADSET).

≥The indicator lights.

2

Talk into the MIC
(microphone).

3

To hang up, press

(SP-PHONE/HEADSET).

≥The indicator light goes out.

≥When the ringer volume is set to OFF (p. 8), the unit will not ring.
≥The Ringer indicator will flash when

≥—a telephone number is dialed in PULSE mode, or
≥—someone picks up or hangs up another phone connected to the same phone

line.

≥This is normal.

MIC

Ringer Indicator

(SP-PHONE/HEADSET) and Indicator

To put a call on hold

Press (HOLD).

≥The SP-PHONE/HEADSET indicator light flashes.
≥If using the handset, you can place it on the cradle.
≥During the hold, the caller will hear music. For canceling music, see page 18.

To release the hold

If the handset is on the cradle, lift the handset.
If the handset is off the cradle, press (HOLD).
If using the speakerphone, press (SP-PHONE/HEADSET).

≥If another phone is connected on the same line, you can also release the hold by

lifting its handset.

PQQX13327ZA-BM-305.6.66:21PMページ11

12

Speed Dialer

Storing Phone Numbers in Memory

You can store up to 10 phone numbers in memory. The dialing buttons
((0) to (9)) function as memory stations. Do not press any memory stations
before storing to prevent misoperation.

Make sure that a call is not put on hold.

1

Press (PROGRAM).

≥The MUTE indicator

flashes.

2

Enter a phone number,
up to 22 digits.

≥If you enter a wrong

number, press
(PROGRAM) and start
again from step 1.

3

Press (AUTO/LOWER).

4

Press a memory station
number ((0) to (9)).

≥A long beep sounds.
≥The MUTE indicator light goes

out.

≥The unit will return to the standby

mode.

≥If 3 beeps sound, the number

entered in step 2 may be over 22
digits. Lift the handset and place
it on the cradle to return to the
standby mode, and start again
from step 1.

≥You can exit the programming mode in step 1 and 2 by pressing (PROGRAM).
≥If a pause is required for dialing, press (PAUSE) where needed. Pressing

(PAUSE) counts as one digit (p. 17).

PQQX13327ZA-BM-405.6.66:14PMページ12

(PROGRAM)

Memory Station
Numbers

(SP-PHONE/HEADSET)
and Indicator

(AUTO/LOWER)

(PAUSE)

Advanced Operation

13

To erase a stored number

1

Press (PROGRAM).

≥The MUTE indicator flashes.

2

Press (AUTO/LOWER).

3

Press a memory station number ((0) to (9)) for the phone number to
be erased.

≥A long beep sounds.
≥The MUTE indicator light goes out.
≥The unit will return to the standby mode.

Dialing a Stored Number

1

Lift the handset or press (SP-PHONE/HEADSET).

2

Press (AUTO/LOWER).

3

Press the memory station number ((0) to (9)).

≥The stored number is dialed.

PQQX13327ZA-BM-405.6.66:14PMページ13

Storing Phone Numbers in Memory

You can store up to 20 phone numbers in the one-touch auto dial buttons
(10 numbers in UPPER memory locations, 10 numbers in LOWER
memory locations).

Make sure that a call is not put on hold.

To store in an UPPER memory location

It is recommended that you program an emergency number in the
EMERGENCY button.

1

Press (PROGRAM).

≥The MUTE indicator

flashes.

2

Enter a phone number,
up to 22 digits.

≥If you enter a wrong

number, press
(PROGRAM) and start
again from step 1.

3

Press one of the one­touch auto dial buttons.

≥A long beep sounds.
≥The MUTE indicator light

goes out.

≥The unit will return to the

standby mode.

≥If 3 beeps sound, the

number entered in step 2 may be
over 22 digits. Press
(PROGRAM) to return to the
standby mode and start again
from step 1.

≥If a pause is required for dialing, press (PAUSE) where needed. Pressing

(PAUSE) counts as one digit (p. 17).

≥When using the Dial Lock (p. 21) or Call Restriction feature (p. 22), you cannot

store a phone number in the EMERGENCY button.

14

One-Touch Dialer

Do not press any one-touch auto dial buttons before storing to prevent
misoperation.

