Panasonic KX-HNA101AZ User Manual
Installation Guide
Home Network System
Smart Plug
Model No. KX-HNA101AZ
Thank you for purchasing a Panasonic product.
This document explains how to install the smart plug properly.
For details about how to use the system, refer to the User’s Guide
(page 10).
Please read this document before using the unit and save it for future
reference.
Table of Contents
Important Information
About this system ......................3
For your safety ...........................
Important safety instructions ......5
For best performance ................5
Other information .......................5
Setup
Part names and functions ..........7
LED indicator .............................7
Setup overview ..........................7
Connections ...............................8
Registering the smart plug .........9
Wireless communication
range .........................................9
Appendix
Testing the smart plug .............10
Features available when using the
[Home Network] app ................10
Accessing the User’s Guide ....10
Specifications ..........................11
Trademarks .............................11
Warranty (for New Zealand) ....12
3
2
About this system
R This system is an auxiliary system; it
is not designed to provide complete
protection from property loss.
Panasonic will not be held
responsible in the event that
property loss occurs while this
system is in operation.
R The system’s wireless features are
subject to interference, therefore
functionality in all situations cannot
be guaranteed. Panasonic will not
be held responsible for injury or
damage to property that occurs in
the event of wireless communication
error or failure.
For your safety
T
o prevent severe injury and loss of life/
property, read this section carefully
before using the product to ensure
proper and safe operation of your
product.
WARNING
Power connection
se only the power source marked
R U
on the product.
R Do not overload power outlets. This
can result in the risk of fire or electric
shock.
R Completely insert the product into
the power outlet. Failure to do so
may cause electric shock and/or
excessive heat resulting in a fire.
R Regularly remove any dust, etc.
from the product by pulling it from
the power outlet, then wiping with a
dry cloth. Accumulated dust may
Important Information
cause an insulation defect from
m
oisture, etc. resulting in a fire.
R Unplug the product from power
outlets if it emits smoke, an
abnormal smell, or makes an
unusual noise. These conditions can
cause fire or electric shock. Confirm
that smoke has stopped emitting
and contact an authorised service
centre.
R Unplug from power outlets and
never touch the inside of the product
if its casing has been broken open.
Danger of electric shock exists.
R Never touch the plug with wet
hands. Danger of electric shock
exists.
R Do not connect non-specified
devices.
R Before connecting an electric device
to this product, make sure the
electric device meets the
specifications described on
page 11. Using unspecified
devices may cause fire or smoke.
Installation
nstall this product in accordance
R I
with the provided instructions.
R To prevent the risk of fire or
electrical shock, do not expose the
product to rain or any type of
moisture.
R Do not place or use this product
near automatically controlled
devices such as automatic doors
and fire alarms. Radio waves
emitted from this product may cause
such devices to malfunction
resulting in an accident.
R Panasonic will not be held
responsible for damage or injury
caused by improper connection,
installation, or usage.
3
Important Information
R I
t is advised not to use the
equipment at a refuelling point.
Users are reminded to observe
restrictions on the use of radio
equipment in fuel depots, chemical
plants or where blasting operations
are in progress.
Operating safeguards
nplug the product from power
R U
outlets before cleaning. Do not use
liquid or aerosol cleaners.
R Do not disassemble the product.
R Never put metal objects inside the
product. If metal objects enter the
product, turn off the circuit breaker
and contact an authorised service
centre.
R Use this product to supply power
only to devices which can be
operated safely remotely. Do not
connect the following.
– Cooking appliances, irons, or
other devices that generate a
large amount of heat. There is a
risk of fire, burns, and injury.
– Power tools, electric machinery,
or other devices that could cause
injury and therefore must be used
under direct, careful observation.
– Heating or cooling devices, or any
type of device which could cause
health risks, particular to the
elderly or to small children, and
therefore should be used only
when usage conditions can be
confirmed.
– Medical devices. This product is
not intended to be used when
providing medical care.
Medical
onsult the manufacturer of any
R C
personal medical devices, such as
pacemakers or hearing aids, to
d
etermine if they are adequately
shielded from external RF (radio
frequency) energy. DECT features
operate between 1.88 GHz and
1.90 GHz with a peak transmission
power of 250 mW.
R Do not use the product in health
care facilities if any regulations
posted in the area instruct you not to
do so. Hospitals or health care
facilities may be using equipment
that could be sensitive to external
RF energy.
CAUTION
Installation and location
ever install the product during a
R N
lightning storm.
R The socket-outlet shall be installed
near the equipment and shall be
easily accessible.
General notices
his equipment will be inoperable
R T
when mains power fails.
R When a failure occurs which results
in the internal parts becoming
accessible, disconnect the power
supply cord immediately and return
this unit to an authorised service
centre.
R To minimise the possibility of
lightning damage, when you know
that a thunderstorm is coming, we
recommend that you unplug the AC
adaptor from the AC power outlet.
4
Important safety instructions
When using your product, basic safety
precautions should always be followed
to reduce the risk of fire, electric shock,
and injury to persons, including the
following:
1. Do not use this product near water
for example, near a bathtub,
washbowl, kitchen sink, or laundry
tub, in a wet basement or near a
swimming pool.
SAVE THESE INSTRUCTIONS
For b
est performance
Hub location/avoiding noise
T
he hub and other compatible
Panasonic devices use radio waves to
communicate with each other.
R For maximum coverage and
noise-free communications, place
your hub:
– at a convenient, high, and central
location with no obstructions
between the product and hub in
an indoor environment.
– away from electronic appliances
such as TVs, radios, personal
computers, wireless devices, or
other phones.
– facing away from radio frequency
transmitters, such as external
antennas of mobile phone cell
stations. (Avoid putting the hub
on a bay window or near a
window.)
Important Information
R I
f the reception for a hub location is
not satisfactory, move the hub to
another location for better reception.
Environment
eep the product away from
R K
electrical noise generating devices,
such as fluorescent lamps and
motors.
R The product should be kept free
from excessive smoke, dust, high
temperature, and vibration.
R The product should not be exposed
to direct sunlight.
R Do not place heavy objects on top of
the product.
R When you leave the product unused
for a long period of time, unplug the
product from the power outlet.
R The product should be kept away
from heat sources such as radiators,
cookers, etc. It should not be placed
in rooms where the temperature is
less than 0 °C or greater than 40 °C.
Damp basements should also be
avoided.
R Operating the product near electrical
appliances may cause interference.
Move away from the electrical
appliances.
Other information
Routine care
R W
ipe the outer surface of the
product with a soft moist cloth.
R Do not use benzine, thinner, or any
abrasive powder.
5
Loading...