Panasonic kx-hnk102 Operation Manual

Operating Instructions

Home Network System

Keychain Remote

Model No. KX-HNK102

Thank you for purchasing a Panasonic product.

This document explains how to operate the keychain remote properly. For details about how to use the system, refer to the User’s Guide (page 12).

Please read this document before using the unit and save it for future reference. For assistance, please contact us at 1-800-272-7033 or visit our Web

site: http://shop.panasonic.com/support for customers in the U.S.A.

Please register your product: http://shop.panasonic.com/support

In order to use this device:

R Download the latest version of the [Home Network] app. R Update your hub to the latest firmware version

(version 5.50 or later).

For more information, refer to the User’s Guide (page 12).

Printed in China

HNK102_(en_en)_0619_ver.031.pdf 1 2015/06/19 20:30:06

Important Information

Accessory information ...............3

About this system ......................4

For your safety ...........................

Important safety instructions ......5

For best performance ................5

Other information .......................6

Setup

Part names and functions ..........8

LED indicator .............................8

Setup overview ..........................9

Inserting the battery .................10

Attaching the key ring ..............10

Registering the remote ............11

Wireless communication

range .......................................11

Appendix

Using the remote .....................12

Features available when using the

[Home Network] app ................12

Accessing the User’s Guide ....12

Specifications ..........................13

FCC and other information ......14

Customer services ...................15

Limited Warranty (ONLY FOR

U.S.A.) .....................................16

Table of Contents

HNK102_(en_en)_0619_ver.031.pdf 2 2015/06/19 20:30:06

Accessory information

Supplied accessories

No. Accessory item/Part number Quantity

Battery

B Key ring/PNGX1035Z 1

*1 When replacing the battery, refer to the battery specifications noted under

“

Power source” on page 13.

Other information

R D

esign and specifications are subject to change without notice.

R The illustrations in these instructions may vary slightly from the actual product.

Trademarks

R iPhone and iPad are registered trademarks of Apple Inc. R Android is a trademark of Google Inc. R Microsoft, Windows, and Internet Explorer are either registered trademarks or

trademarks of Microsoft Corporation in the United States and/or other countries.

R All other trademarks identified herein are the property of their respective owners.

For a

ssistance, please visit http://shop.panasonic.com/support

Important Information

HNK102_(en_en)_0619_ver.031.pdf 3 2015/06/19 20:30:06

About this system

R This system is an auxiliary system; it

is not designed to provide complete protection from property loss. Panasonic will not be held responsible in the event that property loss occurs while this system is in operation.

R The system’s wireless features are

subject to interference, therefore functionality in all situations cannot be guaranteed. Panasonic will not be held responsible for injury or damage to property that occurs in the event of wireless communication error or failure.

For your safety

o prevent severe injury and loss of life/ property, read this section carefully before using the product to ensure proper and safe operation of your product.

WARNING

Power connection

R U

se only the power source marked

on the product.

R Do not connect non-specified

devices.

Installation

R T

o prevent the risk of fire or electrical shock, do not expose the product to rain or any type of moisture.

R Do not place or use this product

near automatically controlled

devices such as automatic doors a

nd fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident.

Operating safeguards

R D

o not disassemble the product.

Medical

R C

onsult the manufacturer of any personal medical devices, such as pacemakers or hearing aids, to determine if they are adequately shielded from external RF (radio frequency) energy. DECT features operate between 1.92 GHz and

1.93 GHz with a peak transmission power of 115 mW.

R Do not use the product in health

care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.

CR Lithium battery

R D

o not recharge, disassemble, remodel, heat or throw it into fire.

R Do not touch the terminals

and

with metal objects.

R R

isk of explosion if battery is replaced by an incorrect type. Dispose of used battery according to local regulations.

R If any electrolyte should come into

contact with your hands or clothes, wash it off thoroughly with water.

R If any electrolyte should come into

contact with your eyes, never rub your eyes. Rinse your eyes

For a

ssistance, please visit http://shop.panasonic.com/support

Important Information

HNK102_(en_en)_0619_ver.031.pdf 4 2015/06/19 20:30:06

thoroughly with water, and then c

onsult a doctor.

CAUTION

CR Lithium battery

R U

se only the battery noted on

page 3.

R Insert the battery correctly. R Do not leave the battery in an

automobile exposed to direct sunlight for a long period of time with the doors and windows closed.

R Remove the battery if you do not

use the product for a long period of time. Keep it in a cool, dark area.

R Do not replace a battery with wet

hands.

R Keep out of the reach of small

children. There is a risk of swallowing. If the battery is swallowed, seek medical attention immediately.