PQQX13327ZA-BM-405.6.66:14PMページ14

One-touch auto dial buttons

(EMERGENCY)

(PROGRAM)

(SP-PHONE/HEADSET) and Indicator

(AUTO/LOWER)

(PAUSE)

Advanced Operation

15

To store in a LOWER memory location

1

Press (PROGRAM).

≥The MUTE indicator flashes.

2

Enter a phone number, up to 22 digits.

≥If you enter a wrong number, press (PROGRAM) and start again from

step 1.

3

Press (AUTO/LOWER).

4

Press one of the one-touch auto dial buttons.

≥A long beep sounds.
≥The MUTE indicator light goes out.
≥The unit will return to the standby mode.
≥If 3 beeps sound, the number entered in step 2 may be over 22 digits. Lift

the handset and place it on the cradle to return to the standby mode, and
start again from step 1.

≥If a pause is required for dialing, press (PAUSE) where needed. Pressing

(PAUSE) counts as one digit (p. 17).

To erase a stored number

1

Press (PROGRAM).

≥The MUTE indicator flashes.

2

If the phone number is in an UPPER memory location, press the
one-touch auto dial button for the phone number to be erased.
OR
If the phone number is in a LOWER memory location, press

(AUTO/LOWER), then press the one-touch auto dial button for the

phone number to be erased.

≥A long beep sounds.
≥The MUTE indicator light goes out.
≥The unit will return to the standby mode.

≥When using the Dial Lock (p. 21) or Call Restriction feature (p. 22), you cannot

erase a phone number in the EMERGENCY button.

“

PQQX13327ZA-BM-405.6.66:14PMページ15

16

“

One-Touch Dialer

Dialing a Stored Number

From an UPPER memory location:

1

Lift the handset or press (SP-PHONE/HEADSET).

2

Press the required one-touch auto dial button.

≥The stored number is dialed.

OR

From a LOWER memory location:

1

Lift the handset or press (SP-PHONE/HEADSET).

2

Press (AUTO/LOWER).

3

Press the required one-touch auto dial button.

≥The stored number is dialed.

Memory card

Remove the memory card and use it as a name or phone number index
for the stored numbers.

Cover

Memory Card

PQQX13327ZA-BM-405.6.66:14PMページ16

Advanced Operation

17

For Call Waiting Service Users

Press (FLASH) if you hear a call-waiting tone while talking.

≥The first call is put on hold and you can answer the second call.
≥To return to the first caller, press (FLASH) again.
≥If this function does not operate properly, consult your telephone company.

Temporary Tone Dialing

(For Rotary or Pulse Service Users)

Press (TONE) before entering access numbers which require tone dialing.

≥The dialing mode changes to tone. You can enter numbers to access an

answering service, electronic banking service, etc. When you hang up, the mode
will return to pulse.

How to Use the PAUSE Button

(For Analog PBX Line/Long Distance Service Users)

We recommend you press (PAUSE) if a pause is required for dialing with a
PBX or to access a long distance service.

Ex. Line access number (9) (PBX)

(9)

¤ (PAUSE) ¤

≥Pressing (PAUSE) once creates a few seconds pause.

This prevents misdialing when you redial or dial a stored number.

≥Pressing (PAUSE) more than once increases the length of the pause between

numbers.

Phone number

(MUTE)

(TONE)

(FLASH)

(PAUSE)

(DIAL\LOCK)

(PROGRAM)

Special Features

“

PQQX13327ZA-BM-405.6.66:14PMページ17

18

“

Special Features

Muting Your Conversation

Press (MUTE) while talking.

≥The MUTE indicator lights.
≥The other party cannot hear you but you can hear them.
≥To resume the conversation, press (MUTE) again.

Turning Music Played During the Hold
ON/OFF

You can turn ON/OFF playing music during the hold as follows.
Your phone comes from the factory set to ON.

Make sure that a call is not put on hold.

1

Press (PROGRAM).

≥The MUTE indicator flashes.

2

Press (MUTE).

3

Press (4).

4

To turn OFF, press (2).
OR
To turn ON, press (1).

5

Press (PROGRAM).

≥A long beep sounds.
≥The MUTE indicator light goes out.
≥The unit will return to the standby mode.

