Installation Guide
Home Network System
Backup Battery
Model No. KX-HNP100
Thank you for purchasing a Panasonic product.
This document explains how to install the backup battery properly. For details about how to use the system, refer to the User’s Guide (page 15).
Please read this document before using the unit and save it for future reference.
For assistance, please contact us at 1-800-272-7033 or visit our Web site: http://shop.panasonic.com/support for customers in the U.S.A.
Please register your product: http://shop.panasonic.com/support
In order to use this device:
R Download the latest version of the [Home Network] app.
R Update your hub to the latest firmware version (version 5.50 or later). For more information, refer to the User’s Guide (page 15).
Printed in China
|
|
|
|
|
|
|
|
|
|
|
|
|
|
HNP100 _ (en _ en) _ 0202 _ ver.202.pdf |
1 |
|
2017/02/02 |
|
11:02:29 |
|
|
|
|
|
|
|
|
Introduction |
|
...................Customer services |
18 |
Accessory information ............... |
3 |
Limited Warranty (ONLY FOR |
|
Other information ....................... |
3 |
U.S.A.) ..................................... |
19 |
Important Information |
|
|
|
About this system ...................... |
4 |
|
|
For your safety ........................... |
4 |
|
|
Important safety instructions ...... |
6 |
|
|
For best performance ................ |
6 |
|
|
Other information ....................... |
7 |
|
|
General product |
|
|
|
information |
|
|
|
General information about the |
|
|
|
backup battery ........................... |
8 |
|
|
Power outage notification by |
|
|
|
phone ......................................... |
8 |
|
|
Power outage notification to your |
|
|
|
mobile device ............................. |
9 |
|
|
Wireless communication |
|
|
|
range ......................................... |
9 |
|
|
Setup |
|
|
|
Part names and functions ........ |
10 |
|
|
LED indicator ........................... |
10 |
|
|
Setup overview ........................ |
11 |
|
|
Inserting the battery ................. |
11 |
|
|
Connections ............................. |
12 |
|
|
Registering the backup |
|
|
|
battery ...................................... |
14 |
|
|
Appendix |
|
|
|
Features available when using the |
|
|
|
[Home Network] app ................ |
15 |
|
|
Accessing the User’s Guide .... |
15 |
|
|
Specifications .......................... |
16 |
|
|
FCC and other information ...... |
17 |
|
|
|
|
|
|
|
|
|
|
2
|
|
|
|
|
|
|
|
|
|
|
|
|
|
HNP100 _ (en _ en) _ 0202 _ ver.202.pdf |
2 |
|
2017/02/02 |
|
11:02:30 |
|
|
|
|
|
|
|
|
|
|
Introduction |
|
|
|
|
|
|
|
|
|
Accessory information |
|
|
|
|
|
|
|
Supplied accessories |
|
|
|
No. |
Accessory item/Part number |
|
Quantity |
A |
Rechargeable battery*1 |
|
1 |
*1 See page 3 for replacement battery information.
A
Additional/replacement accessories
Please contact your nearest Panasonic dealer for sales information (page 18).
Accessory item |
Model no./Specifications |
Rechargeable |
KX-PRA10EX |
battery |
R Lithium Ion (Li-Ion) type battery |
|
R To order, please visit |
|
http://shop.panasonic.com/support |
|
|
|
|
|
|
RDesign and specifications are subject to change without notice.
RThe illustrations in these instructions may vary slightly from the actual product.
Trademarks
RiPhone and iPad are registered trademarks of Apple Inc.
RAndroid is a trademark of Google Inc.
RMicrosoft, Windows, and Internet Explorer are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
RWi-Fi® is a registered trademark of Wi-Fi Alliance®.
RAll other trademarks identified herein are the property of their respective owners.
For assistance, please visit http://shop.panasonic.com/support |
3 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
HNP100 _ (en _ en) _ 0202 _ ver.202.pdf |
3 |
|
2017/02/02 |
|
11:02:30 |
|
|
|
|
|
|
|
|
RThis system is an auxiliary system; it is not designed to provide complete protection from property loss.
Panasonic will not be held responsible in the event that property loss occurs while this system is in operation.