R Remove the battery if it becomes

unusable. There is a risk of leakage, overheating, and rupture. Do not attempt to use a battery if it is leaking.

R Exercise care when handling the

batteries. Do not allow conductive materials such as rings, bracelets, or keys to touch the batteries, otherwise a short circuit may cause the batteries and/or the conductive material to overheat and cause burns. Do not intentionally pour water on the battery or allow it to get wet. There is a risk of fire and smoke. If the battery becomes wet, remove it immediately and contact an authorized service center.

Important safety instructions

When using your product, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

1. Do not use this product near water for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement or near a swimming pool.

2. Use only the batteries indicated in this document. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions.

SAVE THESE INSTRUCTIONS

For b

est performance

Hub location/avoiding noise

he hub and other compatible Panasonic devices use radio waves to communicate with each other. R For maximum coverage and

noise-free communications, place your hub: – at a convenient, high, and central

location with no obstructions between the product and hub in an indoor environment.

– away from electronic appliances

such as TVs, radios, personal computers, wireless devices, or other phones.

– facing away from radio frequency

transmitters, such as external

For a

ssistance, please visit http://shop.panasonic.com/support

Important Information

HNK102_(en_en)_0619_ver.031.pdf 5 2015/06/19 20:30:06

antennas of mobile phone cell s

tations. (Avoid putting the hub on a bay window or near a window.)

R If the reception for a hub location is

not satisfactory, move the hub to another location for better reception.

Environment

R K

eep the product away from electrical noise generating devices, such as fluorescent lamps and motors.

R The product should be kept free

from excessive smoke, dust, high temperature, and vibration.

R The product should not be exposed

to direct sunlight.

R Do not place heavy objects on top of

the product.

R The product should be kept away

from heat sources such as heaters, kitchen stoves, etc. It should not be placed in rooms where the temperature is less than 0 °C (32 °F) or greater than 40 °C (104 °F).

R Operating the product near electrical

appliances may cause interference. Move away from the electrical appliances.

Other information

AUTION: Risk of explosion if battery

is replaced by an incorrect type. Dispose of used batteries according to the instructions.

Routine care

R W

ipe the outer surface of the

product with a soft moist cloth.

R Do not use benzine, thinner, or any

abrasive powder.

Information on Disposal in other Countries outside the European Union

These symbols are only valid in the E

uropean Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal.

Note for the battery removal p

rocedure

Refer to “Inserting the battery” on page 10.

For a

ssistance, please visit http://shop.panasonic.com/support

Important Information

HNK102_(en_en)_0619_ver.031.pdf 6 2015/06/19 20:30:06

Notice

For a

ssistance, please visit http://shop.panasonic.com/support

Important Information

HNK102_(en_en)_0619_ver.031.pdf 7 2015/06/19 20:30:06

Part names and functions

n Front view

A B

Rear view

LED indicator

(Arm: Away) button

rms the alarm system using the

[Arm: Away] mode.

(disarm) button

isarms the alarm system.

(smart) button

sed to turn on a smart plug, trigger the alarm system, etc. Battery cover lock Battery cover

M N

sed to register the keychain remote to the hub. Key ring eyelet Key ring

LED indicator

You can use the LED indicator to confirm the remote’s status.

Indicator Status

Off Normal operation or

o power

Amber, b

linking

quickly

Signal is being sent to the hub (you are pressing a button)

Red, lit [Arm: Away]

mode selected (you pressed the arm button)

Green, lit [Disarm]

mode selected (you pressed the disarm button), or you pressed the smart button

For a

ssistance, please visit http://shop.panasonic.com/support

Setup

HNK102_(en_en)_0619_ver.031.pdf 8 2015/06/19 20:30:06

Indicator Status

Red, blinking Remote is out of

ange of the hub, or could not communicate with the hub

Green, b

linking slowly

Registration mode (you pressed and held M

Repeating p

attern of blinking green and blinking red

Low battery

*1 The LED lights for about 2

econds after a button is pressed, then turns off. If the LED indicator does not light when you press a button, the battery must be replaced.

*2 The LED indicator does not

indicate remote’s status if the remote has not been registered (page 11).

Setup overview

1 I

nitial setup

Make sure you can access the system using your mobile device. For details, refer to the System Setup Guide included with your hub.

2 Insert the battery

The remote is battery powered.

3 Registration

Required only if the remote was purchased separately (i.e., not as part of a bundle).

4 C

onfirm the usage area

Read the information in this document to confirm that the desired usage area is suitable to proper operation.

For a

ssistance, please visit http://shop.panasonic.com/support

Setup

HNK102_(en_en)_0619_ver.031.pdf 9 2015/06/19 20:30:06

+ 19 hidden pages