(PROGRAM)

(MUTE) and Indicator

PQQX13327ZA-BM-405.6.66:14PMページ18

Advanced Operation

19

“

FLASH Button

Pressing (FLASH) allows you to use special features of your host PBX
such as transferring an extension call or accessing special telephone
services (optional) such as call waiting.

Selecting the flash time

The flash time depends on your telephone exchange or host PBX. You
can select the following flash times: “80, 90, 100, 110, 200, 250, 300, 400,
600, 700 ms (milliseconds)”. Your phone comes from the factory set to
“100 ms”.

Make sure that a call is not put on hold.

1

Press (PROGRAM).

≥The MUTE indicator flashes.

2

Press (MUTE).

3

Press (2).

4

Press a dialing button ((1) to (0)).

(1) : 80 ms (2) : 90 ms (3) : 100 ms (4) : 110 ms
(5) : 200 ms (6) : 250 ms (7) : 300 ms (8) : 400 ms
(9) : 600 ms (0) : 700 ms

5

Press (PROGRAM).

≥A long beep sounds.
≥The MUTE indicator light goes out.
≥The unit will return to the standby mode.

≥If the unit is connected via a PBX, you may not use PBX functions (transferring a

call, etc.) properly. Consult your PBX supplier for the correct setting.

(PROGRAM)

(MUTE) and Indicator

PQQX13327ZA-BM-405.6.66:14PMページ19

20

“

Special Features

Please write down your PIN code. If you forget your PIN code, consult your
nearest Panasonic service center.

Setting the PIN Code

A 4-digit PIN Code (Personal Identification Number) prevents
unauthorized persons from using your unit. The PIN Code is required for
the dial lock and call restriction to be set or canceled. The factory preset
PIN code is “1111”.

Make sure that a call is not put on hold.

1

Press (PROGRAM).

≥The MUTE indicator flashes.

2

Press (MUTE).

3

Press (5).

4

Enter the current PIN code.

5

Press (PROGRAM).

≥If a correct PIN code is entered, a beep will sound.
≥If a wrong PIN code is entered, 3 beeps will sound. Enter the correct PIN

code and press (PROGRAM).

≥To return to the standby mode, lift the handset and hang up.

6

Enter a new PIN code using a 4-digit number.

7

Press (PROGRAM).

≥A long beep sounds.
≥The MUTE indicator light goes out.
≥The unit will return to the standby mode.

(PROGRAM)

(MUTE) and Indicator

PQQX13327ZA-BM-405.6.66:14PMページ20

Advanced Operation

21

“

To cancel the dial lock

Follow steps 1 through 3 above again.

You can use the following features while the dialing buttons are locked.
≥Dialing a number you programmed into the memory of the EMERGENCY

button (p. 16)

≥Adjusting the handset and speakerphone volumes (p. 10)
≥Muting the conversation (p. 18)
≥Answering the second call by pressing (FLASH) (p. 17)

To set the dial lock

1

Press (DIAL\LOCK).

≥The MUTE indicator flashes.

2

Enter the PIN code (p. 20).

3

Press (PROGRAM).

≥A long beep sounds.
≥If a wrong PIN code is entered, 3 beeps will sound. Enter a correct PIN

code and press (PROGRAM).

≥The MUTE indicator light goes out.
≥The unit will return to the standby mode.

Dial Lock

You can prevent others from making a call to any number except the one
pre-programmed in the memory of the EMERGENCY button. Once you
locked the dialing buttons, even emergency numbers cannot be dialed.
Only incoming calls are accepted until the dial lock is canceled.

Before using this feature, we recommend
storing an emergency number in the memory
of the EMERGENCY button (p. 14). Even if
the dialing buttons are locked, the number
stored in the button can be dialed.

≥If you choose not to program emergency

numbers, but plan to use the dial lock, any
number programmed into the EMERGENCY button can be accessed.

PQQX13327ZA-BM-405.6.66:14PMページ21

(EMERGENCY)

“

Special Features

22

Call Restriction

You can prevent the unit from dialing phone numbers beginning with
specified digit(s) (1 digit or 2 digits). Phone numbers with the restricted
leading digits cannot be dialed out.

