Panasonic KX-PW501DL, KX-PW501DW User Manual

Quick Reference Guide

Facsimile

Model No.

Table of Contents

Finding the controls ……………………………………………………………2 Installations and connections …………………………………………………4 Setting the date and time ………………………………………………………7 Setting your facsimile telephone number ……………………………………7 Setting your logo…………………………………………………………………8 Character input and command key table ……………………………………9 Automatic dialing on the main unit……………………………………………10 Automatic dialing on the portable handset …………………………………12 Intercom between the main unit and portable handset ……………………14 Sending faxes …………………………………………………………………15 Receiving faxes ………………………………………………………………16 Operating the built-in answering device ……………………………………17 Specifications …………………………………………………………………19

Thank you for purchasing a Panasonic facsimile.

●

This guide explains some basic features and operations, but not all of them. For further details, see the Japanese operating instructions.

●

This product is designed for use in Japan. Panasonic cannot provide service for this product if used outside Japan.

●

Any details given in this guide are subject to change without notice.

KX-PW501DL

KX-PW501DL KX-PW501DW

Finding the controls

Main unit (control panel)

1112

1415

Voice select button adjusts the receiver

tone quality.

Set button Volume/Redial/Phonebook key

To adjust the volume.

To redial the phone numbers in the redial list. The last 10 phone numbers dialed are stored in memory.

To use the phonebook.

Flash button (For call waiting service users.)

Clear button Erase button Hold button Call Memory button starts a search in

the Number Display log. (For caller ID display service users.)

Auto Answer button & indicator —light on: answering device activated. —light off: used as a regular telephone.

Pause button Replay button plays back recorded

messages.

Record button records telephone calls. Stop button Copy button starts copying. Start/Fax button starts faxing. Monitor button Intercom/Character Input Mode button Tone button switches to tone dialing. Function button initiates programming. Edit button Resolution button selects the resolution

when faxing or copying.

One-touch dial buttons Liquid crystal display

Finding the controls

Portable handset



●



For call waiting service users.

●



To use the one-touch dial.

●



To use the speakerphone.

LCD (with back light)

Earpiece

Microphone

Do not cover the microphone while talking.



●



Displays battery strength, telephone numbers etc.

Portable handset number



●



To adjust the volume.

●



To change Hiragana into Kanji.

●



To redial the phone numbers in the redial list. The last 10 phone numbers dialed are stored in memory.

●



To use the phonebook.



How to use key

機能

子機

圏外

留守



Function menu that is controlled by or .

Battery strength

Indicates which directions the

key can be tilted.

up and down

left

Out of range (Walk closer to the main unit.)

Note:



●



If you use the portable handset near a microwave oven which is being used, noise may be heard from the earpiece or the speaker. Move away from the microwave oven and closer to the main unit.



How to use buttons

and buttons refer to the function displayed on the bottom of the display. They function differently depending on the mode.

Sharp button

Dial buttons



Tone button



●



To switch to Tone dialing mode.



●



To make/answer calls.

●



To page the main unit or another portable handset.

●



To clear letters/numbers.

●



To end a call.

●



To end or exit from editing or other operations.

●



To put a call on hold.

●



To start a search in the Number Display log. (For caller ID display service users.)

Voice select button

●



To adjust the receiver tone quality.

Installations and connections

Installing the ink film

2 Insert the ink film.

1 Open the control panel and the back cover.

押す

Click

開く

Open the control

panel until it locks.

3 If the ink film is slack, tighten it by winding the “T”

shaped gear.

4 Close the back cover and the control panel until they

lock.

●

When the unit runs out of ink film, the following message will be displayed.

Install a new ink film.

・

As of December 2003.

・

Tax not included.

Replacement ink film:

KX-FAN142 (35 m) ¥1250

Open the back cover

until it locks.

Press here.

Find the “T” shaped gear (blue).

Ink film

Blue core

Insert the “T” shaped gear (blue) into the left slot of the main unit.

Insert the white core into the slots.

Insert the blue core into the right slot of the main unit.

Click

To close the back cover, press here.

Close the control panel until it locks.

Do not

be slacken.

ﾌｨﾙﾑｶﾞｼﾅｸﾅﾘﾏｼﾀﾋﾝﾊﾞﾝ

KX-FAN142

ﾌｨﾙﾑｶﾞｼﾅｸﾅﾘﾏｼﾀｺｳｶﾝｼﾃｸﾀﾞｻｲｼ

U23

Installations and connections

Installing recording paper

(A4

size)

3 Install the recording paper cover on the recording

paper tray by sliding it down from the top.

Recording paper cover

Recording paper tray

Printing

side is on

the back



Fan the stack of recording paper (A4 size).

Insert the recording paper into the recording paper tray. (Up to 30 sheets)

Close the paper entrance cover by leaning it back.

2 Insert the recording paper into the recording paper tray.

Open the paper entrance cover until it locks.

1 Install the recording paper tray.

Separate the recording paper cover from the

recording paper tray.

Insert the left tab on the recording paper tray into

the left slot of the main unit.

Insert the right tab into the right slot of the main unit.

Recording

paper tray

Tab

Slot

Recording

paper cover

Recording

paper tray

●

To add paper

Remove the

recording paper

cover, then follow

steps 2 to 3.

Connecting the main unit

Installations and connections

3 Charge the battery in the charger for 10 hours.

Plug

Charger

AC adaptor

Power outlet (AC 100 V)

Connector

Battery

Battery cover

Click

Black

Red

Setting up the portable handset

●

After your Panasonic battery is fully charged, it will last up to about 7 hours of conversation.

Power cord

Telephone line cord

Wall jack

Power outlet (AC 100V)

3 Connect the power

cord.

2 Connect the telephone line

cord (Supplied accessory).

Click

停電用電話機

回線

（電話回線へ）

Click

Handset

Click

After the Power On...

This unit will automatically select the dialing

mode (Tone/Pulse).

充電中

充電完了

●

While charging.

●

Charging completed.

+ 14 hidden pages