RThe system’s wireless features are subject to interference, therefore functionality in all situations cannot be guaranteed. Panasonic will not be held responsible for injury or damage to property that occurs in the event of wireless communication error or failure.
To prevent severe injury and loss of life/ property, read this section carefully before using the product to ensure proper and safe operation of your product.
WARNING
Power connection
RUse only the power source marked on the product.
RDisconnect the product from power outlets if it emits smoke, an abnormal smell, or makes an unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped emitting and contact us at http://shop.panasonic.com/support
RDisconnect from power outlets and never touch the inside of the product
if its casing has been broken open. Danger of electric shock exists.
RNever touch the plug with wet hands. Danger of electric shock exists.
RDo not connect non-specified devices.
RDo not leave the power cable exposed outdoors.
Installation
RTo prevent the risk of fire or electrical shock, do not expose the product to rain or any type of moisture.
RDo not place or use this product near automatically controlled devices such as automatic doors and fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident.
RDo not allow the AC adaptor to be excessively pulled, bent or placed under heavy objects.
Operating safeguards
RBefore opening the cover, disconnect the product from the power outlet and from the connected device.
RBefore cleaning, disconnect the product from the power outlet and from the connected device, and then remove the battery. Do not use liquid or aerosol cleansers when cleaning.
RDo not disassemble the product.
RNever put metal objects inside the product. If metal objects enter the product, turn off the circuit breaker and contact an authorized service center.
4For assistance, please visit http://shop.panasonic.com/support
|
|
|
|
|
|
|
|
|
|
|
|
|
|
HNP100 _ (en _ en) _ 0202 _ ver.202.pdf |
4 |
|
2017/02/02 |
|
11:02:30 |
|
|
|
|
|
|
|
|
Important Information
Medical
RConsult the manufacturer of any personal medical devices, such as pacemakers or hearing aids, to determine if they are adequately shielded from external RF (radio frequency) energy. DECT features operate between 1.92 GHz and 1.93 GHz with a peak transmission power of 115 mW.
RDo not use the product in health care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
Lithium Ion (Li-Ion) battery
RDo not open, puncture, crush, or drop the battery. A damaged battery must not be used. This can result in the risk of fire, explosion, overheating, and leaking of the electrolyte.
RDo not touch the terminals and
with metal objects.
RRisk of explosion if battery is replaced by an incorrect type. Dispose of used battery according to local regulations.
RIf any electrolyte should come into contact with your hands or clothes, wash it off thoroughly with water.
RIf any electrolyte should come into contact with your eyes, never rub your eyes. Rinse your eyes thoroughly with water, and then consult a doctor.
CAUTION
Installation and location
RNever install wiring during a lightning storm.
RThe AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near the product and is easily accessible.
RTo avoid the risk of strangulation, keep the product and the AC adaptor cord at least 1 m (3 feet) from a child’s crib and out of the reach of small children.
Lithium Ion (Li-Ion) battery
RUse only the specified battery.
RInsert the battery correctly.
RDo not leave the battery in an automobile exposed to direct sunlight for a long period of time with the doors and windows closed.
RRemove the battery if you do not use the product for a long period of time. Keep it in a cool, dark area.
RDo not replace a battery with wet hands.
RStop using the battery immediately and keep away from fire if it emits an abnormal smell or leaks electrolyte. Released electrolyte may cause fire or burns.
RExercise care when handling the batteries. Do not allow conductive materials such as rings, bracelets, or keys to touch the batteries, otherwise a short circuit may cause the batteries and/or the conductive material to overheat and cause burns.
RDo not put any conductive materials such as coins or hairpins onto the
For assistance, please visit http://shop.panasonic.com/support |
5 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
HNP100 _ (en _ en) _ 0202 _ ver.202.pdf |
5 |
|
2017/02/02 |
|
11:02:30 |
|
|
|
|
|
|
|
|
Important Information
battery terminals. This can result in the risk of overheating.
RCharge the battery provided with or identified for use with this product only, in accordance with the instructions and limitations specified in this manual.
Attention:
The lithium ion/polymer battery you have purchased is recyclable. Please call 1-800-8-BATTERY (1-800-822-8837) for information on how to recycle this battery.
When using your product, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
1.Do not use this product near water for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement or near a swimming pool.