To set the call restriction

Make sure that a call is not put on hold.

1

Press (PROGRAM).

≥The MUTE indicator flashes.

2

Press (MUTE).

3

Press (1).

≥If you use “1111” as a PIN code

(factory set), there is no need to
enter a PIN code. Go to step 6.

4

Enter the PIN code (p. 20).

5

Press (PROGRAM).

≥If a wrong PIN code is entered, 3 beeps will sound. Enter a correct PIN

code and press (PROGRAM).

6

Enter the number(s) (1 digit or 2 digits) you want to restrict ((0) to (9)).

≥If you enter a wrong number, press ($) and enter a correct number.
≥To change restricted digits from 2 digits to 1 digit, press ($) and enter 1 digit.

7

Press (PROGRAM).

≥A long beep sounds.
≥The MUTE indicator light goes out.

≥The unit will return to the standby mode.

≥If your unit is connected to a PBX, this function may not operate. Contact your

PBX supplier for more information.

To cancel the call restriction

Follow steps 1 through 5. In step 6, press ($) to cancel call restriction and
press (PROGRAM).

≥A long beep will sound and the unit will return to the standby mode.

(PROGRAM)

(MUTE) and Indicator

PQQX13327ZA-BM-405.6.66:14PMページ22

23

Useful Information

Plugging the optional headset into the unit allows a hands-free phone
conversation. Please use only a Panasonic KX-TCA89EX.

Connecting the Optional Headset to the Unit

Connect the optional headset to the headset jack as shown below.

If you want to have a normal conversation, disconnect the headset.

Hook

Using the Optional Headset

“

PQQX13327ZA-BM-505.6.66:14PMページ23

Headset Jack

“

Using the Optional Headset

24

1

Press (SP-PHONE/HEADSET) to make or answer a call.

≥The SP-PHONE/HEADSET indicator flashes.
≥If you misdial when making a call, press (SP-PHONE/HEADSET) twice and

dial again.

2

To hang up, press (SP-PHONE/HEADSET).

≥The indicator light goes out.

To adjust the headset receiver volume (4 levels):
While using the headset, press VOLUME (_) or (^).

≥During a conversation using the headset, you cannot switch the call to the

handset by lifting it off the cradle.

≥If you disconnect the optional headset during a conversation with the handset on

the cradle, the call will be switched to the speakerphone.

≥During a conversation using the speakerphone, you can switch the call to the

headset by connecting the headset.

VOLUME (_), (^)

(SP-PHONE/HEADSET) and Indicator

Making/Answering Calls

Make sure to install the batteries.

PQQX13327ZA-BM-505.6.66:14PMページ24

25

Useful Information

Battery Replacement

If the speakerphone does not work, it may be the time to replace the
batteries. Replace the batteries within 1 minute to keep the programmed
settings.

Battery Precautions:

The batteries should be used correctly, otherwise the unit may be damaged by
battery leakage.
—Do not mix different types of batteries.
—Do not charge, short-circuit, disassemble, heat or dispose of in fire.
—Remove all the batteries when replacing.

Note:

—Replace all the batteries once a half year in use of Alkaline batteries, or

misoperation may occur. (When you use Manganese batteries, replace all of
them once in three months.)

—Do not use nickel-cadmium batteries.

+

-

-

+

+

-

1

2

1

Disconnect the telephone line cord
from the unit.

2

Press down in the direction of the
arrow and remove the cover.

3

Replace the batteries with new ones
using correct polarity (i, j), and
close the cover.

4

Connect the telephone line cord to
the unit.

PQQX13327ZA-BM-505.6.66:14PMページ25

26

Before Requesting Help

Problem

The unit does not work.

The unit does not ring.

You cannot dial.

The other party suddenly
cannot hear your voice
during a conversation.

You cannot program items
such as the dialing mode.

You cannot store a phone
number in memory.

While programming, the
unit starts to ring and stops
the program.

You cannot redial by
pressing (REDIAL).

Previously programmed
information is erased.

Remedy

≥Check the settings (p. 5–9).
≥Remove the batteries and reinstall

them to reset the unit.

≥The RINGER selector is set to OFF.

Set to HIGH or LOW (p. 8).