2.Use only the batteries indicated in this document. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions.
SAVE THESE INSTRUCTIONS
Hub location/avoiding noise
The hub and other compatible Panasonic devices use radio waves to communicate with each other.
RFor maximum coverage and noise-free communications, place your hub:
–at a convenient, high, and central location with no obstructions between the product and hub in an indoor environment.
–away from electronic appliances such as TVs, radios, personal computers, wireless devices, or other phones.
–facing away from radio frequency transmitters, such as external antennas of mobile phone cell stations. (Avoid putting the hub on a bay window or near a window.)
RIf the reception for a hub location is not satisfactory, move the hub to another location for better reception.
Environment
RKeep the product away from electrical noise generating devices, such as fluorescent lamps and motors.
RThe product should be kept free from excessive smoke, dust, high temperature, and vibration.
RThe product should not be exposed to direct sunlight.
RDo not place heavy objects on top of the product.
RThe product should be kept away from heat sources such as heaters, kitchen stoves, etc. It should not be placed in rooms where the
6For assistance, please visit http://shop.panasonic.com/support
|
|
|
|
|
|
|
|
|
|
|
|
|
|
HNP100 _ (en _ en) _ 0202 _ ver.202.pdf |
6 |
|
2017/02/02 |
|
11:02:30 |
|
|
|
|
|
|
|
|
Important Information
temperature is less than 5 °C (41 °F) |
Notice: |
||||||||
or greater than 40 °C (104 °F). |
|||||||||
|
|
|
|
|
|
|
|
||
Damp basements should also be |
|
|
|
|
|
|
|
|
|
avoided. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
R Operating the product near electrical |
|
|
|
|
|
|
|
|
|
appliances may cause interference. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
Move away from the electrical |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
appliances. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
Routine care
R Wipe the outer surface of the product with a soft moist cloth.
R Do not use benzine, thinner, or any abrasive powder.
For assistance, please visit http://shop.panasonic.com/support |
7 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
HNP100 _ (en _ en) _ 0202 _ ver.202.pdf |
7 |
|
2017/02/02 |
|
11:02:30 |
|
|
|
|
|
|
|
|
The backup battery can provide power to your Home Network System devices (one device per backup battery), allowing your devices to continue to operate in the event of a power outage. Instead of connecting an AC adaptor to your hub, camera, etc., the backup battery is connected to your device and is also connected to the power outlet. During normal operation, the backup battery uses power from the power outlet to charge the battery and to supply power to the connected device. In the event of a power outage, the device is powered by the backup battery only.
You can register the backup battery to the hub and take advantage of other features, but note that the backup battery does not need to be registered in order for it to supply power to the connected device in the event of a power outage.
Backup battery performance
When the supplied battery is installed in the backup battery, you can expect the following operating time in the event of a power outage.
Compatible |
Operating time*2 |
devices*1 |
|
Hub |
1.5 hours (standby, |
(KX-HNB600) |
connected to 4 |
|
cameras, not |
|
connected to a |
|
Wi-Fi® network) |
Compatible |
Operating time*2 |
devices*1 |
|
Indoor |
|
Camera |
2.0 hours (standby) |
(KX-HNC210) |
1.5 hours (standby, |
Outdoor |
when night vision |
Camera |
mode is active) |
(KX-HNC600) |
|
Indoor Siren |
7 hours (standby) |
(KX-HNS105) |
|
*1 At the time of printing. Additional compatible devices may become available at a later date.
*2 All times are approximate.
In the event of a power outage, the backup battery can trigger the hub to call a pre-programmed phone number and notify you of the power outage. In order to use this feature, the following items are required.
–The hub must be connected to your landline (refer to the System Setup Guide included with the hub).
–The backup battery must be registered to the hub (page 14).
–You must use the [Home Network] app to program the phone number that will be called in the event of a power outage. For more information, refer to the User’s Guide
(page 15).
–The hub must be able to make calls using your landline even if there is a power outage. If your landline phone service requires a modem or other device to make phone calls (typically this is the case for landline phone
8For assistance, please visit http://shop.panasonic.com/support
|
|
|
|
|
|
|
|
|
|
|
|
|
|
HNP100 _ (en _ en) _ 0202 _ ver.202.pdf |
8 |
|
2017/02/02 |
|
11:02:30 |
|
|
|
|
|
|
|
|
General product information
service provided by cable company, Internet service provider, VoIP service provider, etc.), and if that device does not contain its own backup battery, the hub will not be able to make calls in the event of a power outage.