≥Check that the dialing mode selection

is correct (p. 8).

≥Dial lock mode is set. To cancel the

mode, see page 21.

≥The dialed number is restricted. To

cancel, see page 22.

≥(MUTE) may have been pressed during

the conversation. Press (MUTE).

≥Programming is not possible when a

call is put on hold.

≥Do not pause for over 60 seconds

while programming.

≥Programming is not possible when a

call is put on hold.

≥Check that the batteries are installed in

the unit and that the battery power is
not low.

≥Do not enter a phone number more

than 22 digits long.

≥When using the Dial Lock (p. 21) or

Call Restriction feature (p. 22), you
cannot store a phone number in the
EMERGENCY button.

≥To answer the call, lift the handset or

press (SP-PHONE/HEADSET). Start
again from the beginning after hanging
up.

≥If the last number dialed was more

than 32 digits long, the number will not
be redialed correctly.

≥If the batteries installed in the unit

expire, programmed information may
be erased. After the batteries are
replaced, reprogram if necessary.

PQQX13327ZA-BM-505.6.66:14PMページ26

27

Useful Information

Safety Instructions

Take special care to follow the safety suggestions listed below.

Installations
Environment

1) Do not use this unit near water—for example, near a bathtub, washbowl, sink,
etc. Damp basements should also be avoided.

2) The unit should be kept away from heat sources such as radiators, kitchen
range, etc. It also should not be placed in rooms where the temperature is less
than 5oC or greater than 40oC.

Placement

1) Do not place heavy objects on top of this unit.

2) Care should be taken so that objects do not fall onto, and liquids are not spilled
into, the unit. Do not subject this unit to excessive smoke, dust, mechanical
vibration or shock.

3) Place the unit on a flat surface.

CAUTION:

To reduce the risk of fire or injury to persons, read and follow these instructions.

11. Use only the battery(ies) specified.

12. Do not dispose of the battery(ies) in a fire. It (they) may explode.

13. Do not open or mutilate the battery(ies). Released electrolyte is corrosive and

may cause burns or injury to the eyes or skin. The electrolyte may be toxic if
swallowed.

14. Exercise care in handling the battery(ies) in order not to short the battery(ies)

to conductive materials such as rings, bracelets, and keys. The battery(ies)
and/or conductor may overheat and cause burns.

15. Do not recharge the battery(ies) provided with or identified for use with this

product. The battery(ies) may leak corrosive electrolyte or explode.

16. Do not attempt to rejuvenate the battery(ies) provided with or identified for use

with this product by heating. Sudden release of battery electrolyte may occur
causing burns or irritation to the eyes or skin.

17. Replace all batteries at the same time. Mixing fresh and discharged batteries

could increase internal cell pressure and rupture the discharged batteries.
(Applies to products employing more than one separately replaceable primary
battery.)

18. When installing batteries observe the proper polarity or direction. Incorrect

installation can cause charging, and may result in leakage or explosion.
(Applies to products employing more than one separately replaceable primary
battery.)

19. Remove the battery(ies) from this product if the product will not be used for a

long period of time (several months or more). During this time the battery(ies)
could leak in the product.

10. Discard the “dead” battery(ies) as soon as possible. The “dead” battery(ies)

may leak in the product.

11. Do not store this product, or the battery(ies) provided with or identified for use

with this product, in high temperature areas. Batteries that are stored in a
freezer or refrigerator for the purpose of extending shelf life should be
protected from condensation during storage and defrosting. Batteries should
be stabilized at room temperature prior to use after cold storage.

PQQX13327ZA-BM-505.6.66:14PMページ27

Kyushu Matsushita Electric Co., Ltd.

Manufactured by Kyushu Matsushita Electric (Malaysia) Sdn. Bhd. Johor
Malaysia

PQQX13327ZA-BM

F1201-0 D

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT
TO RAIN OR ANY TYPE OF MOISTURE.

If there is any trouble, disconnect the unit from the telephone line and connect a
known working phone. If the known working phone operates properly, do not
reconnect the unit to the telephone line until the trouble has been repaired. If the
known working phone does not operate properly, consult your telephone
company.

PQQX13327ZA-BM-505.6.66:14PMページ28