In the event of a power outage, the backup battery can trigger the hub to send a notification to the [Home Network] app. In order to use this feature, the following items are required.
–The backup battery must be registered to the hub (page 14).
–You must use the [Home Network] app to enable the desired notifications. For more information, refer to the User’s Guide
(page 15).
–To receive power outage notifications, the hub must be able to access the Internet even if there is a power outage. This means that your wireless router and any other devices that are used when accessing the Internet (cable modem, network hubs, etc.) must also have their own backup power supplies*1, otherwise the hub cannot send notifications to the [Home Network] app in the event of a
power outage.
*1 The KX-HNP100 Backup Battery cannot supply power to these devices. A third-party backup power supply is required.
The wireless communication range of each device in the system from the hub is approximately 50 m (160 feet) indoors and approximately 300 m (1,000 feet) outdoors. Wireless communication may be unreliable when the following obstacles are located between the hub and other devices.
–Metal doors or screens
–Walls containing aluminum-sheet insulation
–Walls made of concrete or corrugated iron
–Double-pane glass windows
–Multiple walls
–When using each device on separate floors or in different buildings
Note:
RThe LED indicator lights in red if it is out of range of the hub. In this case, confirm all connections, including those of the hub.
For assistance, please visit http://shop.panasonic.com/support |
9 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
HNP100 _ (en _ en) _ 0202 _ ver.202.pdf |
9 |
|
2017/02/02 |
|
11:02:30 |
|
|
|
|
|
|
|
|
A |
D |
|
|
B |
|
C |
|
|
E |
Power supply plug LED indicator Battery cover
DC jack
MN
Used to register the backup battery to the hub.
You can use the LED indicator to confirm the backup battery’s status.
Indicator |
Status |
|
Off |
The battery is fully |
|
|
charged |
|
Green, lit |
Battery power is |
|
|
being consumed |
|
Green, |
Registration mode |
|
blinking slowly |
(you pressed and |
|
|
held M |
N) |
Red, lit |
Backup battery is |
|
|
out of range of the |
|
|
hub |
|
Red, blinking |
No battery, or |
|
slowly |
device error |
|
Amber, lit |
Battery is charging |
Note:
RThe backup battery consumes battery power whenever it is not connected to the power outlet. To keep the backup battery charged and ready with the maximum amount of backup power, we recommend you keep it connected to a power outlet at all times.
RWhen the battery operating time seems to be shorter, even after I fully charged the battery:
–Clean the battery ends (,
) and the charge contacts with a dry cloth and charge again.
–It is time to replace the battery.
10 For assistance, please visit http://shop.panasonic.com/support
|
|
|
|
|
|
|
|
|
|
|
|
|
|
HNP100 _ (en _ en) _ 0202 _ ver.202.pdf |
10 |
|
2017/02/02 |
|
11:02:30 |
|
|
|
|
|
|
|
|
Setup
1Initial setup
Make sure you can access the system using your mobile device. For details, refer to the System Setup Guide included with your hub.
2Insert the battery
The battery will supply power to the connected device in the event of a power outage.
3Connections
Connect the backup battery to the power outlet and to the device it will supply power to.
4Registration
Register each of your backup batteries to the hub if you want to receive notifications in the event of a power outage. Note that this step is not required if the backup battery was purchased as part of a bundle.
R USE ONLY the specified battery.
R Wipe the battery ends (,
) with a dry cloth.
R Avoid touching the battery ends (,
) or the unit contacts.
1
2
3
4
1Press the notch (A) on the battery cover firmly.
2Slide it in the direction of the arrow (B).
3Insert the battery (C).
4Close the battery cover (D).
For assistance, please visit http://shop.panasonic.com/support 11
|
|
|
|
|
|
|
|
|
|
|
|
|
|
HNP100 _ (en _ en) _ 0202 _ ver.202.pdf |
11 |
|
2017/02/02 |
|
11:02:30 |
|
|
|
|
|
|
|
|